Star Micronics Line Thermal/Dot Printer manuel d'utilisation
- Voir en ligne ou télécharger le manuel d’utilisation
- 209 pages
- 4.08 mb
Aller à la page of
Les manuels d’utilisation similaires
-
Printer
Star Micronics TUP400
103 pages 1.78 mb -
Printer
Star Micronics TSP800
115 pages 0.98 mb -
Printer
Star Micronics NP-415W
45 pages 0.35 mb -
Printer
Star Micronics LC-1021
91 pages 0.76 mb -
Printer
Star Micronics TSP800 Series
132 pages 1.65 mb -
Printer
Star Micronics SM-S220i-DB40
31 pages -
Printer
Star Micronics LC-8211+
109 pages 3.61 mb -
Printer
Star Micronics HSP7000
2 pages 1.67 mb
Un bon manuel d’utilisation
Les règles imposent au revendeur l'obligation de fournir à l'acheteur, avec des marchandises, le manuel d’utilisation Star Micronics Line Thermal/Dot Printer. Le manque du manuel d’utilisation ou les informations incorrectes fournies au consommateur sont à la base d'une plainte pour non-conformité du dispositif avec le contrat. Conformément à la loi, l’inclusion du manuel d’utilisation sous une forme autre que le papier est autorisée, ce qui est souvent utilisé récemment, en incluant la forme graphique ou électronique du manuel Star Micronics Line Thermal/Dot Printer ou les vidéos d'instruction pour les utilisateurs. La condition est son caractère lisible et compréhensible.
Qu'est ce que le manuel d’utilisation?
Le mot vient du latin "Instructio", à savoir organiser. Ainsi, le manuel d’utilisation Star Micronics Line Thermal/Dot Printer décrit les étapes de la procédure. Le but du manuel d’utilisation est d’instruire, de faciliter le démarrage, l'utilisation de l'équipement ou l'exécution des actions spécifiques. Le manuel d’utilisation est une collection d'informations sur l'objet/service, une indice.
Malheureusement, peu d'utilisateurs prennent le temps de lire le manuel d’utilisation, et un bon manuel permet non seulement d’apprendre à connaître un certain nombre de fonctionnalités supplémentaires du dispositif acheté, mais aussi éviter la majorité des défaillances.
Donc, ce qui devrait contenir le manuel parfait?
Tout d'abord, le manuel d’utilisation Star Micronics Line Thermal/Dot Printer devrait contenir:
- informations sur les caractéristiques techniques du dispositif Star Micronics Line Thermal/Dot Printer
- nom du fabricant et année de fabrication Star Micronics Line Thermal/Dot Printer
- instructions d'utilisation, de réglage et d’entretien de l'équipement Star Micronics Line Thermal/Dot Printer
- signes de sécurité et attestations confirmant la conformité avec les normes pertinentes
Pourquoi nous ne lisons pas les manuels d’utilisation?
Habituellement, cela est dû au manque de temps et de certitude quant à la fonctionnalité spécifique de l'équipement acheté. Malheureusement, la connexion et le démarrage Star Micronics Line Thermal/Dot Printer ne suffisent pas. Le manuel d’utilisation contient un certain nombre de lignes directrices concernant les fonctionnalités spécifiques, la sécurité, les méthodes d'entretien (même les moyens qui doivent être utilisés), les défauts possibles Star Micronics Line Thermal/Dot Printer et les moyens de résoudre des problèmes communs lors de l'utilisation. Enfin, le manuel contient les coordonnées du service Star Micronics en l'absence de l'efficacité des solutions proposées. Actuellement, les manuels d’utilisation sous la forme d'animations intéressantes et de vidéos pédagogiques qui sont meilleurs que la brochure, sont très populaires. Ce type de manuel permet à l'utilisateur de voir toute la vidéo d'instruction sans sauter les spécifications et les descriptions techniques compliquées Star Micronics Line Thermal/Dot Printer, comme c’est le cas pour la version papier.
Pourquoi lire le manuel d’utilisation?
Tout d'abord, il contient la réponse sur la structure, les possibilités du dispositif Star Micronics Line Thermal/Dot Printer, l'utilisation de divers accessoires et une gamme d'informations pour profiter pleinement de toutes les fonctionnalités et commodités.
Après un achat réussi de l’équipement/dispositif, prenez un moment pour vous familiariser avec toutes les parties du manuel d'utilisation Star Micronics Line Thermal/Dot Printer. À l'heure actuelle, ils sont soigneusement préparés et traduits pour qu'ils soient non seulement compréhensibles pour les utilisateurs, mais pour qu’ils remplissent leur fonction de base de l'information et d’aide.
Table des matières du manuel d’utilisation
-
Page 1
Line Thermal/Dot Printer ST AR Line Mode Command Specications Rev . 0.00 Star Micronics Co., Ltd. Special Products Operating Division[...]
-
Page 2
Contents 1. GENERAL DESCRIPTION 1-1 2. COMMAND FUNCTION LIST 2-1 3. COMMAND DET AILS 3-1 3-1) Explanation of T erms 3-1 3-2) Exception processing 3-2 3-3) Standard Command Details 3-3 3-3-1) Font style and character set 3-3 ESC RS F n 3-3 ESC GS t n 3-4 ESC GS = n1 n2 da1 da2 … dak db1 db2 … dbk 3-5 ESC R n 3-6 ESC / N 3-7 ESC SP n 3-7 ESC M 3-[...]
-
Page 3
ESC Q n 3-38 HT 3-39 ESC D n1 n2 … nk NUL 3-39 ESC D NUL 3-40 ESC GS A n1 n2 3-40 ESC GS R n1 n2 3-41 ESC GS a n 3-42 3-3-7) Download 3-43 ESC & c1 c2 n d1 . . . d48 3-43 ESC & c1 c2 n 3-44 ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n 2 - n 1 + 1 3 - 4 5 ESC % N 3-47 3-3-8) Bit Image Graphics 3-48 ESC K n1 n2 d1 … dk 3-48 ESC L n1 n[...]
-
Page 4
4. CHARACTER CODE T ABLES 4-1 5. APPENDIX 5-1 5-1) Appendix1:BarCodeSpecicationDetails<Thermal> 5- 1 5-1-1) Code 39 5-1 5-1-2) Interleaved 2 of 5 5-1 5-1-3) JAN/EAN/UPC 5-2 5-1-4) Code 128 5-3 5-1-5) Code 93 5-5 5-1-6) NW7 (CODERBAR) 5-5 5-2) Appendix2–StatusSpecications<Shared> 5- 6 [...]
-
Page 5
[...]
-
Page 6
Rev . 0.00 1-1 ST ARLIneModeCommandSpecications 1. GENERAL DESCRIPTION ThisspecicationsdocumentdescribesthecommandspecicationsfortheST ARMODEonhybridprinters. Information contained herein applies to models with the following conditions. • Hybrid printers • Interfaces: - Parallel • RS[...]
-
Page 7
Rev . 0.00 2-1 ST ARLIneModeCommandSpecications 2. COMMAND FUNCTION LIST • Standard Commands Class Commands Name Thermal Slip, V alidation Font style ESC RS F Select font - and character set ESC GS t Select code page ← ESC GS = Write blank code page data ← ESC R Specify international character set ← ESC / Specify/cancel slash[...]
-
Page 8
Rev . 0.00 2-2 ST ARLIneModeCommandSpecications Class Commands Name Thermal Slip, V alidation Page control FF Form feed - ESC C Set page length to n lines - ESC C 0 Set page length in n x 24 mm units - VT Feed paper to vertical tab position - ESC B Set vertical tab position - Horizontal direction position ESC I Set left margin ← ES[...]
-
Page 9
Rev . 0.00 2-3 ST ARLIneModeCommandSpecications Class Commands Name Thermal Slip, V alidation Kanji Character ESC p Set JIS Kanji Character mode ← ESC q Cancel JIS Kanji Character mode ← ESC $ Set/cancel JIS Kanji Character mode ← ESC s Set two-byte Kanji characters left/ right spaces ← ESC t Set single-byte Kanji characters [...]
-
Page 10
Rev . 0.00 2-4 ST ARLIneModeCommandSpecications • Raster Related Commands Class Commands Name Thermal Slip, V alidation Raster commands ESC * r R Initialize raster mode - ESC * r A Enter raster mode - ESC * r B Quit raster mode - ESC * r C Clear raster data - ESC * r D Drawer drive - ESC * r E Set raster EOT mode - ESC * r F Set ra[...]
