Celluon CL800BT manual

[...]

CL800BT MANUAL 2 Safety Precautions  Avoid long time expose to the direct light or heat.  Faults may occur if kept in extreme of temperatures.  May become damaged if dropped or knocked.  Problems may occur if exposed to humid and/or dusty conditions.  Do not use if power cable or plug are damaged.  Use only dedicated cable/adapter[...]

CL800BT MANUAL 3 Regulatory Information FCC compliance Information This device complies with p art 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Information to U[...]

CL800BT MANUAL 4 - Redirect or reposition the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment to a socket on a circuit different from that to which the receiver is connected. - Consult the dealer or an ex per ienced radio/TV technician for help. FCC W ARNING: This equipment may generate or use [...]

CL800BT MANUAL 5 Laser Safety: Environmental Notice This product does not any materi als specified harmful to the human body . At the end of this product’ s service life, please separate with the life waste and discharge or go to the Celluon service center for env ironmental protection.[...]

CL800BT MANUAL 6 Battery Information Battery service life: 22 0 minutes contin uous use (max) Cap acit y: 830mAh (max) @ 3.7V Charging the Batter y Use the adapter supplied for con nection to the pow er supply . The battery will now start charging. Charging time: 150 min Caution - Use of any other adapter may cause the bat tery to explode. - After [...]

CL800BT MANUAL 7 T able Content s 1. FEA TURES ................................................................................... 9 2. COMPONENTS ..........................................................................10 3. P ARTS A ND THEIR FUNCTI ONS ............................................. 1 1 3.1 F RONT .................................[...]

CL800BT MANUAL 8 5.2 P ALM OS ............................................................................ 36 5.2.1 System Requirements .................................................36 5.2.2 Installation/Upgrading/Uninst alling............................... 36 5.2.4 PK Settings .................................................................. [...]

CL800BT MANUAL 9 1. Features Uses normal QWERTY keyboard layout. Compact size (convenient to carry). Includes function an d sh ortcut icon ke ys. Robust and durable, u ses optical technol ogies Bluetooth and serial port int erface connections. Rapid entry keys. Economical, uses an integra ted, rechargeable lithiu m battery . Compatible with Pocket [...]

CL800BT MANUAL 10 2. Components Serial cable is optional. (refer to http://www .celluon.de .) CDs: - CL800BT Manual - Palm Driver Installation File - Pocket PC 2003 D river (Widcomm Bluetooth S tack) Installation Fil e) - Pocket PC 2003 Dr iver (Microsoft Bluet ooth St ack) Installation Fil e) Laserkey Quick Install Guide Adapter Installation CD Ca[...]

CL800BT MANUAL 11 3. Parts and their Functions 3.1 Front Projector: projects the keyboard image. Infra Red Light Source : supplies the light source to allow the Sensor Modul e to recognize ke y strokes. Sensor Module: recognizes key strokes and tr ansmits them to the processin g device. Pattern Projector Sensor Module Infra Red Light Source[...]

CL800BT MANUAL 12 3.2 Rear POWER UP / DOWN Æ ON / OFF Switch Communication & Pow er Port s Serial Port RC232C Cable Power Port 1A @ 5V adaptor Only use the cable / adapter supplied. Power Switch Comm. & Power Ports[...]

CL800BT MANUAL 13 3.3 Top Battery Status LED o Charging Æ Red o Fully Charged Æ Green o Battery Power Low Æ Orange o (Power off w i thin 5 minutes.) Communication & Pow er St atus LED o Bluetooth Mode Pairing : Blue flashing Link: Blue o Serial Mode L E D G r e e n Communication & Power S tatus LED Battery S tatus[...]

CL800BT MANUAL 14 * What is Bluetooth? Standard wireless communication between wireless communication devices using low power and over short distances. Note: When you want to exit from using Pocket PC and CL800BT with Bluetooth communication setting, exit by using Pocket PC own keyboard. (Due to operating error , it may rese t Pocket PC). 4. How to[...]

