Français dropdown-ico

Areca ARC-1231ML/1261ML/1280ML manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Areca ARC-1231ML/1261ML/1280ML. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Areca ARC-1231ML/1261ML/1280ML ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Areca ARC-1231ML/1261ML/1280ML décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation Areca ARC-1231ML/1261ML/1280ML devrait contenir:
- informations sur les caractéristiques techniques du dispositif Areca ARC-1231ML/1261ML/1280ML
- nom du fabricant et année de fabrication Areca ARC-1231ML/1261ML/1280ML
- instructions d'utilisation, de réglage et d’entretien de l'équipement Areca ARC-1231ML/1261ML/1280ML
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Areca ARC-1231ML/1261ML/1280ML ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Areca ARC-1231ML/1261ML/1280ML et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Areca en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Areca ARC-1231ML/1261ML/1280ML, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Areca ARC-1231ML/1261ML/1280ML, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Areca ARC-1231ML/1261ML/1280ML. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    ARC-1110/1120/1130/1160/1170 ( 4/8/12/16/24-port PCI- X SA T A RAID Controllers ) ARC-1110ML/1120ML/1130ML/1160ML ( 4/8-port Innband connector and 12/16-port Multi-lane connector PCI- X SA T A RAID Controllers ) ARC-1210/1220/1230/1260/1280 ( 4/8/12/16/24-port PCI-Express S A T A RAID Controllers ) ARC-1231ML/1261ML/1280ML (12/16/24-port PCI-Exp[...]

  • Page 2

    Microsoft WHQL Windows Hardware Compatibility Test ARECA is committed to submitting products to the Microsoft Windows Hardware Quality Labs (WHQL), which is required for participation in the Windows Logo Program. Successful passage of the WHQL tests results in both the “Designed for Windows” logo for qualifying ARECA PCI- X and PCI-Express SA T[...]

  • Page 3

    Contents 1. Introduction .............................................................. 10 1.1 Overview ....................................................................... 1 0 1.2 F eatures ........................................................................ 12 1.3 RAID Concept ...............................................................[...]

  • Page 4

    3.2 McBIOS Conguration manager ......................................... 5 7 3.3 Conguring Raid Sets and V olume Sets .............................. 5 8 3.4 Designating Drives as Hot Spares ...................................... 5 8 3.5 Using Quick V olume /Raid Setup Conguration .................... 5 9 3.6 Using RAID Set/V olume Set Func[...]

  • Page 5

    3.7.5.2 Alert Beeper Setting ............................................... 89 3.7.5.3 Change P assword .................................................. 89 3.7.5.4 JBOD/RAID Function .............................................. 9 0 3.7.5.5 Background T ask Priority ........................................ 91 3.7.5.6 Maximum SA T A Mode .......[...]

  • Page 6

    5.4 F or Solaris 10 x86 ......................................................... 116 5.5 F or Mac OS 10.x ........................................................... 116 5.6 ArcHttp Conguration .................................................... 117 6. Web Browser-based Conguration ......................... 121 6.1 Start-up McRAID Stor age [...]

  • Page 7

    • System Beeper Setting ................................................. 13 8 • Background T ask Priority ............................................... 13 8 • JBOD/RAID Conguration .............................................. 13 8 • Maximun SA T A Supported ............................................. 13 8 • HDD Read Ahead Cache [...]

  • Page 8

    Appendix C .................................................................. 159 SNMP Operation & Denition ................................................ 15 9 Appendix D .................................................................. 166 Event Notication Congur ations ........................................ 166 A. Device Event .[...]

  • Page 9

    [...]

  • Page 10

    INTRODUCTION 10 1. Introduction This section presents a brief overview of the S A T A RAID Series controller , ARC-1110/1110ML/1120/1120ML/1130/1130ML/1160/ 1160ML/1170 (4/8/12/16/24-port PCI- X SA T A RAID Controllers) and ARC-1210/1220/1230/1230/1231ML /1260/1261ML/1280/1280ML (4/8/12/16/24-port PCI-Express S A T A RAID Controllers). 1.1 Overview[...]

  • Page 11

    INTRODUCTION 11 chips, which can simultaneously communicate with the I/O proces - sor and read or write data on multiple drives. Unsurpassed Data Availability As storage capacit y requirements continue to rapidly increase, us - ers require greater levels of disk drive fault toler ance, which can be implemented without doubling the investment in dis[...]

  • Page 12

    INTRODUCTION 12 Linux, FreeBSD and more environments. This W eb browser-based RAID management utility allows both local and remote creation and modication RAID sets, volume sets, and monitoring of RAID status from standard web browsers. 1.2 Features Adapter Architecture • Intel IOP 331 I/O processor (ARC -11xx series) • Intel IOP 332/IOP 333[...]

  • Page 13

    INTRODUCTION 13 • Redundant ash image for adapter a vailabilit y • Support S.M.A.R.T , NCQ and OOB staggered spin-up capable drives Monitors/Notication • System status indication through LED/L CD connector , HDD activity/fault connector , and alarm buzzer • SMTP support for email notication • SNMP agent supports for remote SNMP M[...]

  • Page 14

    INTRODUCTION 14 PCI-X RAID Card Comparison (ARC-11XXML) 1110ML 1120ML 1130ML 1160ML RAID processor IOP331 Host Bus T ype PCI- X 133MHz RAID 6 support N/A YES YES YES Cache Memory 256MB 256MB One SODIMM One SODIMM Drive Support 4 * SA T A ll 8 * SA T A ll 12 * SA T A ll 16 * SA T A ll Disk Connector Innband Innband Multi-lane Multi-lane Intern[...]

  • Page 15

    INTRODUCTION 15 1.3 RAID Concept 1.3.1 RAID Set A RAID set is a group of disks connected to a RAID controller . A RAID set contains one or more volume sets. The RAID set itself does not dene the RAID level (0, 1, 1E, 3, 5, 6, etc); the RAID level is dened within each volume set. Therefore, v olume sets are contained within RAID sets and RAID [...]

  • Page 16

    INTRODUCTION 16 In the illustration, v olume 1 can be assigned a RAID level 5 of operation while v olume 0 might be assigned a RAID level 1E of operation. Alter antively , the free space can be used to create vol - ume 2, which could then be set to use RAID level 5. 1.3.3 Ease of Use Features 1.3.3.1 Foreground Availability/Background Initial- izat[...]

  • Page 17

    INTRODUCTION 17 mation or data on that RAID set. Therefore, if a server fails, the RAID set disk drives can be mov ed to another server with an Areca RAID controller and the disks can be inserted in any order . 1.3.3.3 Online Capacity Expansion Online Capacity Expansion makes it possible to add one or more physical drives to a v olume set without i[...]

  • Page 18

    INTRODUCTION 18 The SA T A RAID controller redistributes the original volume set over the original and newly added disks, using the same fault - tolerance congur ation. The unused capacity on the expand RAID set can then be used to create an additional volume set, with a different fault tolerance setting (if required b y the user .) The SA T A R[...]

  • Page 19

    INTRODUCTION 19 1.3.3.4 Online RAID Level and Stripe Size Migration For those who wish to later upgr ade to any RAID capabilities, a system with Areca online RAID level/stripe size migr ation allows a simplied upgrade to an y supported RAID level without having to reinstall the operating system. The SA T A RAID controllers can migrate both the R[...]

  • Page 20

    INTRODUCTION 20 transparently while the v olumes are online, but, at the end of the process, the operating system will detect free space at after the existing volume. Windows, NetW are and other advanced operating systems sup - port volume expansion, which enables you to incorpor ate the additional free space within the volume into the oper ating s[...]