-
Page 11
Rev . 0.00 2-5 ST ARLIneModeCommandSpecications • Mark Commands Class Commands Name Thermal Slip, V alidation Mark Commands ESC GS * 0 Print mark - ESC GS * 1 Specify mark height and line feed - ESC GS * 2 At each mark number Specify mark color , mark horizontal width - ESC GS * W Register mark format to non- volatile memory - ESC [...]
-
Page 12
Rev . 0.00 2-6 ST ARLIneModeCommandSpecications • Page Function Commands Class Commands Name Thermal Slip, V alidation Page Function ESC GS h 0 180˚inversionfunction - ESC GS h 1 W ater mark function - • Slip/V alidation Function Commands Class Commands Name Thermal Slip, V alidation Slip Function ESC SI - - ESC FF -[...]
-
Page 13
Rev . 0.00 3-1 ST ARLineModeCommandSpecications 3. COMMAND DET AILS 3-1) Explanation of T erms • Reception buffer The buffer for storing data (reception data) received from the host, as it is called the reception buffer. Reception data is temporarily stored in the reception buffer, then processed sequentially. • Line buffer The b[...]
-
Page 14
Rev . 0.00 3-2 ST ARLIneModeCommandSpecications 3-2) Exception processing 1) Undefined codes Codesfrom<00>Hto<1F>Haretargeted.Whencodesnotdefinedascommandsinthisregionarereceived,theyare discarded. (Ex.) Ifprocessingthedatastringof<30>H[...]
-
Page 15
Rev . 0.00 3-3 ST ARLineModeCommandSpecications 3-3) Standard Command Details 3-3-1) Font style and character set ESC RS F n [Name] Select font [Code] ASCII ESC RS F n Hexadecimal 1B 1E 46 n Decimal 27 30 70 n [Dened Area] Thermal : 0 ≤ n ≤ 1, n = 16 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alida[...]
-
Page 16
Rev . 0.00 3-4 ST ARLIneModeCommandSpecications ESC GS t n [Name] Select code page [Code] ASCII ESC GS t n Hexadecimal 1B 1D 74 n Decimal 27 29 1 16 n [Dened Area] Thermal : 0 ≤ n ≤ 21, 32 ≤ n ≤ 34, 64 ≤ n ≤ 79, n = 255 Slip : 0 ≤ n ≤ 21, 32 ≤ n ≤ 34, 64 ≤ n ≤ 79, n = 255 V alidation : 0 ≤ n ≤ 21, 32[...]
-
Page 17
Rev . 0.00 3-5 ST ARLineModeCommandSpecications ESC GS = n1 n2 da1 da2 … dak db1 db2 … dbk [Name] Write blank code page data [Code] ASCII ESC GS = n1 n2 da1 da2 .. dak db1 db2 .. dbk Hexadecimal 1B 1D 3D n1 n2 da1 da2 .. dak db1 db2 .. dbk Decimal 27 29 61 n1 n2 da1 da2 .. dak db1 db2 .. dbk [Dened Area] Thermal : n1 = 0, n[...]
-
Page 18
Rev . 0.00 3-6 ST ARLIneModeCommandSpecications ESC R n [Name] Specify international character set [Code] ASCII ESC R n Hexadecimal 1B 52 n Decimal 27 82 n [Dened Area] Thermal : 0 ≤ n ≤ 14, n = 64, 48 ≤ N ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 69 (”A” ≤ n ≤ “E”) Slip : 0 ≤ n ≤ 14, n = 64, 48 ≤[...]
-
Page 19
Rev . 0.00 3-7 ST ARLineModeCommandSpecications ESC / N [Name] Specify/cancel slash zero [Code] ASCII ESC / n Hexadecimal 1B 2F n Decimal 27 47 n [Dened Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 V alidation : n = 0, 1, 48, 49 [Initial V alue] Thermal : Memory switch setting Slip : Memory switch setting V alidatio[...]
-
Page 20
Rev . 0.00 3-8 ST ARLIneModeCommandSpecications ESC M [Name] (Thermal) Specify 12 dot pitch/(Slip) specify 7 x 9 font (half dots) (default) [Code] ASCII ESC M Hexadecimal 1B 4D Decimal 27 77 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Memory switch setting Slip : - V alidation : - [Function] <[...]
-
Page 21
Rev . 0.00 3-9 ST ARLineModeCommandSpecications ESC : [Name] (Thermal) Specify 16 dot pitch/(Slip) specify 5 x 9 font (3P-1) [Code] ASCII ESC : Hexadecimal 1B 3A Decimal 27 58 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Memory switch setting Slip : - V alidation : - [Function] <Thermal>[...]
-
Page 22
Rev . 0.00 3-10 ST ARLIneModeCommandSpecications ESC 6 [Name] Specify IBM character set #2 [Code] ASCII ESC 6 Hexadecimal 1B 36 Decimal 27 54 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Two bytes ignored ESC 7 [Name] Specify IBM character set #1 [Code] ASCII[...]
-
Page 23
Rev . 0.00 3-1 1 ST ARLineModeCommandSpecications 3-3-2) Character Expansion Settings ESC i n1 n2 [Name] Set/cancel the double wide/high [Code] ASCII ESC i n1 n2 Hexadecimal 1B 69 n1 n2 Decimal 27 105 n1 n2 [Dened Area] Thermal : 0 ≤ n1 ≤ 5, 48 ≤ n1 ≤ 53(“0” ≤ n1 ≤ “5”), 0 ≤ n2 ≤ 5, 48 ≤ n2 ≤ 53(?[...]
-
Page 24
Rev . 0.00 3-12 ST ARLIneModeCommandSpecications ESC W n [Name] Specify/cancel expanded wide [Code] ASCII ESC W n Hexadecimal 1B 57 n Decimal 27 87 n [Dened Area] Thermal : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) Slip : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) V alidation : 0 ≤ n ≤ 5, [...]
-
Page 25
Rev . 0.00 3-13 ST ARLineModeCommandSpecications ESC h n [Name] Specify/cancel expanded high [Code] ASCII ESC h n Hexadecimal 1B 68 n Decimal 27 104 n [Dened Area] Thermal : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) Slip : 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, (“0” ≤ n ≤ “5”) V alidation : 0 ≤ n ≤ 5,[...]
-
Page 26
Rev . 0.00 3-14 ST ARLIneModeCommandSpecications SO [Name] Set double wide [Code] ASCII SO Hexadecimal 0E Decimal 14 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Cancels 2x wide expansion Slip : Cancels 2x wide expansion V alidation : Cancels 2x wide expansion [Function] Specifies double wide for[...]
-
Page 27
Rev . 0.00 3-15 ST ARLineModeCommandSpecications ESC SO [Name] Set double high [Code] ASCII ESC SO Hexadecimal 1B 0E Decimal 27 14 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Double high expansion cancelled. Slip : Double high expansion cancelled. V alidation : Double high expansion cancelled. [[...]
-
Page 28
Rev . 0.00 3-16 ST ARLIneModeCommandSpecications 3-3-3) Print mode ESC E [Name] Select emphasized printing [Code] ASCII ESC E Hexadecimal 1B 45 Decimal 27 69 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Emphasized printing cancelled. Slip : Emphasized printing cancelled. V alidation : Emphasized [...]
-
Page 29
Rev . 0.00 3-17 ST ARLineModeCommandSpecications ESC F [Name] Cancel emphasized printing [Code] ASCII ESC F Hexadecimal 1B 46 Decimal 27 70 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Emphasized printing cancelled. Slip : Emphasized printing cancelled. V alidation : Emphasized printing cancelled[...]
-
Page 30
Rev . 0.00 3-18 ST ARLIneModeCommandSpecications ESC – n [Name] Specify/cancel underling mode [Code] ASCII ESC - n Hexadecimal 1B 2D n Decimal 27 45 n [Dened Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 V alidation : n = 0, 1, 48, 49 [Initial V alue] Thermal : n = 0 (Underline cancelled) Slip : n = 0 (Underline ca[...]
-
Page 31
Rev . 0.00 3-19 ST ARLineModeCommandSpecications ESC _ n [Name] Specify/cancel upperline [Code] ASCII ESC _ n Hexadecimal 1B 5F n Decimal 27 95 n [Dened Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 V alidation : n = 0, 1, 48, 49 [Initial V alue] Thermal : n = 0 (Upperline cancelled) Slip : n = 0 (Upperline cancelled[...]
-
Page 32
Rev . 0.00 3-20 ST ARLIneModeCommandSpecications ESC 4 [Name] (Thermal) Specify black/white inversion/(Slip) specify black/white inversion, red/black color ( substitute function ) [Code] ASCII ESC 4 Hexadecimal 1B 34 Decimal 27 52 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : White/black inversion[...]
