Metrologic Instruments MS2220 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Metrologic Instruments MS2220. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Metrologic Instruments MS2220 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Metrologic Instruments MS2220 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Metrologic Instruments MS2220, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Metrologic Instruments MS2220 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Metrologic Instruments MS2220
- nombre de fabricante y año de fabricación del dispositivo Metrologic Instruments MS2220
- condiciones de uso, configuración y mantenimiento del dispositivo Metrologic Instruments MS2220
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Metrologic Instruments MS2220 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Metrologic Instruments MS2220 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Metrologic Instruments en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Metrologic Instruments MS2220, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Metrologic Instruments MS2220, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Metrologic Instruments MS2220. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    METROLOGIC INSTRUMENTS, INC. MS2220 Stratos S ™ Scanner / Diva Scale Installation and User’s Guide[...]

  • Página 2

    Copyright © 2006 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief pas sages in a review, or provided for in the Copyright Act of 1976. Trademarks Metrologic is a registered trademark [...]

  • Página 3

    ii T ABLE OF C ONTENTS I NTRODUCTION Manual Scope ................................................................................................................... ....................................................... 1 Product Ov erview ............................................................................................................[...]

  • Página 4

    iii T ABLE OF C ONTENTS S CANNER O PERATION Scan Z one .............................................................................................................................................................................. 28 IR Activation Area (IR LED Ou tput) .................................................................................[...]

  • Página 5

    iv T ABLE OF C ONTENTS S CANNER AND C ABLE T ERMINATIONS Scanner Pinout Connec tions .................................................................................................................................................. 66 Cable Connector Configur ations ...................................................................................[...]

  • Página 6

    v[...]

  • Página 7

    1 I NTRODUCTION M ANUAL S COPE This guide provides information on th e installation , setup and operation of Metrologic’s St ratos S, MS2220 scanner/Diva scale unit. It is designed to be used in conjunction with Metrol ogic’s MetroSelect Configuration Guide ( MLPN 00-02407 x ) and the MS2 x 20 Stratos Series Scanner/Diva Scale Configuration Add[...]

  • Página 8

    2 I NTRODUCTION B ASE K IT C OMPONENTS B ASE K IT C OM PONENTS Part # Description M S 2220-105K z Stratos S ™ Scanner/Diva Scale D Diamonex Horizontal W indow z S Sapp hire Horizontal Window 00-02407 x MetroSelect ® Confi guration Guide 00-02272 x MS2 x 20 Stratos Series Scan ner/Diva Scale Configuration Addendum 00-02274 x MS2220 Stratos S ™ [...]

  • Página 9

    3 I NTRODUCTION O PTIONAL A CCESSORIES AC to DC Power Transformer - Regulated Output: +5.2V @ 2A +12V @ 1A Part # Description 46-00226 120V United States and Canada 46-00227 220V – 240V Continental Europea n 46-00228 220V – 240V United Kingdom 46-00229 220V – 240V China 46-00230 220V – 240V Australia Optional Remote Scale Display 46-00375 R[...]

  • Página 10

    4 I NTRODUCTION R EPLACEMENT P ARTS R EPLACEMENT P ARTS Part # Description Caution Window types (Diamonex a nd Sapphire) are not interchan geable due to laser safety and/ or scanner performance differences. To change window type, the scann er must be returned to the manufacturer for reconfiguration. 46-00232 Stratos S ™ Vertical Scan Windo w 46-0[...]

  • Página 11

    5 I NTRODUCTION G ENERAL P RECAUTIONS The following are some gener al precautions to remember when handli ng your MS2200 Series scanner. D O N OT T URN the unit upside do wn with the platter in place. D O N OT P RESS on the window in the replac ement platter or the vertical window frame. P LATTER R EMO VAL No hardware or tools are requ ired to remo[...]

  • Página 12

    6 I NTRODUCTION MS2200 S ERIES D ESIGN S PECIFICATIONS Design Specifications Operational Light Source: VLD 650 nm Peak Laser Power: <1.5 mW Maximum IR LED Outp ut: 50 μ W per IEC 60825-1 measurement procedu re Horizontal Depth of Field: 0 mm - 152 mm (0”- 6”) for 0.33 m m (13 mil) Bar Code Vertical Depth of Field: 0 mm - 216 mm (0”- 8.5?[...]

