Français dropdown-ico

DIGITAL-LOGIC MSB900L manuel d'utilisation

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66

Aller à la page of

Les manuels d’utilisation similaires

Un bon manuel d’utilisation

Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation DIGITAL-LOGIC MSB900L. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel DIGITAL-LOGIC MSB900L ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.

Qu'est ce que le manuel d’utilisation?

Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation DIGITAL-LOGIC MSB900L décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.

Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.

Donc, ce qui devrait contenir le manuel parfait?

Tout d'abord, le manuel d’utilisation DIGITAL-LOGIC MSB900L devrait contenir:
- informations sur les caractéristiques techniques du dispositif DIGITAL-LOGIC MSB900L
- nom du fabricant et année de fabrication DIGITAL-LOGIC MSB900L
- instructions d'utilisation, de réglage et d’entretien de l'équipement DIGITAL-LOGIC MSB900L
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes

Pourquoi nous ne lisons pas les manuels d’utilisation?

Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage DIGITAL-LOGIC MSB900L ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles DIGITAL-LOGIC MSB900L et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service DIGITAL-LOGIC en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées DIGITAL-LOGIC MSB900L, comme c’est le cas pour la version papier.

Pourquoi lire le manuel d’utilisation?

Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif DIGITAL-LOGIC MSB900L, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.

Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation DIGITAL-LOGIC MSB900L. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.

Table des matières du manuel d’utilisation

  • Page 1

    Detailed Technical US ER M ANUAL FOR: 3.5”-SBC MSB900/L Nordstrasse 11/F CH- 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.com Homepage: http://www.digitallogic.com[...]

  • Page 2

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 2 For internal use only: File: MSB900_Detailed_V1.0 Path: R:HANDBUCHMS BMSB900MS B900_Detailed_V1.0 .doc COPYRIGHT     2008 BY DIGITA L-LOGIC A G This publication is protected by c opyright and all r ights are reserved. N o part of this docum ent m ay be repro- duced, tra ns[...]

  • Page 3

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 3 Table of Contents 1. Preface ....................................................................................................................... 5 1.1. Tr adema rks ................................................................................................................... 5 1.[...]

  • Page 4

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 4 5.6.3. W atchdog ................................... ................................ ................................ ................................ 28 5.6.4. ROM-BIOS Sockets ............................................ ................................ ................................[...]

  • Page 5

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 5 1. P REF A C E The inf ormation contain ed in this m anual has been carefull y ch ecked and is believed to be accurate; it is subject to c hange without notice. Product adva nces m ean that s ome specifications may have changed. DIGITAL-LOGIC AG ass um es no responsibility f or any inaccu[...]

  • Page 6

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 6 1.5. Recycling Informati on All com ponents within this product f ulfill the requirem ents of the RoHS (Restrictio n of Hazardous Substanc es Directive). The pro duct is soldered with a lead f ree process . 1.6. Technical Support 1. Contact your loc al DIGITAL-LOG IC Technical Support, in[...]

  • Page 7

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 7 1.8. Explanation of Symbols CE Conformity This symbol indica tes that the pro duct described in this manual is in compliance wi th all ap- plied CE standards. Caution, Electric Sho ck! This symbol and t itle warn of ha zards due to electrical shock s (> 60V) when to uching prod- ucts o[...]

  • Page 8

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 8 1.9. Applicable Docume nts and Sta ndards The f ollowing p ublications are used in c onjunction with this manual. W hen any of the referenced specifica- tions are supersede d b y an approved r evision, that re vision s hall app ly. Al l docum ents m ay be obtained from their respective or[...]

  • Page 9

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 9  Smart Battery Dat a Specification Revision 1.1, Dec ember 11, 1998. www.sbs-f orum.org  System Managem ent Bus ( SMBus) Specif ication Vers ion 2.0, Augus t 3, 2000 C opyright © 1 994, 1995, 1998, 2000 Duracell, Inc., Ene rgizer Power Systems, Inc., Fujitsu, Ltd., Intel Corporatio[...]

  • Page 10

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 10 RoHS is often refer red to as the "le ad-free" directive but it restricts the use of the following substanc es:  Lead  Mercury  Cadmium  Chromium VI  PBB and PBDE The max imum allowable concentrat ion of an y of the above m entioned substanc es is 0.1% (excep t f[...]

  • Page 11

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 11 1.12. Swiss Quality  100% Made in Switzerland  DIGITAL-LOGIC is a m ember of "Swiss-Label"  This product was not m anufactured by em ployees earning piecework wages  This product was manufactured i n humane work conditions  All em ployees who worked on this produ[...]