-
Page 33
Rev . 0.00 3-21 ST ARLineModeCommandSpecications ESC GS 4 m n [Name] Select red/black substitute function [ESC 4/5 setting] [Code] ASCII ESC GS 4 m n Hexadecimal 1B 1D 34 m n Decimal 27 29 52 m n [Dened Area] Thermal : - Slip : m = 1, 2, 49, 50 When m = 1, 49 (“1”) : n = 0 to 3, 255 When m = 2, 50 (“2”) : n = 0, 2 to 5 [...]
-
Page 34
Rev . 0.00 3-22 ST ARLIneModeCommandSpecications Precautionsforselecting<Option1> 1. Prints white/black inverted characters using 5 x 9 fonts regardless of the current font size setting. 2. Inserts a one dot string of black printing to the head of the white/black inverted characters. 3. Printing data created on a[...]
-
Page 35
Rev . 0.00 3-23 ST ARLineModeCommandSpecications SI [Name] Select upside-down printing [Code] ASCII SI Hexadecimal 0F Decimal 15 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Upside-down printing cancelled Slip : Upside-down printing cancelled V alidation : Upside-down printing cancelled [Function[...]
-
Page 36
Rev . 0.00 3-24 ST ARLIneModeCommandSpecications ESC RS i n [Name] Specify/cancel character rotated mode [Code] ASCII ESC RS i n Hexadecimal 1B 1E 69 n Decimal 27 30 105 n [Dened Area] Thermal : - Slip : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) V alidation : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ [...]
-
Page 37
Rev . 0.00 3-25 ST ARLineModeCommandSpecications 3-3-4) Line Spacing LF [Name] Line feed [Code] ASCII LF Hexadecimal 0A Decimal 10 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Memory switch setting Slip : 1/6 inch line feed V alidation : 1/6 inch line feed [Function] Feeds the currently specified[...]
-
Page 38
Rev . 0.00 3-26 ST ARLIneModeCommandSpecications ESC a n [Name] Feed paper n lines [Code] ASCII ESC a n Hexadecimal 1B 61 n Decimal 27 97 n [Dened Area] Thermal : 1 ≤ n ≤ 127 Slip : 1 ≤ n ≤ 127 V alidation : 1 ≤ n ≤ 127 [Initial V alue] Thermal : Memory switch setting Slip : 1/6 inch V alidation : 1/6 inch [Function[...]
-
Page 39
Rev . 0.00 3-27 ST ARLineModeCommandSpecications ESC z n [Name] Select line feed amount [Code] ASCII ESC z n Hexadecimal 1B 7A n Decimal 27 122 n [Dened Area] Thermal : n = 1, 49 Slip : n = 0, 1, n = 48, 49 V alidation : n = 0, 1, n = 48, 49 [Initial V alue] Thermal : Memory switch setting Slip : 1/6 inch V alidation : 1/6 inch[...]
-
Page 40
Rev . 0.00 3-28 ST ARLIneModeCommandSpecications ESC 1 [Name] (Thermal) Specify 3 mm line feed amount/(Slip) specify 7/72 inch line feed amount [Code] ASCII ESC 1 Hexadecimal 1B 31 Decimal 27 49 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Memory switch setting Slip : 1/6 inch V alidation : 1/6 i[...]
-
Page 41
Rev . 0.00 3-29 ST ARLineModeCommandSpecications ESC j n [Name] Reverse paper feed [Code] ASCII ESC j n Hexadecimal 1B 6A n Decimal 27 106 n [Dened Area] Thermal : - Slip : 0 ≤ n ≤ 255 V alidation : 0 ≤ n ≤ 255 [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Three bytes ignored <Sl[...]
-
Page 42
Rev . 0.00 3-30 ST ARLIneModeCommandSpecications ESC A n [Name] Denes(thermal)a3mm/4mmlinefeedamount/Denes(slip)n/72inchpitchlinefeed [Code] ASCII ESC A n Hexadecimal 1B 41 n Decimal 27 65 n [Dened Area] Thermal : 0 ≤ n ≤ 255 Slip : 0 ≤ n ≤ 85 V alidation : 0 ≤ n ≤ [...]
-
Page 43
Rev . 0.00 3-31 ST ARLineModeCommandSpecications ESC 3 n [Name] Specify n/216 inch paper feed [Code] ASCII ESC 3 n Hexadecimal 1B 33 n Decimal 27 51 n [Dened Area] Thermal : - Slip : 0 ≤ n ≤ 255 V alidation : 0 ≤ n ≤ 255 [Initial V alue] Thermal : - Slip : 1/6 inch line feed V alidation : 1/6 inch line feed [Function] &[...]
-
Page 44
Rev . 0.00 3-32 ST ARLIneModeCommandSpecications 3-3-5) Page Control Commands FF [Name] Form feed [Code] ASCII FF Hexadecimal 0C Decimal 12 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Executes a form feed. If the current position is at the[...]
-
Page 45
Rev . 0.00 3-33 ST ARLineModeCommandSpecications ESC C n [Name] Set page length to n lines [Code] ASCII ESC C n Hexadecimal 1B 43 n Decimal 27 67 n [Dened Area] Thermal : 1 ≤ n ≤ 127 Slip : - V alidation : - [Initial V alue] Thermal : (Form feed amount initial value x 42) Slip : - V alidation : - [Function] <Thermal>?[...]
-
Page 46
Rev . 0.00 3-34 ST ARLIneModeCommandSpecications ESC C 0 n [Name] Set n x 24 mm page length [Code] ASCII ESC C 0 n Hexadecimal 1B 43 00 n Decimal 27 67 0 n [Dened Area] Thermal : 1 ≤ n ≤ 22 Slip : - V alidation : - [Initial V alue] Thermal : (Form feed amount initial value x 42) Slip : - V alidation : - [Function] <Therm[...]
-
Page 47
Rev . 0.00 3-35 ST ARLineModeCommandSpecications VT [Name] Feed paper to vertical tab position [Code] ASCII VT Hexadecimal 0B Decimal 1 1 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Feeds paper to the next vertical tab position. This comma[...]
-
Page 48
Rev . 0.00 3-36 ST ARLIneModeCommandSpecications ESC B n1 n2 … nk NUL [Name] Set vertical tab position [Code] ASCII ESC B n1 n2 .. nk NUL Hexadecimal 1B 42 n1 n2 .. nk 00 Decimal 27 66 n1 n2 .. nk 0 [Dened Area] Thermal : 1 ≤ n ≤ 255, 0 ≤ n ≤ 16 Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidatio[...]
-
Page 49
Rev . 0.00 3-37 ST ARLineModeCommandSpecications 3-3-6) Horizontal Direction Printing Position ESC l n [Name] Set left margin [Code] ASCII ESC l n Hexadecimal 1B 6C n Decimal 27 108 n [Dened Area] Thermal : 0 ≤ n ≤ 255 Slip : 0 ≤ n ≤ (right margin -2) ≤ 255 V alidation : 0 ≤ n ≤ (right margin -2) ≤ 255 [Initial [...]
-
Page 50
Rev . 0.00 3-38 ST ARLIneModeCommandSpecications ESC Q n [Name] Set right margin [Code] ASCII ESC Q n Hexadecimal 1B 51 n Decimal 27 81 n [Dened Area] Thermal : 0 ≤ n ≤ 255 Slip : 2 ≤ n ≤ maximum printable digits ≤ 255 V alidation : 2 ≤ n ≤ maximum printable digits ≤ 255 [Initial V alue] Thermal : - Slip : Maxim[...]
-
Page 51
Rev . 0.00 3-39 ST ARLineModeCommandSpecications HT [Name] Move horizontal tab [Code] ASCII HT Hexadecimal 09 Decimal 9 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Move print position to next horizontal tab position. The current position moves to the next ta[...]
-
Page 52
Rev . 0.00 3-40 ST ARLIneModeCommandSpecications ESC D NUL [Name] Clear horizontal tab [Code] ASCII ESC D NUL Hexadecimal 1B 44 00 Decimal 27 68 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Clears the currently set horizontal tab. (Note) The settings using [...]
-
Page 53
Rev . 0.00 3-41 ST ARLineModeCommandSpecications ESC GS R n1 n2 [Name] Move relative position [Code] ASCII ESC GS R n1 n2 Hexadecimal 1B 1D 52 n1 n2 Decimal 27 29 82 n1 n2 [Dened Area] Thermal : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 Slip : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 V alidation : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255 [Initial[...]
