Western Digital TS-EC1279U-RP Bedienungsanleitung

QNAP Turbo NAS Hardware User Manual ©Copyright 2011. QNAP Systems, Inc. All Rights Reserved.[...]

T hank you for choosing QNAP products! This user manual provides description of the hardware of the T urbo NAS and relev ant guid eline of certain funct i ons. Please read carefully and strictly adhere to the instructions of the manual. This user manu al is applicable to the follow ing T u rbo NAS models: TS-110, TS-210, TS-410, T S-410U, TS-112, T[...]

DIS CLAIMER In no event shall t he liability of QN AP System s, Inc. (QNAP) ex ceed the price paid for the product from direct, indirect, special, inci dental, or consequential softwa re, or its documentation. QNAP mak es no warr anty or representation, expressed, implied, or statutory , with respect to its products or the contents or us e of this [...]

Regulat ory Notice FCC STATEMENT This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to P art 15 of FCC Rules. These limits are designed to provide reasonable protection against h armful interferen ce in a residential inst allation. Th is equipment generates, uses, and c an radi ate radio frequ[...]

Symbols in this document Wa r n i n g T his icon indicates the instructions must be strictly followed. F ailure to do so could result in injury to huma n body or death. Caution This icon indicates th e action may lead to disk clearance or loss OR failure to follow the instruction s could result in data damage, disk damage, or product damage. 5[...]

Table of Contents T able of Contents .............................................................................................................. .................................... 6 Safety W arnings ............................................................................................................... ..................................[...]

Safety Warnings 1. The NAS can oper ate normally in the temp erature of 0º C–40ºC a nd relative humidity of 0%–95%. Please make sure th e environment is well-ventilated. 2. The power cord and devices co nnected to the NAS must pro vide correct supply voltage (100W , 90–264V). 3. Do not place the NAS in direct sunlight or near chemicals. Mak[...]

Chapter 1. CPU and Memory Specifications Caution: Modifying the hardware, soft ware, or firmware of the QN AP products will void the warranty . QNAP is not responsible fo r any form of damage or loss of data caused by modding the QNAP products. Users should bear their own risks of all sorts of possible data loss or system instabilities due to chang[...]

System TS-112 TS-212 CPU Marvell 1.2GHz Marvell 1.2GHz Memory 256MB DDR2 256MB DDR2  Flash 16MB 16MB CPU replaceable No No Memory replaceable No No Number of SODIMM slots 0 0 Number of hard drive slots 1 2 System TS-412 TS-412U CPU Marvell 1.2GHz Marvell 1.2GHz Memory 256MB DDR2 256MB DDR2 Flash 16MB 16MB CPU replaceable No No Memory replaceable[...]

System TS-119 TS-219P TS-419P, TS-419U CPU Marvell 1.2GHz Marvell 1.2GHz Marvell 1.2GHz Memory 512MB DDR2 512MB DDR2 512MB DDR2 Flash 16MB 16MB 16MB CPU replaceable No No No Memory replaceable No No No Number of SODIMM slots 0 0 0 Number of hard drive slots 1 2 4 System TS-119P+ TS-219P+ TS-419P+, TS-419U+ CPU Marvell 1.6GHz Marvell 1.6GHz Marvell [...]

System TS-119P II TS-219P II TS-419P II CPU Marvell 2.0GHz Marvell 2.0GHz Marvell 2.0GHz Memory 512MB DDR3 512MB DDR3 512MB DDR3 Flash 16MB 16MB 16MB CPU replaceable No No No Memory replaceable No No No Number of SODIMM slots 0 0 0 Number of hard drive slots 1 2 4 11[...]

System TS-239 Pro SS-439 Pro, TS-439 Pro, TS-439U-RP, TS-439U-SP TS-239 Pro II TS-439 Pro II CPU Intel Atom processor (1.60 GHz) Intel Atom processor (1.60 GHz) Intel Atom processor (1.66 GHz) Intel Atom processor (1.66 GHz) Memory 1GB DDR2 1GB DDR2 1GB DDR2 1GB DDR2 Flash 128MB (IDE DOM) 128MB (IDE DOM) 512MB (USB DOM) 512MB (USB D OM) CPU replace[...]