  • Página 13

    7 B ASE M ODEL C HARACTERISTICS MS2220 Scanner/Mettler Toledo DIVA Scale Components Figure 7. MS2220 Components[...]

  • Página 14

    8 B ASE M ODEL C HARACTERISTICS MS2220 Scanner/Mettler Toledo DIVA Scale Components I TEM N O . D ESCRIPTION OF I TEM IN F I GURE 7 1 Scale Zero Button (see page 39) 2 Amber LED, Scale Zero Indicator (see page 39) 3 Volume/Tone Multi-Function Button (see page 37) 4 Blue and White LED Indicators (see page 31) 5 Speaker 6 Finger Recesses for Lifting [...]

  • Página 15

    9 B ASE M ODEL C HARACTERISTICS MS2220 Scanner/Diva Scale Dimensions Figure 8 . MS2220 Dimensions Specifications are subjec t to change without notice. Connector Panel Figure 9. MS2220 Connector Panel[...]

  • Página 16

    10 B ASE M ODEL C HARACTERISTICS MS2220 Scanner/Diva Scale Caution and Serial Number Labels Figure 10. MS2220 Label Locations (Top) and Exa mples (Bottom) Caution: To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV (S afety E xtra L ow V oltage) according to EN/IEC 60950-1. To[...]

  • Página 17

    11 I NSTALLATION Q UICK I NSTALLATION O UT LINE The following is a quick previ ew of the steps required for 1 st time installations. Each item is discussed in detail later in th is section. • Determine clearance, ventilation and service access requirements. • Determine checkout counter layout takin g into account package flow, cable routing and[...]

  • Página 18

    12 I NSTALLATION S ITE R EQUIREMENTS Power Installation The Power Supply (AC/DC) should b e connected to an AC Outlet that is free of electrical noise (clean). A qual ified electrician can determine the amount of elec tric al noise on the AC line. See addition al information on power installatio n and restrictions under the Installation: Interf ace[...]

  • Página 19

    13 I NSTALLATION U NPACKING THE U NIT 1. Make sure the shipping box is top-side up before opening. 2. Remove the accessories box and check the box’s content for the following items. • Product Manuals • Power Supply • Communication Cables • Remote Scale Display (Optional) 3. Carefully remove the platter and store it in a safe location unti[...]

  • Página 20

    14 I NSTALLATION U NPACKING THE U NIT MS2220 Package Warning There is a protective film loca ted on the topside p latter surfac e, vertical scan windows outer surface, and the horiz ontal scan windows top surface. These protective films must be removed prior to per forming any scanner operation (see Figur e 15 ). Both foam wedges securing the scale[...]

  • Página 21

    15 I NSTALLATION I NSTALLING THE U NIT IN THE C OUNTER MS2220 Mounting Diagram Figure 17. MS2220 Mounting Diagram Specifications are subjec t to change without notice.[...]

  • Página 22

    16 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) RS232 The following steps describe ho w to properly install the cables for an RS232 Stratos S application. T he scanner/Diva scale must then be configured to match the host’s RS23 2 parameters. Cable ins tallation alone does not guarantee that the Stratos S will communicate properl y[...]

  • Página 23

    17 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) RS232 9. Turn on the host system. 10. Scan the recall Recall Defaults bar code. The Recall Defaults bar co de is located in the MetroSelect Configuration Guid e, under Need to Start Over on page xi ( MLPN 00-02407 x). 11. Configure the Stratos S to match the host system’s RS232 param[...]

  • Página 24

    18 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) F ULL S PEED USB The following steps describe ho w to properly install the cables for a Full Speed USB Stratos S applicatio n. The scanner/Diva scale must then be configure d to match the host’s U SB parameters. Cable installation alone does not guarantee that the Stratos S will comm[...]

  • Página 25

    19 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) F ULL S PEED USB 9. Turn on the host system. 10. Configure the Stratos S to match the host system’s USB parameters. For Single Cable A pplications: The IBM OEM Full Speed USB English and Metric bar codes are located in the MS2 x 20 Stratos Series Scanner/Diva Scale Conf igur ation Ad[...]