  • Page 12

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 12 2. O VERVIEW 2.1. Standard Features of the MSB9 00/L The MICROS PACE 3.5”-S BC is a miniaturized m odular device incorporating the major elem ents of a PC/ AT compatible com puter. It includes stan dard PC/AT compatible elem ents, such as:  Powerful GEODE  LX-900 600 MHz  Lega[...]

  • Page 13

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 13 2.3. MSB900 Block Diagram[...]

  • Page 14

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 14 2.4. MSB900/MSB90 0L specification s CPU Specification CPU GEODE LX900 CPU Core Suppl y 1.25V very low po wered Mode Real / Protected Compatibilit y x86 W ord Size 32Bits Secondary Cache 128kB Physical Address ing 32 lines Virtual Address ing 16GB Clock Rates 600MHz Socket Standard Solde[...]

  • Page 15

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 15 Mass Storage Specification FD Floppy disk interface not supported HD E-IDE interfac e, AT-type, for m ax. 2 hard disk s, 44pin connector, for 1.3, 1.8 and 2. 5" hard disk with 44 pins IDE Standard AT Interfa ces: Specification Name FIFO IRQs Addr. Standard Option Serial COM1 COM2 ye[...]

  • Page 16

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 16 Operating Environmen t Specification Relative hum idity 5-90%, non-condens ing Vibration 5-2000Hz, 0.1G Shock 1G Temperature MSB900*: Operating: Stan dard version: -2 5° C to +70° C Extended version: -4 0° C to +85 ° C Storage: -55° C to +85° C * = with passive c ooler MSB900L**: O[...]

  • Page 17

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 17 2.7. Dimensions & Dia grams 2.7.1. MSB900/L Board / Version Unit: Tolerance: Dat e / Author MSB900/L mm (m illimeter) + / - 0.1mm 25.10.2006 / BRR[...]

  • Page 18

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 18[...]

  • Page 19

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 19[...]

  • Page 20

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 20[...]

  • Page 21

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 21 2.7.2. MSB800CON Part Nr 802205 Board / Version Unit: Tolerance: Dat e / Author MSB800CON mm (m illimeter) + / - 0.1mm 25.10.2006 / BRR[...]

  • Page 22

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 22 2.8. MSB900/L Incompa tibilities to a stan dard PC/ AT None. 2.9. Related A p plica tion Notes Application No tes are av ailable at http://www.digit allogic.com     support, or on an y DIGIT AL-LOGIC Application CD. # Des cription 2.10. High Frequency Radia tion (to meet EN55[...]

  • Page 23

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 23 2.11. Battery-Lifetime Battery specs: Low est temp. -40° C Nominal temp. +20° C Highest temp. +85° C Manufacturer: pba T y pe: ER10280 Capacity versus T emp: 10uA 420mAh 400mAh 350m Ah Voltage versus T emp. 10uA 3.6V 3.6V Ca. 3.6V Nominal values: 3.6V / 400m Ah @ 0.5mA / -55° C. ..~+[...]

  • Page 24

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 24 4. BIOS H IST OR Y This BIOS histor y is for the MSB90 0/L. This BIOS histor y is not fo r the followin g products: MSEP900, MSM9 00, SM900 Version: Date: Status: Modifications: 1.23 02.2007 Initial Relea se - - - - - - - Note… This pr oduct has a unique BIOS ver sion. For a descr ipti[...]

  • Page 25

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 25 5. D ET A I LED S YSTEM D ES CRIPTION This s y stem configuration is based on the ISA architecture. Chec k the I/O and m em ory map in this chapter. 5.1. Power Require ments The power is connec ted through the wide-range power connector. The sup ply uses onl y the +8V to +32V and the gro[...]

  • Page 26

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 26 5.3. CPU, Boards an d R A M s 5.3.1. CPUs of this MIC ROSPA CE Product Processor: T ype: Clock: GEODE LX900 National 600 MHz 5.3.2. Numeric Coproces sor It is integrated in th e LX900 CPU. 5.3.3. DDRA M Memory Speed: 333 Size: DDR-SODIMM DDRDIMM 200p in Bits: 64bit Capacity: 256-1024MB y[...]

  • Page 27

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 27 5.4.3. Serial Ports CO M1-COM2 The serial c hannels are fully com patible with 16C 550 U ARTS. COM1 is the primar y s erial por t, and is su p- ported b y th e boar d's ROM-BIOS as the PC-DOS 'CO M1' de vice. T he s econdar y serial port is CO M2; it is supported as the &a[...]

