Intplus Network Video Server FlexWATCH 3110 manuel d'utilisation

Network Video Server User’s Manual Seyeon Tech Co., Ltd User’s Guide FlexWATCH TM 3110 (Version. 3.0_Rev0) Seyeon Technology Co., Ltd www .flexwatch.com www.intplus.es - INTPLUS [2005] -[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 2 - INTPLUS [2005] -[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 3 Table of Contents Overview of FlexWATCH TM Server .......................................................... 10 1 Pa cking List .............................................................................................. 10 2 What is FlexW A TCH TM ? .....................................[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 4 1.1 ActiveX based simpl e view .................................................................. 33 1.2 Jav a Applet ba sed live view ................................................................ 34 1.3 Live view page g uide .............................................................[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 5 2 PPP oE Confi gurati on .................................................................................. 53 3 Network port co nfi gurati on ......................................................................... 54 3.1 HT TP port co nfig urati on ......................................[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 6 3 Alarm input devi ce connect i on .................................................................... 75 4 Alarm Output(R elay outp ut) dev i ce co nnectio n .............................................. 75 4.1 Alarm output devi ce connecti on ...........................................[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 7 2 Re boot .................................................................................................... 99 3 F actory Default ......................................................................................... 99 4 System Update ................................................[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 8 Notice • The material in th is docu ment is for information on ly and is subject to change without notice. While reasonable effort s have been made in the prepar ation of this docu ment to assure its accura cy , Seyeon T ech assumes no liability resulting from errors or omissions in this[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 9 Warning T o prevent risk of electric shock, Do not remov e system-case. No user serviceable parts inside. Any repair or modification for the produ ct will be allowed to qualif ied service personal only . Do not expose this app liance to water or moisture. Do not install this product in Haz[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 10 Overview of FlexWATCH TM Server 1 Packing List Please check and make sure following items are included i n your package without any missing items. If there are any missing items, please refer to your local distri butor . A. FlexW A TCH TM 3110..……………………………………?[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 11 2 What is FlexWATCH TM ? The FlexWA TCH TM server is the Network Video Server , which transmits digital images captured by Analog CCD camera over the Internet. So users can view real-time live images over the Internet at anytime and anywhere using the standard web browser such as MS Inter[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 12 2.2 Product Specification Hardware · 32bit Embedded CPU · Flash 4Mbytes /SDRAM: 32Mbytes · Hardware Motio n JPE G engine · Linux version 2.4.xx operating s y stem System Requirem ents · OS : Windows 95/98/2000/XP/ NT/ ME, Linux, Mac, Unix, Linux Operat ion system. · Browser : MS Int[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 13 · Dynamic IP support through AOI P 2.3 Basic Network Connection Diagram FlexW A TCH TM server provides flexible connectivity with any type of networks available around you such as Leased line, Cable modem, xD SL line and PSTN (POT) line. Thus, it can be installed either in LAN or W AN en[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 14 2.3.3 Dynamic IP address from Cable or xDSL line FlexW A TCH TM server can be installed on even Dyna mic IP network. But it needs to be registered in AOIP server which is an IP gateway running by Flexwatch.com or your local Distributor . F or more details, please refer to T echnical guide[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 15 your local Phone line based Internet conn ection. 2.3.5 Dial-in to FlexWA TCH TM server through PSTN line Y ou can make a call to FlexW A TCH TM server from anywhere and at anytime. But i f you are concerned about call charge, we are recommending using above connection. 