Dynalink RTA230 manuel d'utilisation

User Manual RTA230 ADSL R outer/Modem[...]

ii No part of this publication ma y be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are tradema rks or registered tradema rks of their respective companies. 2004/1/14 Rev:04 This manual currently suits for RT A230/RT A230B/RT A231. 000230-rta[...]

AD S L Router User Manua l iii Safety Notes For Installation  Use only the type of power source indicated on the marking labels.  Use only the power adapter supplied with the product.  Do not overload wall outlet or extension cords as this may increase the risk of electric shock or file. If the power cord is frayed, replace it with a new o[...]

C ontents iv Contents Before You Use ........................................................................................vii Features ............................................................................................................ vii Unpacking .........................................................................................[...]

C ontents v PPP over ATM/ PPP over Ethernet ................................................................ 25 MAC Encapsulated Routing (MER) ................................................................ 28 IP over ATM ............................................................................................. 30 Bridging......................[...]

AD S L Router User Manua l vi Appendix................................................................................................. 78 Software .................................................................................................. 78 Hardware ...........................................................................................[...]

Be f ore You Use vii Before You Use Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL) Router. With the asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows you to have both voice and data services in use simultaneously all over one phone line. ADSL Router is designed to offer cost-ef [...]

AD S L Router User Manua l viii Routing Features  NA T (Network Address Translation) / PA T (Port Address Translation) let multiple users on the LAN to access the internet for the cost of only one IP address.  ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, Real Player, CuSeeMe, VPN pass-through, e[...]

Ch apter 1: O verv i ew 1 Chapter 1 Overview This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first. Physical Outlook Front Panel The following illustrations show the front panel of the ADSL Router (with USB interface[...]

AD S L Router User Manua l 2 Unlit Power off or wait for USB connection going up. Blinking User data is going through USB port. USB Green Solid USB connection is OK . Unlit Power off or ADSL line connection is handshaking or training is in progress. Blinking User data is going through ADSL port. DSL Green Solid ADSL line connection is OK. Note: The[...]

Ch apter 2 : Insta ll at i on 3 Chapter 2 Installation Choosing a place for the ADSL Router  Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach it easily.  Avoid placing the device in places where people may walk on the cables. Also keep it away from direct sunlight or heat sources.  Place the device on[...]

AD S L Router User Manua l 4  Connect the supplied power adapter to the PW R port of your ADSL Router, and plug the other end to a power outlet.  Turn on the power switch. USB Driver Installation If the ADSL Router is connected to a PC through USB interface, you will be prompted for the USB drivers when plugging the USB cable to the PC. Refer[...]

Ch apter 2 : Insta ll at i on 5  Now, the system will copy the proper files for this router.  When the file copying finished, the dialog above will close. Now the USB driver is installed properly. You can use the router. For Windows XP  Run the USB installation program from the CD provided by your router package.  An InstallShield Wizar[...]

AD S L Router User Manua l 6  When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish.  Unplug the USB cable between your router and your PC. For Windows XP For uninstall the USB driver, please do the following.  Run the USB installation program from the CD provided by your router package. The Ins[...]

Ch apter 3 : C on fi gurat i on 7 Chapter 3 Configuration In order to access the Internet through the router, each host on your network must install/setup TCP/IP. Please follow the steps below for select a network adapter. Setting TCP/IP on Client PC To access the ADSL Router via Ethernet, the host computer must meet the following requirements: [...]

ADSL Router User Manual 8 For Windows 98 1. Click on the Start menu, point to Settings and click on Control Panel . 2. Double-click the Network icon 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click Add . Option 2: If you have TCP/IP protocol,[...]

Ch apter 3 : C on fi gurat i on 9 5. On the left side of the windows, highlight Mic rosoft and then select TCP/IP on the right side. Then click OK 6. When returning to Network window, highlight TCP/IP protocol for your NIC and click Properties . 7. On IP Address tab: Enable Specify an IP address option. Enter the IP Address : 192.168.1.x (x is betw[...]

AD S L Router User Manua l 10 8. When returning to Network window, click OK 9. Wait for Windows copying files. 10. When prompted with System Settings Change dialog box, click Yes to restart your computer.[...]

