Hearth and Home Technologies 43ST-ACC Bedienungsanleitung
- Schauen Sie die Anleitung online durch oderladen Sie diese herunter
- 48 Seiten
- 3.49 mb
Zur Seite of
Ähnliche Gebrauchsanleitungen
-
Stove
Hearth and Home Technologies 31ST-ACC
48 Seiten 3.53 mb -
Stove
Hearth and Home Technologies CASTILE-CSB
48 Seiten 3.1 mb -
Stove
Hearth and Home Technologies 823-0170 - MBK
40 Seiten 4.09 mb -
Stove
Hearth and Home Technologies 810-02901 (MBK)
48 Seiten 3.25 mb -
Stove
Hearth and Home Technologies CASTILE-MBK1
48 Seiten 3.1 mb -
Stove
Hearth and Home Technologies CASTILE-PMH1
48 Seiten 3.1 mb -
Stove
Hearth and Home Technologies 43M-ACC-MBK
48 Seiten 3.49 mb -
Stove
Hearth and Home Technologies SANTAFE-B1
48 Seiten 4.37 mb
Richtige Gebrauchsanleitung
Die Vorschriften verpflichten den Verkäufer zur Übertragung der Gebrauchsanleitung Hearth and Home Technologies 43ST-ACC an den Erwerber, zusammen mit der Ware. Eine fehlende Anleitung oder falsche Informationen, die dem Verbraucher übertragen werden, bilden eine Grundlage für eine Reklamation aufgrund Unstimmigkeit des Geräts mit dem Vertrag. Rechtsmäßig lässt man das Anfügen einer Gebrauchsanleitung in anderer Form als Papierform zu, was letztens sehr oft genutzt wird, indem man eine grafische oder elektronische Anleitung von Hearth and Home Technologies 43ST-ACC, sowie Anleitungsvideos für Nutzer beifügt. Die Bedingung ist, dass ihre Form leserlich und verständlich ist.
Was ist eine Gebrauchsanleitung?
Das Wort kommt vom lateinischen „instructio”, d.h. ordnen. Demnach kann man in der Anleitung Hearth and Home Technologies 43ST-ACC die Beschreibung der Etappen der Vorgehensweisen finden. Das Ziel der Anleitung ist die Belehrung, Vereinfachung des Starts, der Nutzung des Geräts oder auch der Ausführung bestimmter Tätigkeiten. Die Anleitung ist eine Sammlung von Informationen über ein Gegenstand/eine Dienstleistung, ein Hinweis.
Leider widmen nicht viele Nutzer ihre Zeit der Gebrauchsanleitung Hearth and Home Technologies 43ST-ACC. Eine gute Gebrauchsanleitung erlaubt nicht nur eine Reihe zusätzlicher Funktionen des gekauften Geräts kennenzulernen, sondern hilft dabei viele Fehler zu vermeiden.
Was sollte also eine ideale Gebrauchsanleitung beinhalten?
Die Gebrauchsanleitung Hearth and Home Technologies 43ST-ACC sollte vor allem folgendes enthalten:
- Informationen über technische Daten des Geräts Hearth and Home Technologies 43ST-ACC
- Den Namen des Produzenten und das Produktionsjahr des Geräts Hearth and Home Technologies 43ST-ACC
- Grundsätze der Bedienung, Regulierung und Wartung des Geräts Hearth and Home Technologies 43ST-ACC
- Sicherheitszeichen und Zertifikate, die die Übereinstimmung mit entsprechenden Normen bestätigen
Warum lesen wir keine Gebrauchsanleitungen?
Der Grund dafür ist die fehlende Zeit und die Sicherheit, was die bestimmten Funktionen der gekauften Geräte angeht. Leider ist das Anschließen und Starten von Hearth and Home Technologies 43ST-ACC zu wenig. Eine Anleitung beinhaltet eine Reihe von Hinweisen bezüglich bestimmter Funktionen, Sicherheitsgrundsätze, Wartungsarten (sogar das, welche Mittel man benutzen sollte), eventueller Fehler von Hearth and Home Technologies 43ST-ACC und Lösungsarten für Probleme, die während der Nutzung auftreten könnten. Immerhin kann man in der Gebrauchsanleitung die Kontaktnummer zum Service Hearth and Home Technologies finden, wenn die vorgeschlagenen Lösungen nicht wirksam sind. Aktuell erfreuen sich Anleitungen in Form von interessanten Animationen oder Videoanleitungen an Popularität, die den Nutzer besser ansprechen als eine Broschüre. Diese Art von Anleitung gibt garantiert, dass der Nutzer sich das ganze Video anschaut, ohne die spezifizierten und komplizierten technischen Beschreibungen von Hearth and Home Technologies 43ST-ACC zu überspringen, wie es bei der Papierform passiert.
