Go-Video VR2945 manual

DVD Recor der + VCR VR2945 User Manual  DF-L72B1N-BS(GB) 04.7.1 3:9 AM 페이지A[...]

INTRODUCTION 1 Impor tant Safeguards Impor tant Safeguards CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsul[...]

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protec[...]

INTRODUCTION 3 5 Do not use this product near water. For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6 Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7 Do not block any ventilation ope[...]

4 T able of Contents T able of Contents Important Safeguards _________________________1 Table of Contents ______________________________4 Overview ______________________________________5 Identification of Controls_______________________10 INTRODUCTION Connecting Antenna/Cable ____________________15 Connecting a TV _______________________________16 [...]

INTRODUCTION 5 Over view Over view DVD, DVD+R, DVD+RW? What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc. How go[...]

6 Overview Disc-related T er ms Title (DVD only) The main film, accompanying feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assign[...]

INTRODUCTION 7 Overview Notes on Recording • The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recor[...]

8 Overview Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit aw[...]

INTRODUCTION 9 Overview Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exp[...]

10 Identification of Contr ols Identification of Contr ols ! POWER Turns the DVD Recorder+VCR on and off. Lock/Unlock the front panel and Remote control by pressing and holding it over 5 seconds. @ Cassette Compartment (VCR deck) Insert a video cassette here. # EJECT (VCR) Ejects the tape in the VCR deck. $ Disc Tray (DVD deck) Insert a disc here. [...]

INTRODUCTION 11 Identification of Controls Front Panel Display ! Indicates a VHS tape is inserted in the VCR deck. @ Circle : Indicates the VCR is recording. Clock : Indicates a VCR Timer Recording is set. # Indicates that a stereo broadcast is being received. $ Indicates when a Second Audio Program (SAP) broadcast is being received. % Indicates wh[...]

12 Identification of Controls Remote Control Turns the DVD Recorder+VCR on and off. - Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode. Switches the view on your TV to the DVD Recorder+VCR tuner. Selects DVD mode. Selects VCR mode. Switches between the DVD Recorder+VCR tuner and your TV tuner. Displays or ex[...]

INTRODUCTION 13 Switches the DVD Recorder+VCR input to Tuner, LINE1, LINE2, or DV. Displays a disc’s Title menu, if available. Identification of Controls Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs). - VCR : SP or SLP. Displays the Timer Recording menu. Selects an audio language (DVD), audio channel (CD) or audio t[...]

! AC Power Cord Plug into a power outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. # COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr) inputs. $ AV OUT (VIDEO, L-AUDIO-R) Connect to a TV with video and audio inputs. % LINE2 (VIDEO, L-AUDIO-R) Connect to the audio/video outputs o[...]

INTRODUCTION 15 Connections Connections Connecting Antenna/Cable CONNECTIONS 1 Disconnect the antenna/cable from the rear of your TV. 2 Connect this cable to the jack marked RF IN (FROM ANT.) on the rear panel of the DVD Recorder+VCR. Cable Ser vice Without Cable Box If your cable wire is connected to your TV without a converter or descrambler box,[...]

Choose one of the following TV connections, depending on the capabilities of your equipment. RF Coaxial Connection Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied coaxial cable (R). If you use this connection, tune your TV to the DVD Recorder+VCR’s RF output channel (CH 3 or 4). How to [...]

CONNECTIONS 17 Progressive Scan Connection • If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD Recorder+VCR’s Progressive Scan output for the highest video resolution possible. • If your TV does not accept the Progressive Scan format, the picture will appear scrambled. 1 Connect the C[...]

18 Connections Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A). Connecting to an amplifier equipped with two cha[...]

CONNECTIONS 19 Connections To receive audio/video signals from other equipment, connect the LINE1 or LINE2 jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables. Connecting Optional Equipment  OUT  LINE 2  AUDIO  VIDEO L  R  RF OUT  ANT. IN Using the front panel[...]

After successfully connecting your DVD Recorder+VCR to your TV and other devices, this chapter will show you how to complete the initial installation. 1 A ‘Welcome‘ message is displayed on the screen. Make sure the RF cable from your antenna or cable TV jack is connected. 2 Select the desired language for the on-screen menu using [ … / † ].[...]