  • Página 26

    20 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) F ULL S PEED USB xx** Specifies international connection. See the Base Kit Co mponents and Optional Accessories section of this guide for a complete listing. See power source caution statement on page 10 of this manual. Figure 19. USB Cable Installation Schematic[...]

  • Página 27

    21 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) IBM 46 XX The following steps describe ho w to properly install the cables for an IBM 46xx Stratos S application. T he scanner/Diva scale must then be configured to match the host’s IBM 46xx parameters. Cable installation alo ne does not guarantee that the Stratos S will communicate [...]

  • Página 28

    22 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) IBM 46 XX 9. Turn on the host system. 10. Configure the Stratos S to match the host system’s IBM 46xx parameters. For Single Cable A pplications: The IBM 3 rd Generation 46xx, English and Metric bar codes are located in the MS2 x 20 Stratos Series Scanner/Diva Scale Conf igur ation A[...]

  • Página 29

    23 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) OCIA The following steps describe ho w to properly install the cables for an OCIA Stratos S application. The scanner/D iva scale must then be configured to match the host’s OCIA parameters. Cable installation alone does not guarantee that the Stratos S will communicate properl y with[...]

  • Página 30

    24 I NSTALLATION C ABLE I NSTALLATION (I NT ERFA CE S PECIFIC ) OCIA 8. Connect AC power to the transformer. If the AC out let is equipped with an on/off s witch, turn the power on. 9. Turn on the host system. 10. Configure the Stratos S to match the host system’s OCIA parameters. Refer to the MetroSelect Configuration Guid e ( MLPN 00-02407 x ) [...]

  • Página 31

    25 I NSTALLATION C ABLE I NSTALLATION (S ECONDARY M ETROLOGIC S CANNER ) The following steps describe ho w to properly install the cables bet ween a secondary Metrologic scanner and the Stratos S . The Stratos S and the secondary scanner must then be configur ed to communicate properly. Cable installation alon e does not guarantee that the Stratos [...]

  • Página 32

    26 I NSTALLATION C ABLE I NSTALLATION (S ECONDARY M ETROLOGIC S CANNER ) † See Aux power notes on page 25 See power source caution statement on page 10 of this manual. Figure 22. Secondary Scanner Cable Installation Schematic[...]

  • Página 33

    27 I NSTALLATION EAS D EACTIVATION SW1 and SW2 are the switch banks insid e the Checkpoint Device th at set the deactivation range. The follo wing is a list of Checkpoint recommended s witch bank settings. Base Model Checkpoint Recommended S w itch Bank Settings MS2220 SW1 & SW2 switches 1 a nd 6 set to ON All Stratos S models have a connector [...]

  • Página 34

    28 S CANNER O PERATION S CAN Z ONE Figure 25. Checker-Side (13 mil) Figure 26. Horizontal Left/Right (13 mil) Specifications are subjec t to change without notice.[...]

  • Página 35

    29 S CANNER O PERATION S CAN Z ONE Figure 27. Horizontal Direct (13 mil) Figure 28. Vertical Direct (13 mil) Specifications are subjec t to change without notice.[...]

  • Página 36

    30 S CANNER O PERATION IR A CTIVATION A REA (IR LED O UTPUT ) The Stratos S ’s default po wer save mode † is Dual Action Power Save Mode #2 (see page 36) . This power save mode † turns the laser OFF after a configured per iod of non-use then turns the motor OFF after thirty-minut e intervals. Any movement detected by the IR in the activation [...]

  • Página 37

    31 S CANNER O PERATION I NDICATOR D ESCRIPTIONS Audible When in operation the Stratos S provides audible feedback that indicates the st atus of the unit and the current scan. Eig ht settings are available for the tone of t he beep (norma l, 6 alternate tones and no tone) plus three volume settings. To change the tone or volume, refer to the Changin[...]

  • Página 38

    32 S CANNER O PERATION I NDICATOR D ESCRIPTIONS Visual (Continued) Steady Blue and Single White Flas h When the scanner successfully reads a bar code, the white LED will flash and the sc anner will beep once. If the white LED does not flash or the scanner does not beep onc e, then the bar code has not been successfully read. Steady White and Blue A[...]

  • Página 39

    33 S CANNER O PERATION I NDICATOR D ESCRIPTIONS Diagnostic Indicator Dis play There is a two-digit error code displ ay located under horizonta l output window near the Metrologic logo on the platter (see figure below). Figure 31. Error Code Display (O ptional Product R oll Bar Shown) The following is a list of possible err or codes and their meanin[...]