Ch apter 3 : C on fi gurat i on 11 For Windows ME 1. Click on the Start menu, point to Settings and click on Control Panel . 2. Double-click the Network icon. 3. The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click Add . Option 2: If you have TCP/IP[...]

AD S L Router User Manua l 12 9. Wait for Windows copying files. 10. When prompted with the System Settings Change dialog box, click Yes to restart your computer. For Windows NT 1. Click Start , point to Settings , and then click Control Panel . 2. Double-click the Network icon. 3. The Network window appears. On the Protocols tab, check out the lis[...]

Ch apter 3 : C on fi gurat i on 13 5. Click Yes to use DHCP. 6. Insert the Windows NT CD into your CD-ROM drive and type the location of the CD. Then click Continue . 7. Returning to the Network window, you will find the TCP/IP Protocol among the list. Select TCP/IP Protocol and click Properties . 8. Enable Specify an IP address option. Enter the I[...]

AD S L Router User Manua l 14 9. When returning to Network window, click Close . 10. When prompted with Network Settings Change dialog box, click Yes to restart your computer.[...]

Ch apter 3 : C on fi gurat i on 15 For Windows 2000 1. From the Start menu, point to Settings and then click Network and Dial-up Connections. 2. Right-click the Local Area Connection icon and then click Properties . 3. On the General tab, check out the list of installed network components. Option 1: If you have no TCP/IP Protocol, click Install . O[...]

AD S L Router User Manua l 16 4. Highlight Protocol and then click Add . 5. Click Internet Protocol (TCP/IP) and then click OK. 6. When returning to Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then click Properties. 7. Under the General tab, enable Use the following IP Address . Enter the IP address : 192.168.1[...]

Ch apter 3 : C on fi gurat i on 17 For Windows XP 1. From the Start menu, point to Control Panel and then click Network and Internet Connections . 2. Click Network Connection and then click Properties . 3. Click Network Connection and then click Properties .3. On the General tab, check out the list of installed network components. Option 1: If you [...]

AD S L Router User Manua l 18 Configure PC to get IP address from DHCP If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should configure the client PCs to obtain a dynamic IP address. Please follow the previous section to install TCP/IP component. Only that you do not need to specify an IP address when configuring TC[...]

Ch apter 3 : C on fi gurat i on 19 For Windows NT On the IP Address tab, click on the drop- down arrow of Adapter to select required adapter. Enable Obtain an IP address from a DHCP server and then click OK .. When prompted with the message below, click Yes to continue. For Windows 2000 Enable Obtain an IP address automatically and then click OK. F[...]

AD S L Router User Manua l 20 On the IP Address tab, select Obtain an IP address automatically . Then click OK . Renew IP Address on Client PC There is a chance that your PC does not renew its IP address after the ADSL Router is on line and the PC can not access the Internet. Please follow the procedures below to renew PC’s IP address. For Window[...]

Ch apter 3 : C on fi gurat i on 21 3. When the figure below appears, click Release and then Renew to get an IP address. For Windows NT 1. Select Run from the Start menu. 2. Select Run from the Start menu. 3. Type cmd in the dialog box and the click OK . 4. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 5. If you wan[...]

AD S L Router User Manua l 22 For Windows 2000 1. From the Start menu, point to Programs , Accessories and then click Command Prompt . 2. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 3. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ipconfig /renew to g[...]

Ch apter 4: We b C on fi gurat i on 23 Chapter 4 Web Configuration Using Web-Based Manager Once your host PC is properly configured, please proceed as follows: 1. Start your web browser and type the private IP address of the ADSL Router in the URL field: 192.168.1.1. 2. After connecting to the device , you will be prompted to enter username and pas[...]

AD S L Router User Manua l 24 Outline of Web Manager For configure the web page, please use admin as the username and the password. The main screen will be shown as below. Title : It indicates the title of this management interface. Main Menu : Includes Device Info, Quick Setup, Advanced Setup, Wireless, Diagnostics and Management. Main Window : It[...]

Ch apter 4: We b C on fi gurat i on 25 Quick Start Connect to Internet A quick way to connect to Internet by using PPPoE interface, click Connect to Inte rnet to open the web page. Enter the user name and password for your ADSL router and click Connect . The system will connect automatically. Quick Setup The quick setup wizard will guide you to con[...]