  • Page 21

    INTRODUCTION 21 global hot spare disk drive. T o effectively use the global hot spare feature, you must alwa ys maintain at least one drive that is marked as a global spare. Important : The hot spare must have at least the same capacit y as the drive it replaces. 1.4.2 Hot-Swap Disk Drive Support The SA T A controller chip includes a protection cir[...]

  • Page 22

    INTRODUCTION 22 1.4.4 Auto Rebuilding If a hot spare is av ailable, the rebuild starts automatically when a drive fails. The SA T A RAID controllers automatically and trans - parently rebuild failed drives in the background at user -denable rebuild rates. If a hot spare is not av ailable, the failed disk drive must be re - placed with a new disk[...]

  • Page 23

    INTRODUCTION 23 1.5 High Reliability 1.5.1 Hard Drive Failure Prediction In an effort to help users avoid data loss, disk manufacturers are now incorporating logic into their driv es that acts as an "early warning system" for pending drive problems. This system is called S.M.A.R.T . The disk integr ated controller works with multiple sens[...]

  • Page 24

    INTRODUCTION 24 runs as a background task. Auto R eassign Sector discontinues when the operating system mak es a request. 1.5.3 Consistency Check A consistency check is a process that veries the integrity of redundant data. F or example, performing a consistency check of a mirrored drive assures that the data on both driv es of the mirrored pair[...]

  • Page 25

    INTRODUCTION 25 1.6.2 RECOVERY ROM The SA T A RAID controller rmware is stored on the ash ROM and is executed by the I/O processor . The rmw are can also be updat - ed through the PCI- X/PCIe bus port or Ethernet port (if equipped) without the need to replace any hardware chips. During the con - troller rmware upgr ade ash process, i[...]

  • Page 26

    INTRODUCTION 26 simultaneously; the reliability of RAID Level 0 is less because the entire arra y will fail if any one disk drive fails, due to a lack of redundancy . 1.7.2 RAID 1 RAID 1 is also known as “disk mirroring”; data written to one disk drive is simultaneously written to another disk drive. R ead per - formance may be enhanced if the [...]

  • Page 27

    INTRODUCTION 27 1.7.3 RAID 1E RAID 1E is a combination of RAID 0 and RAID 1, combing strip - ping with disk mirroring. RAID Level 1E combines the fast per - formance of Level 0 with the data redundancy of Lev e1 1. In this conguration, data is distributed across sev eral disk drives, similar to Level 0, which are then duplicated to another set o[...]

  • Page 28

    INTRODUCTION 28 1.7.5 RAID 5 RAID 5 is sometimes called striping with parity at byte level. In RAID 5, the parity information is written to all of the drives in the controllers rather than being concentr ated on a dedicated parity disk. If one drive in the system fails, the parity information can be used to reconstruct the data from that drive. All[...]

  • Page 29

    INTRODUCTION 29 1.7.6 RAID 6 RAID 6 provides the highest reliability , but is not yet widely used. It is similar to RAID 5, but it performs two different parity com - putations or the same computation on overlapping subsets of the data. RAID 6 can offer fault toler ance greater than RAID 1 or RAID 5 but only consumes the capacity of 2 disk drives f[...]

  • Page 30

    INTRODUCTION 30 1 Also known as mirroring All data replicated on N sepa - rated disks. N is almost always 2. This is a high availabilit y solu - tion, but due to the 100% duplication, it is also a costly solution. Half of drive capacity in array dev oted to mirroring. 2 Lower than RAID 6; Higher than RAID 3, 5 Reads are higher than a single disk; W[...]

  • Page 31

    INTRODUCTION 31 6 RAID 6 provides the highest reliability . Similar to RAID 5, but does two different parity com - putations. RAID 6 offers fault tolerance greater that RAID 1 or RAID 5. Parity data consumes the capacity of 2 disk drives. 4 highest reliabil - ity Reads are similar to RAID 0; Writes are slower than a single disk Reads are similar to[...]

  • Page 32

    HARDWARE INSTALLATION 32 2. Hardware Installation This section describes the procedures for installing the SA T A RAID con - trollers. 2.1 Before Your begin Installation Thanks for purchasing the SA T A RAID Controller as your RAID data storage and management system. This user guide giv es simple step-by-step instructions for installing and cong[...]

  • Page 33

    HARDWARE INSTALLATION 33 2.2 Board Layout Follow the instructions below to install a PCI RAID Card into y our PC / Server . Figure 2-1, ARC -1110/1120 (4/8-port PCI- X SA T A RAID Controller) Figure 2-2, ARC -1210/1220 (4/8-port PCI-Express SA T A RAID Con - troller)[...]

  • Page 34

    HARDWARE INSTALLATION 34 Figure 2-3, ARC -1110ML/1120ML (4/8-port PCI- X SA T A RAID Con - troller) Figure 2-4, ARC -1210ML/1220ML (4-port PCI Express SAS RAID Controller)[...]

  • Page 35

    HARDWARE INSTALLATION 35 Figure 2-6, ARC -1130ML/1160ML (12/16-port PCI- X SA T A RAID Controller) Figure 2-5, ARC -1130/1160 (12/16-port PCI- X SA T A RAID Control - ler)[...]

  • Page 36

    HARDWARE INSTALLATION 36 Figure 2-7, ARC -1230/1260 (12/16-port PCI-EXpress SA T A RAID Controller) Figure 2-8, ARC -1170 (24-port PCI- X SA T A RAID Controller)[...]

  • Page 37

    HARDWARE INSTALLATION 37 Figure 2-9, ARC -1280 (24-port PCI-Express SA T A RAID Controller) Figure 2-10, ARC -1231ML/1261ML/1280ML (12/16/24-port PCI-Ex - press SA T A RAID Controller)[...]

  • Page 38

    HARDWARE INSTALLATION 38 Tools Required An ESD grounding str ap or mat is required. Also required are stan - dard hand tools to open your system’ s case. System Requirement The controller can be installed in a universal PCI slot and requires a motherboard that: ARC-11xx series required one of the following: • Complies with the PCI Revision 2.3 [...]

  • Page 39

    HARDWARE INSTALLATION 39 Warning: High voltages may be found inside computer equipment. Be - fore installing any of the hardware in this package or remo v - ing the protective cov ers of any computer equipment, turn off power switches and disconnect power cords. Do not re - connect the power cords until you hav e replaced the covers. electricity . [...]

  • Page 40

    HARDWARE INSTALLATION 40 Step 3. Install the PCI RAID Cards T o install the SA T A RAID controller remove the mounting screw and existing brack et from the rear panel behind the selected PCI slot. Align the gold-ngered edge on the card with the selected PCI expansion slot. Press down gently but rmly to ensure that the card is properly seated [...]

  • Page 41

    HARDWARE INSTALLATION 41 Step 5 Connect the SATA cable Model ARC -11XX and ARC-12XX controllers ha ve dual-layer S A T A internal connectors. If you hav e not already connected your SA T A cables, use the cables included with your kit to connect the control - ler to the SA T A hard drives. The cable connectors are all identical, so it does not matt[...]

  • Page 42

    HARDWARE INSTALLATION 42 Step 5-3. Connect the Min SAS 4i to 4*SATA cable Model ARC -1231ML/1261ML/1280ML have Min SA S 4i (SFF-8087) internal connectors, each of them can support up to four SA T A drives. These adapters can be installed in a server RAID enclosure with a standard SA T A connector backplane. Min SAS 4i to SA T A cables are included [...]