  • Página 40

    34 S CANNER O PERATION I NDICATOR D ESCRIPTIONS Diagnostic Indicator Dis play E RROR C ODE D ESCRIPTION 13 SCALE ERROR The scanner does not communic ate with the scale. Make sure there is nothing plugged into the ‘ Scale RS232 to Host ’ port. If there is disconnect the cable, it may be causing the communication error. If there is still no commu[...]

  • Página 41

    35 S CANNER O PERATION I NDICATOR D ESCRIPTIONS Diagnostic Indicator Dis play E RROR C ODE D ESCRIPTION 27 Laser #1 (Vertical) Undercurrent Warnin g – The laser in the vertical scanning subsystem is dra wing too little current. The laser is probably not on. T his could be the result of a loss of the required set point in memory. Have the unit che[...]

  • Página 42

    36 S CANNER O PERATION P OWER S AVE M ODES The MS2220 has five configurabl e power save modes. Refer to the MetroSelect Configuration Guide for add itional information on Power Save Modes. 1. Blink Power Save Mode: Blinks the laser OFF & ON after a configured perio d of non-use. When the scanner recognizes a bar code it will exit the Blink mode[...]

  • Página 43

    37 S CANNER O PERATION B EEPER O PTIONS AND B UTTON F UNCTIONS Changing the Beeper To ne Beeper tones may be configured incrementa l ly using the following bar code. The ne w tone will be heard followed by a short pause. Two more new tones will be he ard signifying the new setting has b een stored in memory. The silent (no beep) tone is also select[...]

  • Página 44

    38 S CANNER O PERATION S TAR TUP When the scanner first receives po wer the white LED will flash, the bl ue LED will turn on and the scanner will beep once ( the white LED will remain on for the dur ation of the beep ). The scanner is now ready to scan. P OWER -U P T EST M ODE When a Stratos S scanner is first powered up, it cycles through a number[...]

  • Página 45

    39 S CALE O PERATION S CALE Z EROING After the unit has been officially calibrated (s ee page 40) the sca le can be re-zeroed by pr essing the scale zeroing button on either the unit or on the remote display stan d. When the scale is at ze ro the amber LED will be illuminat ed. Figure 36. The scale zero button on scanner/scale. Figure 37. The scale[...]

  • Página 46

    40 S CALE O PERATION C ALIBRATION The scanner/Diva scale must be cal ibrated if:  it is a first time installation  the scale cannot be re-zeroed  the calibration verification tests indic ate errors  there is a change in the units of measure [i.e. from pounds ( lbs.) to kilograms (kg)]  if the scale load cell has been replac ed  th[...]

  • Página 47

    41 S CALE O PERATION C ALIBRATION Priming the Scale for Calibra tion (lbs. or kg) Prime the scale before starting either method of calibration. Calibrate the scanner/Diva sc ale after the unit is installed in the checkout countertop. It is important to use the correct certified (lb. or kg.) field weight set w hen calibrating the scale. 1. Check the[...]

  • Página 48

    42 S CALE O PERATION C ALIBRATION Scale Calibration Procedu re (lbs. or kg) with Remote Display* 1. Temporarily remove the platter and plac e it in a safe location. It is the responsibility of the owner of the scale to c onfirm compliance with the rele vant Weights and Meas ures statutes and regulations appli cable in your area b y checking with th[...]

  • Página 49

    43 S CALE O PERATION C ALIBRATION Scale Calibration Procedu re (lbs. or kg) with Remote Display* 4. Reinstall the platter onto the s canner/Diva scale. Figure 44. Install Platter 5. Go to Group 1 Step 8 (Weight Unit) of the Service Mode by pressing the Zero ( ) key several times until ‘Group 1 Step 8’ is displayed on the Remote Scale Display sc[...]

  • Página 50

    44 S CALE O PERATION C ALIBRATION Scale Calibration Procedu re (lbs. or kg) with Remote Display 7. Go to Group 2 Step 6 (Calibration) of the Service Mode. Press the Tare ( ) key to advance to Group 2, then use the Zero ( ) key to advance to step 6 of group 2. 8. Press the Tare ( ) key to change the prompt to ‘YES’. 9. Press the Zero ( ) key to [...]