CL800BT MANUAL 15 4.2 In Bluetooth Mode 1. Install sof tware as described in “Manual 5”. 2. T urn power on. 3. Set up Bluetooth environment as described in “Manual 5”. 4. Use laser keyboard. 5. How to install, remove and use software 5.1 Pocket PC 5.1.1 System Requirements 1. Microsoft Windows 2000/XP operating system. 2. Microsoft ActiveSy[...]

CL800BT MANUAL 16 1. Installation 1) Connect PC to Pocket PC via ActiveSync. 2) Insert installation CD into th e CD- ROM drive of y our PC to start the installation program. 3) Follow installation program instructions. 2. Upgrading Download and install a new driver from http://www . celluon.de . 3. Uninstalling 1) Select T oday Æ Setti ngs Æ Sys [...]

CL800BT MANUAL 17 Figure 1. Uninstalling the Driver 2) Choose Projection Keyboard and click Remo ve , as shown in Figure 2. Follow the on-screen instructions. Figure 2. Uninstalling the Driver[...]

CL800BT MANUAL 18 5.1.3 Connection Method T o connect a Pocket PC to the Projection Keyboard follow the instructions below . 1. T urn on power to Pocket PC and Projection Keyboard. Note: V erify that sufficient battery power is supplied to the Projection Keyboard device 2. Run the program required to enter the keyboard as shown i n Figure 3 (e.g. N[...]

CL800BT MANUAL 19 3. Select Projection Keyboard from the options, as shown in Figure 4. Figure 4. Selecting a Dev ice[...]

CL800BT MANUAL 20 4. When the Bluetooth Browser i s open, choose CL800BT , as shown in Figure 5. Figure 5. Selecting a Bluetooth Device[...]

CL800BT MANUAL 21 5. Y ou are now ready to use the Projection Keyboard. T o change the Projection Keyboard’s set values, click on the Projection Keyboard icon to view the control panel, as shown in Figure 6. Figure 6. Projection Keyboard Control Panel This icon[...]

CL800BT MANUAL 22 5.1.4 Disabling the Projection Keyboard Sound When the user clicks the ke yboard sound icon, a clicking sound is emitted from the Pocket PC. T o turn off the sound, click the keyboard sound button once; click again to turn it back on, as shown in Figure 7. Figure 7. Keyboard Sound Icon This icon[...]

CL800BT MANUAL 23 5.1.5 PK Settings Application Click on the settings icon to chan ge the different setting values on the Projection Keyboard, as shown in Figure 8. Figure 8. PK Settings Icon Click the settings icon to view the Change Settings screen, as shown in Figure 9. These setti ngs enable the user to adjust key repeat, key sound and key sens[...]

CL800BT MANUAL 24 5.1.5.1 Main Change Settings Tab Figure 9. Main Change Settings T ab Key Repeat By using Key Repeat, continuously pressing a key causes the value to be entered repeatedly . Select the Key Repeat checkbox to use the key repeat function or deselect to disable the function.[...]

CL800BT MANUAL 25 Keyboard Sound Clicking the Keyboard Sound func tion causes a clicking sound to be emitted from the Pocket PC. Select the Keyboard Sound checkbox to turn on the key sound function or deselect it to disable the function. Sensitivity If the Projection Keyboard has a problem with key sensitivity , adjust the setting using the slider [...]

CL800BT MANUAL 26 5.1. 5.2 Power Save Mode Adjust the Power Save Mode from the Power tab on the Change Settings screen. Power Save Mode On Click on the Power Save Mode On checkbox to use this function, as shown in Figure 10. Figure 10. Power Save Mode[...]

CL800BT MANUAL 27 Standb y Change the S tandby setting value to alter the time elapsed before the system enters St andby mode. In St andb y mode, if no keys are pressed within a given period of time the device will enter a low power mode until a key is pressed again. Figure 1 1. Stand b y Mode[...]