  • Page 43

    HARDWARE INSTALLATION 43 For Sideband cable signal Please refer to page 51 for SGPIO bus. Step 5-4. Connect the Min SAS 4i to Multi-lance cable Model ARC -1231ML/1261ML/1280ML have Min SA S 4i internal connectors, e ach of them c an support up to four SA T A drives . These controllers can be installed in a server RAID enclosure with a Multi- lance [...]

  • Page 44

    HARDWARE INSTALLATION 44 Step 5-5. Connect the Min SAS 4i to Min SAS 4i cable Model ARC-1230ML/1260ML/1280ML have Min SAS 4i internal connectors, each of them can support up to four SA T A drives. These adapters can be installed in a server RAID enclosure with a Min SAS 4i internal connector backplane. Min SAS 4i cables are not included in the ARC [...]

  • Page 45

    HARDWARE INSTALLATION 45 The intelligent LED controller outputs a low-level pulse to deter - mine if status LEDs are attached to pin sets 1 and 2. This allows automatic controller conguration of the LED output. If the logi - cal level is different between the st 2 sets of the HDD LED header (LED attached to Set 1 but not Set 2), the controlle[...]

  • Page 46

    HARDWARE INSTALLATION 46 Figure 2-19, ARC - 1130/1160/1230/1260 global LED connection for Computer Case. Figure 2-21, ARC -1280 global LED connection for Computer Case. Figure 2-20, ARC -1170 global LED connection for Computer Case.[...]

  • Page 47

    HARDWARE INSTALLATION 47 Figure 2-22, ARC -1231ML/ 1261ML/1280ML global LED connection for Computer Case. B: Individual LED indicator connector Connect the cables for the drive activity LEDs and fault LEDs be - tween the backplane of the cage and the respective connector on the SA T A RAID controller . The following describes the fault/activ - ity [...]

  • Page 48

    HARDWARE INSTALLATION 48 Figure 2-23, ARC - 1110/1120/1210/1220 Individual LED indica - tors connector , for each channel drive. Figure 2-24, ARC - 1130/1160/1230/1260 Individual LED indica - tors connector , for each channel drive. Figure 2-25, ARC -1170 Individual LED indicators connector , for each chan - nel drive.[...]

  • Page 49

    HARDWARE INSTALLATION 49 Figure 2-26, ARC -1280 Individual LED indicators connector , for each chan - nel drive. Figure 2-27, ARC -1231ML/ 1261ML/1280ML Individual LED indicators connector , for each channel drive. C: I 2 C Connector Y ou can also connect the I 2 C interface to a proprietary SA T A backplane enclosure. This can reduce the number of[...]

  • Page 50

    HARDWARE INSTALLATION 50 Figure 2-28, Activity/F ault LED I 2 C connector connected between SA T A RAID Controller & SA T A HDD Cage backplane. Figure 2-29, Activity/F ault LED I 2 C connector connected between SA T A RAID Controller & 4 SA T A HDD backplane. Note: Ci-Design has supported this feature in its 4-port 12-6336- 05A SA T A ll ba[...]

  • Page 51

    HARDWARE INSTALLATION 51 PIN Description PIN Description 1 power (+5V) 2 GND 3 LCD Module Interrupt 4 F ault/Activity Interrupt 5 LCD Module Serial Data 6 F ault/Activity clock 7 F ault/Activity Serial Data 8 LCD Module clock D: SGPIO bus The preferred I/O connector for server backplanes is the Min S AS 4i internal serial-attachment connector . Thi[...]

  • Page 52

    HARDWARE INSTALLATION 52 The following signal denes the sideband connector which can work with Areca sideband cable. The sideband header is located at backplane. F or SGPIO to work properly , please connect Areca 8-pin sideband cable to the sideband header as shown above. See the table for pin denitions. Step 7. Re-check the SATA HDD LED and [...]

  • Page 53

    HARDWARE INSTALLATION 53 Step 10. Install the controller driver F or a new system: • Driver installation usually takes places as part of oper ating sys - tem installation. Please reference the Chapter 4 Diver Installation for the detail installation procedure. In an existing system: • Install the controller driver into the existing oper ating s[...]

  • Page 54

    HARDWARE INSTALLATION 54 Summary of the installation The ow chart below describes the installation procedures for SA T A RAID controller . These procedures include hardware installa - tion, the creation and conguration of a RAID v olume through the McBIOS, OS installation and installation of SA T A RAID controller software. The software compo[...]

  • Page 55

    HARDWARE INSTALLATION 55 SNMP Manager Console Integration • Out of Band-Using Ethernet port (12/16/24-port Control- ler) Before launching the rmware-embedded SNMP agent in the sever , you need rst to enable the rew are-embedded SNMP agent function on your SA T A RAID controller . If you need additional information about installation and [...]

  • Page 56

    BIOS CONFIGURATION 56 3. McBIOS RAID Manager The system mainboard BIOS automatically congures the following SA T A RAID controller parameters at power-up: • I/O P ort Address • Interrupt channel (IRQ) • Adapter ROM Base Address Use McBIOS to further congure the SA T A RAID controller to suit your server hardware and oper ating system. 3[...]

  • Page 57

    BIOS CONFIGURATION 57 Areca T echnology Corporation RAID Controller Setup <V1.0, 2004/05/20> ArrowKey Or AZ:Move Cursor , Enter: Select, ** Select & Press F10 to Reboot** Select An Adapter T o Congure ( 3/14/ 0)I/O=DD200000h, IRQ = 9 Use the Up and Down arrow keys to select the adapter y ou want to congure. While the desired adapter[...]

  • Page 58

    BIOS CONFIGURATION 58 3.4 Designating Drives as Hot Spares Any unused disk drive that is not part of a RAID set can be desig - nated as a Hot Spare. The “Quick V olume/Raid Setup” conguration will add the spare disk drive and automatically display the appro - priate raid lev el from which the user can select. For the “R aid Set Function co[...]

  • Page 59

    BIOS CONFIGURATION 59 3.5 Using Quick Volume /Raid Setup Con- guration Quick V olume / Raid Setup Conguration collects all a vailable drives and includes them in a RAID set. The RAID set y ou create is associated with exactly one volume set. Y ou will only be able to modify the default RAID level, the stripe siz e, and the capacity of the new[...]

  • Page 60

    BIOS CONFIGURATION 60 3.6 Using RAID Set/Volume Set Function Method In “Raid Set Function” , you can use the “Create Raid Set Function” to generate a new RAID set. In “V olume Set Function” , you can use the “Create V olume Set function” to generate an associated volume set and and congur ation parameters. If the current controll[...]

  • Page 61

    BIOS CONFIGURATION 61 Step Action 1 T o setup the Hot Spare (option), choose RAID Set Function from the main menu. Select the Create Hot Spare and press the Enter key to dene the Hot Spare. 2 Choose RAID Set Function from the main menu. Select Create RAID Set and press the Enter key . 3 The “Select a Drive For R aid Set” window is displayed [...]

  • Page 62

    BIOS CONFIGURATION 62 3.7 Main Menu The main menu shows all functions that are av ailable for executing actions, which is accomplished by clicking on the appropriate link. Note: A user can use this method to examine the existing congura - tion. The “modify volume set congur ation” method provides the same functions as the “create volume[...]

  • Page 63

    BIOS CONFIGURATION 63 This password option allows user to set or clear the raid controller’ s password protection feature. Once the password has been set, the user can only monitor and congure the r aid controller by providing the correct password. The password is used to protect the internal RAID controller from unauthorized entry . The contr[...]

