Abit Fatal1ty F-I90HD manuel d'utilisation

Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix F-I90HD Motherboard Socket 775 User’s Manual For more information: www.abit.com.tw  LGA775 Micro ATX  NB: ATI Radeon Xpress 1250 SB: ATI SB600  1066/800MHz FSB  Dual Channel DDR2 800/667/533  ATI Radeon Xpress 1250 Integrated Graphics  PCI Express Slot  [...]

ii F-I90HD F-I90HD User’s Manual English + Multilingual QIG P/N: 4310-0000-83 Rev. 2.00, April 2007 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes n o lia b ility or resp onsibility f or any err ors that may appear in this ma[...]

Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix F-I90HD iii Introduction FATAL1TY STORY Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually played competitive billiards in p rofessional tournaments and won four or five games off guys who played at th e highest level. I actually thought o[...]

iv F-I90HD FATAL1TY PARTNERS This is jus t the beginning. We’re already in development for several new produc ts, and I’m really grateful to all my Fatal1ty partners for help ing make my dr eams a reality. I know there is a business side to all of this, b ut for me the true reward is ma king products that are so good I can win wit h them – an[...]

Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix F-I90HD v Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specif ications ............................................................................... 1-1 1.2 Motherbo ard Layout ............................................[...]

vi F-I90HD 3.2 ATi South Br idge Dr iver ................................................................ 3-2 3.3 Microsoft.NE T Framework ............................................................. 3-2 3.4 ATi VG A Driver ............................................................................. 3-3 3.5 Realtek LAN Dr iver ...................[...]

Hardware Setup F-I90HD 1-1 1. Hardware Setup 1.1 Specifications CPU • Designed for Intel Dual Core LGA775 processor wit h 1066/800MHz FSB • Support Intel Core 2 Extreme, Core 2 Quad, Core 2 Duo, Pentium EE, Pentium D, Pentium Dual Core, and Pentium 4 Processor Chipset • NB: ATI Radeon Xpress 1250 • SB: ATI SB600 Memory • 4x 240-pin DIMM s[...]

1-2 F-I90HD 1.2 Motherboard Layout[...]

Hardware Setup F-I90HD 1-3 1.3 Choosing a Computer Chassis • Choose a chas sis big enou gh to instal l this motherboard. • As some features for this motherboard are implement ed by cabling c onnectors o n the motherboard to indicat ors and swit ches or butt o ns on the chassis, make sure your chassis supports all the features requi red. • If [...]

1-4 F-I90HD 1.5 Checking Jumper Settings • For a 2-pin ju mper, plug the jumper cap on both p ins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. SHORT OPEN OPEN • For 3-pin jumper, pi n 1~2 or pin 2~3 can be shorte d by plugging th e jumper cap in. Pin 1~2 SH[...]

Hardware Setup F-I90HD 1-5 CMOS Backup Battery: An onboard battery saves the CMOS m emory to keep the BIOS information stays on even after disconnected your system with power source. Ne vertheless, this backup b attery exhausts after some five years. Once the error message like “ CMOS BATTERY HAS FAILED ” or “ CMOS checksum error ” displays[...]

1-6 F-I90HD 1.6 Connecting Chassis Components 1.6.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As t he plugs from t he power supply fi t in only one orientati on, find the c orrect one and push firmly down in to these connectors. ATXPWR1: ATX 24-Pin Power Connector The power supply wi th 20-pin or 24- pin[...]

Hardware Setup F-I90HD 1-7 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pi n position and orientatio n. The mark “+” align to the pin in the fig ure below stands for pos itive pol arity for th e LED connectio n. Please pay atten[...]

1-8 F-I90HD 1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidental scratch of a tiny surface-mount co mponent may seriously damage the motherboard. ※ In order to protect the contact pins, pl ease pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch th[...]

Hardware Setup F-I90HD 1-9 5. Use your left hand to hold the load plate, and use your right t humb to peel the cap o ff. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 6. Lower the plate onto the CPU package. Engage the load lever w hile gently pressing down the l[...]

1-10 F-I90HD 1.7.2 DDR2 Memory Slots To reach the performance of Dual Channel DDR2, the following rules must be obeyed: • For a 2-DIMM dual-channel installation: Populate DIMM modules of the same type and size on slots [ DIMM1 ]+[ DIMM3 ], or slots [ DIMM2 ]+[ DIMM4 ]. • For a 4-DIMM dual-channel installation: Populate 2 DIMM modules of the sam[...]

