Christie Digital Systems 103-012100-01 manuel d'utilisation

✽ Projection lens is optional. User ’ s Manual 1 03-0 121 0 0-0 1[...]

2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palet te of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Multi-use Remote Contr ol Use the remote control as wired[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respectiv e corporation. T able of Cont ents Feat ures and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o T h e O w n e r ..................... 4 Saf ety Instr uctions . . . [...]

4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P AR TS INSIDE EX CEPT LAMP REPLACEMENT . REFER SER VICING T O QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L T AGE C O N S T IT UT I N G A R I S K O F E L E C T R I C SHOCK IS PRESENT WITHIN THIS UNIT . THIS S[...]

5 V oor de klanten in Neder land Bij dit produkt zijn bat terijen gelev erd. W anneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. NL All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C power[...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the follo wing precautions should be taken. – Do not put any fla[...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, do wnward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in down wardly inclined position, inst[...]

8 Moving the Projector Use the handle grip when moving the projector . Retract the adjustable f eet to prev ent damage to the lens and cabinet when carr ying. When this projector is not in use for an e xtended period, put it into a suitable case to protect the projector . CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump [...]

9 The A C P ower Cord supplied with this projector meets the requirement f or use in the countr y you purc hased it. AC P o wer Cord f or the United Stat es and Canada: A C P ower Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and certified by the Canadian Standard A ssociation (CSA). A C P ow er Cord has[...]

1 0 u e r t Front !0 o q w y i Bottom Back q Indicat ors w T op Cover e T op Cov er Release Butt on r Infr ar ed Remote Receiv er (Fr ont) !6 !5 !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !2 T er minals and Connectors !3 Infrar ed Remote Receiv er (Back) !4 P ower Cor d Conne[...]

1 1 Rear T erminal t R/C JA CK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). y USB CONNECT OR (Ser ies B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to this connector with t[...]

12 w INPUT but ton Select an input source (pp.31–33). q ON/S T AND-B Y butt on T urn the projector on or off (pp.23–24). e LENS but ton Enter the focus, z oom, and lens shif t adjustment mode (p.27). r P oint ed7 8 butt ons – Select an item or adjust the value in the On- Screen Menu (p.25). – P an the image in Digit al zoom + mo[...]

13 o t y q ST AND-B Y button T urn the projector off (p.24). r ON butt on T urn the projector on (p.23). t INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.31–33). y  A UT O PC butt on A utomatically adjust the computer image to its optimum set ting (pp.28, 35). i POINT ed 7 8 buttons – Select an item or adjust th[...]

14 Remote Control !6 !4 !5 !9 !7 !8 !3 MENU but ton Open or close the On-Screen Menu (p.25). !6 ZOOM ed buttons Zoom in and out the images (p.28). !5 D.ZOOM but ton Select the Digital zoom +/- mode and resize the image (p.40). @0 FOCUS but tons Adjust the f ocus (p.28). !8 FIL TER but ton Scroll the filter (p.29). !4 P -TIMER butt on[...]

15 Remote Control Battery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. Press the lid do wnw ard and slide it. T wo AAA siz e batter ies F or correct polarity (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o insure saf e opera[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . S witc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code f or the projector first before c hangi[...]

1 7 AD JUST ABLE FEE T Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rotate the both f eet clockwise. T o low er the projector or to retract the adjust able f eet, rot ate the both f eet countercloc kwise. T o correct k ey[...]

1 8 When replacing the lens or using an optional lens, install the lens by follo wing the instructions belo w . A sk the sales dealer for detailed information of the optional lens specifications. Lens Installation While pressing the top cov er release but ton on the top cov er , slide the top co ver to ward front to remov e it Shif t the lens to th[...]

1 9 NO TES ON LENS INST ALLA TION ● Do not touc h or remov e any parts ex cept the lens and related parts. It may result in malfunctions, electrical shoc k, fire hazard or other accidents. ● Bef ore inst alling or replacing the lens, c hec k that the Model No. of the Projection Lens matc hes to the projector . ● F or det ails of the lens and [...]