  • Page 64

    BIOS CONFIGURATION 64 Set. Select “ Quick Volume/RAID Setup” from the main menu; all possible RAID level will be display ed on the screen. If volume capacity will ex ceed 2TB, controller will show the “Greater 2 TB volume Support” sub-menu. Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor [...]

  • Page 65

    BIOS CONFIGURATION 65 Stripe size This parameter sets the siz e of the stripe written to each disk in a RAID 0, 1, 5, or 6 logical drive. Y ou can set the stripe size to 4 KB, 8 KB , 16 KB, 32 KB, 64 KB , or 128 KB. A larger stripe size produces better-read performance, especially if your computer does mostly sequential reads. However , if y ou A s[...]

  • Page 66

    BIOS CONFIGURATION 66 3.7.2 Raid Set Function Manual Conguration giv es complete control of the RAID set set - ting, but it will take longer to congure than “Quick V olume/Raid Setup” conguration. Select “R aid Set Function” to manually con - gure the raid set for the rst time or delete existing RAID sets and recongure the[...]

  • Page 67

    BIOS CONFIGURATION 67 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup V olume Set Function Physical Drives Raid System Function Ethernet Conguration View Syste[...]

  • Page 68

    BIOS CONFIGURATION 68 4. An “Edit The Raid Set Name” dialog bo x appears. Enter 1 to 15 alphanumeric characters to dene a unique identier for the RAID Set. The default RAID set name will always appear as R aid Set. #. 3.7.2.2 Delete Raid Set T o completely erase and recongure a RAID set, y ou must rst delete it and re-create the rai[...]

  • Page 69

    BIOS CONFIGURATION 69 disk drives, the “Expand R aid Set” function allows the users to add disk drives to the RAID set that hav e already been created. T o expand a raid set: Select the “Expand Raid Set” option. If there is an a vailable disk, then the “Select SA T A Drives For R aid Set Expansion” screen appears. Select the target RAID[...]

  • Page 70

    BIOS CONFIGURATION 70 Migration occurs when a disk is added to a RAID set. Migr ation status is displayed in the r aid status area of the R aid set infor - mation screen when a disk is being added to a R aid set. Migrat - ing status is also displayed in the associated v olume status area of the V olume Set Information when a disk is added to a RAID[...]

  • Page 71

    BIOS CONFIGURATION 71 3.7.2.5 Create Hot Spare When you choose the “Create Hot Spare” option in the R aid Set Function, all unused physical devices connected to the current controller will result in the following: Select the target disk by clicking on the appropriate check box. Press the Enter key to select a disk drive and press Yes in the “[...]

  • Page 72

    BIOS CONFIGURATION 72 3.7.2.7 Raid Set Information T o display Raid Set information, mo ve the cursor bar to the de - sired RAID set number , then press the Enter key . The “Raid Set Information” will display . Y ou can only view information for the RAID set in this screen. 3.7.3 Volume Set Function Controller I/O Port:F3000000h, F2: Select Con[...]

  • Page 73

    BIOS CONFIGURATION 73 volume sets will reside on all physical disks in the RAID set. Thus each volume set on the RAID set will hav e its data spread evenly across all the disks in the RAID set rather than one v olume set using some of the av ailable disks and another volume set using other disks. 3.7.3.1 Create Volume Set 1. V olume sets of differe[...]

  • Page 74

    BIOS CONFIGURATION 74 5. After completing the modication of the volume set, press the Esc key to conrm it. An “Initialization” screen is presented. • Select F oreground (F aster Completion) for F aster Initializa - tion of the selected volume set. • Select Background (Instant A vailable) for Normal Initializa - tion of the selected vo[...]

  • Page 75

    BIOS CONFIGURATION 75 The default volume name will alwa ys appear as V olume Set #. Y ou can rename the volume set providing it does not ex ceed the 15 characters limit. • Raid Level • Volume Name Set the RAID level for the volume set. Highlight R aid Level and press < Enter >. The av ailable RAID levels for the current volume set are dis[...]

  • Page 76

    BIOS CONFIGURATION 76 The maximum av ailable volume size is the default v alue for the rst setting. Enter the appropriate volume size to t y our ap - plication. The capacity v alue can be increased or decreased by the UP and DOWN arrow keys. The capacity of each v olume set must be less than or equal to the total capacity of the RAID set on w[...]

  • Page 77

    BIOS CONFIGURATION 77 • Strip Size This parameter sets the siz e of the segment written to each disk in a RAID 0, 1, 5, or 6 logical drive. Y ou can set the stripe size to 4 KB, 8 KB , 16 KB, 32 KB, 64 KB , or 128 KB. Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape,[...]

  • Page 78

    BIOS CONFIGURATION 78 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 79

    BIOS CONFIGURATION 79 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 80

    BIOS CONFIGURATION 80 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 81

    BIOS CONFIGURATION 81 3.7.3.3 Modify Volume Set Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System[...]

  • Page 82

    BIOS CONFIGURATION 82 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 83

    BIOS CONFIGURATION 83 • Volume Set Migration Migrating occurs when a v olume set is migrating from one RAID level to another , when a volume set strip siz e changes, or when a disk is added to a RAID set. Migration status is displa yed in the volume status area of the “V olume Set Information” screen when moving from one RAID level to another[...]

  • Page 84

    BIOS CONFIGURATION 84 3.7.3.6 Display Volume Set Info. T o display volume set information, mov e the cursor bar to the desired volume set number and then press the Enter k ey . The “V olume Set Information” will be shown. Y ou can only view the information of this volume set in this screen, not modify it. Controller I/O Port:F3000000h, F2: Sele[...]

  • Page 85

    BIOS CONFIGURATION 85 3.7.4 Physical Drives Choose this option from the Main Menu to select a physical disk and perform the operations listed abo ve. 3.7.4.1 View Drive Information Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnol[...]

  • Page 86

    BIOS CONFIGURATION 86 When you choose this option, the physical disks connected to the SA T A RAID controller are listed. Move the cursor to the de - sired drive and press Enter to view drive information. 3.7.4.2 Create Pass-Through Disk A Pass- Through Disk is not controlled by the SA T A RAID con - troller rmware and thus cannot be a part of a[...]

  • Page 87

    BIOS CONFIGURATION 87 3.7.4.4 Delete Pass-Through Disk T o delete a Pass-through driv e from the P ass-through drive pool, move the cursor bar to the “Ph ysical Drive Function” menu and select the “Delete P ass- Through Drive” item, then press the Enter key . The “Delete Pass- Through conrmation” screen will appear; select Yes to del[...]

  • Page 88

    BIOS CONFIGURATION 88 3.7.5 Raid System Function T o set the raid system function, mo ve the cursor bar to the main menu and select the “Raid S ystem Function” item and then press Enter key . The “Raid S ystem Function” menu will show multiple items. Move the cursor bar to an item, then press Enter key to select the desired function. 3.7.5.[...]

  • Page 89

    BIOS CONFIGURATION 89 3.7.5.2 Alert Beeper Setting The “ Alert Beeper Setting” item is used to Disabled or Enable the SA T A RAID controller alarm tone generator . Select “Disabled” and press the Enter key in the dialog box to turn the beeper off . 3.7.5.3 Change Password The manufacture default password is set to 0000. The password option [...]

  • Page 90

    BIOS CONFIGURATION 90 rect password. This feature is used to protect the internal RAID system from unauthorized access. The controller will check the password only when entering the Main menu from the initial screen. The system will automatically go back to the initial screen if it does not receive any command in 20 seconds. T o set or change the p[...]

