Intellinav UM_IN-KIG02-112706.QXD manuel d'utilisation

Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 2[...]

1 Intellinav 3 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Mounting the Intellinav System . . . . . . . . . . . . . . . . .5 Starting Intellinav . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Getting GPS Signal . . . . . . .[...]

2 Intellinav 3 User’ s Manual Shuffle Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Repeat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Playback Volume . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Photo V iewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Full Screen Mode [...]

3 Intellinav 3 Congratulations on your purchase of the Intellinav 3 system. Y our Intellinav system can guide you to the destination of your choice using signals from Global Positioning Satellites (GPS) orbiting the earth. There ar e 24 GPS satellites orbiting the earth. A GPS device can calculate your position on the earth if it can receive signal[...]

4 Intellinav 3 User’ s Manual Basic Operation *The USB feature has been disable SD Card Slot Battery On/Off Speaker (rear) Reset Button Headphone Jack V olume (+/-) LED *D C I n Standby Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 6[...]

5 Intellinav 3 Mounting on the Windshield 1. Clean the surface of the windshield using rubbing alcohol. 2. Press the suction cup firmly against the windshield. 3. Press down the lever to fix the suction cup in place. NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOT A: State law prohibits drivers in California (CVC 26708(a)) and Minnesota (169.71, Minne[...]

6 Intellinav 3 User’ s Manual Press the Standby button. If the Battery On/Of f switch on the bottom of the system is in the Off position, set it to On first. Ta p Navigation . A warning screen appears. Ta p I Agree after you have read and agr eed to the warning. The map view appears and you are ready to set your first destination! Getting GPS Sig[...]

7 Intellinav 3 GPS Information To view the GPS information: 1. T ap Menu 2. T ap Information . 3. T ap GPS Information . The GPS Information screen appears. Entering Data on the Intellinav System The Intellinav system doesn't have a physical keyboard. Instead, you tap the screen to enter data. When you ar e entering data, a screen containing t[...]

8 Intellinav 3 User’ s Manual The Intellinav system gives you many ways of looking at the map. Y ou can see your current position, view any of the turns on a route, or pan the map to view other areas. Y ou can zoom in and out, and find information about specific locations. Map View The map view on the Intellinav system shows your current location[...]

9 Intellinav 3 3D Map View Y ou can change the perspective of the map display to 3D or bird’ s eye view . To change to 3D view: 1. T ap Menu . The Main Menu appears. 2. T ap Settings . The Settings screen appears. 3. T ap Display Options . The Display Option screen appears. 4. Select from 2D, High, Medium and Low , which repr esents the inclinati[...]

10 Intellinav 3 User’ s Manual From the Information screen you have several options: Set Start Location Set Stopover (with an existing route) Set Destination Save This Location Information Setting the location as a starting point is useful if you are trying to find the distance between two locations. Setting the location as your destination is a [...]

11 Intellinav 3 Y ou can set a destination with the Intellinav system many differ ent ways. Once you have set a destination, you can add a detour or a stopover . The Intellinav system also offers an Itinerary featur e, where you can enter up to 100 destinations and use the Itinerary screen to r e-order destinations as you like. Setting a Single Des[...]

12 Intellinav 3 User’ s Manual 2. T ap Destination . The Set Destination screen appears. 3. T ap Address . The Input Method screen appears. 4. If you need to change the region: a. T ap Change State . The Enter State Name screen appears. b. T ap the Letters to enter the name of the region or State, or tap the name in the list. c. T ap OK when you [...]

13 Intellinav 3 6. T ap the Letters to enter the name of the City . T ap OK when you have selected the City . The Enter Street Name scr een appears. 7. T ap the Letters to enter the name of the street. Ta p OK when you have selected the street. The Enter House Number screen appears. 8. T ap the Numbers or Letters A-D to enter the house number . T a[...]

14 Intellinav 3 User’ s Manual The Select Address scr een appears. 8. Select the intersection that matches the location you want to go to and tap Nav . The map appears, and the guidance directions begin. To enter an intersection as a destination using City First: 1. T ap Menu . The main menu appears. 2. T ap Destination . The Set Destination scre[...]

15 Intellinav 3 Using a Point of Interest (POI) as a Destination There ar e over 6 million points of interest that you can select as a destination. Generally , you choose a category and then choose one of four methods of selecting the specific point of interest. Sometimes you must first select a subcategory before you can choose a selection method.[...]