  • Page 28

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 28 5.6. Timers and Cou nters 5.6.1. Programmable Timers An 8 253 compatible timer /counter device is a lso included in th e board's ASIC device. This device is utilized in prec isel y the same manner as in a standard AT implementation. Each channel of the 8253 is driven by a 1.190 MHz [...]

  • Page 29

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 29 5.6.4.1. Standard BIOS RO M Device: F W H Map: E0000 - FFFFFh Core BIOS 128k C0000 - C7FFFh VGA BIOS 32k CC000 - CFFFFh FREE 5.6.5. BIOS CMOS Setu p If wrong s etups are memori zed in the CMOS-RA M, the default values will be loaded af ter reset ting the RTC/CMOS-RAM by de-solderin g the[...]

  • Page 30

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 30 CMOS Map Location De scription 00h Time of day (seconds) specified in BCD 01h Alarm (seconds) specified in BCD 02h Time of day (minutes) specified in BCD 03h Alarm (minutes) specified in BCD 04h Time of day (hours) specified in BCD 05h Alarm (hours) specified in BCD 06h Day of week speci[...]

  • Page 31

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 31 CMOS Map continued... Location Description 0Eh CMOS Location for Bad CMOS and Checksum Flags Bit 7 = Flag for CMOS Lost Power 0 = Power OK 1 = Lost Power Bit 6 = Flag for CMOS checksum bad 0 = Checksum is valid 1 = Checksum is bad 0Fh Shutdown C ode 10h Diskette Drives Bits 7-4 = Dis ket[...]

  • Page 32

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 32 CMOS Map continued... Location Description 15h Base Memory Size (in kB) - Low Byte 16h Base Memory Size (in kB) - High Byte 17h Extended Memory Size (in kB) - Low Byte 18h Extended Memory Size (in kB) - High Byte 19h Extended Drive Type - Hard Drive 0 1Ah Extended Drive Type - Hard Drive[...]

  • Page 33

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 33 CMOS Map continued... Location Description 22h Byte 3 Bits 7-6 = Res erved Bits 5-0 = Uppe r 6 bits of W rite Precompensation 23h Byte 4 Bits 7-0 = Num ber of Heads 24h Byte 5 Bits 7-0 = Sec tors Per Track 25h - 2Ah Custom Drive Table 1 These 6 Bytes (48 bits) contain the following data:[...]

  • Page 34

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 34 CMOS Map continued... Location Description 33h Base Memory Installed Bit 7 = Flag for Memory Size 0 = 640kB 1 = 512kB Bits 6-0 = Res erved 34h M i nor CPU Revision Differentiates CPUs within a CPU type (i.e., 486SX vs 486 DX, vs 486 DX/2). This is crucial for correc tly determining CPU i[...]

  • Page 35

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 35 5.8.1. EEPROM Memory for Setup The EEPROM is used for setup an d configuration data, stored as an alternative to the CMOS-RTC. Option- ally, the E EPROM setup driver ma y update the CMO S RT C, if the battery is runn ing down a nd the check sum error would appe ar and stop the s ystem. T[...]

  • Page 36

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 36 5.9.2. System I/O map The following tabl e de tails the legac y I/O r ange for 0 00h t hrough 4FFh. Eac h I/O location has a read/ write (R/W) capability. Note the follow ing abbreviatio ns: --- Unknown or can not be determ ined. Yes Read and write the reg ister at the i ndicated locatio[...]

  • Page 37

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 37 I/O Map Continued… I/O Addr. Function Size R/W Comment If KEL Memory Offset 100h[0] = 1(Emulation- Enabled bit). 060h Keyboard/Mouse - Data Port 8bit Yes If MSR 5140001Fh[0] = 1 (SNOOP bit) and KEL Memory Offset 100h[0] = 0 (Emulation- Enabled bit). 061h Port B Control 8bit Yes 062h-06[...]

  • Page 38

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 38 I/O Map Continued… I/O Addr. Function Size R/W Comment 0CCh Master DMA Address - Channel 7 8bit Yes 16 bit values in two transfers. 0CDh No Specific Usage 8bit --- 0CEh Master DMA Counter - Channel 7 8bit Yes 16bi t values in two transfers. 0CFh No Specific Usage 8bit --- 0D0h Master D[...]

  • Page 39

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 39 I/O Map Continued… I/O Addr. Function Size R/W Comment 3F1h Flopp y Status R B 8bit RO First Floppy. 3F2h Flopp y Digital Out 8bit Shw@ First Floppy. 3F3h No Specific Us age 8bit --- 3F4h Flopp y Cntrl Status 8bit RO First Floppy. 3F5h Flopp y Data 8bit Yes Firs t Floppy. 3F6h No Speci[...]