SETUP 21 5 Select the desired disc playback subtitle language using [ … / † ]. Press [ENTER] to confirm. 6 Select the desired signal type using [ … / † ]. Press [ENTER] to confirm. 7 The DVD Recorder+VCR detects channels automatically and stores them in memory. 8 After finishing Auto Channel Search, set the clock. 9 Use [ œ / √ ] to move[...]

The DVD Recorder+VCR Setup menu includes six categories, including: Installation, Recording Options, Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [ œ / √ ] on the remote control to view the first and second levels of the Setup menu. Setup Menu Over view 22 1 Press [SETUP]. The Setup menu appears. 2 Use [ œ / √ [...]

SETUP 23 Initial Setup Auto Channel Search The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Preparation: Connect the DVD Recorder+VCR to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable?[...]

Set Clock 1 Follow steps 1-2 as shown under Tuning Band. 2 Use [ … / † ] to select ‘Set Clock‘. 3 Press [ENTER]. The Set Clock menu appears. 4 Enter the date and time. œ / √ (left/right): Moves the cursor to the previous or next column. … / † (up/down): Changes the setting at the current cursor position. 5 Press [ENTER] to confirm yo[...]

SETUP 25 Initial Setup VCR Record Quality You can set the default VCR recording quality to SP (Standard Play) or SLP (Super Long Play). SP is higher quality, but SLP provides 3 times the recording time; e.g., a 2 hour tape will record for 6 hours in SLP mode. Follow the same procedure as the DVD Record Quality. Auto Chapter During recording, chapte[...]

26 Initial Setup OSD Language Select a language for the DVD Recorder+VCR Setup menu and on-screen displays. 1 Press [SETUP]. The Setup menu appears. 2 Use [ œ ] and [ √ ] to select ‘Language‘. 3 While ‘Language‘ is selected, press [ † ] to select ‘OSD Language‘. 4 Press [ENTER] to move to the second level. 5 Use [ … / † ] to se[...]

SETUP 27 Initial Setup 1 Press [SETUP]. 2 Use [ œ / √ ] to select ‘Preference‘. 3 While ‘Preference‘ is selected, press [ † ] to select ‘Video‘. 3 Press [ENTER]. The ‘Video‘ submenu is displayed. TV Aspect Ratio 1 Use [ … / † ] to select ‘TV Aspect‘ while the ‘Video‘ submenu is displayed. 2 Press [ENTER] or [ √ ] [...]

Follow the same procedure as Video Settings to select Audio Settings. Digital Output 1 Use [ … / † ] to select ‘Digital Output‘ while the Audio submenu is displayed. 2 Press [ENTER] or [ √ ] to go to the second level. 3 Use [ … / † ] to select the desired digital output type. 4 Press [ENTER] to confirm your selection. 5 Press [SETUP] [...]

SETUP 29 Initial Setup Vir tual Surround You can enjoy a simulated 3D effect from two speakers by setting Virtual Surround to On. Follow the same procedure as ‘Digital Output‘ to set the Virtual Surround option. VCR Reception Select your desired audio source for VCR recording (Stereo, Mono, or SAP). Follow the same procedure as ‘Digital Outpu[...]

Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from 1 to 8. 1 Press [SETUP]. 2 Use [ œ / √ ] to select ‘Preference‘. 3 While ‘Preference‘ is selected, press [ † ] to select ‘Par[...]

8 Press [ENTER] to confirm your rating selection, then press [SETUP] to exit the menu. SETUP 31 Parental Control Set Parental Level Level3 Change Password Instructions Enter-Confirm Setup-Exit Move …† Change Password 1 While ‘Preference‘ is selected, press [ † ] to select ‘Parental Controls‘. 2 Press [ENTER]. The ‘Parental Controls?[...]

32 AutoPlay AutoPlay enables the DVD Recorder+VCR to skip the opening ads and previews at the beginning of a DVD and play the DVD automatically when it is inserted in the tray. 1 Use [ … / † ] to select ‘AutoPlay‘. 2 Press [ENTER] or [ √ ] to go to the second level. 3 Use [ … / † ] to set the AutoPlay Status. 4 Press [ENTER] to confir[...]

SETUP 33 Initial Setup VCR This feature enables you to search for Index marks or specific times on your VHS tapes. 1 While ‘Preference‘ is selected, press [ † ] to move to the second level. 2 Use [ … / † ] to select ‘VCR‘. 3 Press [ENTER] to display the submenu. 4 Select ‘Index Search’ or ‘Go-To Search’. 5 If you select ‘Ind[...]