16 Intellinav 3 User’ s Manual To select a nearby POI from an alphabetical list: a. T ap Alphabetical . The Enter POI Name screen appears. b. T ap the Letters to enter the name of the POI. c. T ap OK when you have selected the POI. The POI Select screen appears, displaying the address of the POI. d. T ap Nav . The map appears, and the guidance di[...]

17 Intellinav 3 To select from all POIs in a region or State: 1. T ap List All . The Enter POI Name screen appears. 2. T ap the Letters to enter the name of the POI. T ap OK when you have selected the POI. The POI Select screen appears. 3. T ap Nav . The map appears, and the guidance directions begin. To select a POI by city: 1. T ap By City . The [...]

18 Intellinav 3 User’ s Manual Using a Recent Destination as a Destination Recent destinations are locations you have navigated to recently . Y ou can easily select one of these locations as a destination. Managing your recent destinations list is covered later in this section. To select a destination from your list of recent destinations: 1. T a[...]

19 Intellinav 3 To select from an alphabetical list: a. T ap Alphabetical . The Enter City Name screen appears. b. T ap the Letters to enter the name of the city . T ap OK when you have selected the city . The City Center screen appears. c. T ap Nav . The map appears, and the guidance directions begin. To select by distance: a. T ap By Distance . T[...]

20 Intellinav 3 User’ s Manual Detours, Avoid Roads, and Stopovers The Detour feature will allow you to bypass a certain portion of the route starting at your pr esent position, while avoid road allows you to bypass the entir e road. Stopovers are stops you add to a trip to make prior to reaching your destination. Detour NOTE: you cannot create a[...]

21 Intellinav 3 Avoid Road Once you have set a destination you can look at the list of streets and determine if you need to mark one or more as unavailable. If you mark a section as unavailable the Intellinav system will calculate a new route that avoids the section you marked. NOTE : Y ou cannot avoid a road if you do not have a current destinatio[...]

22 Intellinav 3 User’ s Manual Stopover Once you have set a destination you can add a stopover . Adding a stopover does not cancel your original destination. Once you reach your stopover , you will be prompted to continue to the original destination. To create a stopover: 1. Press Menu . The main menu appears. 2. T ap Destination . The Destinatio[...]

23 Intellinav 3 Setting an Itinerary The Itinerary feature allows you to set multiple destinations. Y ou can add, remove, or re-or der destinations according to your needs. To set the Itinerary: 1. T ap Menu . The main menu appears. 2. T ap Itinerary . The Itinerary screen appears. 3. T ap Add to add new destinations from Favorites, Recent or POI l[...]

Y ou can edit the destinations you add to your Favorites list to give them descriptive names. Y ou can also remove destinations from your favorites list. To manage your favorites list: 1. T ap Menu . The main menu appears. 2. T ap Favorites . The Favorites screen appears. To edit a favorite: a. T ap on the favorite you want to edit. b. T ap Edit. T[...]

25 Intellinav 3 To access the Information screen: 1. T ap Menu . The main menu appears. 2. T ap Information . The Information screen appears. 3. Select from the following: Route List Provides detailed turn-by-turn maneuver infor mation of your current r oute. If you have not set a destination, the route list will be empty . Current Location Provide[...]

26 Intellinav 3 User’ s Manual Trip Information Provides information such as average speed and distance traveled. This feature is convenient when you need to keep track of your mileage. Almanac Provides information related to the sun and the moon, based on your current geographic location. System Information Provides softwar e revision number and[...]

27 Intellinav 3 T raffic pattern is a database of typical hour -by-hour traffic speeds on over 170,000 miles of primary and secondary roads acr oss major US cities. Historical observations from GPS probe data ar e aggregated and verified to provide higher quality routing based on likely traf fic flow at the time of your departure, especially during[...]

28 Intellinav 3 User’ s Manual Arrival and Departure Time Calculation Using T raffic Pattern, you can calculate the arrival and departure time based on traf fic condition at certain time of day and day of week. For example, if you want to leave at certain time, you can estimate the time of arrival at your destination. Conversely , if you want to [...]

29 Intellinav 3 Parked-car Locator This feature is useful when you park your car in a lar ge open area such as inside a theme park, or on a str eet nearby a tourist attraction or shopping center . To save your parking location: 1. Press the Standby button on the top of Intellinav 3, after you have parked your car . 2. T ake the Intellinav 3 with yo[...]