Warum sollte man Gebrauchsanleitungen lesen?
In der Gebrauchsanleitung finden wir vor allem die Antwort über den Bau sowie die Möglichkeiten des Geräts Hearth and Home Technologies 43ST-ACC, über die Nutzung bestimmter Accessoires und eine Reihe von Informationen, die erlauben, jegliche Funktionen und Bequemlichkeiten zu nutzen.
Nach dem gelungenen Kauf des Geräts, sollte man einige Zeit für das Kennenlernen jedes Teils der Anleitung von Hearth and Home Technologies 43ST-ACC widmen. Aktuell sind sie genau vorbereitet oder übersetzt, damit sie nicht nur verständlich für die Nutzer sind, aber auch ihre grundliegende Hilfs-Informations-Funktion erfüllen.
Inhaltsverzeichnis der Gebrauchsanleitungen
-
Seite 1
R www .quadrare.com 7037-135E September 1, 2008 DO NOT DISCARD THIS MANUAL CAUTION • Important operating and maintenance in - structions included. • Leave this manual with party responsible for use and operation. • Read, understand and follow these instructions for safe installation and operation. DO NOT DISCARD WAR NING If the inf orma ti[...]
-
Seite 2
Page 2 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Hearth & Home T echnologies welcomes you to our tradi - tion of excellence! In choosing a Quadra-Fire appliance, you have our assurance of commitment to quality , durabil - ity , and performance. This commitment begins with our research of the market, including ‘V oice of the C[...]
-
Seite 3
September 1, 2008 7037-135E Page 4300 Wood Stove Series (ACC) R Section 1: Listing and Code Approvals A. Appliance Certications ...................... 4 B. Mobile Home Approved ...................... 4 C. Glass Specications ............................ 4 D. BTU & Efciency Specications .......... 4 Section 2: Getting Started A. D[...]
-
Seite 4
Page 4 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) 1 Listing and Code Approvals The Quadra-Fire 400 Series Wood Stove (ACC) meets the U.S . E nvi ronm enta l Prot ecti on Ag ency ’s 19 90 par tic ulat e emission standards. A. Appliance Certication C. Glass Specications D. BTU & Efciency Specications This stove is[...]
-
Seite 5
September 1, 2008 7037-135E Page 5 4300 Wood Stove Series (ACC) R 2 Getting Started A . Design, Installation & Location Consider ations Consideration must be given to: • Safety • Convenience • T rafc ow • Chimney and chimney connector required It is a good idea to plan your insta llati on on paper , usin g exact measurements for c[...]
-
Seite 6
Page 6 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Marginal Location: • Below peak Location NOT recommended: • Not the highest point of the roof • Wind loading possible Multi-level Roofs Windward Leeward Recommended: Outside Air Intake on windward side NOT recommended: Outside Air Intake on leeward side Recommended Location: ?[...]
-
Seite 7
September 1, 2008 7037-135E Page 7 4300 Wood Stove Series (ACC) R Exterior conditions such as roof line, surrounding trees, prevailing winds and nearby hills can influence stove pe rf orm anc e. Y ou r loca l dea ler is the expe rt in yo ur ge ogra phic area and can usually make suggestions or discover solutions that will easily correct your ue [...]
-
Seite 8
Page 8 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Floor Protector Chimn ey Conn ecto r Insula ted " T " Flashi ng Li s te d T e r min a tion C a p T r im Coll ar on I n s i d e W a ll Li sted Chi mney Storm Coll ar W a ll Su ppo r t Roo f Brace (if require d) Thimbl e Floor Protector Thimble, 12" (305mm) Of Brick Ceil[...]
-
Seite 9
September 1, 2008 7037-135E Page 9 4300 Wood Stove Series (ACC) R 3 Dimensions and Clearances 28-7/16 in.(722mm) 26-5/16 in. (668mm) 15 -5/ 8 in . (3 97 mm) 1 1-1/2 in. (292mm) 16 in. (406mm) 20-3/4 in. (527mm) C L 4-1/2 in (108mm) Outside Air Connection A. Appliance Dimensions Figure 9.1 Front View Figure 9.2 Side View NOTE: Flue Collar size is 6 [...]