AD S L Router User Manua l 26 According to the ISP’s configuration on the server, you can choose PPPoE and PPPoA modes. If the ISP provides PPPoE service, the connection type selection will be decided as whether the LAN side device is running a PPPoE client or the router is to run the PPPoE client. This router supports both situations simultaneou[...]

Ch apter 4: We b C on fi gurat i on 27 Primary IP Address: Type in the first IP address that you got from your ISP for your LAN connection. Subnet Mask: Type in the subnet mask that you got from your ISP for your LAN connection. Configure the second IP Address and Subnet Mask for LAN interface: Check this box to make another set of IP Address and S[...]

AD S L Router User Manua l 28 Now, the system will reboot to activate the new settings that you have done in this section. Please wait for 2 minutes for restarting the router. MAC Encapsulated Routing (MER) If the type you choose is MAC Encapsulated Routing (MER), please refer to the following information. MER mode is used in business environment w[...]

Ch apter 4: We b C on fi gurat i on 29 you have to click on this button to invoke the following entries. Prefe rred DNS server: Type in your preferred DNS server that you got from ISP. Alternate DNS se rver: Type in the alternate DNS server that you got from ISP. Enable NA T: Check Enable NA T to enable this function. Please type in the W AN IP add[...]

AD S L Router User Manua l 30 You can check it at this time. If you find something is incorrect, click Back to change the settings. If everything is OK, click Finish to accept these settings. And the following page will appear. Now, the system will reboot to activate the new settings that you have done in this section. Please wait for 2 minutes for[...]

Ch apter 4: We b C on fi gurat i on 31 None: If it is not necessary to set the WAN IP address, please click this button. Obtain an IP address automatically: Click this button to make the system get an IP address automatically. W AN IP Address: Type in the IP address that you got from ISP for the W AN interface. W AN Subnet Mask: Type in the subnet [...]

AD S L Router User Manua l 32 PCs. Start IP Address: Type in the start point IP address. End IP Address: Type in the end point IP address. Leased Time: Type in the duration for the time. The default is 1day. You can check it at this time. If you find something is incorrect, click Back to change the settings. If everything is OK, click Finish to acc[...]

Ch apter 4: We b C on fi gurat i on 33 Primary IP Address: Type in the IP address that you got from your ISP for LAN interface. Subnet Mask: Type in the subnet mask that you got from your ISP for LAN interface. You can modify them if needed. Click Next for next step. You can check it at this time. If you find something is incorrect, click Back to c[...]

AD S L Router User Manua l 34 Status Overview This page is displaying the current status for the DSL connection.[...]

Ch apter 4: We b C on fi gurat i on 35 ADSL Line This page shows all information for ADSL. For knowing the quality of the ADSL connection, please click ADSL BER Test button to have advanced information. Click More Information to show more detailed information about ADSL Line Status. ADSL BER Test This test determines the quality of the ADSL connect[...]

AD S L Router User Manua l 36 Internet Connection This page displays the connection information for your router, such as PVC name, category, protocol, invoking NA T or not, IP address, link status and so on. Traffic Counters This table shows the records of data going through the LAN and W AN interface. For each interface, cumulative totals are disp[...]

Ch apter 4: We b C on fi gurat i on 37 This table shows the routing method that your router uses. ARP Table This table shows the IP address record for IP-to-Physical translation in your router.[...]

AD S L Router User Manua l 38 Advanced Setup LAN- IP Address This page is the same as you can see in the Configure LAN side Settings page while running the Quick Setup . It allows you to set IP Address and Subnet Mask values for LAN interface. Primary IP Address: Type in the first IP address that you got from your ISP for your LAN connection. Subne[...]

Ch apter 4: We b C on fi gurat i on 39 You can reserve one specific IP address for a certain PC for certain purpose. Simply add a mapping entry of MAC address & IP address for that PC by pressing the View Rese rved IP Address List button. The following picture will appear. Click the Add button to open another dialog as follows. On PCs MAC Addre[...]

AD S L Router User Manua l 40 Adding a New One To add a new W AN connection, please click the Add button. The following screen appears. VPI (Virtual Path Identifie r) : Identifies the virtual path between endpoints in an A TM network. The valid range is from 0 to 255. VCI (Virtual Channel Identifie r) : Identifies the virtual channel endpoints in a[...]