Hardware Setup F-I90HD 1-11 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy d rives with a 34-wire, 2-connector flopp y cable. Connect the single end at the longer length of rib bon cable to the FDC1 on the board, the tw o connectors on the other end to the floppy disk drives[...]

1-12 F-I90HD 1.8.2 Serial ATA Connectors Each SATA connector serves as one single channe l to connect one SATA d evice by SATA cable. The RAID 0/1/0+1 configuratio n is also poss ibl e by the combination of disk arrays through these SATA connectors: For more information on how to configure the func tion mode for SATA, please refer to the item “On[...]

Hardware Setup F-I90HD 1-13 1.8.3 Additional USB 2.0 Port Headers Each header support s 2x additio nal USB 2.0 po rts by co nnecting brack et or cable t o the rear I/O panel or the front-mounted USB ports of your chassis. Pin Pin Assignment Pin Pin Assignment 1 VCC 2 VCC 3 Data0 - 4 Data1 - 5 Data0 + 6 Data1 + 7 Ground 8 Ground 10 NC ※ Make sure [...]

1-14 F-I90HD 1.8.4 Internal Audio Connector This connector connects to the audio output of internal CD-ROM drive or ad d-on card. 1.8.5 Front Panel Audio Connection Header This header provides the front pane l connection for HD (High Definition) Audio, yet for AC’97 Audio CODEC connection, you must carefully check the pin assignment bef ore conne[...]

Hardware Setup F-I90HD 1-15 Driver Configuration for AC’97 audio connection: The audio driver is originally config ured to support HD Audio. For AC’97 audio connection, you may: 1. Right-click the “Realtek HD Audio Manager” ic on in system tray. 2. Click “Audio I/O” tab, and then click “Connector Settings”. 3. Click “ Disabled fro[...]

1-16 F-I90HD 1.8.6 PCI and PCI Express X16, X1 Slots Install PC I Express X16 graphics card i nto slot “PCIEXP1”. Install PC I Express X1 card int o slot “PCIE1” and/or “PCIE2”. Install PCI card into slot “PCI1 ”. 1.8.7 TV-OUT Header This header is reserv ed for connecti ng an optional TV-Out card (Model name: HDTV-10).[...]

Hardware Setup F-I90HD 1-17 1.9 Onboard Indicators and Buttons 1.9.1 LED Indicators • 5VSB: This LED lights up w hen the power su pply is connected with p ower source. • VCC: This LED lights up w hen the system power is on.[...]

1-18 F-I90HD 1.10 Connecting Rear Panel I/O Devices The rear I/O part of thi s motherboard provi des the foll owing I/O ports: • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • VGA1: Connects to monitor input. • HDMI1: Connects to multimedia devices of HDMI protocol. To enable this HDMI function, you will have to: (1[...]

BIOS Setup F-I90HD 2-1 2. BIOS Setup This motherboard pr ovides a programm able EEPROM so that you can up date the BIOS utility. The BIOS (Basic Input/Output System ) is a program that de als with the basic level of communicati on between processo r and peripherals. Use t he BIOS Setup program only when installing motherboard, reconfiguring system,[...]

2-2 F-I90HD 2.1 SoftMenu Setup This option configures the CPU’s clock and voltage. Phoenix – AwardBIOS CMOS Setup Utility SoftMenu Setup Brand Name: Genuine Intel(R) CPU 2.80GHz Item Help Frequency : 2.80GHz CPU Operating Speed 2800(200) x - External Clock 200MHz x - Multiplier Factor 14 X x - Estimated New CPU Clock 2.80GHz x - DRAM Spec. (CPU[...]

BIOS Setup F-I90HD 2-3 - Estimated New CPU Clock This item displays an estimated CPU pr ocessor speed. - DRAM Spec. (CPU:DRAM) This item determines the DRAM frequency. Voltages Control This option allows you to switch betw een the default and user-defined voltag es. Leave this setting at default unless the current voltage setti ng cannot b e detect[...]

2-4 F-I90HD  IDE Channel 1 Master/Slave, SATA Channel 1~4 Click <Enter> key to enter its submenu: Phoenix – AwardBIOS CMOS Setup Utility IDE Channel 1 Master IDE HDD Auto-Detection Press Enter Item Help IDE Channel 1 Master Auto Access Mode Auto Capacity 0 MB Cylinder 0 Head 0 Precomp 0 Landing Zone 0 Sector 0  :Move Enter:Se[...]

