POSIFLEX Business Machines 16560900020 manual

Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are d[...]

Part 2 ALERT TO OUR HONORABLE CUSTOMERS: z Please always rea d thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. z This product contains inside a Lithium battery and maybe also a sealed type Lead acid b[...]

Part 3 INTRODUCTION PRODUCT PICTURES Front Views Side Views Rear Views 7 5 1 3 6 11 8 9 4 2 8 9 12 5 1 3 7 10 6 2 11 13 10 4 6 13 6 7 14 11 13 21 15 17 Inside the touch open cover 18 19 20 6 13 13 7 16 6 22 2 4 13 22 13 6 22 7 15 w/ Gen 5 base w/ Gen 6 base w/ Gen 5 base w/ Gen 6 base w/ Gen 5 base w/ Gen 6 base w/ Gen 5 base w/ Gen 6 base w/ Gen 5[...]

Part 4 Bottom View s PARTS IDENTIFICATION 16. Optional top mount upgrade ki t e.g. PD- 310 or PD- 2604 17. Power switch 18. Brightness adjust p ush button “ + ” 19. Touch open door latch 20. Brightness adjust push button “ - ” 21. Double deck USB ports 22. Cable exit 23. Base mount device cable groove (for Gen 5 Slim base) 24. Cable holder [...]

Part 5 PRODUCT FEATURES Standard Features: a) Applicable CPU: 1. for KS-6615 only: Intel Celeron M 1.0 GHz 2. for KS-6615 / 6617: Interl Celeron M 1.5 GHz 3. for KS- 7315 / 7317: Intel Celeron M 1.86 GHz or Core Duo 2.0 GHz or Core 2 Duo 2.16 GHz b) Fan free structure with Aluminum main unit for harsh environment c) Data storage device: SATA HDD 2.[...]

Part 6 11. one UPS battery connector m) Touch control functions : left/right button, double click, drag & draw n) Dual display support (per OS capability) o) Dynamic video memory (max. 128 MB for KS-6615 / KS- 6617, max. 224 MB for KS-7315 / KS- 7317) p) Support high performance DDR2 DRAM with maximum memor y size 1GB for KS-6615/6617 and 2GB f[...]

Part 7 IN STAL LATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high voltage hazard or electrostatic discharge damage [...]

Part 8 when disconnecting any connector. Failure to do this could damage the cable and jack that is considered as an artificial destruction. Damages due to incorrect disconnection operation are not covered by product warranty! SEPARATING MAIN UNIT In order to settle the touch terminal properly in a point of sale system, all the cable connections ha[...]

Part 9 battery cable. The UPS battery will be held in place when the bottom plate is screwed back. As for gen 6 super slim base model, please remove the UPS battery bracket on bottom of the stand assembly instead of the bottom plate as in the right picture. Please pay particular attention to the environment requirements for UPS battery in next chap[...]

Part 10 ROUTING THE CABLES The designed cable routing for all external cable connections referring to the pictures above is to have all the cables coming from outside into the cable exit (position A ) at bottom side of gen 5 slim base and to be regulated into the two cable holders ( B ) then enter the base through the passage ( C ). The cables s ho[...]

Part 11 window are designated for VGA port and COM port power supply function. Please consult your dealer for technical support on setup of these jumpers. Please note that only those qualified technicians may adjust in the service window with information from Posiflex and the contents in the service window may change without notice as time develops[...]

Part 12 the DC supply in COM port is not required, it will be powered through the USB port. CONNECTING CASH DRAWER (OPTION) The RJ11 connector in main connection area of a KS system can be used for controlling most of the common cash drawers available on the market. However, it is most recommended that the Posiflex CR-2000 or CR- 2200 or CR-3100 or[...]

Part 13 Back side of WB-6000VB Then slide the main unit down to move the pegs into the lower slot part of the holes till it clicks. Note that all the cables come out of the stand from the lower edge and won’t get trapped by this mounting operation. If later on you want to remove the main unit from the stand, you’ll have to press down the lock/r[...]

Part 14 15”85.1/89.4T 17 ” 89 8/94 1T Align the four matching pegs on the back of the main unit as circled in the below left picture with the four matching holes in the wall mount brackets as also marked in circles in the top pictures and allow the main unit to slide down the winding grooves in the wall mount backpack. Connect all cables coming[...]

Part 15 For KS systems preloaded with Windows XP Pro or WEPOS on HDD, Posiflex provides recovery CD or DVD delivered with the touch terminal for the preloaded operating system. The System Integrator shall take care of software restoration after OS recovered. A Posiflex supplied USB interface CDROM drive will be required for such action. Other brand[...]

Part 16 be powered off for more than few days, please always disconnect the battery from the system . R econnect it and turn on the system to recharge the battery for 1 ~ 2 hours every 3 months for temperature lower than 30  C. Recharge for 1 ~ 2 hours every month for temperature over 30  C. Temperature above 40° C must be strictly avoided a[...]

Part 17 POWER ON/OFF & BRIGHTNESS CONTROL Touch Open Cover A gentle tap on the touch open cover at left side of the main unit will open the cover and show the power switch, brightness adjust push button switches and a double deck USB connector. Each single press on the + or – button changes the LCD panel display brightness by a small amount. [...]

Part 18 LAN Wake up: Power Management -- Wake- Up by PCI card RING Power Management -- Power On by Ring Time Power Management -- Resume by Alarm this forced power off, please disconnect the UPS battery if installed and the AC power supply for few minutes. This may reset all hardware registers. This switch can also be programmed as an ON only switch[...]

Part 19 Advanced Chipset Features On-Chip Frame Buffer Size 8MB(1MB, 4MB, 8MB, 16MB, 32MB) DVMT Mode DVMT (FIXED, DVMT, BOTH) DVMT / FIXED Memory Size 128MB (64MB, 128MB) DISPLA Y ISSUES Main LCD Display For best viewing result please set your display resolution at 1024 x 768 with high color for KS-6615/73 15 and set it at 1280 x 1024 with high col[...]

Part 20 Mouse Emulation The touch panel in KS system uses USB interface as standard. Only the optional InfraRed type touch panel model uses RS232 interface. When the touch driver is properly installed, this touch panel works exactly like a standard mouse for both interfaces. However, if the system is running under safe mode, most drivers are disabl[...]