20 Monitor Output BNC cable Connecting to a Computer (Digital and Analog RGB) Monitor Output G B R H/V V D VI-Digit al cable V GA cable V GA cable USB cable USB port Unplug the pow er cords of both the projector and external equipment from the A C outlet bef ore connecting cables. Cables used for connection ( ✽ = Cables not supplied with this pro[...]

21 RGB Scart 21 -pin Output Connecting to V ideo Equipment (Video, S-V ideo) S-video cable S-video Output Composite Video Y - Pb/Cb - Pr/Cr BNC cable Unplug the pow er cords of both the projector and external equipment from the A C outlet bef ore connecting cables. Cables used for connection ( ✽ = Cables not supplied with this projector .) • V [...]

22 This projector uses nominal input v olt ages of 1 00–1 20 V or 200– 240 V A C and it automatically selects the correct input voltage. It is designed to work with single-phase po wer systems ha ving a grounded neutral conductor . T o reduce the risk of electrical shoc k, do not plug into any other type of pow er system. If you are not sure of[...]

23 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet. The LAMP indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or the ON but ton on the remote control. The LAMP indicator dims and the cooling fans start to operate. The preparation displa y appears[...]

24 Press the ON/S T AND-B Y but ton on the side control or the ST AND-B Y but ton on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or the ST AND-B Y but ton on the remote control again to turn of f the projector . The LAMP indicator lights bright and the PO WER indicator t ur[...]

25 Side Contr ol SELECT butt on How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual. Use the P oint 7 8 but tons to select a Menu icon. Use the P oint ed [...]

26 Menu Bar For Computer Source For Video Source Same function as menu for Computer Source. Same function as menu for Computer Source. Guide Window Show the selected Menu of the On- Screen Menu. PC Syst em Menu Used to select computer system (p. 34). Image Select Menu Used to select an image lev el among Standard, Real, and Image 1–1 0 (p. 38). S[...]

27 Operating with Projector Control The f ollowing lens operation can be made with the L ens but ton on the side control. Press the LENS but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Display “L ens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired poi[...]

28 Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freez e the pict ure on the screen. T o cancel the FREEZE function[...]

29 Press the NO SH O W but ton on the remote control to blac k out the image. T o restore to normal, press the NO SHO W but ton again or press any other but ton. NO SHOW but ton FIL TER butt on Press and hold the FIL TER but ton for more than five seconds to operate electrically operated filter to replace the filter . KEY S T ONE butt on Reduce the[...]

30 Pointer Function P ointer ✔ Note: • Y ou can choose the pat tern of Pointer (Ar row/Finger/Dot) in the Set ting Menu (p. 52) Y ou can mov e the P ointer of the projector with the remote control to emphasize a part of the projected image. Press the POINTER but ton to activ ate the P ointer function. 1 2 3 MOUSE POINTER butt on POINTER butt on[...]

31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, or INPU T 3 but tons on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation Remote Contr ol butt on operation Side Contr ol INPUT butt on Press the INPU T but ton on the side control. [...]

32 Computer Input Source Selection WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to move the red ar row pointer to the desired input and then press the SELECT but ton. The Source S[...]

33 When the video input signal is connected to the Y - Pb/Cb-Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When the video input signal is connected to the S- VIDEO jac k, select S-Video. When connecting to video equipment, select the type of Video source in the Source Select Menu.[...]

34 Computer System Selection This projector automatically t unes to various types of computers based on V G A, SV GA, XG A, SXGA, SXG A+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 71–72). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a p[...]

35 Auto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint e d but tons[...]

36 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust several parameters to matc h those special signal f ormats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It all[...]

37 Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the SELECT but ton. Mov e the red arro w pointer to one of the Mode 1 to 1 0 in whic h you w ant to store, and then press the SELECT but ton. T o reset the adjusted data, select Reset and press the SELECT but ton. A confirmation bo x appears and then select [Y es][...]