  • Página 51

    45 S CALE O PERATION C ALIBRATION Bar Code Calibration Procedure without Remote Display* The following calibration proc edure can be used when the remote scale display is not present. The Multi-Function Button (see page 37) is used to adva nce to the next stage of calibrati on and the LED disp lay notifies the operat or which ‘calibration stage?[...]

  • Página 52

    46 ³ 996042 S CALE O PERATION C ALIBRATION Bar Code Calibration Procedure without Remote Display* 4. Reinstall the platter onto the s canner/Diva scale (see Figure 48 ). Figure 48. Platter Installation 5. Enter bar code calibration mode. Use the vertical window to scan one of the fo llowing b ar codes, whi chever weight units (either pounds or kil[...]

  • Página 53

    47 ³ 996044 S CALE O PERATION C ALIBRATION Bar Code Calibration Procedure without Remote Display* Unit Calibration (Kilograms) For Pound weight units see instructions on page 4 6. Figure 50. Entering Bar Code Calibration Mode (Kilograms) If a razz tone sounds, an error has occurred. Refer to Diagnostic Indicator Displ ay; Error Codes starting on p[...]

  • Página 54

    48 S CALE O PERATION C ALIBRATION Bar Code Calibration Procedure without Remote Display* 6. Make sure there is no load on the scale platter. The white LEDs will be used to indicate the current step in the calibr ation process. 7. Calibrate a zero load. The white LEDs will blink once periodicall y. Wait 8 to 10 seconds for scale stability, and then [...]

  • Página 55

    49 S CALE O PERATION C ALIBRATION V ERIFICATION U.S. Pounds (lbs.) The following tests verify if the scale's Calibration is acc ura te. For Kilograms see instructions starting on page 50. The following tests are based on a 2-digit ac curacy setting for pounds.  Increasing Load Test  Shift Test  Decreasing Load Test  Return to Zero [...]

  • Página 56

    50 S CALE O PERATION C ALIBRATION V ERIFICATION Kilograms (kg) The following tests verify if the scale's Calibr ation is accu rate. For US Pounds see instructions starting on page 49. The following tests are based on a 3-digit ac curacy setting for kilograms.  Increasing Load Test  Shift Test  Decreasing Load Test  Return to Zero T[...]

  • Página 57

    51 S CALE O PERATION S ECURITY S EAL I NSTALLATION The certification of the weighing mechani sm of the scale version of this scanner is subject to federal, state and loca l Weights and Measures statutes and regulati ons and can only be performed by aut horized government agencies and/or their duly registered agents. Each time the scale or weighing [...]

  • Página 58

    52 S CALE O PERATION S ECURITY S EAL I NSTALLATION Wire Security Seal (Seal Conversion Kit MLPN 46-00359)* 1. Temporarily remove the platter and plac e it in a safe location. 2. Install the calibration button seali ng cover and through-hole seali ng screw. 3. Tighten the screw and route t he wire seal through the holes in the plat e and screw. Figu[...]

  • Página 59

    53 M AINTENANCE H ORIZONTAL S CAN W INDOW R EPLACEMENT Figure 61. Platter/Horizontal Scan Window Replacement * See replacement parts on page 4.[...]

  • Página 60

    54 M AINTENANCE V ERTICAL S CAN W INDOW R EPLACE MENT ( MLPN 46-00232) Figure 62. Vertical Scan Window Replacement D AILY M AINTENANCE Smudges and dirt can interfere with the prop er scanning of a bar code. Therefore, the horizonta l and vertical output windows will need occasional cle aning. For the glass window: 1. Spray glass cleaner onto lint f[...]

  • Página 61

    55 T ROUBLESHOOTING The following guide is for reference purposes only. Contact a Metrologic representative at 1-800-ID-MET RO or 1-800-436-3876 to preserve the limit ed warranty terms. Symptom Possible Caus e(s) Solution All Interfaces No LEDs, beep or motor spin. No power is being supplied to the scanner. Check the transformer, outlet and t he po[...]