30 Intellinav 3 User’ s Manual Y ou can set many different options to customize the Intellinav system and make it work your way . These options include: Route Options Display Options Language Options Localization Options System Options Safety Options Display Options The display options give you control over the appearance of the map. Y ou can cha[...]

icons are displayed. If you choose custom, you can choose which categories of POI icons you want displayed. The color settings control the backgr ound color of the map. Y ou can choose from four differ ent colors. The 3D view settings control your view of the map. Of f shows you the map in traditional 2D mode. High, Medium, and Low show you a 3D ve[...]

32 Intellinav 3 User’ s Manual Route Options The route options give you contr ol over the navigation of your trip. Y ou can change the following: Method Ferries T oll Roads Carpool Tu r n s There ar e six method settings. Quickest calculates the route that should take the least amount of time. Major calculates a route that uses major r oads whene[...]

33 Intellinav 3 To set your route settings: 1. T ap Menu . The main menu appears. 2. T ap Route Options . The Route Options screen appears. 3. T ap your Method preference: Quickest , Major , Shortest , Local, Pattern or Walking . 4. T ap your Ferries preference: Include or Exclude . 5. T ap your T oll Roads preference: Include or Exclude . 6. T ap [...]

To set the speed alert: a. T ap Auto . A warning appears. b. T ap Confirm to close the warning. c. T ap OK . Y ou return to the map. To set a fixed speed alert: a. T ap Fixed . b. Enter the speed you want to use as a maximum speed. c. T ap OK to set the speed. d. T ap OK . Y ou return to the map. Fog Assist One of the hazzards of driving in dense f[...]

Language Options The language options allow you to configure the following: Language TTS (T ext-to-Speech) There ar e six language settings. When you change the language, all of the screen names and contr ols will be in the selected language. To set your language settings: 1. T ap Menu . Menu screen appears. 2. T ap Settings . Settings screen appea[...]

36 Intellinav 3 User’ s Manual Localization Options The localization options give you control over the settings affected by your location, including: Time Zone Daylight Savings Time Units There ar e six time zone settings, for all areas of the United States. There ar e two daylight-savings options, to determine whether or not daylight savings tim[...]

Screen Calibration This process ensur es that when you tap the screen, the item tapped is activated. To calibrate the screen: 1. From the Main Menu, tap on System and then System Info. 2. T ap on Calibration. 3. T ap the center of the cross as it moves around the screen. Y ou will need to do so one time for the center and then for each corner of th[...]

38 Intellinav 3 User’ s Manual Vo l u m e To set the system sound level: 1. T ap - /+ to adjust the volume level. 2. T ap to apply the changes made. To enable tap sounds: 1. T ap the "Enable sound for tap" check box. 2. T ap to apply the changes made. T ap to set the screen backlight level and enable its auto off function. T ap to adjus[...]

Backlight To set the screen backlight level: 1. T ap -/+ to adjust the screen backlight level. 2. T ap to apply the changes made. To set the screen backlight auto-off function: 1. T ap -/+ next to the Battery and Exter nal Power settings. Options include: Always On, after 10 seconds, after 30 seconds, after 1, 2 or 3 minutes. 2. T ap to apply the c[...]

40 Intellinav 3 User’ s Manual Factory Reset To perform a soft reset: 1. Hold the device securely , and then press the soft reset button on the bottom of your device. T o load the factory default setting If you still encounter problems even after soft r esetting the device, loading the factory default settings may correct the pr oblems. These def[...]

To Reset the GPS: 1. Close the navigation program, if it is currently running, by tapping on Menu in the map display , and then Exit in the navigation Menu screen. 2. T ap System on the Main Menu panel. 3. T ap System Info on the System panel. 4. T ap GPS Reset and then Y es to confir m. 5. The GPS Reset process will take about a minute to complete[...]

42 Intellinav 3 User’ s Manual you can use a computer to load MP3 onto an SD card and then load that sd card into the SD card slot located at the side of the system. To open the MP3 Player: 1. T ap MP3 on the Main Menu panel. The MP3 player appears. To open MP3 files for playback: 1. T ap the Folder button to open the file browser . The program w[...]

Shuffle Mode Each directory containing supported music files is considered a playlist. Y ou can choose to shuffle the playback sequence to play files in random order . To rearrange the playback sequence: 1. T o enable the Shuffle mode, tap (Random). An enabled Shuffle mode is indicated by the wor d "Random" on the playback display , and a[...]