2.4 Application Un[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 16 B. ITS (Inte lligent T raffic S ystem) for real time moni toring C. IBS (Intelligent Bu ilding System) using FlexWA TCH TM Manager D. Internet broadcasting E. School, Kindergarten, Nursery , Fr anch ised R estaurant & convenient store. F . F acility monitorin g - INTPLUS [2005] -[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 17 3 Hardware Description • This chapter contain s list of items to be prepared for th e installation of FlexWA TCH TM server . • Please carefully read this chapter before th e installation. • Please prepare all the necessary items before start installation to prevent any possible malf[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 18 Menu Description A DC12V DC 12V power B LAN LAN P ort for 10/100M Base T A uto sensing C COM RS-232 port for serial inpu t device, V oice kit, PTZ. Console for Hyper Terminal must be connected to this port only . D LAN LED Blinking on ly when LAN is connected to the network Green-light on[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 19 IP assignment 1 Key Words for Network LAN (Local Area Networ k) : Under the LAN net work, any network device in the same LAN network can be accessed by any other ne twork device. But LAN network can not be accessed from the Internet (W AN). Most of case, LAN is built after Router wh ich i[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 20 Dynamic IP ad dress : A dynamic IP addres s is an IP address that is automatically assigned to a client stat ion (computer , network equipment, etc.) in a T CP/IP network. Dynamic IP address is typically assigned by a DHCP server , which can be a computer on the network or another piece o[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 21 LAN is neve r transmitte d on the Internet. AOIP (Always On Int ernet Pr otocol) Server : AOIP™ server (Alwa ys On IP) is run by Seyeon T echnology or its business partner an d is a gateway for remote users to access FlexWA TCH ™ servers which is connected dyna mic IP address over DSL[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 22 network. C:> ipconfig Windows 2000/XP IP Configuration Ethernet adapter Local area connection : Connection-specific DNS Suffix . : IP A ddress. . . . . . . . . . . . : 192.168.0.158 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 C:[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 23 Reply from 192.168.0.155: bytes=32 time=10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 Reply from 192.168.0.155: bytes=32 time<10ms TTL=128 2.1.2 DHCP Enabled PC If your PC i s set to use DHCP , you need to c[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 24 over cable. 2.2.1 LAN Cable Environment If your PC is connected to network throug h L AN cable, you need to connect FlexW A TCH TM server to LAN port of H ub or Route r . 2.2.2 Cross-over cable If LAN network is not av ailable, you can directly connect FlexW A TCH TM serv er to your PC th[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 25 2.3 PC Environment Check out whether your PC is conn ected to LA N or WA N network or stand-alone. If stand alone, you need to use Cross-o ver cable or build up LA N environment to use LAN cable. 3 Factory Default Please refer to the following fac tor y defaul ts to change setting up. Fac[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 26 Y ou can use IP Installation Wizard Program through following step . ( IPInstallationWizard.exe is provide in the product CD ) Preset a PC with Microsoft Windows O/S. 1) Connect FlexW A TCH TM server into the netw ork (Hub) that your PC belon gs to. 2) Run the IP installation Wiz ard prog[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 27 IP Address Input an IP address to be assigned to FlexW A TCH TM server Note that the IP must be directly connectable with user’ s PC. The above IP ’10.10.22 5.100’ is only an example. C IP , Subnet, Gateway Whether to change IP , Subnet and Gate or IP and Subnet mask only . D ‘ Se[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 28 8) Click “Save IP Address” button to save IP- Address in the Flash Memory . 9) Click “Go to Home P age” butto n to access to FlexW A TCH TM W eb browser . 10) F or server configuration, click “ Admin ” Icon and Input User ID and P assword (F actory de fault is root : root ) to[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 29 4) Select the connected C OM port with serial cable and press OK button. 5) When ‘P ort Setti ngs’ wi ndow sho w up , in put each v alues from the table bel ow . Serial Port Settin gs Value Bits per Second 115200 Data bits 8 Par it y None - INTPLUS [2005] -[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 30 Stop bits 1 Flow control None 6) After setting Hyper T erminal, press Enter key several times and then yo u can see messages as below . Input Login ID and P assw ord. (F actory defaults for Admin ID and Password ar e root/root.) Seyeon Tech Co., Ltd. 2001-2003 Linux Kernel 2.4.20-syl1 Fle[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 31 Enter IP Address : 10.10.213.22 Enter Network Mask : 255. 