  • Página 62

    56 T ROUBLESHOOTING Symptom Possible Caus e(s) Solution All Interfaces The unit scans a bar code, but locks up after the first scan ( the white LED stays on ). The scanner is configured to support some form of host handshaking but is not receiving the signal. If the scanner is setup to support ACK/NAK, RTS/CT S, XON/XOFF or D/E, verify that the hos[...]

  • Página 63

    57 T ROUBLESHOOTING Symptom Possible Caus e(s) Solution RS232 Only The com port at the host is not working or is not configured properly. The cable is not connected to the proper com port. The unit powers up OK and scans OK but does not communicate properly to the host. The com port is not operating properly. Check to make sure that the baud rate a[...]

  • Página 64

    58 T ROUBLESHOOTING RS232 D EMONSTRATION P ROGRAM If an RS232 scanner is not communicating with your IBM compatible PC, key in the following BASIC program to test that the communication port and scanner are working. This program is for demonstration purposes only. It is onl y intended to prove that cabling is correct, the com port is working, and t[...]

  • Página 65

    59 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS Many functions of the scanner can be "config ured" - that is, enabl ed or disabled. The scanner is shippe d from the factory pre- configured to a set of default conditions. The default p arameter of the scanner has an asterisk ( * ) in the charts on the following pages. If an asterisk is no[...]

  • Página 66

    60 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB RSS Expanded Enable 9 9 9 9 Expanded ID “]e0” * 9 9 9 9 RSS Limited Enable 9 9 9 9 RSS Limited ID “]e0” * 9 9 9 9 RSS Limited App ID “01” * 9 9 9 9 RSS Limited Check Digit * 9 9 9 9 DTS/SIEMENS 9 DTS/NIXDORF * 9 NCR F 9 NCR S 9 Beeper Tone Norm[...]

  • Página 67

    61 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB Dual Action Power Save Mode #1 9 9 9 9 Dual Action Power Save Mode #2 * 9 9 9 9 Same Symbol Rescan Timeout: 500 msecs Configurable in 50 msec steps (MAX 6.35 seconds) * 9 9 9 9 Intercharacter Delay Configurable in 1 msec steps (MAX 255 msecs) 1 msecs 10 ms[...]

  • Página 68

    62 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB Transmit UK Plessey Check Digit 9 9 9 9 EAN 128 Enable 9 9 9 9 Enable French Pharma 9 9 9 9 Enable Matrix 2 of 5 Check Digit 9 9 9 9 Enable Hong Kong 2 of 5 9 9 9 9 Enable Alpha Telepen 9 9 9 9 Telepen Convert Lead ‘^L’ to ‘E’ 9 9 9 9 Enable Code 1[...]

  • Página 69

    63 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB Recv “i” = Transmit Scanner ID Byte 9 STX Prefix 9 9 TAB Prefix 9 9 Metrologic Prefix 9 9 UPC Prefix 9 9 ETX Suffix 9 9 TAB Suffix 9 9 Carriage Return Suffix * 9 9 Line Feed Suffix * 9 9 UPC Suffix 9 9 Transmit LRC 9 9 Start LRC on 1 st Byte 9 9 Start [...]

  • Página 70

    64 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB Two Digit Redundancy 9 9 9 9 Five Digit Redundancy 9 9 9 9 Enable Coupon Code 128 9 9 9 9 Transmit Coupon ‘]C1’ * 9 9 9 9 Group Separator * 9 9 9 9 Coupon Code Can Begin with ’4’ 9 9 9 9 Enable EAN-99 Coupon Code 9 9 9 9 Bookland Supplements 9 9 9 [...]

  • Página 71

    65 D EFAULT S ETTINGS C OMMUNICATION P ARAMETERS Default settings for “ Aux ” interface The secondary scanner and t he MS2220 series always com municates via RS232. Data is relayed to the host via vari ous primary interfaces P ARAMETER D EFAULT OCIA RS232 IBM 46 XX USB Aux Baud Rate 38400 9 9 9 9 Aux Parity none 9 9 9 9 Aux Data Bits 8 9 9 9 9 [...]

  • Página 72

    66 S CANNER AND C ABLE T ERMINATIONS S CANNER P INOUT C ONNECTIONS The MS2220 Series scanner interfaces termi nate to 10-pin modula r jacks located on the bottom of the units. T he serial number label indicates the model numb er of the scanner. EAS In Auxiliary RS232 In Pin Function Pin Function 1 EAS In 1 Ground 2 EAS Out 2 RS232 Receive Input 3 R[...]