  • Page 40

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 40 6. VGA 6.1. VGA/LCD Contr oller of the Ge ode LX900 • Highly integrated flat panel and C RT GUI Acc elerator & Multim edia Engine, P alette/DAC, C lock Synthe- sizer, and integrat ed fram e buffer • HiQColor TM Tec hnology implem ented with T MED (Tem poral Modulated Energ y Dist[...]

  • Page 41

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 41 7. V IDEO I NPUT The MSB900 conta ins a low-cost video inp ut port. It c onsist of LX900’s video input port (VIP) and t he ext er- nal f ram e grabber chip SAA7111A. T his port is c apable of digitizing a CVB S video signal with 15 f ram es per second at a r esolution of 352x288bits. N[...]

  • Page 42

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 42 Top view of the MSB900/L[...]

  • Page 43

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 43 Bottom v iew of the MSB900/L[...]

  • Page 44

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 44 X1 Power Supply Pin Signal 1 (Shield) Po wer supply 8-30 V 2 NC 3 Power su pply GND X14 V ideo IN Pin Signal Pin Signal 1 CVB S 2 GND[...]

  • Page 45

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 45 X15 Operator Panel / Flat Panel (b ottom side) X15 is intended to be used internal ly to at tach a n ope rator panel. Some signa ls m ay not be present or are shared with other connecto rs. This connector is not assem bled and is only for OEM-specific applicat ions. A 2mm x 44pin hea der[...]

  • Page 46

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 46 X15 Reverse Pin Configuratio n MSB900 LVD S X15 (on comp onent side) Attention! W hen X15 is soldered on the c omponent side, a different pin num bering schem a must be applied . Odd and even pin number s are swapped. Igno ring thi s warning may result in th e destruction of any attached[...]

  • Page 47

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 47 X31 Keyboard P S/2 and M ouse Utility Connector Connector and Adapter Mini- DIN PS/2 (6 PC) Remarks Shield Sh ield KEYBOARD DATA 1 GND 3 VCC (+5V) 4 CLK 5 Mini- DIN PS/2 (6 PC) Remarks VCC (+5V) 4 MOUSE DATA 2 GND 3 CLK 6 PS/2 Front side ( female) X33 10/100 B ASE-T Interface Connector 0[...]

  • Page 48

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 48 X39 Serial Port COM 2 Header onboard D-SUB conne ctor Signal Pin 1 Pin 1 DCD Pin 2 Pin 6 DSR Pin 3 Pin 2 RxD Pin 4 Pin 7 RTS Pin 5 Pin 3 TxD Pin 6 Pin 8 CTS Pin 7 Pin 4 DTR Pin 8 Pin 9 RI Pin 9 Pin 5 GND Pin 10 open Attention! If the X39 connector is used, DO NO T connect th e COM2 signa[...]

  • Page 49

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 49 X52 USB UDOC ( not assembl ed ) Pin Signal Pin Si gnal 1 VCC 6 NC 2 NC 7 GND 3 USB- P2- 8 NC 4 NC 9 NC 5 USB- P2+ 10 NC Attention! X52 for USB-DOC-Flash drives are onl y for OEM use. T he connector is not assem bled. T he UDOC may be assem bled if the Com pactFlash is not as sembled. X60[...]

  • Page 50

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 50 X61 Serial Port COM 1, Parallel Port L PT1 Header onboard D-SUB conne ctor Signal Pin 1 Pin 1 DCD Pin 2 Pin 6 DSR Pin 3 Pin 2 RxD Pin 4 Pin 7 RTS Pin 5 Pin 3 TxD Pin 6 Pin 8 CTS Pin 7 Pin 4 DTR Pin 8 Pin 9 RI Pin 9 Pin 5 GND Pin 10 GND Pin 11 select Pin 12 Pin 12 paper end Pin 13 Pin 11 [...]

  • Page 51

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 51 X101 PCI-104 BUS Int erface Pin A B C D 1 GND/5.0V KEY2 Reserve d +5 AD00 2 VI/O AD02 AD01 +5V 3 AD05 GND AD04 AD03 4 C/BE0* AD07 GND AD06 5 GND AD09 AD08 GND 6 AD11 VI/O AD10 M66EN 7 AD14 AD13 GND AD12 8 +3.3V C/B E1* AD15 +3.3V 9 SERR* G ND SB0* PAR 10 GND PERR* +3.3V SDONE 11 STOP* +3[...]

  • Page 52

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 52 X230 JT A G -Port Pin Signal Pin Signal 1 T CK 2 T MS 3 T DI 4 T DO X301 VG A Monitor (CRT-Signals) 15pins High-Densit y DSub Pin S ignal 1 Red 2 Green 3 Blue 13 H-Synch 14 V-Synch 5 + 11 Brid ged 5, 6, 7, 8 Grounde d The VGA-CRT signals from J2 m ust be wired to a st andard VGA H igh De[...]