-
Page 54
Rev . 0.00 3-42 ST ARLIneModeCommandSpecications ESC GS a n [Name] Specify position alignment [Code] ASCII ESC GS a n Hexadecimal 1B 1D 61 n Decimal 27 29 97 n [Dened Area] Thermal : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) Slip : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) V alidation : 0 ≤[...]
-
Page 55
Rev . 0.00 3-43 ST ARLineModeCommandSpecications 3-3-7) Download ESC & c1 c2 n d1 . . . d48 [Name] Register 12 x 24 dot font download characters [Code] ASCII ESC & c1 c2 n d1 .. d48 Hexadecimal 1B 26 c1 c2 n d1 .. d48 Decimal 27 38 c1 c2 n d1 .. d48 [Dened Area] Thermal : c1 = 1, 49, c2 = 1, 49, 32 ≤ n ≤ 127, 0 ≤ [...]
-
Page 56
Rev . 0.00 3-44 ST ARLIneModeCommandSpecications ESC & c1 c2 n [Name] Delete 12 x 24 dot font download characters [Code] ASCII ESC & c1 c2 n Hexadecimal 1B 26 c1 c2 n Decimal 27 38 c1 c2 n [Dened Area] Thermal : c1 = 1, 49, c2 = 0, 48, 32 ≤ n ≤ 127 Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V ali[...]
-
Page 57
Rev . 0.00 3-45 ST ARLineModeCommandSpecications ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n 2 - n 1 + 1 [Name] Register download characters [Code] ASCII ESC & NUL n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1 Hexadecimal 1B 26 00 n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n2 - n1 + 1 Decimal 27 38 0 n1 n2 [m d1 d2 d3 d4 d5 (d6 d7)] n2[...]
-
Page 58
Rev . 0.00 3-46 ST ARLIneModeCommandSpecications [Ex.:] When selecting 7 x 9 fonts, and defining the character to 21H: ESC & NUL n1 n2 m d1 d2 d3 d4 d5 d6 d7 Code (Hexadecimal) 1B 26 00 21 21 80 3E 40 88 00 88 40 3E (1 when printing corresponding bits, and 0 for no print)) [Ex.:] When selecting 5 x 9 fonts, and defining the chara[...]
-
Page 59
Rev . 0.00 3-47 ST ARLineModeCommandSpecications ESC % N [Name] Specify/cancel ANK download characters [Code] ASCII ESC % n Hexadecimal 1B 25 n Decimal 27 37 n [Dened Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 V alidation : n = 0, 1, 48, 49 [Initial V alue] Thermal : Cancel ANK download character Slip : Cancel ANK[...]
-
Page 60
Rev . 0.00 3-48 ST ARLIneModeCommandSpecications 3-3-8) Bit Image Graphics ESC K n1 n2 d1 … dk [Name] Standard density bit image [Code] ASCII ESC K n1 n2 d1 .. dk Hexadecimal 1B 4B n1 n2 d1 .. dk Decimal 27 75 n1 n2 d1 .. dk [Dened Area] Thermal : 1 ≤ {(n1 + n2 x 256) x 3} ≤ printable region k = (n1 + n2 x 256) 0 ≤ d ?[...]
-
Page 61
Rev . 0.00 3-49 ST ARLineModeCommandSpecications <Slip>,<Validation> This command prints bit images with only the data count determined by n1. The amount of data that can be printed in one line is limited to the total dot count. Data that exceeds the total dot count or the right margin is ignored. See each printer?[...]
-
Page 62
Rev . 0.00 3-50 ST ARLIneModeCommandSpecications ESC L n1 n2 d1 … dk [Name] High density bit image [Code] ASCII ESC L n1 n2 d1 .. dk Hexadecimal 1B 4C n1 n2 d1 .. dk Decimal 27 76 n1 n2 d1 .. dk [Dened Area] Thermal : 1 ≤ {(n1 + n2 x 256) ≤ printable region k = (n1 + n2 x 256) 0 ≤ d ≤ 255 Slip : 1 ≤( n1 + n2 x 25[...]
-
Page 63
Rev . 0.00 3-51 ST ARLineModeCommandSpecications ESC k n1 n2 d1 … dk [Name] Fine bit image [Code] ASCII ESC k n1 n2 d1 .. dk Hexadecimal 1B 6B n1 n2 d1 .. dk Decimal 27 107 n1 n2 d1 .. dk [Dened Area] Thermal : n2 = 0 1 ≤ {(n1 + n2 x 256) x 8} ≤ printable region k = {(n1 + n2 x 256) x 24} 0 ≤ d ≤ 255 Slip : - V alidat[...]
-
Page 64
Rev . 0.00 3-52 ST ARLIneModeCommandSpecications ESC X n1 n2 d1 … dk [Name] Fine density bit image (Wire-dot, 24 pin compatible) [Code] ASCII ESC X n1 n2 d1 .. dk Hexadecimal 1B 58 n1 n2 d1 .. dk Decimal 27 88 n1 n2 d1 .. dk [Dened Area] Thermal : 1 ≤ (n1 + n2 x 256) ≤ printable region k = {(n1 + n2 x 256) x 3} 0 ≤ d ?[...]
-
Page 65
Rev . 0.00 3-53 ST ARLineModeCommandSpecications ESC ^ m n1 n2 d1 d2 … dk [Name] 9 Dot bit image [Code] ASCII ESC ^ m n1 n2 d1 d2 .. dk Hexadecimal 1B 5E m n1 n2 d1 d2 .. dk Decimal 27 94 m n1 n2 d1 d2 .. dk [Dened Area] Thermal : - Slip : 0 ≤ m ≤ 1 (“0” ≤ m ≤ “1”) V alidation : 0 ≤ m ≤ 1 (“0” ≤ m ?[...]
-
Page 66
Rev . 0.00 3-54 ST ARLIneModeCommandSpecications 3-3-9) Logo ESC FS q n [x1 1 x12 y1 1 y12 d1 … dk]1 … [xn1 xn2 yn1 yn2 d1 … dk] n [Name] Register logo [Code] ASCII ESC FS q n [x1 1 x12 y1 1 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Hexadecimal 1B 1C 71 n [x1 1 x12 y1 1 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Decimal [...]
-
Page 67
Rev . 0.00 3-55 ST ARLineModeCommandSpecications (Note) Registration data shared by all stations, and modes. If this command is used frequently , there is the possibility of damaging the non-volatile memory . Write to the non-volatile memory less than 10 times in one day . Relationship of logo and registered data xn = xn1 + xn2 x 256[...]
-
Page 68
Rev . 0.00 3-56 ST ARLIneModeCommandSpecications ESC FS p n m [Name] Print logo [Code] ASCII ESC FS p n m Hexadecimal 1B 1C 70 n m Decimal 27 28 1 12 n m [Dened Area] Thermal : 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”) Slip : 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ ?[...]
-
Page 69
Rev . 0.00 3-57 ST ARLineModeCommandSpecications ESC RS L m [Name] Logo batch control [Code] ASCII ESC RS L m Hexadecimal 1B 1E 4C m Decimal 27 30 76 m [Dened Area] Thermal : 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”), m = 255 Slip : 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”), m = 255 V alidati[...]
-
Page 70
Rev . 0.00 3-58 ST ARLIneModeCommandSpecications 3-3-10) Bar Codes ESC b n1 n2 n3 n4 d1 . . . dk RS [Name] Print bar code [Code] ASCII ESC b n1 n2 n3 n4 d1 .. dk RS Hexadecimal 1B 62 n1 n2 n3 n4 d1 .. dk 1E Decimal 27 98 n1 n2 n3 n4 d1 .. dk 30 [Dened Area] Thermal : 0 ≤ n1 ≤ 8, 48 ≤ n1 ≤ 56 (“0” ≤ n1 ≤ “8”)[...]
-
Page 71
Rev . 0.00 3-59 ST ARLineModeCommandSpecications • n3: Bar Code Mode Selection n3 Bar Codes T ypes UPC-E, UPC-A, JAN/EAN8 Code39, NW-7 ITF JAN/EAN13, Code128, Code93 1, 49 Minimum module 2 dots Narrow : Wide = 2: 6 dots Narrow : Wide = 2: 5 dots 2, 50 Minimum module 3 dots Narrow : Wide = 3: 9 dots Narrow : Wide = 4:10 dots 3, 51 M[...]
-
Page 72
Rev . 0.00 3-60 ST ARLIneModeCommandSpecications 3-3-1 1) Cutter Control ESC d n [Name] Auto-cutter: [Code] ASCII ESC d n Hexadecimal 1B 64 n Decimal 27 100 n [Dened Area] Thermal : 0 ≤ d ≤ 3, 48 ≤ d ≤ 51 (“0” ≤ d ≤ “3”) Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function[...]
