Wharfedale Pro L15T11W-A, L15T11W-C, L19T11W-A, L19T11W-C, L20T11W-A, L20T11W-C, L19T12W-A, L19T12W-C, L20T12W-A, L20T12W-C, L22T11W-A, L22T11W Bedienungsanleitung

USER'S MANUAL HD Ready Digital LCD TV Please read this manual carefully before using your television and keep this manual In a good place for future reference. MODEL: L15T11 W-A, L15T11 W-C,L19T11 W -A, L19T11 W-C, L20T11 W-A,L20T11 W -C, L19T12W-A, L19 T12W-C, L20T12W -A, L20T12W-C,L22T11 W-A,L22T11 W -C[...]

[...]

[...]

CONTENT Safety Not ice ... ......................................................................................... Front Pane l Cont rol................................................................................... Connection .. ............................................................................................ Remote Co ntrol .....[...]

Safety Notice To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television. l Please read all the instructions before operation; l Please keep the manual for future reference ; l Do not use any accessories that not recommended by manufacturer: l Before operation, make sure the operating voltage[...]

Front Panel Controls Control Panel Function 1. Standby switch 2.SOURCE Select the input signals: PC/COMPONENT/DVD/HDMI/ TV/SCART/S-VIDEO 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ V olume up / Right orientation to adjust the item/Press to enter 5. CH- TV channel down / to select t[...]

Connection Options COMPONENT Input Connect a component video/audio device to these jacks VGA Input Connect to the VGA 15PIN analog output connector of the PC display card for PC display purpose S-Video Input Connect S-Video out from an S-V ideo device to the jacks. Antenna Input Connect cable or antenna signals to the TV , either direc- tly or thro[...]

Remote Control Key Functions(for TV/DVD Combi) When using the remote control, aim it towards the remote sensor on the TV Stand By DVD Open/close Picture Mode Scan DVD 10+ Mute Swap Call Screen Display Program Number NICAM Source Exchange Digital Selector DTV/DVD Volume/Channel Selection MENU Zoom DVD Audio DVD STOP Tune Menu Button DVD SETUP DVD PA[...]

Remote Control Key Functions(for TV only) When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By NICAM Picture Mode Switch to PC mode Return the last watched program channel Mute Automatically adjust in PC mode Call Screen Display Program Number Picture mode Source Exchange Digital Selector [...]

Remote Control Key Functions Installing Batteries 3 2 1 1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions Make sure that there is no obstacle between the remote con[...]

Connection Instructions Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker . Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Grounding External Equipment Connect[...]

Connection Instructions You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). VGA Input Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are of f; 3.Connect a D type 15-pin VGA interface[...]

Connection Instructions COMPONENT (If connected to S-VIDEO,select the S-VIDEO external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports T o get better picture quality, connect a DVD player to the component input ports as shown below. S-VIDEO Input Connection and use steps: 1.Read the user gui[...]

Connection Instructions SCART Input 1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Press SOURCE to select SCART mode. 3. Press Play button on external equipment and it should appear on the screen. HDMI HDMI HDMI Input HDMI Devices Connect the cable from the HDMI devices to the[...]

Basic Operating Instructions Turn on the LCD-TV When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red. Y[...]

Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1. if you want to choose any channel from 0 to 9, please press the -/-- button u[...]

Menu Operations Picture Menu Options 1. Press MENU button to display the main menu, and V+/V- to select the main menu . 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4. Press the EXIT button to exit the menu Picture quality can be adjusted for any input separately . The picture quality on the [...]

Menu Operations 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Functions: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it wi[...]

Menu Operations Audio Menu Options continued 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved . Functions : VOLUME : Adjust the volume of your [...]

Menu Operations Function Menu Options Menu Language Selection : The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU and V+/V- button until the following menu appears on the screen 2. Press P+/P- button to select LANGUAGE. 3. Press V+/V- button to select your desired language. From this point on, [...]

Menu Operations Function Menu Options Continued 4.DISPLAY MODE: T o select the display mode between 4:3, 16:9 and FULL SCREEN 5.BLUE SCREEN:T o set On, the screen will be in blue screen after 3 seconds if there is no signal. 6. RESET : Press V+ to reset the settings to the factory default . 7. CHILD LOCK: Press V+ to enter it and the following appe[...]

Menu Operations Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen ADJUST AUTO SYNC PHASE CLOCK H. POSITION V. POSITION Note: This menu only appears in PC mode . 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option 3.Press V+/V- button to increase and decrea[...]

Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen Note: This menu only appears in TV mode . 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your [...]

Menu Operations EXCHANGE : Press V+ to display the menu as follows: Press P+/- to select the item and then V+/- to adjust the channel and V+ to confirm.( F or example: press P+/- to select FROM item, and then press V+/- to adjust the channel number to 1; then Press P+/- to select TO item, and V+/- to adjust the channel number to 9; press P+/- to se[...]

/ DVB-T Main Menu Operations Channel List Press TEXT button to display the additional information. Press the DTV/DVD(DTV/TV) button on the remote control to enter the DVB status. 1. Press D.MENU button to display the main menu 2. Press to scroll through the options 3. Press OK button to confirm enter the submenu 4. Press the D.MENU or EXIT button t[...]

DVB-T Main Menu Operations Favourite List DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 1. Press D.MENU button , the main menu will appear. 2. Press button to select Favourites and OK button to confirm enter the sub-menu. 3. Then press to select among List 1, List 2, List 3, List 4 and List 5. 4. Press button to select the channel[...]

DVB-T Main Menu Operations Timers DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 1. Press D.MENU button , the main menu will appear. 2. Press button to select T imers and OK button to confirm enter the sub-menu. 3. Press button to select Mode/Name, and then press button to select the options. 4. Press button to select the other ite[...]

DVB-T Main Menu Operations Settings (continued) Then press button to select desired items and press OK to enter . At last press button to select the language. . / / DVB-T Menu Channel List Favourites Now/Next EPG Timers Settings 1. Press D.MENU button , the main menu will appear. 2. Press button to select Settings and OK button to confirm enter the[...]

DVB-T Main Menu Operations Settings (continued) 5. Press button to select First Time Installation and OK button to enter . Then press button t o select Yes or No and OK to confirm. / / . 3. Press button to select Installation and OK button to confirm enter the sub-menu. Press button to select Automatic Search. Press OK button to enter the sub-menu [...]

TELETEXT P+ P- V- V+ MENU T eletext T eletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.). T elete[...]

TELETEXT T eletext Cancel mode This feature allows the TV picture to be displayed while next page to be searched is entered and found. Only the top teletext line is displayed until the page is found. Press the button to hide the teletext information. Either press the button or the T ext button to exit the cancel display mode. Language change Pressi[...]

Basic Playback Preparations Press the DTV/DVD button on the remote control to enter the DVD status. 1. Place the DVD in the disc slot as figure above. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu. If there is no disc placed on the disc tray in DVD mode, OPEN will dis[...]

Advanced Playback PROGRAM When playing discs, press " PROGRAM " to enter program mode. Press the digit buttons to select the program number that you want. When finished, move the cursor to select "START" . This will start the program playback. If you want to cancel this function, press " STOP " , then press "PLAY/[...]

Special Function Playback JPEG DISC PLA YBACK Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file, then press the P[...]

SETUP DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b to select, the item, then press to enter the submenu. 3.Press CH+/- bu to select then press PLA Y/ENTER to confirm. 4.Press SETUP repeatedly to exit the set-up menus. or or General[...]

..General Setup Page.. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Tv Display 4:3 LB Angle Mark On OsdLang ENG Caption On Screen Saver Off Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off DVD System Setup(Continued) DVD Syst[...]

..Preference Page.. DVD System Setup(Continued) DVD System Setup The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. Preference Page TV Type: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems. Usually pleas[...]

DVD System Setup(Continued) DVD System Setup Default: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset. Note: Some functions may not be available depending on the type of disc. ..Preference Page.. Reset TV Type Parental Password Default A[...]

Playable Discs The following discs can be played: You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning. In a few cases, their performance may not be very well or even not playable. Support discs: D[...]

Compare DVD disc with other discs: DVD LD Encode method Digital/MPEG Analog Capacity 133 minutes 242 minutes 266 minutes 484 minutes Playing Time Single-side 60 minutes double-side 120 minutes 12cm Disc diameter 30cm/20cm Horizontal resolution More than 500 line No more than 430 line Multiple kinds Picture proportion One kind Subtitle 32 kinds 16 k[...]

T o assist in location possible faults use help guide below . Note: 1.If the fault can not be repaired using the above guide consult with your local authorized service center. 2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may caus[...]

Specifications Note: All specifications are subject to change without notice. All quality are approximate value. Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Accessories Picture, sound system Audio output External input port Power requirements Temperature 1.5[...]

Specifications Customer helpline:0845 604 0105[...]

V0.1 0090508942C[...]