Ch apter 4: We b C on fi gurat i on 41 Destination Netwo rk Address: Display the IP address that the data packets are to be sent. Netmask: Display the subnet mask that the data transmitting is passing through. Gateway: Display the gateway that the data transmitting is passing through. W AN Inte rface: Display the interface that the data transmittin[...]

AD S L Router User Manua l 42 Other routers on the local LAN must use the Router’s Local Router as the Default Route. The entries will be the same as the Router’s local router, with the exception of the Gateway IP Address.  For a router with a direct connection to the Router’s local Router, the Gateway IP Address is the address of the Rout[...]

Ch apter 4: We b C on fi gurat i on 43 Version: It incorporates the RIP information when receiving and broadcasting the RIP packets. From the radio buttons, select a RIP version to be accepted, 1, 2 or both. Operation: There are two modes for you to choose, Active and Passive. Select Active for transmitting and receiving data, or select Passive for[...]

AD S L Router User Manua l 44 as illustrated below: (ftp://203. 7 0.212.52 ) IP Address seen by Internet Users Please note that, in the above picture, both Internet users are connecting to the same IP address, but using different protocols. To Internet users, all virtual servers on your LAN have the same IP Address. This IP Address is allocated by [...]

Ch apter 4: We b C on fi gurat i on 45 automatically when you select a service for using. You can type a new number if you want to do a customized service. Internal po rt fo r this service: The port number will be shown automatically when you select a service for using. You can type a new number if you want to do a customized service. Internal se r[...]

AD S L Router User Manua l 46 To activate a DMZ host, please type in the DMZ Host IP Address and click Apply . This feature allows one computer on your LAN to be exposed to all users on the Internet, allowing unrestricted 2-way communication between the specified IP address and other Internet users or Servers.  This allows almost any application[...]

Ch apter 4: We b C on fi gurat i on 47  port To keep track of the performance of IP Filter, a logging device is used which supports logging of the TCP/UDP and IP packet headers and the first 129 bytes of the packet (including headers) when a packet is successfully passed through, a packet is blocked from passing through and it matches a rule set[...]

AD S L Router User Manua l 48 For the item which passes through the diagnostics, a PASS word will be shown on the right side of that item. If not, a Fail word will be there. N/A means that item is not necessary for the system to test. The Help link lets you know what the result (Pass, Down, Fail) represents for. In this page you still can rerun dia[...]

Ch apter 4: We b C on fi gurat i on 49 Management Access Account This page allows you to type in the password for accessing into your DSL Router. For the Admin Account , the default setting for user password is admin . If you want to change the username and the password, please retype the new password in the Confirm field for confirmation. Then cli[...]

AD S L Router User Manua l 50 Update: Click this button to refresh the current time. Set Time by: The default setting is Manual. If you select Time Server, you don’t need to type in the time setting manually. The system will set automatically. Time: Set the start time by typing the year, the month, the day, the hour, and the date to help the rout[...]

Ch apter 4: We b C on fi gurat i on 51 There are 8 types for log level and display level for your choose. The default is Debugging . The mode selection includes Local , Remote and Both . The default one is Local. If you choose Remote or Both , all the events will be sent to the specified UDP port of the specified log server. Viewing System Log For [...]

AD S L Router User Manua l 52 management station and agents are linked by a network management protocol that is SNMP. The SNMP includes three key capabilities, get, set and trap. A single management station can handle many agents as long as SNMP remains relatively “simple”, so the number can be high (hundreds or so). The following picture is th[...]

Ch apter 4: We b C on fi gurat i on 53 To backup your configuration for the router to your computer, you can use Backup Config web page to save the settings. And when you want to restore the settings in the future, simply open Backup Config web page and use Browse button to located the file and click Restore . Update Firmware If you have to or want[...]

AD S L Router User Manua l 54 UPnP for XP Universal plug and play (UPnP) is an architecture for pervasive peer to peer network connectivity of intelligent appliances and PCs of all form factors. It is designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, publi[...]

Ch apter 4: We b C on fi gurat i on 55 new virtual server automatically for mapping while the router detecting the computer running some Internet applications.[...]