-
Page 73
Rev . 0.00 3-61 ST ARLineModeCommandSpecications 3-3-12) External Device Drive ESC BEL n1 n2 [Name] Set external drive device 1 pulse width [Code] ASCII ESC BEL n1 n2 Hexadecimal 1B 07 n1 n2 Decimal 27 7 n1 n2 [Dened Area] Thermal : 1 ≤ n1 ≤ 127, 1 ≤ n2 ≤ 127 Slip : 1 ≤ n1 ≤ 127, 1 ≤ n2 ≤ 127 V alidation : 1 ≤[...]
-
Page 74
Rev . 0.00 3-62 ST ARLIneModeCommandSpecications BEL [Name] External device 1 drive instruction [Code] ASCII BEL Hexadecimal 07 Decimal 7 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Executes the external device drive conditions set according to the command t[...]
-
Page 75
Rev . 0.00 3-63 ST ARLineModeCommandSpecications SUB [Name] External device 2 drive instruction [Code] ASCII SUB Hexadecimal 1A Decimal 26 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Drives external device 2. The energizing time and delay time for the extern[...]
-
Page 76
Rev . 0.00 3-64 ST ARLIneModeCommandSpecications ESC GS BEL m t1 t2 [Name] Ring buzzer [Code] ASCII ESC GS BEL m t1 t2 Hexadecimal 1B 1D 07 m t1 t2 Decimal 27 29 7 m t1 t2 [Dened Area] Thermal : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50 (“1” ≤ m ≤ “2”) 1 ≤ t1 ≤ 255, 1 ≤ t2 ≤ 255 Slip : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50 (?[...]
-
Page 77
Rev . 0.00 3-65 ST ARLineModeCommandSpecications ESC GS EM DC1 m n1 n2 [Name] Set external buzzer drive pulse condition [Code] ASCII ESC GS EM DC1 m n1 n2 Hexadecimal 1B 1D 19 1 1 m n1 n2 Decimal 27 29 25 17 m n1 n2 [Dened Area] Thermal : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50, (“1” ≤ m ≤ “2”) 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤[...]
-
Page 78
Rev . 0.00 3-66 ST ARLIneModeCommandSpecications ESC GS EM DC2 m n1 n2 [Name] Execute external buzzer drive [Code] ASCII ESC GS EM DC2 m n1 n2 Hexadecimal 1B 1D 19 12 m n1 n2 Decimal 27 29 25 18 m n1 n2 [Dened Area] Thermal : 1 ≤ m ≤ 2, 49 ≤ m ≤ 50, (“1” ≤ m ≤ “2”) 1 ≤ n1 ≤ 20, n2 = 0 Slip : 1 ≤ m ≤ [...]
-
Page 79
Rev . 0.00 3-67 ST ARLineModeCommandSpecications 3-3-13) Print Settings ESC RS d n [Name] Set print density [Code] ASCII ESC RS d n Hexadecimal 1B 1E 64 n Decimal 27 30 100 n [Dened Area] Thermal : 0 ≤ n ≤ 15 48 ≤ n ≤ 57 (”0” ≤ n ≤ “9”), 65 ≤ n ≤ 70 (”A” ≤ n ≤ “F”) Slip : - V alidation : - [I[...]
-
Page 80
Rev . 0.00 3-68 ST ARLIneModeCommandSpecications ESC RS r n [Name] Set printing speed [Code] ASCII ESC RS r n Hexadecimal 1B 1E 72 n Decimal 27 30 1 14 n [Dened Area] Thermal : 0 ≤ n ≤ 2 48 ≤ n ≤ 50 (“0” ≤ n ≤ “2”) Slip : - V alidation : - [Initial V alue] Thermal : Memory switch setting Slip : - V alidation[...]
-
Page 81
Rev . 0.00 3-69 ST ARLineModeCommandSpecications 3-3-14) Status ESC RS a n [Name] Set status transmission conditions [Code] ASCII ESC RS a n Hexadecimal 1B 1E 61 n Decimal 27 30 97 n [Dened Area] Thermal : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “51”) Slip : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “5[...]
-
Page 82
Rev . 0.00 3-70 ST ARLIneModeCommandSpecications ESC ACK SOH [Name] Real-time printer status (ASB Status) [Code] ASCII ESC ACK SOH Hexadecimal 1B 06 01 Decimal 27 6 1 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] This command is effective only when using an in[...]
-
Page 83
Rev . 0.00 3-71 ST ARLineModeCommandSpecications EOT [Name] Real-time printer status (2) [Code] ASCII EOT Hexadecimal 04 Decimal 4 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] This command is effective only when using an interface capable of bi-directional da[...]
-
Page 84
Rev . 0.00 3-72 ST ARLIneModeCommandSpecications ESC RS E n [Name] Initialize ASB ETB counter , and ETB status. [Code] ASCII ESC RS E n Hexadecimal 1B 1E 45 n Decimal 27 30 69 n [Dened Area] Thermal : n = 0, 48 (“0”) Slip : n = 0, 48 (“0”) V alidation : n = 0, 48 (“0”) [Initial V alue] Thermal : ASB ETB counter = 0 [...]
-
Page 85
Rev . 0.00 3-73 ST ARLineModeCommandSpecications 3-3-15) Kanji Characters ESC p [Name] Specify JIS Kanji character mode [Code] ASCII ESC p Hexadecimal 1B 70 Decimal 27 1 12 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Cancel JIS Kanji character mode Slip : Cancel JIS Kanji character mode V alidat[...]
-
Page 86
Rev . 0.00 3-74 ST ARLIneModeCommandSpecications ESC $ n [Name] Specify/cancel JIS Kanji character mode [Code] ASCII ESC $ n Hexadecimal 1B 24 n Decimal 27 36 n [Dened Area] Thermal : n = 0, 1, 48, 49 Slip : n = 0, 1, 48, 49 V alidation : n = 0, 1, 48, 49 [Initial V alue] Thermal : Memory switch setting Slip : Memory switch set[...]
-
Page 87
Rev . 0.00 3-75 ST ARLineModeCommandSpecications ESC s n1 n2 [Name] Set two-byte Kanji characters left/right spaces [Code] ASCII ESC s n1 n2 Hexadecimal 1B 73 n1 n2 Decimal 27 1 15 n1 n2 [Dened Area] Thermal : 0 ≤ n1 ≤ 7, 48 ≤ n1 ≤ 55 (“0” ≤ n1 ≤ “7”) 0 ≤ n2 ≤ 15, 48 ≤ n2 ≤ 57 (”0” ≤ n2 ≤ “[...]
-
Page 88
Rev . 0.00 3-76 ST ARLIneModeCommandSpecications ESC t n1 n2 [Name] Set single-byte Kanji characters left/right spaces [Code] ASCII ESC t n1 n2 Hexadecimal 1B 74 n1 n2 Decimal 27 1 16 n1 n2 [Dened Area] Thermal : 0 ≤ n1 ≤ 7, 48 ≤ n1 ≤ 55 (“0” ≤ n1 ≤ “7”) 0 ≤ n2 ≤ 15, 48 ≤ n2 ≤ 57 (”0” ≤ n2 ≤ [...]
-
Page 89
Rev . 0.00 3-77 ST ARLineModeCommandSpecications ESC r c1 c2 d1 … dk [Name] Register Chinese download characters [Code] ASCII ESC r c1 c2 d1 .. dk Hexadecimal 1B 72 c1 c2 d1 .. dk Decimal 27 1 14 c1 c2 d1 .. dk [Dened Area] Thermal : 0 ≤ d ≤ 255 k=72,c1andc2differaccordingtospecicationsand[...]
-
Page 90
Rev . 0.00 3-78 ST ARLIneModeCommandSpecications <Slip>,<Validation> The defined ranges are shown below. Specications c1 c2 Registration count Japanese Language Kanji characters c1 = 77h 21h ≤ c2 ≤ 7Eh 94 Characters They are designed as shown below and data is sent sequentially. The font of Kanji download cha[...]
-
Page 91
Rev . 0.00 3-79 ST ARLineModeCommandSpecications ESC u n [Name] Specify two-byte 16 x 16 dot Kanji character (Single density/double density) [Code] ASCII ESC u n Hexadecimal 1B 75 n Decimal 27 1 17 n [Dened Area] Thermal : - Slip : n = 0, 1, n = 48, 49 (“0,” “1”) V alidation : n = 0, 1, n = 48, 49 (“0,” “1”) [In[...]