  • Page 91

    BIOS CONFIGURATION 91 3.7.5.5 Background Task Priority The “ Background Task Priority ” is a relative indication of how much time the controller devotes to a rebuild oper ation. The SA T A RAID controller allows the user to choose the rebuild prior - ity (ultralow , low, normal, high) to balance v olume set access and rebuild tasks appropriatel[...]

  • Page 92

    BIOS CONFIGURATION 92 be dynamically rescheduled or re-ordered, along with the neces - sary tracking mechanisms for outstanding and completed por - tions of the workload. The SA T A RAID controller allows the user to choose the SA T A Mode: SA T A150, SA T A150+NCQ, S A T A300, SA T A300+NCQ. 3.7.5.7 HDD Read Ahead Cache Allow Read Ahead (Default: [...]

  • Page 93

    BIOS CONFIGURATION 93 3.7.5.9 Empty HDD slot HDD From firmware version 1.39 date: 04/01/2006 and later , the rmware has added the "Empty HDD Slot LED" option to setup the F ailed LED light "ON "or "OFF". When each slot has a power LED for the HDD installed i dentify , user can set this option to "OFF". Cho[...]

  • Page 94

    BIOS CONFIGURATION 94 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 95

    BIOS CONFIGURATION 95 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 96

    BIOS CONFIGURATION 96 ity of a drive that is used in redundant units. The controller provides three truncation modes in the system congur ation: Multiples Of 10G, Multiples Of 1G, and No T runcation. Multiples Of 10G: If you hav e 120 GB drives from different vendors; chances are that the capacity v aries slightly . For exam - ple, one drive mig[...]

  • Page 97

    BIOS CONFIGURATION 97 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 98

    BIOS CONFIGURATION 98 congure the IP address of the controller , move the cursor bar to the Main menu “Ethernet Conguration Function” item and then press the Enter key . The “Ethernet Conguration” menu appears on the screen. Move the cursor bar to DHCP Function item, then press Enter key to show the DHCP setting. Select the “Disa[...]

  • Page 99

    BIOS CONFIGURATION 99 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Cong[...]

  • Page 100

    BIOS CONFIGURATION 100 Choose this option to view the system events information: Timer , Device, Event type, Elapsed Time, and Errors. The RAID system does not have a real time clock. The Time information is the rela - tive time from the SA T A RAID controller powered on. 3.7.8 Clear Events Buffer Use this feature to clear the entire events buffer [...]

  • Page 101

    BIOS CONFIGURATION 101 Controller I/O Port:F3000000h, F2: Select Controller , F10: Reboot System ArrowKey Or AZ:Move Cursor , Enter: Select, ESC: Escape, L:Line Draw , X: Redraw Areca T echnology Corporation RAID Controller Main Menu Quick V olume/Raid Setup Raid Set Function V olume Set Function Physical Drives Raid System Function Ethernet Con[...]

  • Page 102

    DRIVER INSTALLATION 102 4. Driver Installation This chapter describes how to install the SA T A RAID controller driver to your oper ating system. The installation procedures use the following terminology: Installing operating system on the SATA Volume If you hav e a new drive conguration without an oper ating system and want to install oper atin[...]

  • Page 103

    DRIVER INSTALLATION 103 The following steps are required to create the driver disk ettes: 1. The computer system BIOS must be set to boot -up from the CD- ROM. 2. Insert the SA T A Controller Driver CD disc into the CD-ROM drive. 3. The system will boot-up from CD-ROM Driv e; to create the driv - er diskettes, select the “ SATA RAID controller Dr[...]

  • Page 104

    DRIVER INSTALLATION 104 The Storport driver is new to Windows Server 2003. Storport im - plements a new architecture designed for better performance with RAID systems and in Storage Area Network (S AN) environments. Storport delivers higher I/O throughput, enhanced manageability , and an improved miniport interface. Storport better utiliz es faster[...]

  • Page 105

    DRIVER INSTALLATION 105 4. Press F6 as soon as the Windows screen shows ” Setup is inspecting your Computer’s hardware Conguration ” . A message stating “ Press F6 to specify thrid-party RAID con- troller ” will display during this time. This must be done or else the Windows installer will not prompt for the driver for from the SA T A [...]

  • Page 106

    DRIVER INSTALLATION 106 Continue with the following steps to make any additional v olume sets or pass-through disks accessible to Windows. This proce - dure assumes that the SA T A RAID controller hardware, driver , and Windows are installed and operational in y our system. 1. Partition and format the new v olume set or disks using Disk Administrat[...]

  • Page 107

    DRIVER INSTALLATION 107 which guides you in installing the SA T A RAID driver . 4. The “ Upgrade Device Driver Wizard ” will pop-up and provide a choice of how to proceed. Choose “ Display a list of known drivers for this device, so that you can choose a specic driver. ” and click on Next . 5. When the next screen queries the user about [...]

  • Page 108

    DRIVER INSTALLATION 108 procedure assumes that the SA T A RAID controller hardware, driver , and Windows are installed and operational in your sys - tem. 1. Partition and format the new arr ays or disks using Disk Ad - ministrator: a. Choose Administrativ e T ools from the Start menu. b. Choose Computer Management from the Administr ative T ools me[...]

  • Page 109

    DRIVER INSTALLATION 109 4.3 Driver Installation for Linux This chapter describes how to install the SA T A RAID controller driver to R ed Hat Linux, and SuSE Linux. Before installing the SA T A RAID driver to the Linux, complete the following actions: 1. Install and congure the controller and hard disk drives accord - ing to the instructions in [...]

  • Page 110

    DRIVER INSTALLATION 110 utility to create the r aid set and volume set. F or details, see Chap - ter 3, McBIOS RAID Manager . The supplied CD-ROM that came with the SA T A RAID controller includes compiled and tested drivers for FreeBSD 4.x (4.2 and on - wards) and 5.x (5.2 and onw ards). T o check if a more current ver - sion driver is av ailable,[...]

  • Page 111

    DRIVER INSTALLATION 111 4.7 Driver Installation for UnixWare 7.1.4 Please refer to the “readme.txt” le on the software CD-ROM or a manual from website: http://www .areca.com.tw 4.8 Driver Installation for NetWare 6.5 Please refer to the “readme.txt” le on the software CD-ROM or a manual from website: http://www .areca.com.tw[...]

  • Page 112

    ARCHTTP PROXY SERVER INSTALLATION 112 5. ArcHttp Proxy Server Installation Overview After hardware installation, the S A T A disk drives connected to the S A T A RAID controller must be congured and the volume set units initialized before they are ready to use. The user interface for these tasks can be accessed through the built -in congurati[...]

  • Page 113

    113 ARCHTTP PROXY SERVER INSTALLATION 5.1 For Windows Y ou must have administr ative level permissions to install S A T A RAID software. This procedure assumes that the S A T A RAID hard - ware and Windows are installed and oper ational in your system. Screen captures in this section are taken from a Windows XP instal - lation. If you are running a[...]

  • Page 114

    ARCHTTP PROXY SERVER INSTALLATION 114 5.2 For Linux Y ou must have administr ative level permissions to install S A T A RAID software. This procedure assumes that the S A T A RAID hard - ware and Linux are installed and oper ational in your system. The following details the Linux installation procedure of the SA T A RAID controller software. 1. Ins[...]

  • Page 115

    115 ARCHTTP PROXY SERVER INSTALLATION Usage: ./archttp32 (TCP_POR T) or ./archttp64 (TCP_POR T). It depends on your OS version. Par ameters: T CP_PORT v alue= 1~65535 (If T CP_PORT assigned, Archttp will start from this port. Otherwise, it will use the setting in archttpsrv .conf ) 4. Runing the ArcHttp le then ArcHttp screen appears. Copyright [...]