BIOS Setup F-I90HD 2-5 Landing Zone This item displays the numb er of cylinders specified as the landing zone for the read/write heads. Sector This item configures the num bers of sectors per track.  Back to Standard CMOS Features Setup Menu Drive A This item sets the type of flopp y drives installed. Floppy 3 Mode Support This item allows you t[...]

2-6 F-I90HD 2.3 Advanced BIOS Features Phoenix – AwardBIOS CMOS Setup Utility Advanced BIOS Features Hyper-Threading Technology Enabled Item Help Quick Power On Self Test Enabled ► CPU Feature Press Enter ► Hard Disk Boot Priority Press Enter First Boot Device Floppy Second Boot Device Hard Disk Third Boot Device IDE CDROM Boot Other Device E[...]

BIOS Setup F-I90HD 2-7 Thermal Control This option enables or disables the thermal monitoring. Limit CPUID MaxVal When set to [Enabled], this item limits the CPUI D maximum value to 3, w hich is usually required for older OS like Windows NT4.0. Leave this item at its default [Disabled] setting s for OS like Windows XP. C1E Function This item appear[...]

2-8 F-I90HD [Off]: The numeric keypad functions as arrow keys. Security Option This item determines when the system will prompt for p assword - every time the system boots or only when enters the BIOS setup. [Setup]: The password is required only when accessing the BIOS Setup. [System]: The password is required eac h time the computer boots up. ※[...]

BIOS Setup F-I90HD 2-9 2.4 Advanced Chipset Features Phoenix – AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectable By SPD Item Help x - CAS Latency Time (tCL) 5 x - RAS# to CAS# Delay (tRCD) 5 x - RAS# Precharge (tRP) 5 x - Precharge Delay (tRAS) 15 x - Refresh Cycle Time (tRFC) 20 GFX Link Width x16 Surround View Functi[...]

2-10 F-I90HD HDMI Port Display This item selects the type of disp lay device connected through the “HDMI Port” on this motherboard. [DVI]: Select this option if you are connecting a non-HDMI monitor through the “HDMI Port” on this motherboard. This is the d efault setting. [Normal]: Select this option if you are connecting HDMI dig ital dis[...]

BIOS Setup F-I90HD 2-11 Bus Master This option enables or disables the I DE bus mastering cap ability under the DOS environment. OnChip SATA Controller This option enables or disables the onchip SATA controller. OnChip SATA Mode This item selects the mode for de vices connected through SATA ports.  OnChip PCI Device Click <Enter> key to en[...]

2-12 F-I90HD  Super-IO Device Click <Enter> key to enter its submenu: Phoenix – AwardBIOS CMOS Setup Utility Super-IO Device Floppy Disk Controller Enabled Item Help  :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Floppy Disk Controller Th[...]

BIOS Setup F-I90HD 2-13 2.6 Power Management Setup Phoenix – AwardBIOS CMOS Setup Utility Power Management Setup ACPI Suspend Type S3(Suspend To RAM) Item Help - Resume by USB From S3 Enabled Power Button Function Instant-Off Wake Up by PME# of PCI Disabled Wake Up by Onboard LAN Disabled Wake Up by Wake# of PCIe Disabled Wake Up by Alarm Disable[...]

2-14 F-I90HD - Date (of Month) Alarm [0]: This option pow er-on the system everyday according to the tim e set in the “Time (hh:mm:ss) Alarm” item. [1-31]: This option selects a date you would like the system to power-on. The system will power-on on the date set, and the tim e set in the “Time (hh:mm:ss) A larm” item. - Time (hh:mm:ss) Alar[...]

BIOS Setup F-I90HD 2-15 2.7 PnP/PCI Configurations Phoenix – AwardBIOS CMOS Setup Utility PnP/PCI Configurations Resources Controlled By Auto Item Help x - IRQ Resources Press Enter PCI/VGA Pallete Snoop Disbaled PCI Latency Timer(CLK) 64 ** PCI Express relative items ** Maximum Payload Size 4096  :Move Enter:Select +/-/PU/PD:Value F1[...]

2-16 F-I90HD PCI Latency Timer (CLK) This item controls how long each PCI d evice ca n hold the bus before another takes over. When set to higher values, every PCI device can cond uct transactions for a longer time and thus improve the effective PCI band width. For better PCI p erformance, you should set the item to higher values. Maximum Payload S[...]