  • Page 53

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 53 9. J UMPER L OC A TIONS ON THE B O ARD The f ollowing figure shows the location of a ll jum per bloc ks on th e MSB9 00/L boa rd. The num bers shown in this f igure are silk screened on the board so that the pins can easily be located. This chapter refers to the individual pins f or thes[...]

  • Page 54

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 54[...]

  • Page 55

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 55 10. C A BLE I NTERF A CES 10.1. The Hard Disk Cable 44 pin IDT Term inal for Dual Row ( 2.00mm grid) and 1.00mm f lat cable; 44pins = 40 pins signal and 4pi ns power. 1 1 2 43 43 44 44 39 39 40 40 2 Max. length for the IDE cable is 30cm. Attention! Check the pin 1 mark er of the c able a[...]

  • Page 56

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 56 10.2. The COM1/LPT Serial Interface Cable Term inal for dual row 2mm grid and 1mm flat cable. Connector X61 Pin Signal COM1 9pin D-Sub ma le Pin 1 = DCD 1 Pin 2 = DSR 6 Pin 3 = RXD 2 Pin 4 = RT S 7 Pin 5 = TX D 3 Pin 6 = CT S 8 Pin 7 = DT R 4 Pin 8 = RI 9 Pin 9 = GND 5 Pin 10 Pin Signal [...]

  • Page 57

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 57 10.3. The COM2 Serial Interface Cable DT term inal for dual row 0.1" (2.54m m grid) and 1.27mm flat cable. Connector X39 Pin Signal COM2 9pin D-Sub ma le Pin 1 = DCD 1 Pin 2 = DSR 6 Pin 3 = RXD 2 Pin 4 = RT S 7 Pin 5 = TX D 3 Pin 6 = CT S 8 Pin 7 = DT R 4 Pin 8 = RI 9 Pin 9 = GND 5 [...]

  • Page 58

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 58 11. T HE RMAL S PECIFIC A TIONS 11.1. Thermal Analysis for Case In tegration The MSB900/L has a unique therm al design. Heat sources are located on the bott om s ide of the PCB. Usually this m eans the board will be mounted upside do wn with the CPU therm ally in contact with a heat sink[...]

  • Page 59

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 59 12. A SSEMBL Y V IEWS 12.1. MSB900/L[...]

  • Page 60

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 60[...]

  • Page 61

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 61 12.2. Mechanical Dimensions MSB900 Version Unit: mm (millimeter) Tolerance: +/- 0.1mm Date: 28.03.2006 Author: BRR[...]

  • Page 62

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 62 13. PXE-B OOT AND PXE-S ETUP IN THE BIOS PXE Protocol PXE is defined on a foun dation of industr y-standard Internet protoco ls and services that are widel y d eplo yed in the industry, namely T CP/IP, DHC P, and TFT P. These standardize the form of the interactions between clients and s[...]

  • Page 63

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 63 BIOS-Setup Scre en with the LAN- BOOT (PX E) DISABLE / ENABLE m enu: After ENABLING th e LAN-Boot, th e Password m ust be entered. The Password m ust be requested with the PX E-licence order form on the follo wing page.[...]

  • Page 64

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 64 14. PXE-L ICENSE O RDER The PXE-Function must be licensed before it can be enable d. To order, f ill out and sign this form ; r eturn to the fax num ber below. This f orm may be printed out separately f rom the digital cop y of this manual on t he Product CD. Note... One license per form[...]

  • Page 65

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 65 15. I NDEX 1 10/100 BASE-T Interface 47 A Addressing PCI D evices 23 Application Notes 16, 22 B Battery-Lifetim e 23 BIOS CMOS 29 BIOS Histor y 24 BIOS, Reload Def ault Settings 53 Block Diagram 13 Boot Time 25 Bus Signals 23 C CMOS 29 CMOS Setup 34 Connectors 41 Controllers 27 Counters [...]

  • Page 66

    DIGITAL-LOGIC AG M SB900/L Detailed T echnical Manual V1.0 66 RoHS Comm itment 9 ROM-BIOS 28 RTC 28 S Safety Precautions 9 Schematics 59 Serial Interface Ca ble 56, 57 Serial Port COM1 50 Serial Port COM2 48 Serial Ports 27 Specifications 14 SQS 11 Standards 8 Swiss Association f or Qualit y and Management Systems 11 Swiss Qualit y 11 Symbols 7 Sys[...]