255.0.0 Enter Gateway : 10.10.1.1 Entered network configuati on IP Address : 10.10.213.22 Network Mask : 255.255.0.0 Gate way : 10.10.1.1. Do you wish to apply your new net work configuration ? (y/n/q): y 10) If following messages [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 32 Bash# ifconfig eth0 Link encap:Ethernet HWaddr 00:30:6F:81:00: AE inet addr : 10.10.213 .22 Bcast:10.10.255.255 Mask : 255.255.0.0 UP BROA DCAST RUNN ING MULTICA ST MTU:1500 Metric:1 RX packets:6382 e rrors:0 dropped:0 overruns:0 frame:0 TX packets:294 erro rs:0 dropped:0 overruns:0 carri[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 33 Live view & Camera Configuration Once IP assignment is f inished, you can view live view thr ough standard web browser such as MS Internet Explorer or Netscape Navigator . There are two different type of view ing option provided by FlexW A TCH TM server . One is simple live view and t[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 34 When the Client pc is not connected to In ternet, you need to manually install Act iveX components in your view ing PC. - Insert the product CD in your PC - Select “FlexWA TCH TM Simple Viewer control” progr am -  Application idea ActiveX based SDK is provided for software develope[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 35 screen, snapshot, PT Z cont rol, Relay output control, V oice kit connection as well. Cam Control : By checking the camera yo u can get any nu mb er of camera displayed on the same screen. Camer a 1, 2, 3, 4 and all camer as can be displayed together . Sequence : T o view camera selected [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 36 Output control : Relay output device can be controlled through simple view page. But note th at you need to get permission to control i t. 2 FW-Voyager based view and recording FW- V oyager is web bas ed DVR software for personal video recording. Using this fr ee software, user can easily[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 37 video related value string for his own applicat i on. Default Video F ormat : T o manually change vide o format. Note th at server auto sense the video format Video with UART sensor data : Serial input data can be sent along with video so that applic ation progr am can read serial input d[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 38 Thus, please contact your local vendor to get more in-depth technical info to decrypt the value string. 3.1.1 Image encryption Image encryption is security feature to prevent unw anted image hacking when anonymous user accesses the sy stem. Once it is enabled, user must enter encryption c[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 39 User defined camera n ame will be appeared on t he camera name column of vi deo. Up to 20 different English cha racters can be used. ( Notice : If you are using 2- Byte Unic ode Charact er, number of character is limited to 10 ) Image Size : 4 different size o f video can be set up. Full [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 40 displayed. Video Source : color and Gr ay mode option Image Quality : 5 quality levels - highest, high, normal, low , lowest ) Note Please note that if you in crease image size and quality , actual JPEG file size will b e increased and this may affect actual transmi ssion fr ame rate. T h[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 41 3.3.2 How to save Motion triggere d image in the NVR solution Recording in the FW-5440/5000 Simply check “ Motion Detection ” option in the recording condition menu in th e FW - 5440 or FW -5000 when motion detection option is enabled in the FlexWA TCH TM server . - INTPLUS [2005] -[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 42 Recording in the FW-Manager T o record motion triggered image in the FW -Manager (NDVR Software) client progr am, you should not use Software motion dete ction function in the FW-Manager. - Simply configure motion detecti on for the selected camera in the FlexWATCH TM server - Set up Moti[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 43 System Configuration System configuration is to set up basic functions which help you properly run and manage the system. It is hi ghly recommended to set up the configur ation before any other configurations. Following functions are provided in t he System configuration mode. - System na[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 44 1) Go to Date & Time setu p menu in the Sy stem configur ation section o f Admin mode 2) Set the correct time and cl ick “ Apply” b utton 2.2 Date & Time using NTP server If multiple servers are installed over th e net work and controlled by client program and synchronized tim[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 45 A. Option to allow system access without system Logi n ID & PW B. Channel based different use r account creation C. Different control a ut hority for Video, PTZ , Audio, and relay out put device control 4.1 Full Access T o allow system access by anyone who know the IP address. PTZ, Au[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 46 Full Access : If full access is selected, any body can access the server and control the video. No Access : This is to tempor