BIOS Setup F-I90HD 2-17 CPU FanEQ Control This item allows you to control the CPUFAN speed. When set to [E nabled], the following items become configurable. - FanEQ Target Temp. This item sets the temperature mark for th e “CPU FanEQ” function to take effect. - FanEQ Temp. Tolerance This item sets the temperature tolerance range for the item ?[...]

2-18 F-I90HD Shutdown When FAN Fail When set to [Enabled], the system will be shut down if the CPU fan is not running. CPU Shutdown Temperature This item sets the temperature that will shutd own the system automatically in order to p revent system overheats. CPU Warning Temperature This item selects the CPU’s warning tem perature limit. Once the [...]

Driver & Utility F-I90HD 3-1 3. Driver & Utility The “Driver-&-Utility CD” that came packed with this motherboard contains d rivers, utilities and software applications required for its basic and advanced features. 3.1 CD-ROM AUTORUN To run the CD-ROM automatically: 1. Place the “Driver-&-Utility CD” into the CD-ROM drive in[...]

3-2 F-I90HD 3.2 ATi South Bridge Driver This program enab les the chipset function. ※ Please install this driver first after having installed the Windows operating system. To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ ATi South Bridge Driver ] item. The installation screen appears. 3. Fol[...]

Driver & Utility F-I90HD 3-3 3.4 ATi VGA Driver This program enab les the [ VGA1 ] connector function. To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ ATi VGA Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation. 3.5 Realtek LAN Driv[...]

3-4 F-I90HD 3.6 Realtek Audio Driver (ATi HDMI) This program is c apable of enablin g function f or both [ AUDIO1 ] and [ HDMI ] connectors located at rear I/O panel. ※ Before installing the ATi HDMI driver together with the Realtek audio driver, you will have to select the option [Norma l] for the “HDMI Port Display” in BIOS Setup Menu “Ad[...]

Driver & Utility F-I90HD 3-5 To enable the audio function through HDMI connector: 1. Double-click the “ Sounds and Audio Devices ” icon through Windows’ Control Panel to enter its properties. 2. You may also get in the “ Multimedia” menu directly by right-clicking your mouse button on the “ Sound Manager ” icon located at the desk[...]

3-6 F-I90HD 3.7 ATi RAID Driver This program enab les the RAID function for [ SATA ] connectors. To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ ATi RAID Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation. 3.8 USB 2.0 Driver ※ There [...]

Driver & Utility F-I90HD 3-7 3.9 abit EQ The [ abit EQ ] is a sel f-diagnosti c system des igned to protect PC Hardware by monito ring critical items of Power Supply Voltage, CP U & System Fans Spee d, and CPU & System Temperature. To install this utility: 1. Click on the [ abit Utility ] tab in the installation menu screen. 2. Click th[...]

3-8 F-I90HD 3.10 FlashMenu (BIOS Update Utility) The [ FlashMenu ] is the most stable Windows-based BI OS flash available. No more worries about crashing. With one click of BIOS updating, users can flash their BIOS more easily and in less time. To install this utility: 1. Click on the [ abit Utility ] tab in the installation menu screen. 2. Click t[...]

Driver & Utility F-I90HD 3-9 3.11 SATA RAID Driver (for Windows Vista) The Raid Driver needed when installing Windows Vista op erating system is located at the following path of your CD-ROM d rive after placing the “Driver-&-Utility CD” into it: For Vista 32bit  CD-ROM Drive:Drivers SATARAIDATiVista32 For Vista 64bit  CD-ROM D[...]

3-10 F-I90HD[...]

Multilingual QIG F-I90HD 4-1 4. Multilingual Quick Installation Guide 4.1 Français//Guide d'Installation Rapide Ce “Guide d’Installation rapi de ” contient seulement l information de base dont vous pouvez avoir besoin lors de l’installation de vot re carte mèr e abit. Pour des opér ations plus avancées, vous devez vous reporter à [...]

4-2 F-I90HD 4.2 Deutsch//Kurze Installationsanleitung Diese “Kurze Installationsan leitung” enthält nur die grundlegenden H ardwareinfor mationen, die Sie zur Installation Ihre s abit-Motherboa rds benötigen. De tails finden Sie im aus führlichen Ha ndbuch. Vorsichtsm aßnahmen beim Einrichten der Hardware • Vor Installation des Motherboar[...]

Multilingual QIG F-I90HD 4-3 4.3 Italiano//Guida all’installazione rapida Questa “Guida a ll’installazione rapida” contie ne solamente le informazioni di b ase sull’hardware necessarie all’installazione della sche da madre abit. Fare rife rimento alla ver sione comple ta della guida pe r eseguire le operazioni avanzate. Precauzioni sull[...]