System TS-639 Pro SS-839 Pro CPU Intel Atom processor (1.60 GHz) Intel Atom processor (1.60 GHz) Memory 1GB DDR2 2GB DDR2 Flash 128MB (IDE DOM) 128MB (IDE DOM) CPU replaceable No No Memory replaceable  Compatible with DDR2 667 DRAM  Can be upgr aded to max 2GB  Compatible wi th DDR2 667 DRAM  Can be upgraded to max 2GB Number of SODIMM [...]

System TS-259 Pro TS-459 Pro TS-459U-RP/SP CPU Dual core Intel Atom processor (1.66 GHz) Dual core Intel Atom processor (1.66 GHz) Dual core Intel Atom processor (1.66 GHz) Memory 1GB DDR2 1GB DDR2 1GB DDR2 Flash 512MB (USB DOM) 512MB (US B DOM) 512MB (USB DOM) CPU replaceable No No No Memory replaceable Compatible with DDR2 667 DRAM Compatible wit[...]

System TS-259 Pro+ TS-459 Pro+ TS-459U-RP/SP+ CPU Dual core Intel Atom processor (1.80 GHz) Dual core Intel Atom processor (1.80 GHz) Dual core Intel Atom processor (1.80 GHz) Memory 1GB RAM 1GB RAM 1GB RAM Flash 512MB (USB DOM) 512MB (USB DOM) 512MB (USB DOM) CPU replaceable No No No Memory replaceable Ye s Ye s Ye s Number of SODIMM slots 1 1 1 N[...]

System TS-459 Pro II TS-559 Pro II TS-659 Pro II CPU Dual core Intel Atom processor (1.80 GHz) Dual core Intel Atom processor (1.80 GHz) Dual core Intel Atom processor (1.80 GHz) Memory 1GB DDR3 (Expandable RAM, up to 3GB) 1GB DDR3 (Expandable RAM, up to 3GB) 1GB DDR3 (Expandable RAM, up to 3GB) Flash 512MB (USB DOM) 512MB (US B DOM) 512MB (USB DOM[...]

System TS-879 Pro TS-1079 Pro TS-879U-RP CPU Intel Core i3 Dual Core (3.30 GHz) Intel Core i3 Dual Core (3.30 GHz) Intel Core i3 Dual Core (3.30 GHz) Memory 2GB DDR3 RAM 2GB DDR3 RAM 2GB DDR3 RAM Flash 512MB (USB DOM) 512MB (US B DOM) 512MB (USB DOM) CPU replaceable No No No Memory replaceable No No Y es Number of LONG-DIMM slot 2 2 2 Number of har[...]

Chapter 2. Power Button and Reset Button Behavior  P ower button: Press to turn on or turn o ff . System Power button (Turn on) Power button (Hardware turn off) Power button (Force turn off) All models Press once 1.5 sec 5 sec  R eset button: Press to reset the system setti ngs. System Basic system reset (1 beep) Advanced system reset (2 beep[...]

Advanced system reset (10 sec) Press the reset button for 10 seconds; you will hear two beeps at the th ird and the tenth seconds. The NAS will reset all the sy stem settings to default as it does by web-based system reset in “ Administration” > “Restore to F actory Default” except all the data are reserved. The settings such as the user[...]

Chapter 3. USB One Touch C opy System Number of seconds (press the one touch c opy button to trigger data copy) All NAS models 0.5 sec Data Copy by the Front USB Por t The NAS supports insta nt data copy backup from the external USB devic e to the NAS or the other way round by the front one to uch copy button. T o use this functi on, follow the ste[...]

Chapter 4. LED and Alarm Buzzer Specifications The LED indicators of the NA S indicate the sy stem status and inform ation. When the NAS is turned on, check the following ite ms to make sure the sy stem status is normal. Note that the follow ing LED informat ion is applicable only wh en users have properly installed the hard drive, and co nnected t[...]