44 Intellinav 3 User’ s Manual With the Intellinav system, you can keep images of your favorite moments as mobile as you are by using the Photo Viewer . Y ou can use a computer to load pictures onto an sd card and then load that sd card into the SD card slot located at the side of the system. The program features: Support for JPEG and BMP (1-, 4-[...]

Full Screen Mode In Full Screen mode, image files can be viewed in a larger scale. Y ou can also change its orientation angle. To view images in Full Screen mode: 1. Search for the file you want to view . 2. T ap / to scroll thr ough all available files. 3. T ap Up-One-Level to return to the device's root directory . 4. Open the file in Full S[...]

46 Intellinav 3 User’ s Manual Slide Show Y ou have the option to view images in a slide show much like viewing a presentation. Images ar e adjusted to fit the entire display ar ea and are shown in a 3-second interval. To enable the Slide Show mode: 1. In Thumbnail or Full Screen mode, tap (Slide Show). 2. T ap the touch screen to stop the slide [...]

FCC Declaration of Conformity T ested to comply with FCC standards for home or of fice use This equipment complies with Part 15 of the U.S Federal Communications Commission (FCC) Rules. Operation of this device may not cause harmful interference, and this device must accept any interference r eceived, including interference that may cause undesir e[...]

48 Intellinav 3 User’ s Manual The mapping and navigation software ("Softwar e") and map data ("Data") is provided for your personal, internal use only and not for resale. It is pr otected by copyright, and is subject to the following terms and conditions which are agr eed to by you, on the one hand, and Netropa ("LICENSE[...]

NUANCE (T ext-T o-Speech) END USER LICENSE AGREEMENT 49 Intellinav 3 a. License Grant. Netropa grants to End User a non- exclusive, non-transferable right and license to use the Nuance Software on a single Netr opa Product. b. Ownership of Nuance Software. End User acknowledges that NETROP A and its licensors and/or suppliers retain all right, titl[...]

50 Intellinav 3 User’ s Manual License Grant Y ou may use one copy of the enclosed Software and Data on a single computer , with a single CPU, and a Windows CE device. Y ou may not network the Software and/or Data or otherwise use it on more than one computer or mobile computer at the same time. Y ou may use Software and Data to pr ovide you with[...]

51 Intellinav 3 No W arranty This Data is provided to you "as is," and you agr ee to use it at your own risk. LICENSEE and its licensors (and their licensors and suppliers) make no guarantee, repr esentation or warranty of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality , accuracy [...]

52 Intellinav 3 User’ s Manual agreement between LICENSEE (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agr eements previously existing between us with r espect to such subject matter . Governing Law The above terms and con[...]

53 Intellinav 3 Netropa (the Company) warrants to the original r etail purchaser of this pr oduct that should this product or any part thereof, under normal use and condition, be proven defective in material or workmanship within one year from the date of original pur chase, such defects will be repair ed or replaced with new or reconditioned parts[...]

54 Intellinav 3 User’ s Manual Please use only the power adapter included in the box and connects to the voltage requir ement indicated on the rear panel of the pr oduct. Use of any other types of chargers will r esult in malfunction of the device and void all warranties. Do not use and/ or charge this device near water or moisture. Never touch o[...]

55 Intellinav 3 When using Intellinav 3, please make sure you ar e operating the device in compliance with all local, state, and federal regulations. It is the sole r esponsibility of the driver of the vehicle to operate the vehicle in a safe manner and not become distracted by Intellinav . User should not operate the controls of Intellinav while y[...]

56 Intellinav 3 User’ s Manual affixing and or applying any objects such as suction mounts on the windshields. Other dashboard or friction mounting options should be used. Intellinav does not take any responsibility for any fines, penalties, or damages that may be incurred as a r esult of disregarding this notice. California V ehicle Code Section[...]

57 Intellinav 3 The Intellinav 3 has the following specifications: SiRF Star III GPS chipset SAMSUNG S3C2412 266Mhz CPU 64 MB NAND flash + 64 MB SDRAM onboard 3.5-inch 16.7M Colors TFT LCD with touch panel SD memory slot for map data, MP3, or photos Built-in 1 watt speaker Built-in GPS antenna WinCE 5.0 OS Ker nel Up to 3 hours Battery Life (Rechar[...]

58 Intellinav 3 User’ s Manual Netropa Corporation 1499 Huntington Dr . Suite 305 South Pasadena, CA 91030 Office 888.628.0663 http://www .intellinav .com Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 60[...]

Copyright © 2007 Netr opa Corp. http://www .intellinav .com All rights reserved. Part number#IN-QIG03 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 1[...]