4-4 F-I90HD 4.4 Español//Guía rápida de instalación Esta “Guía de ins talación rá pida” contiene s olamente la informació n básica sob re el hardware q ue puede n ecesitar durante la instalación de la pl aca base abit. Para conocer el funcion amiento avanzad o, es necesario consultar l a versión comp leta. Precauciones durante la c o[...]

Multilingual QIG F-I90HD 4-5 4.5 Português//Guia de instalação rápida Este “Guia de in stalação rápi da” contém apen as informação essencial sobre o hardware e n ecessária à instalação d a sua placa pri ncipal ab it. Para mais informações, terá de consul tar a versão integral deste guia. Normas de segurança a ter em conta dur[...]

4-6 F-I90HD 4.6 Русский // Краткое руководство по установке В “ Кратком руководств е по установке ” содержится только основная информация о техническом обеспечении , которая вам может понадобиться[...]

Multilingual QIG F-I90HD 4-7 4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirp aigaldu sjuhend ” sisaldab ai nult abit-emaplaad i paigal damiseks vajalikku riistvaraalast põhiteavet. Edasijõudnud kasuta miseks tuleb teil ikkagi pöörduda täisversiooni poole. Ettevaatusabinõud riist vara paigaldamisel • Enne emaplaadi paigaldamist võ i üm[...]

4-8 F-I90HD 4.8 Latviski// Ā tr ā s instal ē šanas instrukcija Š ī “ Ā tr ā s instal ē šanas instrukci ja” ietver tikai pamata nor ā des iek ā rtai, kas nepi eciešamas, instal ē jot abit m ā tesplati. Piln ī g ā kai darb ī bai nepieci ešams ieg ū t instrukcij as paplašin ā to variantu. Piesardz ī bas pas ā kumi iek ā rt[...]

Multilingual QIG F-I90HD 4-9 4.9 Lietuvi ų //Trumpas instaliavimo vadovas Šiame “Trumpame in staliavimo vad ove” pateikta tik esmin ė informacija apie technin ę į rang ą , kurios jums gali prir eikti instaliuojant pagr indin ę plokšt ę abit. Pa pildom ų operaci j ų aprašym ą rasite piln oje vado vo versijoj e. Atsargum o priemon ė[...]

4-10 F-I90HD 4.10 Polski//Instrukcja szybkiej instalacji Ta “Instrukcja szyb kiej instal acji” zawiera tyl ko podstawowe inform acje dotyc z ą ce sprz ę tu, wymagane podczas insta lacji p ł yty g ł ównej abit. Przy zaawansowan ych operacjach , niezb ę dne b ę dzie skorzys tanie z komple tnej wersji ins trukcji. Ś rodki bezpiecze ń stwa[...]

Multilingual QIG F-I90HD 4-11 4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési ú tmutató” csak azt az alapvet ő hardver info rmációt tartalmazza, amel y az abit alap lap telepítéséhez szü kséges. Az el ő rehal adott üzemeltetéshez, továbbra is a teljes ú tmutatót kell h asználnia. Hardver beállítási óvinté[...]

4-12 F-I90HD 4.12 Türkçe//H ı zl ı Kurulum K ı lavuzu Bu “H ı zl ı Kurulum K ı lavuzu”, abit an akart ı n ı z ı takman ı zda gerekebilecek sadece temel donan ı m bilgisini içerme ktedir. İ leri i ş lemle r için daha ge ni ş olan tam ve rsiyonuna ba ş vurman ı z gerekecektir. Donan ı m Kurmada Al ı nacak Önl emler • Anak[...]

Multilingual QIG F-I90HD 4-13 4.13 ﺔﻴﺑﺮﻌﻟا ﺔﻐﻠﻟا // ﻊﻳﺮﺴﻟا ﺐﻴآﺮﺘﻟا ﻞﻴﻟد[...]

4-14 F-I90HD 4.14 ﯽﺳرﺎﻓ // ﻊﻳﺮﺳ ﺐﺼﻧ ﯼﺎﻤﻨهار[...]

Multilingual QIG F-I90HD 4-15 4.15 日本語 // クイックインストールガイド この「クイックインストールガイド」には、abit マ ザーボードを取り付けるときに必要となるハードウ ェアの基本情報のみが含まれています。詳細な操作 については、その完全版を参照してく?[...]