Or ange The NAS is connected to the network LAN Orange Flashes orange The NAS is being accessed from the network Green The 10GbE network expansio n card is installed 10 GbE 1 Green Off No 10GbE network expansion card is inst alled Flashes red The disk data is being accessed and a read/write error occurs during the process Re d A hard disk drive rea[...]

Beep alarm: All NAS models The beep alarm can be disabled in “Sys tem Ad ministra tion” > “Hardware Settings” . Beep sound Number of Times Description Short beep (0.5 sec) 1 1. The NAS is starting up 2. The NAS is being shut down (software shutdown) 3. The user presses the reset button to reset the NAS 4. The system firmw are has been up[...]

Chapter 5. Upgrade Memory on QNAP Turbo NAS (RAM Module Installation) Warning:  The following instructions should only be performed by an authorized and trained technician.  Strictly adhere to th e instructions to in stall a RAM module on the NAS. F ailure to do so could result in inju ry to human body or death. QNAP provides 1GB DDR3 RAM mod[...]

4. R emove the case cover of the NAS gently . 5. Lift up the Mylar sheet. Lo cate the memory slot. Make sure the slot i s empty . 6. Grasp the e dge of the memory module. A lign the notch o n the gold edge of the module with the notch in the memo ry slot. Slide the memory module to the slot at a 45-degree angle (approximately). 7. Gently press the [...]

8. R otate the memory module tow ards the motherboard unti l the securing clips cl icks into place. 9. Close the case cover and fasten the screws. Connect the power adaptor and cables back to the NAS. 10. T o check that the memory module is recognized by the NA S, power up the NAS and login the web interface as an administra tor . Go to "Syste[...]

5.2 TS-879U-RP, TS-1279U- RP, TS-EC879U-RP, TS-EC1279U-RP QNAP pro vides a 2GB DDR3* RAM module an d a 4GB DDR3 EC C** RAM module (optional purchase) for users to upgrade the memory of the NAS. I nsert an extra RAM mod ule on the motherboard of the NAS to upgr ade the memo ry . The total memory will be shown in “System Information” of the admin[...]

2. Hold t he notch at th e edge of the top cover . Remove the top cover in both hands. 3. Release the ejector clips gently by pulling the m out of the sides of the RAM slot. 28[...]

4. Gr asp the edge of the RAM module. Align the notch on the gold edge of the RAM module with th e notch in the RAM slot. Insert th e RAM module to the RAM slot unt il it cannot go any f urther . 29[...]

Chapter 6. Network Expansion Card Installation Warning:  The following instructions should only be performed by an authorized and trained technician.  Strictly adhere to the instruct ions to install a netw ork expansion card on the NAS. F ailure to do so could result in injury to huma n body or death. The TS-x79 Pro series pro vides expansion[...]

Brack et C Network Expansion Card Compatibility Brack et A (X520- T2) Intel ® Ethernet Server Adapter X520- T2 (E10G42B) Brack et B (X520-SR2/X520-DA2) 1. Intel ® Ethernet Server Adapter X520- SR2 (E10G42BFSR) 2. Intel ® Ethernet Server Adapter X520-DA2 (E10G42B TDA) Brack et C (Emu lex) 1. Emulex OneConnect 10GbE Netw ork Adapters, SFP+ Direct [...]

1. T urn off the NA S. Disconnect the power adaptor , network cable(s), and an y other connectors or cables from the NAS . 2. Before installing the network expansion card, pu t on a n antistatic wrist strap to prevent electrostatic discharge. The crocodile clip should be connected to the ground. 3. Loosen the seven screws on the rear of th e NAS. 4[...]

5. Loosen the screws and remove the expansion sl ot cover . 6. Gr asp the edge of the ne twork expansion card. Align the notch on the gold edge of the card with the notch in th e PCIe slot. Insert the network expansi on card to the PCIe slot until it cannot go any further . 33[...]