-
Seite 10
Page 10 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Appliance Dimensions (Cont’d) Figure 10.1 Figure 10.2 Figure 10.3 Figure 10.4 4300 Step Top Pedestal Model 4300 Step Top Leg Model 2-7/8 in. (606m m) -7/1 6 in. (849m m) 15-1/1 6 in. (8m m) 19-1/1 6 in. (484m m) 10-15 /16 in. (278m m) 14-15 /16 in. (79m m) 3-1 1/[...]
-
Seite 11
September 1, 2008 7037-135E Page 1 1 4300 Wood Stove Series (ACC) R B. Clearances to Combustibles (UL and ULC) BAC K WA LL / SIDE W ALL CORNER INST ALLA TIO N 90° OFF TOP UP & OUT CEIL ING CLEARA NCE STOVE T O CEIL ING CLEARA NCE ALCOVE TOP VIEW A B ALCOVE SIDE VI EW NOTE: Clearances may only be reduced by means approved by the regulatory auth[...]
-
Seite 12
Page 12 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) A. Hearth Protection Requirements FLOOR PROTECTION: Floor protector must be non-com - bustible material, extending beneath heater and to the front, sides and rear as indicated. The oor must be non-com - bustible or otherwise adequately protected from radiant heat given off by the[...]
-
Seite 13
September 1, 2008 7037-135E Page 1 4300 Wood Stove Series (ACC) R Must ext end 2 in. (51m m) beyond each side of pipe (shad ed are a) NOTE: • Illustrations and photos reect typical installations and are FOR DESIGN PURPOSES ONL Y . • Illustrations/diagrams are not drawn to scale. • Actual installation may vary due to individual design pr[...]
-
Seite 14
Page 14 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) B. Outside Air Kit Installation 1. Remove all materials from packing box. 2. Using a #2 Phillips screw driver attach the ex adapter to the stove using 4 screws. Figure 14.1. . Remove circular” knock-out” in the base of the pedestal. 4. Floor & Rear Installation: Cut a [...]
-
Seite 15
September 1, 2008 7037-135E Page 15 4300 Wood Stove Series (ACC) R C. Blower (Optional) NOTE: The blower cord is equipped with a pronged (grounding) plug for your protection against shock hazard. Do not remove. 1. Remove the bolts (1/4”-20 Phillips head) on the outer skin at the bottom rear of appliance. 2. Align holes in mounting ange[...]
-
Seite 16
Page 16 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) NOTE: I n Canada when using a factory-built chimney it must be safety listed, Type UL103 HT (2100 o F) CLASS “A” or conforming to CAN/ULC-S629M, STANDARD FOR 650 o C FACTORY-BUILT CHIMNEYS. 5 Chimney Requirements Floor Protector Ch i mn ey Con necto r Insula t ed " T "[...]
-
Seite 17
September 1, 2008 7037-135E Page 17 4300 Wood Stove Series (ACC) R Thimble Site constructed for masonry chimney installation: Components • A minimum length of 12 inches [05mm] (longer for thicker walls) of solid insulated factory-built chimney length constructed to UL 10 T ype HT 6 inch (152mm) inside diameter . Chimney needs to extend a mi[...]
-
Seite 18
Page 18 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Chimney Height / Rise and Run Th is pro duct was des igne d for an d tes ted on a 6 inch (152 mm) chimney , 14 to 16 feet (420-480cm) high, (includes stove heig ht) measure d from the base of the applia nce. The furt her your stack height or diameter varies from this conguration,[...]
-
Seite 19
September 1, 2008 7037-135E Page 19 4300 Wood Stove Series (ACC) R D. Chimney T ermination Requirements Follow manufacturers instructions for clearance, securing, ashing and terminating the chimney . • Must have an approved and listed cap • Must not be located where it will become plugged by snow or other material • Must terminate at least[...]
-
Seite 20
Page 20 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) 6 Mobile Home Installation 10 . Burn wood only . Other types of fuels may generate poisonous gases (e.g., carbon monoxide). 1 1. If unit burns poorly while an exhaust blower is on in home, (i.e., range hood), increase combustion air . 12. In stal lati on shal l be in acco rdan ce wi[...]
-
Seite 21
September 1, 2008 7037-135E Page 21 4300 Wood Stove Series (ACC) R 7 Appliance Set Up Figure 21.3 Do NOT operate before fully assembling components. Burning your stove without a pedestal or leg kit attached: • Will void your warranty . • May result in property damage or personal injury . W ARNING NOTE: The Ash Removal System, must be installed [...]