  • Page 116

    ARCHTTP PROXY SERVER INSTALLATION 116 5.4 For Solaris 10 x86 Y ou must have administr ative level permissions to install S A T A RAID software. This procedure assumes that the S A T A RAID hardware and FreeBSD are installed and oper ational in your system. The following details Solaris installation procedure of the SA T A RAID controller software. [...]

  • Page 117

    117 ARCHTTP PROXY SERVER INSTALLATION (1).Run the archttp64 using T erminal.app by using the following command: Usage: sudo ./archttp64 (TCP_POR T). Par ameters: T CP_PORT v alue= 1~65535 (If T CP_PORT assigned, Archttp will start from this port. Otherwise, it will use the setting in the archttpsrv .conf or default 81). This is the port address ass[...]

  • Page 118

    ARCHTTP PROXY SERVER INSTALLATION 118 The ArcHttp conguration starts. • General Conguration Binding IP 0.0.0.0: Y ou can choose either local adminstration or remote adminstration to connect web browser . Binding IP 127.0.0.1: Using local adminstration to connect web browser . Binding IP 192.166.0.44: Using remote adminstration to connect we[...]

  • Page 119

    119 ARCHTTP PROXY SERVER INSTALLATION Ex: RaidController_1@areca.com.tw Account: enter the valid account if y our SMTP mail server need au - thentication. Password: enter the v alid password if your SMTP mail server need authentication. MailT o Name: enter the alert receiver name that will be shown in the outgoing mail. Mail Address: enter the aler[...]

  • Page 120

    ARCHTTP PROXY SERVER INSTALLATION 120 Note: Event Notication T able refer to Appendix D. After you conrm and submit congur ations, you can use Generate T est Event feature to make sure these settings are correct. Congure Conguration and submit. After ArcHttp congur ations have successfully submitted, the Archttp console restarts a[...]

  • Page 121

    121 WEB BROWSER-BASED CONFIGURATION 6. Web Browser-based Conguration Before using the McRAID rmware-based browser utilit y , do the ini - tial setup and installation of this product. If you need to boot up the operating system from a RAID v olume set, you must rst create a RAID volume by using McBIOS RAID Storage Manager . Please refer to [...]

  • Page 122

    WEB BROWSER-BASED CONFIGURATION 122 and a supported browser . A locally managed system requires all of the following components: • A supported W eb browser , which should already be installed on the system. • Install ArcHttp proxy server on the S A T A RAID system. (R efer to Chapter 5, Archttp Proxy Serv er Installation ) • Remote and manage[...]

  • Page 123

    123 WEB BROWSER-BASED CONFIGURATION The “Enter Network P assword” dialog screen appears, type the User Name and P assword. The RAID subsystem controller de - fault User Name is “ admin ” and the P assword is “ 0000 ” . After entering the user name and password, press Enter to access the McRAID Storage Manager . Areca now offers an alter[...]

  • Page 124

    WEB BROWSER-BASED CONFIGURATION 124 6.2 SATA RAID controller McRAID Storage Manager The McRAID Storage Manager current congur ation screen displays the current conguration of y our SA T A RAID controller . It displays the Raid Set List, V olume Set List, and Physical Disk List. The r aid set information, volume set information, and drive info[...]

  • Page 125

    125 WEB BROWSER-BASED CONFIGURATION T o display raid set information, mo ve the mouse cursor to the desired raid set number , then click it. The raid set Information will display . T o display volume set information, move the mouse cur - sor to the desired V olume Set number , then click it. The volume set Information will display . T o display dri[...]

  • Page 126

    WEB BROWSER-BASED CONFIGURATION 126 The number of physical drives in the S A T A RAID controller deter - mines the RAID levels that can be implemented with the RAID set. Y ou can create a raid set associated with exactly one v olume set. The user can change the RAID level, stripe size, and capacit y . A hot spare option is also created depending up[...]

  • Page 127

    127 WEB BROWSER-BASED CONFIGURATION The Drive F or RAID Set” screen is displayed showing the drive(s) connected to the current controller . Click on the selected physi - cal drives within the current r aid set. Enter 1 to 15 alphanumeric characters to dene a unique identier for a r aid set. The default raid set name will alw ays appear as ?[...]

  • Page 128

    WEB BROWSER-BASED CONFIGURATION 128 6.5.3 Expand Raid Set Use this option to expand a RAID set when a disk is added to your system. This function becomes active when at least one driv e is av ailable. T o expand a raid set, click on the “Expand R aid Set” link. Select the target RAID set to be expanded. Click the av ailable disk and the “Con?[...]

  • Page 129

    129 WEB BROWSER-BASED CONFIGURATION T o activate the incomplete the RAID set, click on the “ Activate Raid Set” link. A “Select The RAID SET T o Activate” screen is displayed showing all r aid sets existing on the current controller . Click the RAID set number to activate in the select column. Click on the “Submit” button on the screen [...]

  • Page 130

    WEB BROWSER-BASED CONFIGURATION 130 The “ RESCUE ” function can recover the missing RAID set infor - mation. The RAID controller uses the time as the RAID set signa - ture. The RAID set may hav e different time after the RAID set is recovered. The “ SIGANT ” function can regener ate the signature for the RAID set. 6.6 Volume Set Functions A[...]

  • Page 131

    131 WEB BROWSER-BASED CONFIGURATION main menu and click on the “Create V olume Set” link. The “Select The Raid Set T o Create On It” screen will show all RAID set num - bers. Click the RAID set number that to be used and then click the “Submit” button. The “create new volume set” option allows users to select the V ol - ume name, ca[...]

  • Page 132

    WEB BROWSER-BASED CONFIGURATION 132 • Initialization Mode Press “Enter” key to dene fast initialization or Selected the Background (Instant A vailable). When background Initialization, the initialization proceeds as a background task, the volume set is fully accessible for system reads and writes. The operating system can instantly access [...]

  • Page 133

    133 WEB BROWSER-BASED CONFIGURATION tion should normally remain enabled. Disable this function only when using older SCSI drives that do not support command tag queuing 6.6.2 Delete Volume Set T o delete a volume set from RAID set, mov e the cursor bar to the main menu and click on the “Delete V olume Set” link. The “Select The Raid Set T o D[...]

  • Page 134

    WEB BROWSER-BASED CONFIGURATION 134 To Expand an existing volume noticed: • Only the last volume can expand capacity . • When expand volume capacity , you can’t modify stripe size or modify r aid revel simultaneously . • Y ou can expand volume capacity , but can’t reduce volume capacity size. For Greater 2TB expansion: • If your system [...]

  • Page 135

    135 WEB BROWSER-BASED CONFIGURATION 6.6.5 Stop VolumeSet Check Use this option to stop the “Check V olume Set function” . 6.7 Physical Drive Choose this option to select a physical disk from the Main Menu and then perform the operations listed below . 6.6.4 Check Volume Set T o check a volume set from a r aid set: (1). Click on the “Check V o[...]

  • Page 136

    WEB BROWSER-BASED CONFIGURATION 136 6.7.1 Create Pass-Through Disk T o create pass-through disk, move the mouse cursor to the main menu and click on the “Create P ass- Through” link. The “rela - tive setting function” screen appears. A pass-through disk is not controlled by the SA T A RAID controller rmware, it cannot be a part of a volu[...]

  • Page 137

    137 WEB BROWSER-BASED CONFIGURATION When the “Enter P ass- Through Disk Attribute” screen appears, modify the drive attribute v alues, as you want. After you complete the selection, mark the checkbo x for “Conrm The Operation” and click on the “Submit” button to complete the selection action. 6.7.3 Delete Pass-Through Disk T o delete[...]