7. F asten the screws. 8. Close the case cover and fasten the screws. Connect the power adaptor and cables to the NAS. 9. T o check that the network expansion is reco gnized by the NAS , power up the NAS and login the web interface as an administr ator . Go to "System Admini strati on" > "Network" > "TCP/IP" and [...]

6.2 TS-879U-RP, TS-127 9U-RP 1. T urn off the NA S. Disconnect the power adaptor , network cable(s), and an y other connectors or cables from the NAS . 2. Before installing the network expansion card, pu t on a n antistatic wrist strap to prevent electrostatic discharge. The crocodile cl ip should be connected to the ground. 3. Loosen the two screw[...]

5. Loosen the screws and remove the cover of slot 1. 6. Gr asp the edge of the expansion card. Alig n the notch on the gold edge of the card with the notch i n the PCIe slot. Insert the network expansion card to the PCIe slot until it cannot go an y further . 36[...]

7. F asten the screws. 8. Close the case cover and fasten the screws. Connect the power adaptor and cables to the NAS. 9. T o check that the network expansion is reco gnized by the NAS , power up the NAS and login the web interface as an administr ator . Go to "System Admini strati on" > "Network" > "TCP/IP" and [...]

Chapter 7. Hot-swap Hard Drives The QNAP NAS is compatible with 2.5-inch/3.5-inch SA T A hard disk drives from majo r hard disk brands. Fo r the updated hard dr ive compatibility list, please visit http://www .qnap.com . Caution:  QNAP disclaims any respon sibility for product dama ge/malfunction or data loss/recovery due to misuse or improper i[...]

TS-509 Pro, TS-559 Pro , TS-639 Pro, TS-659 Pro, TS-809 Pro, TS-809U-RP , TS-859 Pro, TS-859U-RP , TS-259 Pro+, TS-459 Pro+, TS-559 Pro+, TS-659 Pro+, TS-859 Pro+, TS-859U-RP+, TS-412, TS-412U, T S-459 Pro II, TS-559 Pro II, TS-659 Pro II, TS-879 Pro, TS-1079 Pro, TS-879U -RP , TS-1279U-RP , TS-EC879U-RP , TS-EC1279U-RP SS-439 Pro, SS-839 Pro No Ye[...]

The NA S supports hot -swapping the hard drives when 1 member drive crashes in RAID 1, 1–2 member drives cra sh in RAID 5 or RAID 6. Follow the steps below to hot -swap the hard drive when a member drive fails in a RAID configuration. 1. Login the NAS and check the disk v olume configur ation in “V olume Management” . 2. The volume status sh [...]

Chapter 8. RAID Recovery The QNAP NAS supports exclusive RAID recovery techn ology to recover a failed RAID disk volume from uni ntentional disconnection or r emova l of the hard drives from t he system. Using the RAID recovery , users can recover an inactive RAID 1, RAID 5, or RAID 6 volume to degraded mode, or an inactive RAID 0 and JBOD configur[...]

Sta ndard RAID 5 QNAP RAID 5 Standard RAID 6 QNAP RAID 6 Degraded mode N-1 N-1 N-1 & N-2 N-1 & N-2 Re ad only protection (for immediate data backup & hard drive replacement) N/A N-1, bad blocks found in the surviving drives of the arra y . N/A N-2, bad blocks found in the surviving drives of the arra y . RAID recov ery (RAID status: Not[...]

Chapter 9. Use the LCD Panel This feature is only provided by the NAS models with LCD panels. Please visit http://www .qnap.com for details. The NAS pro vides a handy L CD panel for users to perform di sk configur ation and view the system information. When the NAS has started up, the server n ame and IP address will be shown. N A S 5 F 4 D E 3 1 6[...]

For example, whe n 5 hard drives installed ar e available on the NAS, the LCD panel shows: C o n f i g . D i s k s ? → R A I D 5 Press the “Select” button to browse mo re options, for example, RAID 6. Press the “Enter” button and th e following message shows. Press the “Select” button to select “Yes” to confirm. C h o o s e R A I [...]