-
Page 92
Rev . 0.00 3-80 ST ARLIneModeCommandSpecications ESC x n [Name] Specify expanded Kanji characters (Double tall/double high & wide) [Code] ASCII ESC x n Hexadecimal 1B 78 n Decimal 27 120 n [Dened Area] Thermal : - Slip : n = 0, 1, n = 48, 49 (“0,” “1”) V alidation : n = 0, 1, n = 48, 49 (“0,” “1”) [Initial V[...]
-
Page 93
Rev . 0.00 3-81 ST ARLineModeCommandSpecications ESC w n [Name] Specify expanded Kanji characters (batch double tall/double high & wide) [Code] ASCII ESC w n Hexadecimal 1B 77 n Decimal 27 1 19 n [Dened Area] Thermal : - Slip : n = 0, 1, n = 48, 49 (“0,” “1”) V alidation : n = 0, 1, n = 48, 49 (“0,” “1”) [In[...]
-
Page 94
Rev . 0.00 3-82 ST ARLIneModeCommandSpecications 3-3-16) Others RS [Name] Ring buzzer [Code] ASCII RS Hexadecimal 1E Decimal 30 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Issues a short buzzer sound from the printer. Execute this command after printing the [...]
-
Page 95
Rev . 0.00 3-83 ST ARLineModeCommandSpecications ESC @ [Name] Command initialization [Code] ASCII ESC @ Hexadecimal 1B 40 Decimal 27 64 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Initializes each command after printing data in the line buffer. However, prin[...]
-
Page 96
Rev . 0.00 3-84 ST ARLIneModeCommandSpecications ESC U n [Name] Select printing direction [Code] ASCII ESC U n Hexadecimal 1B 55 n Decimal 27 85 n [Dened Area] Thermal : - Slip : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) V alidation : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) [Initial V alue][...]
-
Page 97
Rev . 0.00 3-85 ST ARLineModeCommandSpecications ESC GS # m N n1 n2 n3 n4 LF NUL [Name] Set memory switch [Code] ASCII ESC GS # m N n1 n2 n3 n4 LF NUL Hexadecimal 1B 1D 23 m N n1 n2 n3 n4 0A 00 Decimal 27 29 35 m N n1 n2 n3 n4 10 0 [Dened Area] Thermal : m = 87, 84, 44, 43, 45, 64, 75, 76 (m = “W”, “T”, “,”, “+”[...]
-
Page 98
Rev . 0.00 3-86 ST ARLIneModeCommandSpecications ESC # @ LF NUL [Name] Initialize all memory switches [Code] ASCII ESC # @ LF NUL Hexadecimal 1B 23 40 0A 00 Decimal 27 35 64 10 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Initializes all memory switches Val[...]
-
Page 99
Rev . 0.00 3-87 ST ARLineModeCommandSpecications ESC # * LF NUL [Name] Inquire printer version [Code] ASCII ESC # * LF NUL Hexadecimal 1B 23 2A 0A 00 Decimal 27 35 42 10 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Sends printer version. ESC # *, printer ve[...]
-
Page 100
Rev . 0.00 3-88 ST ARLIneModeCommandSpecications DC3 [Name] Printer deselect [Code] ASCII DC3 Hexadecimal 13 Decimal 19 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Select printer Slip : Select printer V alidation : Select printer [Function] Deselects printer. All received data is discarded until[...]
-
Page 101
Rev . 0.00 3-89 ST ARLineModeCommandSpecications 3-4) Raster Graphics Command Details Raster graphics are command types and incidental specifications that enable high speed and high quality printing of graphics. The following shows the characteristics and specifications for raster graphics. • Define the raster mode command as an ex[...]
-
Page 102
Rev . 0.00 3-90 ST ARLIneModeCommandSpecications ESC * r R [Name] Initialize raster mode [Code] ASCII ESC * r R Hexadecimal 1B 2A 72 52 Decimal 27 42 1 14 82 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Initializes raster mode. This command[...]
-
Page 103
Rev . 0.00 3-91 ST ARLineModeCommandSpecications ESC * r A [Name] Enter raster mode [Code] ASCII ESC * r A Hexadecimal 1B 2A 72 41 Decimal 27 42 1 14 65 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Enters raster mode. This command is ignore[...]
-
Page 104
Rev . 0.00 3-92 ST ARLIneModeCommandSpecications ESC * r B [Name] Quit raster mode [Code] ASCII ESC * r B Hexadecimal 1B 2A 72 42 Decimal 27 42 1 14 66 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Quits raster mode. When raster mode is quit[...]
-
Page 105
Rev . 0.00 3-93 ST ARLineModeCommandSpecications ESC * r D n NUL [Name] Drawer drive [Code] ASCII ESC * r D n NUL Hexadecimal 1B 2A 72 44 n 00 Decimal 27 42 1 14 68 n 0 [Dened Area] Thermal : 0 ≤ n ≤ 3 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] <Thermal> Drives the[...]
-
Page 106
Rev . 0.00 3-94 ST ARLIneModeCommandSpecications ESC * r E n NUL [Name] Set raster EOT mode [Code] ASCII ESC * r E n NUL Hexadecimal 1B 2A 72 45 n 00 Decimal 27 42 1 14 69 n 0 [Dened Area] Thermal : n = 0, 1, 2, 3, 8, 9, 12, 13 Slip : - V alidation : - [Initial V alue] Thermal : n = 13 Slip : - V alidation : - [Function] <Th[...]
-
Page 107
Rev . 0.00 3-95 ST ARLineModeCommandSpecications ESC * r F n NUL [Name] Set raster FF mode [Code] ASCII ESC * r F n NUL Hexadecimal 1B 2A 72 46 n 00 Decimal 27 42 1 14 70 n 0 [Dened Area] Thermal : n = 0, 1, 2, 3, 8, 9, 12, 13 Slip : - V alidation : - [Initial V alue] Thermal : n = 13 Slip : - V alidation : - [Function] <The[...]
-
Page 108
Rev . 0.00 3-96 ST ARLIneModeCommandSpecications ESC * r P n NUL [Name] Set raster page length [Code] ASCII ESC * r P n NUL Hexadecimal 1B 2A 72 50 n 00 Decimal 27 42 1 14 80 n 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : Raster image buffer length Slip : - V alidation : - [Function] <Therma[...]
-
Page 109
Rev . 0.00 3-97 ST ARLineModeCommandSpecications ESC * r m l n NUL [Name] Set raster left margin [Code] ASCII ESC * r m l n NUL Hexadecimal 1B 2A 72 6D 6C n 00 Decimal 27 42 1 14 109 108 n 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] <Thermal> [...]
-
Page 110
Rev . 0.00 3-98 ST ARLIneModeCommandSpecications ESC * r T n NUL [Name] Set raster top margin [Code] ASCII ESC * r T n NUL Hexadecimal 1B 2A 72 54 n 00 Decimal 27 42 1 14 84 n 0 [Dened Area] Thermal : 0 ≤ n ≤ 2 Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Sets [...]
-
Page 111
Rev . 0.00 3-99 ST ARLineModeCommandSpecications ESC * r K n NUL [Name] Set raster print color [Code] ASCII ESC * r K n NUL Hexadecimal 1B 2A 72 4B n 00 Decimal 27 42 1 14 75 n 0 [Dened Area] Thermal : 0 ≤ n ≤ 3 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] <Thermal> [...]
-
Page 112
Rev . 0.00 3-100 ST ARLIneModeCommandSpecications b n1 n2 data [Name] Send raster data (auto line feed) [Code] ASCII b n1 n2 d1 d2 ... dk Hexadecimal 62 n1 n2 d1 d2 ... dk Decimal 98 n1 n2 d1 d2 ... dk [Dened Area] Thermal : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255, 0 ≤ d ≤ 255 k = n1 + n2 x 256, 1 ≤ k Slip : - V alidation : - [...]
-
Page 113
Rev . 0.00 3-101 ST ARLineModeCommandSpecications k n1 n2 data [Name] T ransfer raster data [Code] ASCII k n1 n2 d1 d2 ... dk Hexadecimal 6B n1 n2 d1 d2 ... dk Decimal 107 n1 n2 d1 d2 ... dk [Dened Area] Thermal : 0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255, 0 ≤ d ≤ 255 k = n1 + n2 x 256, 1 ≤ k Slip : - V alidation : - [Initial V [...]
-
Page 114
Rev . 0.00 3-102 ST ARLIneModeCommandSpecications ESC * r Y n NUL [Name] Moveverticaldirectionposition(Linefeedforspecieddots) [Code] ASCII ESC * r Y n NUL Hexadecimal 1B 2A 72 59 n 00 Decimal 27 42 1 14 89 n 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V a[...]