CL800BT MANUAL 28 W akeup Response T o use the keyboard again, press any key or area of the keyboard. Change the Wakeup Response settings to adjust the speed for switching between S tandby and normal mode, as shown in Figure 12. Figure 12. Wakeu p Response[...]

CL800BT MANUAL 29 T urning Off the Projection Ke yboard Once in S tandby mode, if no keys are pressed within the time specified in the T urn Off After fi eld, the device will enter Power OFF mode, as shown in Figure 13. T o use the keyboard from Power OFF mode, turn the Projection Ke yboard on again. Figure 13. Power OFF Mode Time Setting Restoring[...]

CL800BT MANUAL 30 5.1.5.3 Projection Control Adjust keyboard brightness using the settings in the Projection tab . P r o j e c t o r N o r m a l Adjust the keyboard brightness using the slider for the Projector Normal setting, as shown in Figure 14 Figure 14. Projector Norma l[...]

CL800BT MANUAL 31 Projector St and by Mode Change the settings in the Projector St andby box to set t he keyboard brightness in St andby mode, as shown in Figure 15. Figure 15. Projector Standby Restoring Defaults T o restore the settings in the Power tab to their default values, click the Restore Defaults button.[...]

CL800BT MANUAL 32 5.1. 5.4 Driver Inform ation Driver information for the Projection Keyboard is located under the About tab in the Settings screen, as shown in Figure 16. Figure 16. Driver Information[...]

CL800BT MANUAL 33 5.1.6 Tutorial Click the T utorial icon in the Projection Keyboard c ontrol panel to launch the Projection Keyboard Tutorial, as shown in Figure 17. The T utorial offers informat ion on how to use the Projection Keyboard. Figure 17. Projection Keyboard T uto r ial This icon[...]

CL800BT MANUAL 34 5.1.7 Shortcut Icon Keys T able 1.1 below shows the description for each icon. T able 1. 1 Shor tcut I c on Ke ys Icon Functions Switch to To d a y screen Run To D o program Run Mail program Run Find program Run W e b B r o w s e r Run C a l c u l a t o r program Run C a l e n d a r program Run Address program[...]

CL800BT MANUAL 35 5.1.8 Function Key and Ctrl Key T able 1.2 shows FN and CTRL key combinations. Key Shortcut Key Functions FN - 1 Run Note program FN - ENTER Close the current p ro gram FN - ← (Left Arrow) Home FN - → (Right Arrow) End FN - ↑ (Up arrow) Page Up FN FN - ↓ (Down Arrow) Page Down CTRL - Z Undo CTRL - X Cut CTRL - V Paste CTRL[...]

CL800BT MANUAL 36 5.2 Palm OS 5.2.1 System Re quirements 1. Microsoft Windows 2000/XP operating system. 2. HotSync software. 3. Palm OS 5 or later . 5.2.2 Installation/ Upgrading/Unin stalling For the serial port driver , please refer to http://www .celluon.de or http://www .plawa.com . Inst allation 1. Insert CD into the CD-ROM drive of the PC to [...]

CL800BT MANUAL 37 Uninstalling 1. Select Ap p Æ Delete, as sho wn in Figure 18. Figure 18. Uninstalling the Program[...]

CL800BT MANUAL 38 2. Select PK Settings and click Delete … , as shown in Fig ure 19. Delete the PK T utorial using the same method. . Figure 19. Deleting PK Settings[...]

CL800BT MANUAL 39 . 5.2.3 Establishing a Connection with the Projection Keyboard T o establish a connection between a Palm device and the Projection Keyboard, please follow the instructions below . 1. T urn on the Palm device and the Projection Keyboard. Note: Check that sufficient battery power is supplied to the Projection Keyboard device. 2 . Cl[...]

CL800BT MANUAL 40 3. On the Palm Bluetooth device screen, select Current Discovery in the Show items, as shown in Figure 21. Figure 21. Showing Bluetooth Devices[...]