  • Page 138

    WEB BROWSER-BASED CONFIGURATION 138 6.8 System Controls 6.8.1 System Cong T o set the raid system function, mo ve the cursor to the main menu and click the “Raid S ystem Function” link. The “Raid S ystem Function” menu will show all items, then select the desired func - tion. • System Beeper Setting The Alert Beeper function item is us[...]

  • Page 139

    139 WEB BROWSER-BASED CONFIGURATION Allow Read Ahead (Default: Enabled)—When Enabled, the drive’ s re a d a h e a d ca c h e a l g o r i t h m i s us e d , p r o v i d i n g m a x i m u m performance under most circumstances. • Stagger Power on In a PC system with only one or two drives, the power can supply enough power to spin up both drive[...]

  • Page 140

    WEB BROWSER-BASED CONFIGURATION 140 • Empty HDD Slot LED From rmware v ersion 1.39 date: 04/01/2006 and later , the rmware has added the "Empty HDD Slot LED" option to setup the F ailed LED light "ON "or "OFF". When each slot has a power LED for the HDD installed identify , user can set this option to "OFF[...]

  • Page 141

    141 WEB BROWSER-BASED CONFIGURATION • Disk Write Cache Mode A user can set the “Disk W rite Cache Mode” to: Auto, Enabled, or Disabled. • Disk Capacity Truncation Mode SA T A RAID controllers use drive truncation so that drives from differing vendors are more likely to be able to be used as spares for each other . Drive truncation slightly [...]

  • Page 142

    WEB BROWSER-BASED CONFIGURATION 142 ple, one drive might be 123.5 GB, and the other 120 GB . Areca drive T runcation mode Multiples Of 10G uses the same capac - ity for both of these drives so that one could replace the other . Multiples Of 1G: If you hav e 123 GB drives from different ven - dors; chances are that the capacity v aries slightly . Fo[...]

  • Page 143

    143 WEB BROWSER-BASED CONFIGURATION DHCP lets a network administrator supervise and distribute IP addresses from a central point. The purpose of DHCP is to pro vide the automatic (dynamic) allocation of IP client congurations for a specic time period (called a lease period) and to eliminate the work necessary to administer a large IP network.[...]

  • Page 144

    WEB BROWSER-BASED CONFIGURATION 144 6.8.4 SNMP Conguration (12/16/24-port) T o congure the raid controller SNMP function, click on the “S ys - tem Controls” link. The System Controls menu will show a vailable items. Select the “SNMP Conguration” item. This function can only set via web-based conguration. The rmware SNMP Agent[...]

  • Page 145

    145 WEB BROWSER-BASED CONFIGURATION • SNMP Trap Congurations Enter the SNMP T rap IP Address. • SNMP System Congurations About community , please refer to page 161 of SNMP commu - nity name. The system Contact, Name and Location that will be shown in the outgoing SNMP T rap. • SNMP Trap Notication Congurations Please refer to Appe[...]

  • Page 146

    WEB BROWSER-BASED CONFIGURATION 146 • Time Zone Time Z one conveniently runs in the system tr ay and allows you to easily view the date and time in v arious locations around the world. Y ou can also quickly and easily add your own personal locations to customize Time Z one the way y ou want. • Automatic Daylight Saving Automatic Daylight Saving[...]

  • Page 147

    147 WEB BROWSER-BASED CONFIGURATION 6.8.8 Clear Events Buffer Use this feature to clear the entire events buffer information. 6.8.9 Modify Password T o set or change the SA T A RAID controller password, select “Raid System Function” from the menu and click on the “Change P ass - word” link. The Modify System P assword screen appears. The ma[...]

  • Page 148

    WEB BROWSER-BASED CONFIGURATION 148 6.9 Information 6.9.1 RaidSet Hierarchy Use this feature to view the SA T A RAID controller current raid set, current volume set and physical disk congur ation. Please reference the this chapter “ Conguring Raid Sets and Volume Sets ” RAID controller will automatically go back to the initial screen when[...]

  • Page 149

    149 WEB BROWSER-BASED CONFIGURATION 6.9.2 System Information T o view the SA T A RAID controller ’ s information, move the mouse cursor to the main menu and click on the “System Information” link. The “SA T A RAID controller Information” screen appears. Use this feature to view the SA T A RAID controller’s information. The controller na[...]

  • Page 150

    WEB BROWSER-BASED CONFIGURATION 150 6.9.3 Hardware Monitor T o view the RAID controller’s hardw are monitor information, move the mouse cursor to the main menu and click the “Hardware Monitor” link. The “Hardware Information” screen appears. The “Hardware Monitor Information” provides the temper ature, and fan speed (I/O Processor fan[...]

  • Page 151

    151 APPENDIX Appendix A Upgrading Flash ROM Update Process Since the SA T A RAID controller features ash rmware, it is not necessary to change the hardware ash chip in order to upgr ade the RAID rmware. The user can simply re-progr am the old rm - ware through the In-Band PCI - X/PCIe bus or Out-of -Band Enther - net port McRAID Stor[...]

  • Page 152

    APPENDIX 152 1. T o upgrade the S AS RAID controller rmware, mov e the mouse cursor to “Upgrade Firm ware” link. The “Upgrade The R aid System Firmware” screen appears. 2. Click Bro wse. Look in the location to whi ch the Firmw are upgr ade software was downloaded. Select the File name and click “Open” . 3. Click “Conrm The Oper[...]

  • Page 153

    153 APPENDIX From a remote pc, you can directly open a web browser and enter the IP address. Then enter user name and password to login and start your management. Y ou can nd the rmware update feature in the browser console, System Controls. Upgrading Entire Flash ROM ImageTh rough Arcash DOS Utility Areca now offers an alternative means o[...]

  • Page 154

    APPENDIX 154 • Mode 0 Flash Jumper function: Short: Causes cpu core to be held in rest (mode 0). Arcash utility can upgrade the entire Flash ROM image. Open: This is the normal default board operation. The jumper name for each adapter to upgr ade entire ash ROM im - age as following: ARC-1110/1120/1210/1220/1170 for 4/8/24 ports → J 3 ARC[...]

  • Page 155

    155 APPENDIX • Flash Procedure 1. Power off system and remove power cable. 2. T ake RAID controller out. 3. Set a Close Cap on the J3/J7 2x5 connector . 4. Plug RAID controller back to M/B. 5. Reconnect power cable and boot up from DOS . 6. Flash controller . 7. After ash procedure compeleted, then power off system. 8. Remo ve power cable then[...]

  • Page 156

    APPENDIX 156 Appendix B Battery Backup Module (ARC-6120-BAT) The SA T A RAID controller operates using cache memory . The bat - tery Backup Module is an add-on module that provides power to the SA T A RAID controller cache memory in the event of a power failure. The Battery Backup Module monitors the write back cache on the SA T A RAID controller ,[...]

  • Page 157

    157 APPENDIX • Humidity: 45-85%, non-condensing Electrical • Input V oltage +3.6VDC • On Board Battery Capacity 1000mAH (1*1000mAH) Installation 1. Make sure all power to the system is disconnected. 2. Connector J1 is av ailable for the optional battery backup module. Connect the BBM cable to the 12-pin battery connector on the controller . 3[...]

  • Page 158

    APPENDIX 158 Operation 1. Battery conditioning is automatic. There are no manual pro - cedures for battery conditioning or preconditioning to be per - formed by the user . 2. In order to make sure of all the capacity is a vailable for y our battery cells, allow the battery cell to be fully charged when installed for the rst time. The rst time[...]