-
Page 115
Rev . 0.00 3-103 ST ARLineModeCommandSpecications ESC FF EOT [Name] Execute EOT mode [Code] ASCII ESC FF EOT Hexadecimal 1B 0C 04 Decimal 27 12 4 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Executes EOT mode. Executes operation specified b[...]
-
Page 116
Rev . 0.00 3-104 ST ARLIneModeCommandSpecications ESC * r V m n NUL [Name] Execute external buzzer drive [Code] ASCII ESC * r V 1 n NUL Hexadecimal 1B 2A 72 56 31 n 0 Decimal 27 42 1 14 86 49 n 0 [Dened Area] Thermal : m = 49, 50, 1 ≤ n ≤ 20 Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Fun[...]
-
Page 117
Rev . 0.00 3-105 ST ARLineModeCommandSpecications 3-5) Black Mark Related Command Details The following commands control top of form functions using black mark paper. The following commands are effective only when black mark is set to be effective. ESC d n [Name] Auto - cutter: [Code] ASCII ESC d n Hexadecimal 1B 64 n Decimal 27 100 [...]
-
Page 118
Rev . 0.00 3-106 ST ARLIneModeCommandSpecications FF [Name] Execute top of form [Code] ASCII FF Hexadecimal 0C Decimal 12 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Executes top of form. <Slip>,<Validation> One byte igno[...]
-
Page 119
Rev . 0.00 3-107 ST ARLineModeCommandSpecications ESC C 0 n [Name] Set page length to n x 24 mm units [Code] ASCII ESC C 0 n Hexadecimal 1B 43 0 n Decimal 27 67 0 n [Dened Area] Thermal : 1 ≤ n ≤ 22 Slip : - V alidation : - [Initial V alue] Thermal : (Form feed amount initial value x 42) Slip : - V alidation : - [Function] [...]
-
Page 120
Rev . 0.00 3-108 ST ARLIneModeCommandSpecications VT [Name] Feed paper to vertical tab position [Code] ASCII VT Hexadecimal 0B Decimal 1 1 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> When black mark is effective, this command is ignored. &[...]
-
Page 121
Rev . 0.00 3-109 ST ARLineModeCommandSpecications ESC B NUL [Name] Clear vertical tab position [Code] ASCII ESC B NUL Hexadecimal 1B 42 00 Decimal 27 66 0 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> When black mark is effective, this comma[...]
-
Page 122
Rev . 0.00 3-1 10 ST ARLIneModeCommandSpecications 3-6) 2-Color Printing Command Details The following commands control 2-color printing functions. The following commands are effective only when using a model handling 2-color printing. ESC RS c n [Name] Set print color in 2-color print mode [Code] ASCII ESC RS c n Hexadecimal 1B 1E 6[...]
-
Page 123
Rev . 0.00 3-1 1 1 ST ARLineModeCommandSpecications ESC RS C n [Name] Select/cancel 2-color print mode [Code] ASCII ESC RS C n Hexadecimal 1B 1E 43 n Decimal 27 30 67 n [Dened Area] Thermal : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 (“0” ≤ n ≤ “2”), n = 16, n =32 Slip : - V alidation : - [Initial V alue] Thermal : n = 0, 48 S[...]
-
Page 124
Rev . 0.00 3-1 12 ST ARLIneModeCommandSpecications ESC 4 [Name] (Thermal) Specify black/white inversion/(Slip) specify black/white inversion/specify red/black color [Code] ASCII ESC 4 Hexadecimal 1B 34 Decimal 27 52 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : White/black inversion cancelled Slip[...]
-
Page 125
Rev . 0.00 3-1 13 ST ARLineModeCommandSpecications ESC RS d n [Name] Set print density [Code] ASCII ESC RS d n Hexadecimal 1B 1E 64 n Decimal 27 30 100 n [Dened Area] Thermal : 0 ≤ n ≤ 15 48 ≤ n ≤ 57 (“0” ≤ n ≤ “9”), 65 ≤ n ≤ 70 (“A” ≤ n ≤ “F”) Slip : - V alidation : - [Initial V alue] Therma[...]
-
Page 126
Rev . 0.00 3-1 14 ST ARLIneModeCommandSpecications ESC RS r n [Name] Set printing speed [Code] ASCII ESC RS r n Hexadecimal 1B 1E 72 n Decimal 27 30 1 14 n [Dened Area] Thermal : 0 ≤ n ≤ 2, 48 ≤ n ≤ 50, (“0” ≤ n ≤ “2”) Slip : - V alidation : - [Initial V alue] Thermal : Memory switch setting Slip : - V alida[...]
-
Page 127
Rev . 0.00 3-1 15 ST ARLineModeCommandSpecications ESC FS q n [x1 1 x12 y1 1 y12 d1 … dk]1 … [xn1 xn2 yn1 yn2 d1 … dk] n [Name] Register logo [Code] ASCII ESC FS q n [x1 1 x12 y1 1 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Hexadecimal 1B 1C 71 n [x1 1 x12 y1 1 y12 d1 .. dk]1 .. [xn1 xn2 yn1 yn2 d1 .. dk]n Decimal 27 28 1 13[...]
-
Page 128
Rev . 0.00 3-1 16 ST ARLIneModeCommandSpecications (Note) The registered data is shared by all stations and modes. If this command is used frequently , there is the possibility of damaging the non-volatile memory . Write to the non-volatile memory less than 10 times in one day . Relationship of logo and registered data xn = xn1 + xn2[...]
-
Page 129
Rev . 0.00 3-1 17 ST ARLineModeCommandSpecications ESC FS p n m [Name] Print logo [Code] ASCII ESC FS p n m Hexadecimal 1B 1C 70 n m Decimal 27 28 1 12 n m [Dened Area] Thermal : 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ “3”) Slip : 1 ≤ n ≤ 255 0 ≤ m ≤ 3, 48 ≤ m ≤ 51, (“0” ≤ m ≤ [...]
-
Page 130
Rev . 0.00 3-1 18 ST ARLIneModeCommandSpecications 3-7) Mark Command Details This command is specialized to mark sheet printing for lotteries. This command can print lines. Print Sample Command Transmission Example • Mark Format Mark Height h = 10 dots; Mark Line Feed Amount V = 20 dots Mark number 0: Mark Color c = White; Mark Hor[...]
-
Page 131
Rev . 0.00 3-1 19 ST ARLineModeCommandSpecications ESC GS * 0 n m1 m2 m3 … mk [Name] Print Mark [Code] ASCII ESC GS * 0 n m1 m2 m3 ... mk Hexadecimal 1B 1D 2A 30 n m1 m2 m3 ... mk Decimal 27 29 42 48 n m1 m2 m3 ... mk [Dened Area] Thermal : “001” ≤ n ≤ “255”, “0” ≤ m ≤ “9”, k = n Slip : - V alidation :[...]
-
Page 132
Rev . 0.00 3-120 ST ARLIneModeCommandSpecications ESC GS * 1 h v [Name] Specify mark height and line feed [Code] ASCII ESC GS * 1 h v Hexadecimal 1B 1D 2A 31 h v Decimal 27 29 42 49 h v [Dened Area] Thermal : “001” ≤ h ≤ “255”, “001” ≤ v ≤ “255”, h ≤ v Slip : - V alidation : - [Initial V alue] Thermal [...]
-
Page 133
Rev . 0.00 3-121 ST ARLineModeCommandSpecications ESC GS * W [Name] Register mark format to non-volatile memory [Code] ASCII ESC GS * W Hexadecimal 1B 1D 2A 57 Decimal 27 29 42 87 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Registers the mark format (mark he[...]
-
Page 134
Rev . 0.00 3-122 ST ARLIneModeCommandSpecications 3-8) AUTO LOGO Function Command Details If the portion that was changed was only the product name in a system, like the one below, already operating, this command functions to print a logo like the one below by only changing the product name. This function has two oper- ating modes. 1[...]
-
Page 135
Rev . 0.00 3-123 ST ARLineModeCommandSpecications 2) Simple Auto Logo Function Preset the simple Auto Logo function, and execute the following operations with the printing cut command under the existing system as a trigger. (1) Simple Auto Logo function starts up using the existing system cut command as a trigger. (2) Center alignmen[...]
-
Page 136
Rev . 0.00 3-124 ST ARLIneModeCommandSpecications Command Transmission Example 1) Set the Auto Logo function in advance and register to the non-volatile memory. ESC GS / 1 n ( n = 0x01 ): Auto Logo Function ON ESC GS / 2 n ( n = “/” ): Auto Logo Command Character (“/”) Specification ESC GS / 3 nL nH d1 d2 … dk: User macro 1[...]