-
Seite 22
Page 22 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Pedestal and Ash Removal System (Cont’d) Figure 22.3 Grate ARS Channel Replace bo th bricks back into f irebox Figure 22.2 Cover Plate Ash Re movel Drawer Adapters Oak Pedestal T rim Figure 22.1 Installing Pedestal Assembly 1. Remove screws on adapter and slide pedestal over adapt[...]
-
Seite 23
September 1, 2008 7037-135E Page 2 4300 Wood Stove Series (ACC) R B. Leg Kit and Ash Removal Installation (ARS) for Step Top Uni-Body Do NOT tilt the unit on the cast iron legs. • Tilting could lead to property damage. • Lift the unit upright and place it into position on the oor protector . CAUTION Lay stove flat on its back on protectiv[...]
-
Seite 24
Page 24 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) N OTE: When the speed control is turned clockwise, it will click on to high speed. Continue to turn the speed control clockwise to decrease the speed. At full clockwise, the blower should blow gently , but should not stop. 1. With the appliance plugged in, turn the speed control kno[...]
-
Seite 25
September 1, 2008 7037-135E Page 25 4300 Wood Stove Series (ACC) R 8 Operating Instructions B. Wood Selection & Storage Burn only dry seasoned wood. Store wood under cover , out of the rain and snow . Dry and well-seasoned wood will not only minimize the chance of creosote formation, but will give you the most efcient re. Even dry wood co[...]
-
Seite 26
Page 26 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) 2. Second Stage The next stage of burning, the secondary stage, is the period when the wood gives off ammable gases which burn above the fuel with bright ames. During this stage of burning it is very important that the ames be maintained and not allowed to go out. This will[...]
-
Seite 27
September 1, 2008 7037-135E Page 27 4300 Wood Stove Series (ACC) R F . Burn Rates and Operating Efciency For maximum operating efciency 1. This appliance has a timer system (ACC) that operates the stove at its maximum efciency removing any guess work for the homeowner . Follow the instructions below for each burn rate for the Start-Up Air [...]
-
Seite 28
Page 28 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) G. Building A Fire Before lighting your rst re in the stove: 1. Conrm the bafe is correctly positioned. It should be even with the front tube and resting on all tubes. Figure 28.1. 2. Follow instructions on page 32 for cleaning plated sur - faces, if applicable. . Rem[...]
-
Seite 29
September 1, 2008 7037-135E Page 29 4300 Wood Stove Series (ACC) R CORRECT POSITION Ceramic Blanket and Bafe Board are NOT in contact with the back of the rebox. Ceramic Blanket is NOT in contact with the back of the rebox and NOT even with the Baf - e Board in the front. Ceramic Blanket is bunched up at the back of the rebox and NOT[...]
-
Seite 30
Page 0 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) J. Opacity (Smoke) This is the measure of how cleanly your appliance is burn - ing. Opacity is measured in percent; 100% opacity is when an object is totally obscured by the smoke column from a chimney , and 0% opacity means that no smoke column can be seen. As you become familiar[...]
-
Seite 31
September 1, 2008 7037-135E Page 1 4300 Wood Stove Series (ACC) R 9 Maintaining & Servicing Y our Appliance A. General Maintenance Inspe ction : Inspe ct the system at the applian ce connec tion and at the chimney top. Cooler surfaces tend to build creosote deposits quicker , so it is important to check the chimney from the top as well as fr[...]
-
Seite 32
Page 2 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) 4. Cleaning Plated Surfaces • Frequency: Prior to first burn and then as desired • By: Homeowner Clean all the ngerprints and oils from plated surfaces BEFORE ring the appliance for the rst time. If not cleaned properly before lighting your rst re, the oils can [...]
-
Seite 33
September 1, 2008 7037-135E Page 4300 Wood Stove Series (ACC) R B. Glass Replacement 1 . Ensure that the re is out and the appliance is cool to the touch. 2. Protect a table or counter top with padding or towels. Protect your hands and wear gloves to prevent injury . . Remove the door with the broken glass by lifting the door up and of[...]
-
Seite 34
Page 4 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Replace the rebrick if they become crumbly and/or if there is a 1/4 inch (6.5mm) gap between the bricks. Inspect the rebrick after each ash removal. The rebox is lined with high quality rebrick, which has exceptional insulating properties. There is no need to use a [...]
-
Seite 35
September 1, 2008 7037-135E Page 5 4300 Wood Stove Series (ACC) R D. Bafe Removal 1. Remove all ash from the rebox, and extinguish all hot embers before disposal into a metal container . 2. The bafe board has 2 pieces. With the ceramic blanket still in place, slide one bafe piece over the top of other one and pull out top piece throu[...]