  • Page 159

    159 APPENDIX Appendix C SNMP Operation & Denition Overview The McRAID manager includes a rmware-embedded Simple Net - work Management Protocol (SNMP) agent and SNMP Extension Agent for the SA T A RAID controller . An SNMP-based management application (also known as an SNMP manager) can monitor the disk arra y . An example of An SNMP manag[...]

  • Page 160

    APPENDIX 160 MIB Compilation and Denition File creation Before the manager application accesses the SA T A RAID controller , it is necessary to integrate the MIB into the management applica - tion’ s database of events and status indicator codes. This process is known as compiling the MIB into the application. This process is highly vendor-spe[...]

  • Page 161

    161 APPENDIX Starting the SNMP function setting • Community Name Community name acts as a password to screen accesses to the SNMP agent of a particular network device. T ype in the community names of the SNMP agent. Before access is gr anted to a request station, this station must incorporate a v alid community name into its request; otherwise, t[...]

  • Page 162

    APPENDIX 162 windowshttpsetup.exe on the CD-ROM. (If SNMP service w as not installed, please install SNMP service rst.) 3. Click on the Setup le then the W elcome screen appears. 4. Click the Setup le and then the “install the program” screen appears. F ollow the on-screen prompts to complete ARECA SNMP Extension Agent installation.[...]

  • Page 163

    163 APPENDIX 5. A Progress bar appears that measures the progress of the ARECA SNMP Extension Agent setup. When this screen complete, you hav e completed the ARECA SNMP Extension Agent setup. 6. After a successful installation, the “Setup Complete” dialog box of the installation program is displa yed. Click the Finish button to complete the ins[...]

  • Page 164

    APPENDIX 164 SNMP community Congurations Please refer to the community name in this appendix. SNMP Trap Notication Congruations The Community Name should be the same as rmw are- embedded SNMP Community . The SNMP T rap Notication Congruations include level 1: serious, level 2: error , level 3: W arning and level 4: Information. Th[...]

  • Page 165

    165 APPENDIX hardware and Linux are installed and oper ational in your system. For the SNMP Extension Agent Installation for Linux procedure, please refer to <CD-ROM>packagesLinuxSNMPReadme or download from areca.com.tw SNMP Extension Agent Installation for FreeBSD Y ou must have administr ative level permission to install S A T A RAID so[...]

  • Page 166

    APPENDIX 166 Appendix D Event Notication Congurations The controller classies disk arra y events into four levels depending on their severity . These include level 1: Urgent, level 2: serious, lev el 3: W arning and level 4: Information. The level 4 covers noticational events such as initialization of the controller and initiation of th[...]

  • Page 167

    167 APPENDIX Event Level Meaning Action Start Initialize W arning V olume initialization has started Start Rebuilding Warning V olume rebuilding has started Start Migrating W arning V olume migration has started Start Checking W arning V olume parity checking has started Complete Init Warning V olume initialization completed Complete Rebuild W arni[...]

  • Page 168

    APPENDIX 168 D. Hardware Event Event Level Meaning Action DRAM 1-Bit ECC Urgent DRAM 1-Bit ECC error . Check DRAM DRAM F atal Error Urgent DRAM fatal error encountered. Check the DRAM module and replace with new one if required. Raid P owered On Warning Raid P ower On T est Event Urgent T est Event Note: It depends on models, not every model will e[...]

  • Page 169

    169 APPENDIX Appendix E General Troubleshooting Tips Most of controller errors are traceable to external factors, such as conicts with other installed cards, motherboard incompatibility , bad or incorrectly congured drives, loose cables, improper control - ler installation, or other installation errors. T o troubleshoot SA T A RAID controller[...]

  • Page 170

    APPENDIX 170 Q4: What PCI slots are supported by the SATA RAID controllers? Answer: For all PCI - X SA T A RAID controllers, install card in a 64-bit/133MHz PCI- X for the best performance. It also can be used in 64-bit / 66 MHz slots, 32-bit/66MHz PCI slots as well as 32-bit/33MHz slots. All PCI- X SA T A RAID controllers can not work with 5V PCI [...]

  • Page 171

    171 APPENDIX Q8: Will ARECA submit the Linux code to kernel.org? Answer: Y es. ARECA Serial A T A ll RAID the lastest driv er has been in tegrated directly into the Linux kernel 2.6.17-rc3-mm1 (and later), allowing future versions of Linux oper ating systems to support Areca’ s entire fam-ily PCI- X a nd PCI-Expre ss serie s of h igh perfo rmance[...]

  • Page 172

    APPENDIX 172 Q11: Is it possible to write software that will run on Intel’s processors with Intel® EM64T, and AMD’s 64-bit capable processors? Answer: Y es, in most cases. Even though the hardware microarchitecture for each company’ s processor is different, the operating system and software ported to one processor will likely run on the oth[...]

  • Page 173

    173 APPENDIX Appendix F Technical Support Areca T echnical Support provides sever al options for Areca users to access information and updates. W e encourage you to use one of our electric services, which provide product information updates for the most efcient service and support. If you decide to contact us, please have the information such as[...]

  • Page 174

    GLOSSARY 174 Glossary 2TB The 32-bit le systems have a maximum limitation of 2 TB per v olume set. 64-bit versions remov e this limitation. so, if you are building large warehouses, you should consider 64-bit v ersions. Array An arra y is a logical disk comprised of multiple physical hard disks. The number of hard disks in an arr ay is dictated [...]

  • Page 175

    175 GLOSSARY Battery Backup Module Many modern RAID controllers are armed with a battery backup Mod - ule (BBM). While an UPS protects most servers from power uctua - tions or failures, a BBM provides an additional level of protection. In the event of a power failure, a BBM supplies power to retain data in the RAID controller’s cache, thereb y[...]

  • Page 176

    GLOSSARY 176 Hot Spare An extra ph ysical disk drive in a RAID conguration that a controller can use to automatically rebuild a system drive when another driv e fails. The hot spare drive must hav e at least as mush capacity as the largest disk drive in the arr ay or the rebuild will not start. Hardware RAID versus Software RAID Beyond the diffe[...]

  • Page 177

    177 GLOSSARY speed, switched architecture. Each PCI Express link is a serial commu - nications channel made up of two differential wire pairs that provide 2.5 Gbits/sec in each direction. Up to 32 channels may be combined, creating a parallel interface of independently controlled serial links. PCI-X (PCI extended) an enhanced PCI bus technology is [...]

  • Page 178

    GLOSSARY 178 SMART This technology provides users with adv anced warning of Disk Drive failures, thus enabling the Operating S ystem to warn Users of potential failure. S.M.A.R.T . was included in EIDE drives with the A T A-3 and later specication. SNMP Since it was developed in 1988, the Simple Network Management Protocol has become the de fact[...]

  • Page 179

    179 GLOSSARY of data corruption is greatly reduced. The disadv antage is that write- through operations are more time consuming. XOR-Engine All RAID arra ys (with the exception of RAID 0, RAID 1 and RAID 1E) require parity to be calculated and written to the arr ay in conjunction with data. T ypically the parity is a simple XOR on the bytes compris[...]

  • Page 180

    History 180 Revision Page Description 3.2 P117-120 Added ArcHttp Conguration 3.2 P116 Added Mac OS 10.x information 3.2 P82,134 Added expand an existing vol - ume noticed 3.2 p34 Added illustration of ARC - 1210ML/1220ML 3.2 p37, p46, p47 R evised illustration of ARC- 1231ML/1261ML/1280ML/1280 3.2 p43, p44 R evised gure 2-15, added gure 2-[...]