T o encrypt the disk volume*, select “Y es” wh en the L CD panel shows <Encrypt V olume?>. The default encryption password is “admin” . T o change the password, please login the web-based administr ation interface as an admi nistrator and change th e settings in “Device Configuration” > “Disk volume Encry ption Management ”[...]

View s ystem information by the LCD panel When the LCD panel shows the server name and IP address, press the “Enter” button to enter the Main Menu. The Main Menu consists of the follow ing items: 1. TCP/IP 2. Physical disk 3. Volume 4. System 5. Shut down 6. Reboot 7. Password 8. Back 1. TCP/IP The following opt ions are available:  LAN1 IP [...]

2. Physical disk The following opt ions are available:  Disk Info  Back to Main Menu The disk info shows the temperature an d the c apacity of the hard drive. D i s k : 1 T e m p : 5 0 ° C S i z e : 2 3 2 G B 3. Vol ume This section shows the disk configuration of the NAS. The first line sh ows the RAID configuration and storage capacity; th[...]

4. Syst em This section shows the system temperature an d the rotation speed of the system fan. C P U T e m p : 5 0 ° C S y s T e m p : 5 5 ° C S y s F a n : 8 6 5 R P M 5. Shut down Use this option to turn off the NAS. Press the “Select” button to select “Yes”. Then press the “Enter” button to confirm. 6. Rebo ot Use this option to r[...]

Syst em Messages When the NAS encounters system error, an error message will be shown on the LCD pa nel. Press the “Enter” button to vi ew the message. Press the “Enter” button again to view the next message. S y s t e m E r r o r ! P l s . C h e c k L o g s System Message Description Sys. Fan Failed The system fan fails Sys. Overheat The s[...]

Chapter 10. Install Power Supply Unit * This section applies to rackmount NAS models only . The power supply units of TS-809U-RP/859U -RP+/879U-RP/EC879U -RP should only be replaced by an authorized and tr ained technician. 10.1 1U Turbo NAS T he following in structions sh ould only be performed by an authorized and trained technician. T o install [...]

4. F asten the screw tightly . 5. Tu r n o n t h e N A S . Note: T o replace a failed power su pply unit, tu rn off the N AS. Then remove the failed u nit safely and repeat steps 3-5 abov e to install a new power supply unit. 51[...]

Warning: The NAS supports replacing the red undant power supply unit witho ut turning off the server when redundant power supply mode is enabled. However , users are strongly recommended to turn OFF the NAS before replacing the power supply unit to reduce the risk of electric shock. A second power supply unit can be installed on a single po wer (SP[...]

3. Unplug the failed power supply . 4. Plug in a new power supply to the NA S. 5. Tu r n o n t h e N A S . 53[...]

10.3 2U Turbo NAS (except TS-127 9U-RP and TS-EC1279U-RP) T he following in structions sh ould only be performed by an authorized and trained technician. T o replace a failed power supply unit on a 2U T urbo NAS, follow the steps below . 1. T urn off the NAS . 2. Unfasten the screw on th e failed power supply in an anticlockwise direction . 3. Unpl[...]

4. Plug in the new power supply to the NA S. 5. F asten the screw on the power su pply in clockwise direction . 6. Tu r n o n t h e N A S . 55[...]

Enable warning aler t for redundant power supply on the web-based interface: If two power supply units (PSU ) have been inst alled on the NAS and connected to the power sockets, both PSU will supply the power t o the NAS (applied to 1U and 2U models). Users can enable redundant power supply mode in “System Admini stration” > “Hardw are” [...]

The foll owing description applies to 1U NAS models only. (1) Power supply indicators:  Green (left) power indicator: Indi cates th e power supply unit is in normal status .  R ed (right) power indicator: Indicates the power supply unit is in abnormal statu s. (2) Mute power alarm button: When an error is detected on power su pply unit, the s[...]