ally restrict camera access by specific user without delete user account to temporally bl ock access to the camer a. Selective Access : This is to set up control a[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 47 Thus, 4 TH camer a can be Camera # 3 in this menu. 5 Frame rate control Maximum Video fr ame rate which sever can tr ansmit over the I P network can be set up through Fra me rate control option. Through this maximum fr ame r ate control option, user can limit network bandwi dth co nsumpti[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 48 6 Tx Module Registration(NVCP) ) Notice - If you do no t connect FlexW A TCH TM server to NDVR server , do not set TX module configur ation - Once Tx Module configuration is done, set up RX modu le con figuration in the NDVR server as wel l Video proxy function is supported b y NDVR serve[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 49 1) Click TX Module registration menu in the System configu ration mode of Admin window . 2) T ype in NVCP Password in the NVCP Password configuration filed. ) Notice NVCP Password is security feature which authenticate server access by RX module (FW -5440 or 5000 NDVR server) to FlexWA TC[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 50 5) Once Active mode is selected, type in IP address of NDVR server . ) Note NVCP port should be open to comm unicate with NDVR Serv er , when the FlexWA TCH TM server is programmed to communi cation with NDVR serve r Fol lowing is recommended setting guide for TX and RX module for FlexW A[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 51 Network Configuration Network configu ration mode provides interf ace for the server to be connected to broadband network or PSTN line. In addition to basic network, a pplication port such as HT TP , NVCP , V oice port configuration and IP filtering options are provided. 1 Network configu[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 52 Once DHCP is enabled, there is not other setting to be changed in the network works configuration except DNS info, if required. 2.1.1.1 IP notification by E-mail servic e Y ou can receive IP address of the server thro ugh e-mail from the serv er , when the server is connected to DHCP s er[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 53 configuration in Advanced Service 2.1.1.1 Server access t hrough AOIP serv er Once Server is registered in the AOIP serv er and DHCP is enabled, y ou can access the server through AOIP server . IP address of serv er can be found from AOIP server as well. In this case you do not need to co[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 54 Once PPPo E is enabled, LAN net work setting will be disabled. 3 Network port configuration HT TP port, NVCP and VDCP ports are applicat ion port through which video and audio data can be tran smitted over the TCP/I P network. 3.1 HTTP port configuration When you need to change Default HT[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 55 Note that when Voice Kit is co nnected to Internet, respective UDP port of t he router must be opened. 4 WAN Configuration and Application Server is designed to make a call to ISP or can receive a call from outside so that server can establish Internet connect to send FTP , e- mail or sen[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 56 Server can establish the Internet connection through PSTN line and se nd FTP or e-mail when the alarm condit ion is triggered by any event. Fo llowing can be done through Dial-out functio n • Pre/post alarm image sendin g throu gh e-mail • Pre/post alarm image sending to FTP ser ver t[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 57 PPP Client : This means that FlexW A TCH TM server act as client and call out to ISP . PPP Server : This means that FlexW A TCH TM server acts as a Server and receives a call from remote user . Tel#, User ID and User pass word : ISP phone number and user account for I nternet connection [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 58 modem, GSM or GPRS Modem or any type of wireless modem. This mode is not for general users. Thus, if you need to connect special modem device, please contact your v endor or manufacturer f or more information, sales@flexwatch.com 4.4 Dial-in Configuration Dial-in is to allow clien t PC to[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 59 of the FlexWA TCH TM server . Local IP address and R emote IP address is virt ual IP address which is used at the time of Modem connection only Local IP address : System default IP address (192.168.2. 