• Some options cannot be reset, including Parental Controls, Password, and Country Code. • After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the country, language, channel, and clock settings again. If you wish, you can reset the DVD Recorder+VCR to its original factory settings. 1 Press [SE[...]

SETUP 35 On-Screen Display Over view On-Screen Display Over view The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button. To display information about the currently loaded disc or tape: On-screen display operation 1 P[...]

Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below. • STEREO+SAP Audio Signal Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo • STEREO Audio Signal Stereo[...]

SETUP 37 On-Screen Display Overview Chapter Shows the current chapter number and total number of chapters, and skips to the desired chapter number. 1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. 2 Use [ …† ] to select the ‘Chapter‘ icon on the on-screen display. Press [ENTER] to display a submenu. 3 Use [[...]

38 DVD Playback DVD Playback 1 Press the [DVD] button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. 2 Press [EJECT] to open the disc tray. 3 Load your disc in [...]

39 DVD Playback Zoom The Zoom function allows you to magnify the video image and scroll around the enlarged image. 1 Press [ZOOM] during Play mode to activate the Zoom function. Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ➝ X2 ➝ X4 ➝ X1 (normal size) 2 Use the [ œ √…† ] buttons to scroll around t[...]

40 DVD Playback Search 1 Press [SEARCH] to display the Search menu. 2 Use [ œ √ ] to move to Title (T) or Chapter (C) and use [ …† ] to set the title or chapter number. Selecting Titles When a disc has more than one title, you can select among all available titles as follows: 1 Press [DISPLAY] and use [ …† ] to select the Title icon. Pre[...]

PLAYBACK 41 Press the VCR button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Before Y ou Begin 1 Insert a prerecorded video cassette. If the DVD Recorder+VCR[...]

Notes on special playback features Horizontal lines (noise bars) will appear on the TV screen. This is normal. The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight inter[...]

PLAYBACK 43 Other Disc Playback Other Disc Playback The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. 1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menu appears on the TV screen after a few moments to load the disc. 2 Use [ …† ] to select a track or a file, then press [PLAY] or [ENTER]. Duri[...]

44 Other Disc Playback 3 Select the thumbnail you want to display using [ …†œ √ ] and press [ENTER]. 4 The full size image will be displayed and a slide show starts automatically with a time interval of 10 seconds. 5 Press [NEXT] or [PREV] to manually skip to the next or previous image. 6 Press [ √ ] (or [ œ ]) to rotate the image (counte[...]

PLAYBACK RECORDING 45 Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Av[...]

Total time and recorded time are displayed on the TV screen after pressing [DISPLAY] twice. Recorded time is displayed on the front panel display. Checking the Recording Time 46 1 Press [PLAY/PAUSE] to pause the disc or tape during recording. 2 When you want to continue recording, press [PLAY/PAUSE] or [REC ( ● )]. T o Pause the Recording Basic R[...]

You can copy the contents of a DVD to a VHS tape using the [DVD ➝ VCR] button. 1 Insert a Disc. Insert the disc you wish to copy in the DVD deck and close the disc tray. 2 Insert a VHS Tape. Insert a blank VHS videotape into the VCR deck. 3 Select DVD mode by pressing [DVD] on the remote control or pressing [DVD/VCR] on the front panel. 4 Find th[...]

48 Basic Recording You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [VCR ➝ DVD] button. This allows you to archive your old VHS tapes to DVD. 1 Insert a VHS Tape. Insert the VHS videotape you wish to copy into the VCR deck. 2 Insert a DVD+R or DVD+RW disc. Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the dis[...]

RECORDING 49 The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape. 2 Press [TIMER]. The ‘Timer Recording’ menu appears. Use [ …† ] to move to a timer recording slot, and press [ENTER] to modify it. If you did not set the clock on[...]

50 Timer Recording Even if a Timer Recording is set, the DVD Recorder+VCR will not record if: • No disc is loaded. • A non-recordable disc is loaded. • DISC Lock is set to ON in the DISC Settings menu; see page 53. • There are already 49 titles recorded on the disc. You cannot enter a Timer Recording if: • A recording is already under way[...]

RECORDING 51 You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 15 and 19. 2 Use [ …† ] to select the external input to record from. • Tuner: Built-in tune[...]