38 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to move the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le vel preset on the projector . Standard Pict[...]

39 Screen Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to move the red frame pointer to the desired function and then press the SELECT but[...]

40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. P ress the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The Panning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al zoom + mode b y pressing the D .ZOOM but ton on t[...]

41 A V S Y STEM MENU (VIDEO OR S-VIDEO) A V S Y STEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the A V Sy stem Menu icon. Use the P oint ed but tons to move the red ar row pointer to the desired system and then press the SELECT b[...]

42 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to move the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Image Level Selection Mov e the red frame pointer to the desi[...]

43 Screen Size Adjustment Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to move the red frame pointer to the desired function and then press the SELECT but ton. 1 2 ✔ Note: • Wide cannot be operated when “720p, ” “1 035i,[...]

44 Ke ystone This function is used to store or reset the k eystone cor rection when the A C po wer cord is unplugged. Use the P oint 7 8 but tons to switc h bet w een eac h option. Store . . . Keep the k eystone cor rection even when the A C power cord is unplugged. Reset . . Release the k eystone correction when the A C power cord is unplugged. T [...]

45 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to move the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog box. Use the P oint 7 8 but tons to adjust the set tin[...]

46 A uto pictur e control Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c hec k mark if you do not want to apply the adjusted color[...]

47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressive mode. Pres[...]

48 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, It alian, Spanish, P ortuguese, Dutc h, S wedish, Russian, Chinese, K orean, or Japanese. Use the P oint ed bu[...]

49 This function allo ws you to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Before capturing an image, select “ Standard ” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to XGA (1 024 X 7 68). • Cer tain signals m[...]

50 Change the Log o PIN code lock setting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 buttons to switc h On/Of f, This function pre vents an unauthorized person from c hanging the screen logo. Of f . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo canno[...]

51 Lamp control Filter contr ol Choose the running speed of cooling f ans from the following options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an control Remote contr ol Remote contr ol When pressing the SELECT but ton at Remote control, the R emote control code menu appears. RC sensor Select a location of the in[...]

52 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C pow er cord to the wall outlet. ✔ Note: • Be sure to turn of f the projector properly (see “T urning Off the Projector” on page 24). If the projector is turned of f in the incorrect sequence, the On start function d[...]

53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthorized persons. . . . . . Unloc ked. . . . . . Loc k the side control but tons[...]

54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 76, AND KEEP IT SECUREL Y . IF Y OU FOR GET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST ARTED . The PIN code can be c hanged to y our desired four -digit number . Press the P oint d[...]

55 F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est patt ern V ario[...]

56 Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and may result in internal heat buildup and adversely af f ect the lif e of the projector . This projector has an electrically operated f[...]

57 T urn off the projector , and unplug the A C po wer cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press s on the filter co ver to release the latc h and open the filter cov er . 3 Put the ne w one bac k into the position and close the filter cov er . Mak e sure that the filter cartridge is prop[...]

58 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to move the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box appears s[...]

59 T urn of f the projector and unplug the A C pow er cord. Let the projector cool for at least 45 minutes. Loosen the scre w and open the lamp cover . Pull out the lamp by using the built in handle. 1 3 Replace the lamp with a ne w one. Make sure that the lamp is properly and fully inserted. 4 Open the filter cov er . (p.57) 2 Connect the A C po w[...]

60 ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer . When ordering , give the f ollowing information to the dealer . ● Model No. of your pr ojector : 1 03-0 121 0 0-0 1 ● Replacement Lamp T ype No. : 003-120333-0 1 (Ser vice P arts No. 61 0 334 2788) Resetting the Lamp Counter Be sure to reset the Lamp counter af ter [...]

61 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif fer from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for eac h lamp. Some lamps may fail or terminate[...]

62 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens. A void using an e xcessiv e amount of cleaner . Abrasive cleaners, solvents, or other harsh c h[...]