1) resides in the FlexWA TCH TM server for modem connection only . So when you connect t[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 60 LAN : This is default path the send any data to outside. Modem : w h e n P S T N o r o t h e r m e d i u m t h a n L A N i s u s e d t o s e n d d a t a t o o u t s i d e . T h i s service port must be checked when an y data is to be sent through PSTN or other medium than LAN which is con[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 61 - Once things are set up, you can logi n to AOIP server and connect your FlexWA TCH™ server . ) Note AOIP is proprietary data service run by Flex W A TCH™ or its business partners ar ound the world. Thus, depending on the country AOIP service ca n run by your local vendor or master di[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 62 NVCP- Tx Port should be enabled only when vide o is transmitter to NDVR server such a s FW-5440 a nd FW-5000, or Video pro xy server supplied by FlexW A TCH TM se rv e r . If n o t , d o not enable this option. 7 Network Status Y ou can see all the network status configure d in the system[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 63 External Device connection & configuration External device such as Se rial input device, Serial output (UAR T) device, PTZ (pan/Tilt/Z oom) device, Audi o kit and Alarm in put and o utput device can be connected to the system and controlled over the T CP/IP network. 1 Serial Ports Con[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 64 Available Devices COM AUX Console (Hyper Termi nal) O X Modem X O PTZ O O Voice O O Serial Input O O Serial Output O O None O O 1.1.2 Ports Connection for using two different devices. AUX and CO M part is provided for RS- 232 and RS-485 or RS-422 connection. This enables user to connect m[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 65 his needs. But same type of port f or RS-232, RS-485 or RS-422 can not simultaneously be used . F or example, if COM part of RS-232 is used by Hyper T erminal Connection, COM part of RS-485 can not be operativ e. In this case, AUX pa rt of RS-485/RS-422 or RS-232 port should be used. Inte[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 66 RS-232 + RS-485 AUX(RS232) and CO M(RS485) or COM(RS232) and AUX(RS485) RS-232 + RS-422 AUX(RS232) and CO M(RS422) or COM(RS232) and AUX(RS422) ) You cannot make use of AUX (RS232) port and AUX (RS485, 422) part at the same time. Also it is not avail abl e to use of COM (RS232) port and C[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 67 3) Select ‘ Console ’ at C OM mode, and Click ‘ Apply’ button 4) System reboot will be recommended, then click ‘Reboot’ button. 2.2 Serial Input device Serial input device such as Car Spe ed sensor , BOG sensor , POS (Point of sales), A TM device which communicate with externa[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 68 only . This function is no t for gener al use. Thus, if y ou need more close informati on about this, please contact your local distributor or manufacturer for further information, sales@flexwatch.com . 2.3 Serial output device The system supports to relay third party comman d to target d[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 69 G. After setting up the parameters in the each filed, cl ick ‘ Apply ’ button. Note that if you are using X10 de vice protocol, you do not need t o set up parameters, but simple s elect X10 “En able” optio n. 2.3.2 X 10 device & Z256 X10 and Z256 is a protocol name of Device w[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 70 A. By-pass command string from t hird party This is to send command string from t h ird party application program to the target device connected to the server . More about this function can be supplied b y HT TP CGI API guide. B. Control panel inside of t he system Y ou can create control[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 71 2) Go to Admin Menu > > System Configur ation >> Serial Ports Con figuration . 3) Select ‘PTZ’ at COM or AUX mode, and click ‘ Apply’ button. 4) System reboot will be recommended, then click ‘Reboot’ button. 5) After rebooting, Go to Admi n Menu >> S ystem Co[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 72 Supplier Model Comman d Preset Auto PAN Program Only Lab Test Field Test ** Pelco Spectra 485 (P) O O O ** Pelco Spectra 485(D) O O O * Panasonic WV-CS854 485 O O ** AD Delta Dome 485 O O O * Samsung Techwin SPD1600 485 O O O * Samsung SCC-641 485 O O O O Seyeon FSD-230 485 O O Seyeon SPT[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 73 RNK RNK-DOME 485 O O DAIWA DMP-23-H1 485 O O O LILIN PIH-717 485 O PHILIPS Auto Dome 485 O FINE system CRR-1600I 232 O O O Samsung Techwin SRX-100B 485 O O O NOTE : Symbol Reference * : Preset function was program only . ** : Preset function was Lap Tested only. *** : Preset function was [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 74 5) System reboot will be recommended, then click ‘Reboot’ button. 6) After rebooting, Go to Admi n Menu >> S ystem Configur ation >> Serial Ports Configur ation 7) Click “V oice Mode” , then f ollowing window will show up UDP Port : V oice kit use UDP port to transmit [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 75 8) Click “Save” button to save your configuration. 