  • Página 73

    67 S CANNER AND C ABLE T ERMINATIONS S CANNER P INOUT C ONNECTIONS Figure 64. Scale Connector Layout Scale RS232 to Host Scale Data, Dual Cable Applic ations Scale to Display Pin Function ** Pin Function ** 1 Ground 1 SIG1 2 Scale RS 232 TX Out 2 SIG2 3 Scale RS 232 RX In 3 SIG3 4 Scale RS 232 RTS Out 4 SIG4 5 Scale RS 232 CTS In 5 SIG5 6 No Co nne[...]

  • Página 74

    68 S CANNER AND C ABLE T ERMINATIONS C ABLE C ONNECTOR C ONFIGURATIONS RS232 Interface Cable, MLPN 57-5721 0 x -N-3 Pin Function ** 1 No Connect 2 RS232 Transmit Output 3 RS232 Receive Input 4 DTR Input 5 Power/Signal Ground 6 DSR Output 7 CTS Input 8 RTS Output 9 No Connect 9-Pin D-Type Connector Full Speed USB Cable, MLPN 57-57201 x -N-3 or MLPN [...]

  • Página 75

    69 S CANNER AND C ABLE T ERMINATIONS C ABLE C ONNECTOR C ONFIGURATIONS Aux Port Configuration Cabl e*, MLPN 57-57008 x -N-3 Pin Function** 1 No Co nnect 2 Output from Scanner 3 Input to Scanner 4 No Co nnect 5 Ground 6-9 No Connect 9-Pin D-Type Connector RS232 LSO/AUX Cable, MLPN 57-57099 x -3 Pin Function † 1 Signal Ground 2 RS232 from Aux / Sec[...]

  • Página 76

    70 R EGULATORY C OMPLIAN CE S AFETY ITE Equipment IEC 60950-1; EN 60950-1 Laser Laser Class 1: IEC 60825-1:1993+ A1+A2, E N: 60825-1:1994+A1+A2 Caution Use of controls or adjustments or performa nce of procedures other than those specif i ed herein may result in hazard ous laser light exposure. Under no circumstances should the custome r attempt to[...]

  • Página 77

    71 R EGULATORY C OMPLIAN CE EMC Emissions: FCC Part 15, ICES-003, CISPR 22, EN 55022 Immunity: CISPR 24, EN 55024 Class A Devices The following is applicable wh e n the scanner cable is greater in length than 3 meters (9 .8 feet) when fully extended: Les instructions ci-dessous s’ap pliquent aux cables de sca nner dép assant 3 métres (9.8 pieds[...]

  • Página 78

    72 R EGULATORY C OMPLIAN CE EMC Class B Devices The following is applicable w hen the scanner cable is less than 3 meters (9.8 feet) in length when fully extended: Les instructions ci-dessous s’ap pliquent aux cables de scan ner ne dépassant pas 3 métres (9.8 pieds) de long en extension maximale: Folgendes trifft zu, wenn das Scanne rkabel kür[...]

  • Página 79

    73 L IMITED W ARRANTY The MS2220 Stratos S ™ Serie s scanners are manufactured by Metrologic at its Black wood, New Jersey, U.S.A. facility. The MS2200 Stratos S Series scanners have a t wo (2) year limited warranty from the date of manufacture. Metrologic warrants and represents that all MS222 0 Stratos S Series scanners are free of all defects [...]

  • Página 80

    74 P ATENTS For patent information, please refer to www.honeywellaidc.com/patents .[...]

  • Página 81

    75 I NDEX A AC ...................................................................... see power amber LED .................................................... see indicators application ................................................................. 33, 58 audible........................................................... see indicat ors AUX ....[...]

  • Página 82

    76 I NDEX R razzberry tone ..................................................... 31, 32, 60 regulatory co mpliance ............................................... 70–72 remote displa y ....................................................... 3, 43, 50 repair ............................................................. 32, 33, 34, 73 RS232 .......[...]

  • Página 83

    [...]

  • Página 84

    [...]

  • Página 85

    [...]

  • Página 86

    December 2006 (Version 1) Printed in the USA 00 - 0227 4 A[...]