Ch apter 5: C onnect i on Mo d e 56 Chapter 5 Connection Mode Prior to configuring the ADSL Router, you must decide whether to configure the ADSL Router as a bridge or as a router. This chapter presents some deployment examples for your reference. Each mode includes its general configure procedures. For more detailed information about web configura[...]

Ch apter 5: C onnect i on Mo d e 57 PPP over ATM (PPPoA) Mode RDAIUS Serve r AAA BRAS STM-1 DSLAM Loop Dynamic P ublic IP assigned by BRAS PPPoA+NAT+DHC P on Priva te LAN Hub ADSL Router Ethernet PC(S) 192.168.1.3 192.168.1.2 PPP over ATM Default Private I P 192.168.1.1 ISP (Internet Service Provi d er) *BRAS: Broadb and Remote A ccess Se rver Desc[...]

AD S L Router User Manua l 58 PPP over ATM (PPPoA) IP Extension Mode RDAIUS Serve r AAA BRAS STM-1 DSLAM Loo p PPPoA+NAT+DHC P on Priva te LAN Hub ADSL Router Ethernet PC PPP over ATM Default Private I P 192.168.1.1 ISP (Internet Service Provi d er) *BRAS: Broadb and Remote A ccess Se rver Dynamic Public IP assigned by BRAS Description: In this dep[...]

Ch apter 5: C onnect i on Mo d e 59 PPP over Ethernet (PPPoE) Mode RDAIUS Server AAA BRAS STM- 1 DSLAM Loo p Dynamic Publ ic IP assigned by BRAS PPPoE+NAT+DHCP on Priv at e LAN Hub ADSL Router Ethernet PC(S) 192.168.1.3 192.168.1.2 PPP over Ethernet Default Private IP 192.168.1.1 *BRAS: Broadband Remote Access Server ISP (Internet Service Provid er[...]

AD S L Router User Manua l 60 PPP over Ethernet (PPPoE) IP Extension Mode RDAIUS Server AAA BRAS STM-1 DSLAM Loop Dynamic Public IP assigned b y BRAS PPPoE IP Extension Mode Hub ADSL Router Ethernet PC(S) PPP over Ethern et Default Private IP 192.168.1 . 1 *BRAS: Broadband Remote Access Server ISP (Internet Servi ce Provi de r) Description: In this[...]

Ch apter 5: C onnect i on Mo d e 61 MER RDAIUS Server AAA BRAS STM-1 DSLAM Loop Public IP assigned by B R AS Hub ADSL Router MER *BRAS: Broadband Remote Access Server Default Private IP 192 .16 8.1. 1 ISP (Internet Serv ice Provider) Ethernet PC Description: In this deployment environment, we make up a private IP network of 192.168.1.1. NA T functi[...]

AD S L Router User Manua l 62 Numbered IP over ATM (IPoA) RDA IUS Server AAA BRAS STM-1 DSLAM Loop Public IP Pre-assigned by IS P Hub ADSL Rout er PC(S) IP over ATM S/W Default Private IP 192.168.1.1 *BRAS: Broadband Remote Access Server ISP (Internet Service Provider) 10. 3.75. 49 10. 3.75. 51 10. 3.75. 50 10. 3.70. 1 Description: If you apply for[...]

Ch apter 5: C onnect i on Mo d e 63 8. Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg: IP Address: 10.3.75.51 Subnet Mask: 255.255.255.248 Gateway: 10.3.75.49 9. Now the router is well configured. You can access into Internet.[...]

AD S L Router User Manua l 64 Numbered IP over ATM (IPoA)+NAT RDAIU S Server AAA BRA S STM-1 DSLAM Loop Public IP Pre-a ssigned by ISP+NAT Hub ADSL Router PC(S) IP over ATM S/W Default Private IP 192. 168.1.1 *BRAS: Broadband Remote Access Server ISP (Internet Service Provider) 10.3. 75.49 10.3.75. 51 10.3. 75.50 10.3.70 .1 Description: In this dep[...]

Ch apter 5: C onnect i on Mo d e 65 Secondary IP Address : 10.3.75.49 Subnet mask : 255.255.255.248 8. Check the network information. Make sure the settings match the settings provided by ISP. Click Finish . 9. Now the router is well configured. You can access into Internet.[...]