3 Alarm input device connection FlexW A TCH TM server has Alarm Sensor interface so th a t it can send alar m notificati on by activati ng e-mail or FTP function or acti vate alarm outp ut device such as Siren or li ght. FlexW A TCH T[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 76 light. Manual or automat ic control of alarm outp ut device is supported by the server so t h a t r e l a y o u t p u t d e v i c e s u c h a s s i r e n , l i g h t o r a n y o u t p u t d e v i c e c a n r e m o t e l y b e controlled through standard web browser or third party applicat[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 77 3) Check the output por t number and click appl y button to activ ate the alarm output device 4.2.2 Alarm output device through Admin Page Alarm output device can manuall y be controlled through Admi n page of the system. This option is recommended when web browse r based alarm output con[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 78 combination is provided so as to set up powerful and various working condition for each alarm output device. 1) Go to Advance service option in the Service configuration mode in the Admin window. 2) Click None buffering service menu and select “Alarm output” menu. 3) Check the service[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 79 Advanced Service configuration Advanced service configuration is intended t o provide more sophisticated functions which are required by sophisticat ed u sers. Thus, if you are not f amilia r with or not good at advanced fe atures, we recommend you to read this guide carefully and consult[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 80 & ftp and Alarm buff eri ng service B. Pre alarm buf fer size : Once memory alloca tion is done, assign Pre al arm buffer size (Pre alarm im age buffer pool ) to be used for e-mail , FTP and Alarm buffering services. Any pre alarm buffer for respective e-mail, ftp and Alarm buffering [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 81 pre alarm buffer size fo r respective camera can be done within this assigned memory . Note that Pre Alarm buffer for even Alarm buffering service can be done within this memory size. Thus, you n eed to be careful to assign memory for this service. The r est of memory after setting up Ala[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 82 maximum number of pre alarm for e-mail, ftp or Alarm bufferi ng serv ice (Pre alarm only) can be done with this buffer size, if there is enough memory space for respective services. Note that there must be enoug h memory space left for e-ma il, ftp and Alarm Bufferi ng service (Pre alarm [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 83 Alarm buffering service si ze (60%) • Total Buffer size is variable depen din g on the memory used by the system - Total number of Pre Alar m+ Post Alarm for FTP per channel < 256 frame. - Total number of Pre + Post alarm for e-mail per channel <10 frames for channel. - Pre alarm [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 84 2) Go to Buffering service mode 3) Click “ Buffer Calculator ” button t o run the calcul ator 4) Pre configure pre/post alarm buffer for each service. This previous win dow can be open till you manually disclose the Window . Thus, you can refer to this table wh en yo u configure e-mai[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 85 2.1 Condition Setup This is to define basic condit ion to activate any option selected. Select right condition from the option provided. Always : T o active any selected option regardless condition. If you select t his condition Schedule and Event condition w indow become inactive. Schedu[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 86 setup window become inact ive Event Only : T o activate any selected option by Event on ly . Sensor st atus change is recognized as Event. Schedule and Event : T o active any selected action when Event is triggered f or the specified time period only . If Event is incurred ou t of Sch edu[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 87 Event number can be mapped as a Se nsor port and camer a number . DI Open State : This means that sensor is triggered and beco me open status from Normal cl ose status. Select this when you use NC(Normal C lose) type sensor . DI Close State : This means that sensor is triggered and beco m[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 88 3 e-mail configuration Schedule, event or schedule and event driven e-mail sending is supported by the server so that when there is any pre-co nfigured even t is happene d, e-mail notice will be sent to any e-mail account. 3.1 e-mail function configuration Up to 10 pre/post alarm image ca[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 89 Authentication Login : Now these days most of ISP is try to authen ticate sender e-mail address due to security and spam mail issue. If sender authenti cation is enabled by your I SP , you nee d to get your login ID and Password from your e-mail service provider . Sender (E-MAIL) : put th[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 90 with Pre alarm buffer size. Note that the sum of pre and post alarm can not exc eed 10 frames. Value Format : V alue strings can be sent togeth er with e-mails. Please click “ ” mark in the admin page to get more information. 