52 Recording from an External Input Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using a single DV cable for input and output of audio, video, data and control signals. The i.LINK interface is also known as IEEE 1394-1995. “i.LINK” and the “i.LINK” logo are trademarks. • The DVD Recorder+[...]

RECORDING EDITING 53 For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu. The DVD+R Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other DVD players. The DVD+RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with [...]

54 Editing Lock/Unlock Disc (DVD+R W) If you want to protect a disc from accidental recording, editing, or erasing, you can lock the disc. Later, if you change your mind, you can unlock the disc. 1 Use [ … ] to go to the top menu. 2 Press [ √ ] to display the Disc Information Menu. 3 Use [ œ / √ ] to select ‘Lock/Unlock Disc’. 4 Press [E[...]

EDITING 55 Editing • Once you have finalized a DVD+R disc, you cannot edit or record anything else on that disc. • ‘Finalize (Make Compatible)’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the number of titles on the disc. • If you do not make your DVD+RW disc compatible, your edits will [...]

56 Editing Change Disc Name You can rename your disc to any name you choose. The default disc name is ‘MY DVD‘. 1 Use [ … ] to go tothe top menu. 2 Press [ √ ] to display the Disc Information Menu. 3 Press [ √ ] and select ‘Change Disc Name‘. 4 Press [ENTER] as shown on the screen. 5 The Keyboard Menu appears. 6 Use [ œ √…† ] t[...]

EDITING 57 You can manage the titles on your DVD+R/RW discs using the Title menu. Play a Title To play a title: 1 Press [MENU] to display the disc menu. 2 Select the desired title you want to manage using [ …† ]. 3 Press [ √ ] to display the title menu. 4 Select ‘Play Title' using [ œ √ ] . 5 Press [ENTER] to play the title. Erase a[...]

58 Change Name To change the name of a title: 1 Follow steps 1 to 3 under ‘Play Title‘. 2 Select ‘Change Name’ using [ œ √ ] . 3 Press [ENTER] to change the title name. 4 The Keyboard Menu will be displayed. Use [ œ √…† ] to select a character or function and press [ENTER]. CLR : Clear the whole title. SP : Add a space DEL : Delet[...]

EDITING 59 When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, you can edit the titles and chapters in a variety of ways. To edit a recorded title, select the title on the disc menu and press [EDIT]. The selected title will begin playing automatically. Titles and Chapters When you insert a DVD+R or DVD+RW disc already [...]

60 Hide Chapters This feature allows you to hide or unhide a chapter. After hiding a chapter, the chapter is not deleted but only hidden. If a chapter is hidden then it shows ‘Unhide Chapter‘ and vice versa. Change Index Picture Each title displayed in the Playlist menu is represented by a thumbnail picture taken from the start of that title or[...]

EDITING REFERENCE 61 Check the following guide for the possible cause of a problem before contacting customer support. No power. No picture. No sound. Playback picture is poor. DVD Recorder+VCR does not start playback. Picture from external input is distorted. Some channels are skipped over when using [CH …† ]. Picture or sound of broadcasting [...]

62 Troubleshooting Camcorder image via A/V input to DVD Recorder+VCR is not shown on TV screen. Can’t play disc recorded on this DVD Recorder+VCR on another DVD player. Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. DVD Recorder+VC[...]

REFERENCE 63 When the DVD Recorder+VCR is moved from a cold place to a warm place. Under extremely humid conditions. Keep the DVD Recorder+VCR plugged into an AC power outlet with the power on. This will help prevent condensation. When condensation has occurred, wait a few hours for the DVD Recorder+VCR to dry before using it. Moisture Condensation[...]

64 General Power requirements AC 120V, 60 Hz Power consumption 34W Dimensions (approx.) 16.9 x 3.54 x 14.0 inches (430 x 91 x 354 mm) (w x h x d) Mass (approx.) 13.5 lbs (6.18 kg) Operating temperature 41°F to 95°F (5°C to 35°C) Operating humidity 5% to 90% Signal system NTSC Recor ding Recording formats DVD Video Recording, DVD-VIDEO Recordabl[...]

REFERENCE 65 Video cable ............................................. 1 Audio cable ............................................. 1 RF Coaxial Cable ..................................... 1 Blank DVD+RW disc ............................... 1 Remote control ....................................... 1 Batteries .........................................[...]

P/N : 97P95600N0-D1 DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지66[...]