-
Seite 36
Page 6 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) F . T ube Channel Assembly Replacement Removing Tube Channel Assembly 1. Remove the right side shield by removing 2 screws in the back using a Phillips head screw driver. 2. Remove 4 screws from channel access cover and remove cover. . Locate 2 channel nuts inside of chamber an[...]
-
Seite 37
September 1, 2008 7037-135E Page 7 4300 Wood Stove Series (ACC) R 10 T roubleshooting With proper installation, operation, and maintenance your woodstove will provide years of trouble-free service. If you do experience a prob - lem, this troubleshooting guide will assist a qualied service person in the diagnosis of a problem and the correctiv[...]
-
Seite 38
Page 8 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) 1 1 Reference Materials Figure 38.1 - Door , Glass And Door Handle Assembly A. Exploded view Figure 38.2 - Burn Rate Air & Start-Up Air Controls Glass Size: 15-1/2” wide x 1-/8” high 42 43 44 45 46 47 48 31 30 40 32 41 Item Description Part No. 30 Hinge Pins Gold: 83[...]
-
Seite 39
September 1, 2008 7037-135E Page 9 4300 Wood Stove Series (ACC) R SIZES (#) Bafe Board: 9-1/2” w x 15-/4” h, each (#29) Ceramic Blanket: 19” w x 1-/4” h, 1/2” thick Figure 39.1 Millennium Model 1 21 2 3 4 6 7 9 10 12 13 14 17 18 19 20 22 23 24 25 26 27 28 29 30 31 32 33 34 16 5 49 Item Description Item Description 1 T[...]
-
Seite 40
Page 40 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) SIZES (#) Bafe Board: 9-1/2” w x 15-/4” h, each (#29) Ceramic Blanket: 19” w x 1-/4” h, 1/2” thick Figure 40.1 Step-T op Uni-Body Model 1 4 5 6 7 9 10 12 13 16 17 18 19 20 21 22 2 25 26 29 30 31 2 33 34 35 36 37 39 50 14 28 52 49 51 Item Description[...]
-
Seite 41
September 1, 2008 7037-135E Page 41 4300 Wood Stove Series (ACC) R IMPORT ANT : THIS IS DA TED INFORMA TION . When requesting a part for your appliance, please supply serial number and model name/number to ensure correct service parts. All parts may be order from an authorized dealer . B. Service Parts & Accessories ITEM # SERVICE PARTS PART NO[...]
-
Seite 42
Page 42 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Component Pack, Millennium Model, Nickel (includes T ouch-up Paint, Nickel Spring Handles (1) 1/2 inch and (2) 1/4 inch, T rimount Plug, Owner ’s Manual, W arranty Card) 7037-015 Component Pack, Step-T op Model (includes T ouch-up Paint, Owner ’s Manual, W ar - ranty Card). Spri[...]
-
Seite 43
September 1, 2008 7037-135E Page 4 4300 Wood Stove Series (ACC) R Pedestal (only) Assembly, Step-Top Model 7033-013 2 Pedestal Base, Millennium Model 7033-163 3 Pedestal Riser , Millennium Model 70-207 26 Rear Air Channel Assembly 70-002 Rope, Door , /4 in. x 84 in., eld cut to size 82-1680 47 Screws, Glass Frame, tabs are n[...]
-
Seite 44
Page 44 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) Date of Service Performed By Description of Service C. Service And Maintenance Log[...]
-
Seite 45
September 1, 2008 7037-135E Page 45 4300 Wood Stove Series (ACC) R D. Homeowner ’ s Notes[...]
-
Seite 46
Page 46 7037-135E September 1, 2008 R 4300 Wood Stove Series (ACC) E. W arranty Policy Hearth & Home Technologies LIMITED WARRANTY Hearth & Home Technologies (“HHT”) and its respective brands extends the following warranty for HHT gas, wood, pellet and electric appliances purchased from an authorized HHT dealer and installed in the Unit[...]
-
Seite 47
September 1, 2008 7037-135E Page 47 4300 Wood Stove Series (ACC) R HHT’s obligation under this warranty does not extend to damages resulting from: (1) installation, operation or main - tenance of the appliance not in accordance with the installation instructions; operating instructions and the listing agent identication label furnished [...]
-
Seite 48
R Hearth & Home T echnologies 1445 North Highway Colville, W A 991 14 Division of HNI INDUSTRIES 7037-135E September 1, 2008 Page 48 CONT ACT INFORMA TION : Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer , log onto www .quadrare.com This product may be covered by one o[...]