3.2 e-Mail condition set up Up to 3 different e-mail con d [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 91 slightly differen t . 4.1.1 Directory option for Buffered FTP Buffered F TP mean s that only pre/post alarm buffered image w ill be sent to FTP server when the ftp is triggered by the event. FTP function of FlexWA TCH TM server has two different level of directory and file name option and[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 92 User defined prefix of file name of each image. File name of FTP images w ill automatically be concatenated after prefi x( Base File name ). Directory name : Multiple directories can be created in th e Base directory so that ftp image can be stored in a classified directory . Once you sel[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 93 limit number of image to be stored and refreshed. If you set it as 8, 8images will be stored in the FT P directory and FIFO(first come, f irst out) based image will be saved in the FTP server . Overwrite : This is to refresh old image with new image in the ftp server . This is normally us[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 94 1) Go to Advance Service menu in the service configuration mode and select Buffering Service option 2) Set up Pre alarm bufferi ng configurati on for FTP service 3) Set up FTP directory an d file name option 4) Select the camer a and set up FTP condition for each camera. Up to 3 different[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 95 4) Go to ‘Advanced Services’ menu. - Click ‘ Apply ’ button t o apply the new service configuration as above. - Close the window o f ‘ Admin menu’ . When ‘Save confi guration’ wi ndow pop-up , click ‘Save Configuration’ .  Application idea If server is connected to [...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 96 4) Enable the Alarm bufferi ng service. 5) Select the camer a and assign Pre/post alarm image fr ames. 6) Click “Save” button to memorize your new setting in the system. 7) Click the Condition menu and set up alarm bu ffering service condition. 8) Click “ Advance Service ” menu in[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 97 Preview Single Images : This is to view image one by one. Preview Multi images : Y ou can view panor amic images of all the sa ved images at a glance. 2) Click Preview Single Imager or P review Multi images option t o playback. 3) Click “ Clear Buffer ” to delete all archived images )[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 98 program thr ough CGI P atch. This opti on is to invok e third party application program upon receipt of sensor information from FlexW A TCH TM server . 1) Go to Adva nce service configur ation of Service configur ation mode 2) Click None buffering service mode and go to s ensor notificati[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 99 Utilities Utilities is to mana ge an d control system properly . Save Configuration, Flash Update, System Reboot and system upgrade options are provided. 1 Save Configuration This is to save all new configuration and settin gs in th e system memory . On ce new configuration is saved by ?[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 100 logics for system configuration, since ex ecutin g this option Except Network confi guratio n will lose all of your sett in g. 4 System Update System update can rem otely be done through web page of the system or ftp option with telnet and Hyper T erminal mode. In this user manual only w[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 101 All (kernel, RAM disk, System, Web) Update : T o completely update all th e system for Kernel, RAM Disk, System and W eb all toget her except PTZ Device Driver or Sensor Device Driver . This opt ion is recommended if there is special notice by manufactu rer . Gen erally complete system u[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 102 PTZ Device Driver : PTZ Device Driver is already bu ilt-in the system. But if there is a new PTZ Dev ice driver supported by the system, it can se parately uploaded into the system without other software change. Sensor Device Driver : Serial input device driver can separately be uploaded[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 103 4) Once update is successfully done followin g result will come up. 5) If you wa nt to update R AM Di sk, S ystem and web page, please click “Next” button follow the web guide to updat e more f iles. 6) If all of file update is finished “System Reboot” window will come and do sys[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 104 - INTPLUS [2005] -[...]

Network Video Server User’s Manual Seyeon Tech Co., Ltd 105 Warranty Product Network Video Server Model FlexW A TCH TM 3440 S/N Seyeon T ech Ltd. W arranty 1 year Limited A/S +82-2-3017-0866 www .flexwatch.com Seyeon T ech Co. , Ltd. TEL : +82-2-3017-0855 F AX : +82-2-3017-0843 http://www.seyeon.co.kr http://www .flexwatch.com A/S Center: T el : [...]