CL800BT MANUAL 41 4. Select CL800BT , as shown in Figure 22. Figure 22. Selec ting CL800BT[...]

CL800BT MANUAL 42 5. Click the OK button. The system will display a Connecting screen, as shown in Figure 23. Figure 23. Connecting to Bluetooth[...]

CL800BT MANUAL 43 6. Once the Palm device and Projection Keyboard are connected, a tutorial screen is di splayed, as shown in Figure 24. Figure 24. T utorial[...]

CL800BT MANUAL 44 5.2.4 PK Settings Once the Palm device and Projection Ke yboard are connected, run the PK Settings program again to change the Projection Keyboard settings. 5.2. 4.1 Main Screen Select the Main screen to view Settings, as shown in Figure 25. Y ou ma y set the following functions: Figure 25. Main Screen[...]

CL800BT MANUAL 45 Key Repeat By using Key Repeat, continuou sly pressing a key causes the value to be entered repeatedly . Select the Ke y Repeat checkbox to use the key repeat function or desel ect to disable the function. Keyboard Sound Clicking the Keyboard Sound fu nction causes a clicking sound to be emitted from the Pocket PC. Select the Keyb[...]

CL800BT MANUAL 46 Disconnecting T o disconnect the Palm device fr om the Projection Ke yboard, click on the Exit button. 5.2.4.2 Power Save Screen In the Power Save menu, you can change settin gs related to power consumption, as shown in Figure 26. Figure 26. Power Save Mode[...]

CL800BT MANUAL 47 Power Save Mode Select the Power Save Mode Off checkbox to disable Power Save Mode, or deselect the checkbox to run Power Save Mode. St andb y Mode Change the S tandby setting value to alter the time elapsed before the system enters St andby mode. In St andb y mode, if no keys are pressed within a given period of time the device w[...]

CL800BT MANUAL 48 Restoring Defaults T o restore the settings in the Power tab to their default values, click the Restore Defaults button. 5.2. 4.3 Proje ctor S creen Adjust the brightness of the keyboard on the Proj ector menu, as shown in Figure 27. Figure 27. Projector Screen[...]

CL800BT MANUAL 49 Power Save Mode Shows whether the Power Save option is turned on or off. Keyboard Brightness Change the Projector Normal slider to adjust the keyboard brightness. Keyboard Brightness in Standby Mode Change the Projector St andby slider to adjust the ke yboard brightness when in S tandby mode. Restoring Defaults T o restore the set[...]

CL800BT MANUAL 50 5.2.5 PK T utorial Click the PK T utorial icon to launch the tutorial. Y ou can view information on how to use the Pr ojection Keyboard within the tutorial, as shown in Figure 28.[...]

CL800BT MANUAL 51 Figure 28. PK T utori al[...]

CL800BT MANUAL 52 5.2.6 Shortcut Icon Keys T able 2.1 shows the description for each icon. T able 2. 1 Icon Ke ys Icon Functions Switch to To d a y screen Run To D o program Run Mail program Run Find program Run Web Br ow ser Run Calculator program Run Calendar program Run Address program[...]

CL800BT MANUAL 53 5.2.7 Shortcut K eys T able 2.2.lists the FN and CTRL key combinations. Key Key Combination Functions FN - 1 Run Memo Pad Program FN - 2 Run Vo i c e M e m o Program FN - F Select Font FN - K Launch PK Settings application FN - R Cmd + R FN - Y Cmd + Y FN - I Cmd + I FN - D Cmd + D FN - B Cmd + B FN - N Cmd + N FN - ← (left Arro[...]

CL800BT MANUAL 54 FN - ↓ (Down Arro w) Page Down CTRL - Z Undo CTRL - X Cut CTRL - V Paste CTRL - C Copy CTRL - A Select A ll CTRL - U Undo CTRL - S Select A ll CTRL - F Fi nd CTRL CTRL - P Paste T able 2.2 Key Combinations[...]

CL800BT MANUAL 55 6. Keyboard Layout Key layout of Projection Keyboard is as follows.[...]

