POSIFLEX Business Machines KS-6215 manual

Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply wit h limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are [...]

Part 2 ALERT TO OUR HONORABLE CUSTOMERS: l Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. l This product contains inside a Lithium battery and maybe also a sealed type Lead acid ba[...]

Part 3 IN TRODUCTION PRODUCT PICTURES Front Views for KS - 6315/6217; AMD LX - 700 for KS - 6115 1. one optional Compact Flash memory card connector 2. one IDE connector and HDD power conn ector for HDD in base ² SD500 covering options of USB interface WiFi and Audio ports ² Bar code card reader BC - 3 00U Side Views Slim base 6 3 4 1 1 Universal[...]

Part 4 Rear Views Bottom Views PARTS IDENTIFICATION 1. Main unit 2. Touch panel / LCD panel 3. Opti onal side mount kit e.g. SD - 400 4. Power indicator 5. Universal base stand 6. Slim base stand 7. Cable cover 8. Removal hollow in cable cover 9. Lock / release lever for tilt angle adjust 10. Lock / release button for main unit detach 11. Touch ope[...]

Part 5 20. Auxiliary cable exit 21. Rubber feet 22. Optional CDROM drive PRODUCT FEATURES Standard Features: a) CPU: VIA C 7 1.0 G Hz or above b) Fanless structure w ith Aluminum die cast main unit casing for harsh environment or metal c) Data storage device: SATA HDD 3.5” 8 0 GB in base stand or IDE HDD 2.5” 40 GB in main unit or uDOC . d) An [...]

Part 6 11. 2 SATA ports for Serial ATA HDD in base or external device m) Touch control functions : left/right button, double click, drag & draw n) Dual display support (per OS capability) o) VGA memory size shared from system memory ( 16 ~ 64 MB) p) Support high performance DDR 2 SO - DIMM S DRAM with maximum memory size 1 GB in one module q) I[...]

Part 7 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make cert ain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high voltage hazard or electrostatic discharge damage u[...]

Part 8 SEPARATING MAIN UNIT In order to settle the touch terminal properly in a point of sale system, all the cable connections have to be routed through its base, either slim or universal. Therefore, please observe the procedures from A to C below to separate the main unit from both slim and universal base stand assembly after all cables in cable [...]

Part 9 CABLE PASSAGE Please route all cables through the cable passage to main unit in desktop mount application. Hold them together with the cable tie. Pass all cables (but those for HDD and UPS bat tery) through the cable exit to external connections. For slim base models in desktop mount application, when cable connection through a hole on deskt[...]

Part 10 pay particular attention to the environment requirements for UPS battery in next chapter “USING THE TOUCH POS”. BASE MOUNT UPGRADE KIT On rear edge of the stand assembly for desktop mount application, there is a rear connect cover. Either a 2nd LCD display panel option LM - 6201 or a VFD customer display option PD - 2501 can be installe[...]

Part 11 guide to mount the interface bracket and fix it to the rear connect area of the system as in the right picture. Route the VGA through the cable exit of the base stand to the main unit. Connect the attached power adaptor for its power source. ROUTING THE CABLES Place all the cables required for connections to the main unit except those for t[...]

Part 12 arr owed in same picture. Gently arrange the excessive length of this cable back in the hole and screw - fit it back to the position originally occupied by the cover . Please reserve the cover if there is chance to have the side mount kit removed in the future. D ESKTOP MOUNTING KS6115:258~355 Match the matching pegs on the back of the main[...]

Part 13 The area required for wall mount application is determined by the main unit dimensions and is 3 78 mm in width and 3 12 mm in height for KS - 6215 and is 4 10 mm in width and 3 55 mm in height for KS - 6217. CONNECTING CABLES To re - assemble the main unit with stand assembly for operation, please connect all required cables to the appropri[...]

Part 14 there be any difficulty in using the Posiflex supplied USB interface CDROM drive in recovery, please try disable the USB 2.0 function of system BIOS setup by going to “ Integrated Peripherals ” then “ VIA OnChip PC I Device ” and set the item “ OnChip EHCI Controller ” to be “ Disable ” for the recovery process and make it b[...]

Part 15 USING THE TOUCH TERMINAL APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. There must be at least 25 mm air clearance around any top or side ventilation holes with a free flow of air around the unit a[...]

Part 16 Emergency treatment: The battery is constructed maintenance free and leakproof. It is well protected in KS system as long as the ambient temperature remains below 30 ° C and the ventilation of the KS system remains free. However, should any accident happen and the sulfuric acid from the battery spills on skin or clothing, wash immediately [...]

Part 17 The relationship between the indicator status and other conditions is summarized in following table: Indicator St atus System Status External Power UPS Battery Powering Up Off Off Off Not present Not possible Off Off Off Present Not allowed Green Off On No influence Allowed Blue On On No influence Not required Blue/flash On Off Activated No[...]

Part 18 Automatic Power On Control The system may also turn on according to some preset c onditions such as Modem Ring Up and Alarm Clock Wake Up or LAN Wake Up. To utilize Modem Ring Up or Alarm Clock Wake Up function, the user should enter the CMOS setup by pressing “Del” key at system boot up, choose for “PM Wake Up Events” in “Power M[...]

Part 19 SERIAL PORTS – COM1/2 /3/4 In KS system , there are 4 serial ports in form of 10 pin RJ45 jacks available. All serial port s can supply a +5 V DC through pin 9 after proper jumper setting change. All ports are standard RS232 serial ports after the conversion cables as status at delivery . Since there are only 2 conversion cables delivered[...]

Part 20 TOUCH PANEL All paragraphs below are applicable for models with touch panel only. The user of those models without touch panel can ignore them and consider this user ’ s manual ends here. Mou se Emulation The touch panel in KS system uses internal USB interface as standard and occupies no external port . Only the optional InfraRed type to[...]