4-16 F-I90HD 4.16 한국어 / / 빠른 설치 가이드 본 “ 빠른 설치 가이드 ” 는 빅빔 abit 메인보드 설치에 필요한 중요한 하드웨어 정보만을 포함하고 있습니다 . 보다 상세한 정보 및 과정은 사용자 설명서를 참고하시기 바랍니다 . 하드웨어 설치시 주의사항 • 메인보드 [...]

Multilingual QIG F-I90HD 4-17 4.17 Bahasa Malaysia//Panduan Pemasangan Ringkas “Panduan Pemasangan Ringkas” ini hanya mengandungi maklumat perkakasan asas ya ng anda mungk in perlu semasa memasang papan induk abit anda. Untuk pengendalian la njutan, anda per lu rujuk ke v ersi lengkapn ya. Langkah Berj aga-jaga bag i Penyediaan Perkakasan • S[...]

4-18 F-I90HD 4.18 ไทย // คู่มื อการต ิ ดต ั้ งอย ่ างย ่อ ข้ อม ู ลทางเทคน ิ คของอ ุ ปกรณ ์ที่ ปราก ฎใน “ คู่มื อการ ติ ดต ั้ งอย ่ างย ่อ ” นี้ เป ็ นเพ ?[...]

Multilingual QIG F-I90HD 4-19 4.19 繁體中文 4.19.1 規格 處理器 • 支援 1066/800MHz 前端匯流排的 Intel 雙 核心 LGA775 處理器 • 支援 Intel Core 2 Extreme 、 Core 2 Quad 、 Core 2 Duo 、 Pentium EE 、 Pentium D 、 Pentium Dual Core 、以及 Pentium 4 的處理器 晶片組 • 北橋： ATI Radeon Xpress 1250 • 南?[...]

4-20 F-I90HD 4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 基本硬體資訊。詳細的操作方式，仍請參 閱其完整的 手冊版本。 硬體安裝注意事項 • 安裝機板或變換任何設定之前，請先關閉電源並拔 掉電源插頭。 • 從抗靜電袋中取出機板前?[...]

Multilingual QIG F-I90HD 4-21 4.20 简体中文 4.20.1 规格 处理器 • 支持 1066/800MHz 前端总线的 Intel 双核 心 LGA775 处理器 • 支持 Intel Core 2 Extreme 、 Core 2 Quad 、 Core 2 Duo 、 Pentium EE 、 Pentium D 、 Pentium Dual Core 、 以及 Pentium 4 的处 理器 芯片组 • 北桥： ATI Radeon Xpress 1250 • 南?[...]

4-22 F-I90HD 4.20.2 快速安装略说 本“快速安装略说”仅包含基本的硬件信 息，供您在 安装 abi t 主板时进行参考。如需了解高级操作，仍 请 参阅其完整的手册版本。 硬件设置㊟意事㊠ • 在安装主板或更改任何设置前，务必关闭电源并从 交流插座㆖拔掉电源线。 • [...]

Appendix F-I90HD 5-1 5. Appendix 5.1 Troubleshooting (How to Get Technical Support?) 5.1.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer system? A: Yes, we highly recommend that you clear the CMOS before installi ng a new motherboard. Please move the CMOS jumper from its default 1-2 position to [...]

5-2 F-I90HD Q: How to get a quick response for my request on technical support? A: Please carry out a simpl e troublesho oting before s ending “ Technical Support Form ”: System boot-up fails after the system had been assembled: Check the motherboard’s supp orting specifications first to see if all the key components attached in your system c[...]

Appendix F-I90HD 5-3 • Memory configuration: Type in the memory config uration in BIOS setting. Example: Memory Timing: 2.5- 3-3-7 @533MHz • Graphics information: Note Graphics c ard’s brand, model and driver v ersion • Graphics card: Type in the brand and mo del name of your graphi cs card. Example: ATI RADEON X850 XT PE • Graphics drive[...]

5-4 F-I90HD 5.1.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem descri ption:[...]

Appendix F-I90HD 5-5 5.1.3 Contact Information Taiwan Head Office Universal ABIT Co., Ltd. 6F, No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751- 3380 Fax: 886-2-8751-3381 Sales: sales@abit.com.tw Marketing: market@abit.com.tw North America, South America Universal ABIT (USA) Corporation 2901 Bayview Drive, Fremont, CA 94538, U.S.[...]

P/N: 4310-0000-83 Rev. 2.00 www.abit.com.tw Johnathan “Fatal1ty” Wendel[...]