Technical Support QNAP provides dedicated online support an d c ustomer service via instant messenger . Online Support: ht tp://www.qnap.com MSN: q.support@hotmail .com Skype: qnapskype For u m : http://forum.qn ap.com Technical Support in the USA and Canada: Email: q_supportus@qnap.com TEL: 909-595-2819 Address: 166 University P arkway Pomona, CA [...]

GNU GENERAL PUBLIC LICENSE V ersion 3, 29 June 2007 Copyright © 2007 Free Software Found ation, Inc. <http://fsf .org/> Everyone is permitted to copy and distribute verbatim copies of this license document, bu t changing it is not allowed. Preamble The GNU Gener al Public License is a free, copyleft li cense for software and other kinds o f [...]

distribute and/or modif y it. For the developers' and authors' protection, the GPL clearly explains that there is no warr anty for this free softw are. Fo r both users' and a uthors' sake, the GPL requires tha t modified versio ns be marked as changed, so that their problems wi ll not be attributed erroneously to authors of prev[...]

A “co vered work” means either the unmodified Progr am or a work based on the Program. T o “propagate” a work means to do an ything with it t hat, without per mission, would make you directly or secondarily liab le for infrin gement under applicable copy right law, ex cept executing it on a computer or modifying a private copy . Propagation[...]

needed to gener ate, install, an d (for an executable work) run the object code and to modify the work, includi ng scripts to control those activiti es. However , it does not include the work's System Libr aries, or gener al-purpos e to ols or generally av ailable free programs which are used unmodified in perf orming those activities but whic[...]

measures. Wh en you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the exte nt such circ umvention is effected by exercising rights under this Licen se with respect to the covered work, and you disclaim any intention to limit operatio n or modification of the wor k as a means of enforcing, agai[...]

by their na ture extensions of the covered work , a nd which are not combined with it such as to form a larger program, in or on a volume of a stor age or distribution medium, is called an “aggregate” if the compilation an d its resulting copyright are not used to limit the access or legal rights of t he compilation's users beyond what the[...]

A separ able portion of the object code, whose source code is excluded from the Corresponding Source as a S ystem Library , ne e d not be included in conveying the object code work. A “User Product” is eit her (1) a “consumer product ” , which means any tangible person al property which is normally used for person al, family , or household [...]

C orresponding Source conveyed, and Installation Information provided, in accord with this section must be in a f ormat that is publicly docu mented (and with an implemen tation av ailable to the public in so urce code form), and m ust require no special password or key for unpacking, reading or copying. 7. Additional T erms. “ Additional permiss[...]

All ot her non-permissive additional terms are con sidered “further restrictions” within t he meaning of section 10. If the Program as you rece ived it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction , you may remove that term. If a license document contains a fur[...]

Y ou are not required to accept this License in order to receive or run a copy of the Progr am. Ancillary propagation of a covered work occurring solely a s a consequence of using peer-to-peer tr ansmission to receive a copy likewise does not require acceptance. However , nothing other than this Li cense grants y ou pe rmission to propagate or modi[...]

the ri ght to gr ant patent sublicenses in a mann er consistent wi th the requirements of thi s License. Each contributor gr ants you a non -exclusive , wo rldwide, royalty-free patent license under the contributor's essential pate nt claims, to mak e, use, sell, offer for sa le, import and otherwise run, modify and propag ate the contents of [...]

copi es), or (b) primarily for a nd in connection with specific products or compilation s that contain the covered wo rk, unless you ent ered into that arrangement, or that patent license was gr anted, prior to 28 March 2007. Nothing in this Licens e shall be construed as excluding or limit ing any implied license or other defenses to infringement [...]

71 If the Progra m specifies that a proxy can deci de which futu re versio ns of the GNU General Public License can be used, that pro xy's pu blic statement of acceptan ce of a version permanently authorizes yo u to choose that v ersion for the Progr am. Later license versions may give you addition al or different permissions. However , no add[...]