CL800BT MANUAL 56 7. T yping Latin Letters and Additional Characters FIRST SECOND Remark A E I O UYNBC / P S T D + R Á É Í Ó Ú Ý FN - ' SHIFT á é í ó ú ý Â Ê Î Ô Û FN - SHIFT - 6 SHIFT â ê î ô û Ä Ë Ï Ö Ü Ÿ FN - SHIFT - ; SHIFT ä ë ï ö ü ÿ À È Ì Ò Ù FN - ` SHIFT à è ì ò ù Ã Õ Ñ FN - SHIFT - ` SHIF[...]

CL800BT MANUAL 57 Key input e.g. 1) to input "Á" character: Press FN key and ' key simultaneously . Release both keys. Press SHIFT and A simu ltaneously . Key input e.g. 2) to input " ñ " character: Press the FN key , SHIFT key and ` key simultaneously . Release keys. Press N. Key input e.g. 3) to input "€" ch[...]

CL800BT MANUAL 58 8. Adjusting Key Sensitivity The Projection Keyboard deter mines key input based on the amount of light reflected from the finger . Since the perceived amount of light changes depending on the surrounding environment, key sensitivity should be set according to user- specific conditions. How to A djust Ke y Sensitivit y 1. Click Se[...]

CL800BT MANUAL 59 Caution - Key sensitivity must be adjus ted each time a new user accesses the keyboard according to the new user’s requirements. - To ensure correct operation, avoid extreme light sources. - Relevant environmental factors include: - Direct sunlight, artificial li ght, Infra Red Data Association (IrDA), remote control devices .[...]

CL800BT MANUAL 60 9. Safety Precautions Never look directl y at the l ight source. A void direct sunlig ht or high levels of infrare d rays. Do not use in extreme brightness. Do not us e under very bri ght incandesc ent light. Do not insert conducti ve material into the de vice, or damage the pow er or communication p ort s. Do not strike or knoc k[...]

CL800BT MANUAL 61 caused by water. (Determined by color on the att ached sticke r .)[...]

CL800BT MANUAL 62 10. Troubleshooting The device w ill not tur n on. Cause: Discharged battery . Solution: Charge the battery fully . Key strokes not recognized even though the ke yboard is connected. Cause: Sensitivity set too low. Solution: Reset to higher sensitivity and restart the device. Keyboard image is not visible even though the ke yboard[...]

CL800BT MANUAL 63 Solution: Move to a flat surface. Incorrect keys are recognized w hen typing. Cause: Sensitivity is set too high. Solution: Reset to lower sensitivity and restart the device. Cause: The device was not positioned on a flat surface. Solution: Move to a flat surface.[...]

CL800BT MANUAL 64 11. Specifications and Dimensions Keyboard Project Items Specifications Light source Red Laser diode Keyboard layout 17mm QWERTY layout Keyboard size Approx. 241mm*106mm Keyboard position Approx. 100mm from keyboard dev ice Projection surface Non-refle ctive, opaque flat surface Visibility Visible in 1000 -5000 lux ambient light K[...]

CL800BT MANUAL 65 Electrical Condition Items Specifications Power source Integral lithium ba ttery Battery capaci ty 830mAH(Max )@3.7V Adapter Rating 1A @ 5V Interface RS232C serial Bluetooth v1.1 class 2 Power consumption Max. 3 W @5V Environmental Co ndition Items Specifications Operating temperature Approx. 0~35°C S torage temperature Approx. -[...]

CL800BT MANUAL 66 Comp atibl e Operati ng System s Microsoft Windows Mobile 2003 Palm OS 5.x Microsoft Windows XP Size (mm): 93 * 39 * 37.5 Weight: 109g For info rmation on device and driv er compat ibility , please refer to http://ww w.celluon.de or http://www.plawa.com . T echnical Support: plawa-feinwerktechnik GmbH & Co. KG Bleichereistr . [...]