AD S L Router User Manua l 66 Unnumbered IP over ATM (IPoA) RDAIUS Se rver AAA BRAS STM-1 DSLAM Loop Public IP Pre-assigned by ISP Hub ADSL Router PC(S) IP over ATM S/W Default Private IP 192.1 68.1.1 *BRAS: Broadband Remote Access Server ISP (Internet Service Provider) 10.3.75 .49 10.3.75. 51 10.3.75.50 Description: If you apply for multiple IP ad[...]

Ch apter 5: C onnect i on Mo d e 67 9. Now the router is well configured. You can access into Internet.[...]

AD S L Router User Manua l 68 Unnumbered IP over ATM (IPoA)+NAT RDAIU S Server AAA BRA S STM-1 DSLAM Loop Public IP Pre-a ssigned by ISP+NAT Hub ADSL Router PC(S) IP over ATM S/W Default Private IP 192. 168.1.1 *BRAS: Broadband Remote Access Server ISP (Internet Service Provider) 10.3. 75.49 10.3.75. 51 10.3.75.50 Description: In this deployment en[...]

Ch apter 5: C onnect i on Mo d e 69 8. Check the network information. Make sure the settings match the settings provided by ISP. Click Finish . 9. Now the router is well configured. You can access into Internet.[...]

AD S L Router User Manua l 70 Bridge Mode RDAIUS Server AAA BRAS STM-1 DSLAM Loop Bridge Mode Hub ADSL Router PPPoE Client S/W PC(S) PPP over Ethernet Default Private IP 192.168.1.1 *BRAS: Br oa dband Remote Access Server ISP (Internet Service Provider) Description: In this example, the ADSL Router acts as a bridge which bridging PC IP address from[...]

Ch apter 5: C onnect i on Mo d e 71[...]

Ch apter 6 :Trou bl es h oot i ng 72 Chapter 6 Troubleshooting If the suggested solutions in this section do not resolve your issue, contact your system administrator or Internet service provider. Problems with LAN PCs on the LAN can not get IP addresses from the ADSL Router. The chances are that the interface used as DHCP server is modified and th[...]

Ch apter 6 : T rou bl es h oot i ng 73 Relay from 168.95.1.1 bytes=32 time=100ms TTL=253 Then the connection to the DNS is OK. If you get a failed ping with the response of: Request time out Then the DNS is not reachable. Check your DNS setting on the ADSL Router.[...]

Ch apter 7: Gl ossary 74 Chapter 7 Glossary ARP ( Address Resolution Protocol ) ARP is a TCP/IP protocol for mapping an IP address to a physical machine address that is recognized in the local network, such as an Ethernet address. A host wishing to obtain a physical address broadcasts an ARP request onto the TCP/IP network. The host on the network [...]

Ch apter 7 : Gl ossary 75 If the IP addresses given by your ISP are not enough for each PC on the LAN and the ADSL Router, you need to use NAT. With NAT, you make up a private IP network for the LAN and assign an IP address from that network to each PC. One of some public addresses is configured and mapped to a private workstation address when acce[...]

AD S L Router User Manua l 76 cells belonging to the same connection can be distinguished. A unique and separate VPI/VCI identifier is assigned in advance to indicate which type of cell is following, unassigned cells, physical layer OAM cells, metasignaling channel or a generic broadcast signaling channel. Your ISP should supply you with the values[...]

Ch apter 7 : Gl ossary 77[...]

Appen di x: S pec ifi cat i ons 78 Appendix Specifications Software For Annex A  ANSI T1.413 Issue 2  ITU G.992.1 Annex A (G.dmt)  ITU G.992.2 Annex A (G.lite)  ITU G.994.1 (G.hs)  Support dying gasp ADSL Compliance For Annex B  ITU G.992.1 Annex B (G.dmt)  ITU G.994.1 (G.hs) A TM Features  Compliant to A TM Forum UNI 3.1 / [...]

Appen di x: S pec ifi cat i ons 79 servers (e.g., Web, FTP, Mail servers) on user’s local network.  Support DMZ  UPnP IGD (Internet Gateway Device) with NA T tra versal capability  Static routes, RFC1058 RIPv1, RFC1723 RIPv2.  DNS Relay  ARP Proxy Security Features  PAP (RFC1334), CHA P (RFC1994) for PPP session  Firewall sup[...]

AD S L Router User Manua l 80[...]