Trilogy Touch Technology T3-HB17A1 manual

Trilogy Touch Technology 17” Chassis Touch Screen Monitor T3 - HB17 A1[...]

Table of Contents GETTING STARTED 1 Introduction Features Unpacking and Checking of the Package Contents Accesso ries Included System Requirements Mounting Using Input INSTALLING THE MONITOR 3 Connecting the Monitor OPERATING THE MONITOR 4 Adjusting the Viewing An gle Operating Procedure Additional information about the On - Screen - Display Menu T[...]

Copyright © 2004, Trilogy Touch Technology, Inc. All rights reserved The information contained in the document is subject to change without notice. Nor does the contained information constitute a warranty, either expressed or implied or as an obligation by Trilogy Touch Technology. Trilogy Touch Technology shall not be liable for the acc uracy of [...]

Page 1 GETTING STARTED WARNING: Do not operate the LCD Monitor with an unknown utility power voltage source. Usage of incorrect voltage may cause malfunctions and could cause fire or electric shock. INTRODUCTION Thank your for your selection of this Trilogy Touch Tec hnology product. Bright and sharp images of text and graphics are what you will fi[...]

Page 2 SYSTEM REQUIREMENTS The following are basic requirements for using the Monitor. Please check the specifications and Supported Video Timi ng section of this Users Guide for specifics. • This monitor requires conn ection to a personal computer. Both industry standard architecture and Macintosh hardware is supported. • Various Operating Sys[...]

Page 3 INSTALLING TH E MONITOR • DO NOT install the monitor in areas where sudden temperature changes may occur, or in humid, dusty, or smoky environments as it may cause fire, electric shock or damage. • DO NOT expose this product to rain, water, moisture, or sunlight • MAINTAIN good ventilation; covering of ventilation slots or holes may ca[...]

Page 4 OPERATING THE MONITOR Users can adjust the picture to the desired brightness and sharpness by following these instructions. The adjustment buttons utilize a security feature that required the use of a paper clip or pin t o activate each selection. This is accomplished through pinholes in each button except the power on/off. 1 Power Switch Po[...]

Page 5 HOW TO USE THE OSD (ON SCREEN DISPLAY) The OSD function allows the user to easily adjust the display to the desired requirements. The OSD menu includes a main menu and sub - menus. OPERATIN G PROCEDURE Use the buttons on the right side control panel to adjust the OSD (see Operating the Monitor). TO MAKE OSD ADJUSTMENTS: 1. Power on the LCD M[...]

Page 6 Brightness Press the Brightness Button (3) when the Menu is not displayed. Contrast: Press the Contrast Button (2) when the Menu is not displayed. Auto Set ting : Press the Auto Button (5) when the Menu is no t displayed. made in the “Settings” submenu. • Any changes made are automatically saved in the Monitor memory when the OSD disap[...]

Page 7 MENU TABLE Primary Directory Secondary Directory Description Image Brightness Adjust the brightness of the screen. Contrast Adjust the contrast of the image. Clock Adjust the clock pulse of the image. Phase Adjust the focus of the image. H. Position Move the image left and right on the screen. V. Position Move the image up and down on the sc[...]

Page 8 FOR YOUR SAFETY WARNING • ALWAYS OPERATE UNDER KNOWN POWER SUPPLY Usage of incorrect voltage will cause malfunctions and may cause fire or electric shock. • PROTECT and CORRECTLY USE THE SIGNAL CABLES Do not pull or bend the power cable and signal cable or place the monitor or any heavy objects on the cables. If th e cables are damaged, [...]

Page 9 SPECIA L NOTES ON LCD MONITORS The following are normal with LCD Monitors and do not indicate a problem. • When the LCD Monitor is first powered on, the picture may not fit in the display area. This is because of the type of computer graphics system that is used . In such case, adjust the picture position to a desired image (See Operating [...]

Page 10 POWER MANAGEMENT This LCD Monitor complies with the VESA DPMS (version 1.0p) power management specification. DPMS provides four types of power saving modes by detecting the horizontal or vertical sync signal. As well, the computer graph ic card also needs to be DPMS compliant to utilize these modes. Item DPMS Mode Display Power LED Power Co[...]

Page 11 PROBLEM CHECK TO SEE: No Display. Is the power cord is firmly plugged in the socket. Is the power switch is turned on. a) Power indicator does not light up. Is the AC outlet is OK. Please check using another piece of equipment. Is a blank screen saver is active, use the keyboard or mouse to activate. I ncreasing the CONTRAST and/or BRIGHTNE[...]

Page 12 CONFORMITY AND COMPLIANCE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfere nce when the equipment is operated in a residential installation. This [...]

Page 13 PRODUCT SERVICE AND SUPPORT Should this product fail or require service, please contact your Dealer or Distributor for service or support. The Dealer or Distributor may have specific programs for support of this product, or may provide specific services outside the scop e of the manufacturer’s original warranty. Should support from the ma[...]

Page 14 Warranty (United States) Trilogy Touch Technology TOUCH MONITOR LIMITED WARRANTY A. Limited Warranty Trilogy Touch Technology, Inc. (“Trilogy”) warrants the TFT - LCD touch monitor(s) (“the Mo nitor”) or (“product”) you have purchased from Trilogy or from a Trilogy Authorized Reseller, to be free from defects in materials and wo[...]

Page 15 C. Trilogy Service Policies Product service is subject to the following terms and conditions. Customers may contact their dealer or distributor for their respective service entitlement and policies. 1. Service is available for Monitors purchased and located in the continental United States, Canada, Alaska, Hawaii and Puerto Rico. Shipments [...]

17” Chassis Monitor T 3 - HB17A1 Dimension Drawing Trilogy Touch Technology Dimensions in mm[...]