63 Maint enance and Car e The W ARNING indicators show the state of the function whic h protects the projector . Chec k the state of the W ARNING indicators and the PO WER indicator to t ake proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector [...]

64 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Make sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po wer cords are properly connected[...]

65 W ARNING: High voltag es are used t o operat e this project or . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you how to obt ain se[...]

66 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Video RGB Go to Syst em (2) Go to Syst em (3) Go to Syst em (1) Go to Syst em (2) Video Y , Pb/Cb,Pr/Cr S-video Go to Syst em (3) Go to Syst em (2) Input 2 Input 3 Go to Syst em (1) Input H-sync freq.[...]

67 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T r ue Wide F ull screen Digital zoom + Digital zoom - PC A djust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ [...]

68 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1/Eco 2 Y es/No 1 2 languages provided. Menu Logo Lamp control Filter control Both/F ront/Bac k Normal/Max P ower management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Rea[...]

69 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr ojector Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector is of f . (T he A C pow er cord is unplugged.) The projector is in stand-by mode. P ress the ON/ST AND-B Y but ton to turn on[...]

70 Indicat ors Pr ojector Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector has been cooled do wn enough and the temperat ure returns to normal. When turning on the projector , the W ARNING TEMP . indicator stops blinking . Chec k and replace the filter . The lamp cannot light up. (T he[...]

71 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -F req.(Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x400 31 .470 70.090 V GA 3 640x400 31 .470 70.090 V GA 4 640x480 37 .860 7 4.380 V GA 5 640x480 37 .860 72.81 0 V GA 6 640x480 37 .50 0 75.0 00 V GA 7 640x480 43.269 85.00 0 MA C LC1 3 640x480 34.970 66.60 0 MA C 1 3 640x480 35.000 66.670 480p 640x[...]

72 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -F req.(Hz) D-V GA 640x480 31 .470 59.940 D-480p 720x480 31 .470 59.880 D-575p 720x575 31 .250 50.0 00 D-SV G A 800x60 0 37 .879 60.320 D-XGA 1 024x7 68 43.363 60.0 00 D-WXGA 1 1 366x7 68 48.360 60.0 00 D-WXGA 2 1 360x7 68 47 .70 0 60.0 00 D-WXGA 3 1 37 6x7 68 48.360 60.000 D-WXGA 4 1 360x7 68 56.1 [...]

73 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 1 4.56” x 7 .36” x 1 7 .32” (370 mm x 187 mm x 440 mm) (Not including raised portions) Net Weight 25.8 lbs (1 1 .7 kg) Feet Adjustment 0˚ to 6.5˚ P anel Resolution LCD Panel Sy stem 1 .3” TFT Active Matrix type, 3 panels Pane[...]

7 4 Optional Parts Lens Replacement The lens of this projector can be replaced with other optional lens. This f eat ure enables you to use the projector for wide v ariet y of uses. F or inst allation and replacement of the lens, alwa ys contact the sales dealer . The projector lens must be installed or replaced by well-trained sales or service engi[...]

75 Configurations of T erminals ANAL OG/ MONIT OR OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Sense 0 V ert. sync. DDC Cloc k 9 13 1 0 12 1 1 14 15 CONTROL PO[...]

7 6 W rite down the PIN code number in the column belo w and keep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , contact the ser vice station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv alid[...]

77 Dimensions 3.94 (100) 14.57 (370.0) 5.75 (146) 17.32 (440) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 2.05 (52) Unit: inc h (mm) Appendix[...]

KC3KL CHRISTIE DIGIT AL SYSTEMS, Inc. 809 Wellington Street North Kitc hener , Ontario Canada N2G 4Y7 T elephone (51 9) 7 44-80 05 North America call toll-free 1 -800-265-21 71 (sales) Fax (51 9) 7 49-3136 CHRISTIE DIGIT AL SYSTEMS, Inc. 1 0550 Camden Drive Cypress, CA 90630 USA T elephone (71 4) 236-861 0 Fax (71 4) 503-3385 T oll F ree 1 -800-407[...]