-
Page 137
Rev . 0.00 3-125 ST ARLineModeCommandSpecications ESC GS / W [Name] Register Auto Logo setting to non-volatile memory [Code] ASCII ESC GS / W Hexadecimal 1b 1d 2f 57 Decimal 27 29 47 87 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Registers Auto Logo setting [...]
-
Page 138
Rev . 0.00 3-126 ST ARLIneModeCommandSpecications ESC GS / 1 n [Name] Set ON/OFF for Auto Logo function [Code] ASCII ESC GS / 1 n Hexadecimal 1b 1d 2f 31 n Decimal 27 29 47 49 n [Dened Area] Thermal : 0 ≤ n ≤ 2 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] <Thermal> S[...]
-
Page 139
Rev . 0.00 3-127 ST ARLineModeCommandSpecications ESC GS / 2 n [Name] Set command characters [Code] ASCII ESC GS / 3 n Hexadecimal 1b 1d 2f 32 n Decimal 27 29 47 50 n [Dened Area] Thermal : 32 ≤ n ≤ 127, n = 0 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] <Thermal> Se[...]
-
Page 140
Rev . 0.00 3-128 ST ARLIneModeCommandSpecications ESC GS / 3 nL nH d1 d2 … dk [Name] Set user macro 1 [Code] ASCII ESC GS / 3 nL nH d1 d2 ... dk Hexadecimal 1b 1d 2f 33 nL nH d1 d2 ... dk Decimal 27 29 47 51 nL nH d1 d2 ... dk [Dened Area] Thermal : 1 ≤ nL ≤ 64, nH = 0 1 ≤ (nL + nH x 256) ≤ 64 dk = (nL + nH x 256) 0 ?[...]
-
Page 141
Rev . 0.00 3-129 ST ARLineModeCommandSpecications ESC GS / 4 nL nH d1 d2 … dk [Name] Set user macro 2 [Code] ASCII ESC GS / 4 nL nH d1 d2 ... dk Hexadecimal 1b 1d 2f 34 nL nH d1 d2 ... dk Decimal 27 29 47 52 nL nH d1 d2 ... dk [Dened Area] Thermal : 1 ≤ nL ≤ 64, nH = 0 1 ≤ (nL + nH x 256) ≤ 64 dk = (nL + nH x 256) 0 ?[...]
-
Page 142
Rev . 0.00 3-130 ST ARLIneModeCommandSpecications ESC GS / 5 n [Name] Set command character switching method [Code] ASCII ESC GS / 5 n Hexadecimal 1b 1d 2f 35 n Decimal 27 29 47 53 n [Dened Area] Thermal : 0 ≤ n ≤ 1 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] <Thermal>[...]
-
Page 143
Rev . 0.00 3-131 ST ARLineModeCommandSpecications ESC GS / 6 n [Name] Partial cut setting just prior to Auto Logo printing [Code] ASCII ESC GS / 6 n Hexadecimal 1b 1d 2f 36 n Decimal 27 29 47 54 n [Dened Area] Thermal : 0 ≤ n ≤ 1 Slip : - V alidation : - [Initial V alue] Thermal : n = 0 Slip : - V alidation : - [Function] &[...]
-
Page 144
Rev . 0.00 3-132 ST ARLIneModeCommandSpecications This command selects execution of a partial cut just prior to Auto Logo Logo 2, and Logo 3, when executing Logos 2 and 3 as an Auto Logo print, as shown above. If a partial cut is set to be executed by this function, it is possible to supply coupons printed by Auto Logo cut by the par[...]
-
Page 145
Rev . 0.00 3-133 ST ARLineModeCommandSpecications 3-9) 2-dimensional Bar Codes PDF417 Command Details This command prints 2-dimensional bar codes PDF417. Commands for 2-dimensional bar codes PDF417 are separated into the following four functions. 1) Barcodetypesetting (<ESC><GS>“x”“S?[...]
-
Page 146
Rev . 0.00 3-134 ST ARLIneModeCommandSpecications These are individual settings, so the following errors may occur even if there are no problems. In such cases, the bar codewillnotbegenerated,andthe(3)printcommand((<ESC><GS>“x”“P”)willbeignored. • An error occur[...]
-
Page 147
Rev . 0.00 3-135 ST ARLineModeCommandSpecications ESC GS x S 0 n p1 p2 [Name] PDF417 bar code size setting [Code] ASCII ESC GS x S 0 n p1 p2 Hexadecimal 1B 1D 78 53 30 n p1 p2 Decimal 27 29 120 83 48 n p1 p2 [Dened Area] Thermal : n = 0, 1 When n = 0 1 ≤ p1 ≤ 99, 1 ≤ p2 ≤ 99 When n = 1 p1 = 0 or 3 ≤ p1 ≤ 90, p2 = 0 [...]
-
Page 148
Rev . 0.00 3-136 ST ARLIneModeCommandSpecications ESC GS x S 2 n [Name] Set PDF417 module X direction size [Code] ASCII ESC GS x S 2 n Hexadecimal 1B 1D 78 53 32 n Decimal 27 29 120 83 50 n [Dened Area] Thermal : 1 ≤ n ≤ 10 Slip : - V alidation : - [Initial V alue] Thermal : n = 2 Slip : - V alidation : - [Function] <The[...]
-
Page 149
Rev . 0.00 3-137 ST ARLineModeCommandSpecications ESC GS x D nL nH d1 d2 … dk [Name] PDF417 bar code data setting [Code] ASCII ESC GS x D nL nH d1 d2 … dk Hexadecimal 1B 1D 78 44 nL nH d1 d2 … dk Decimal 27 29 120 68 nL nH d1 d2 … dk [Dened Area] Thermal : 0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255 1 ≤ (nL + nH x 256) ≤ 102[...]
-
Page 150
Rev . 0.00 3-138 ST ARLIneModeCommandSpecications ESC GS x I [Name] Get PDF417 bar code expansion information [Code] ASCII ESC GS x I Hexadecimal 1B 1D 78 49 Decimal 27 29 120 73 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> In printing bar [...]
-
Page 151
Rev . 0.00 3-139 ST ARLineModeCommandSpecications 3-10) Print Starting T rigger Control Command Details This command is for models equipped with an expansion control function that page-controls the command in line units by page-controlling the image buffer. ESC GS g 0 m n [Name] Print starting trigger [Code] ASCII ESC GS g 0 m n Hexa[...]
-
Page 152
Rev . 0.00 3-140 ST ARLIneModeCommandSpecications 3-1 1) 2-dimensional Bar Codes QR Code Command Details * QR code is a registered trademark of DENSO WAVE Incorporated. This command prints 2-dimensional bar codes of QR code. Commands for 2-dimensional bar codes QR code are separated into the following four functions. 1) Barcode[...]
-
Page 153
Rev . 0.00 3-141 ST ARLineModeCommandSpecications 2) Bar code data setting command This command set the bar code print data. There are four types of data types that can be set by the QR code. They are: numbers, alpha-numeric characters, binary and Kanji characters. However, with these specifications, there are two data setting method[...]
-
Page 154
Rev . 0.00 3-142 ST ARLIneModeCommandSpecications Below is a command transmission example. (1) Bar code type setting <ESC><GS>“y”“S”“0”1 :Settomodel1. <ESC><GS>“y”“S”“1”0 :SeterrorcorrectionleveltoL. <ESC&g[...]
-
Page 155
Rev . 0.00 3-143 ST ARLineModeCommandSpecications ESC GS y S 0 n [Name] Set QR code model [Code] ASCII ESC GS y S 0 n Hexadecimal 1B 1D 79 53 30 n Decimal 27 29 121 83 48 n [Dened Area] Thermal : 1 ≤ n ≤ 2 Slip : - V alidation : - [Initial V alue] Thermal : n = 2 Slip : - V alidation : - [Function] <Thermal> Sets t[...]
-
Page 156
Rev . 0.00 3-144 ST ARLIneModeCommandSpecications ESC GS y S 2 n [Name] Set QR code cell size [Code] ASCII ESC GS y S 2 n Hexadecimal 1B 1D 79 53 32 n Decimal 27 29 121 83 50 n [Dened Area] Thermal : 1 ≤ n ≤ 8 Slip : - V alidation : - [Initial V alue] Thermal : n = 3 Slip : - V alidation : - [Function] <Thermal> Se[...]
-
Page 157
Rev . 0.00 3-145 ST ARLineModeCommandSpecications ESC GS y D 1 m nL nH d1 d2 … dk [Name] QR code data setting (automatic setting) [Code] ASCII ESC GS y D 1 m nL nH d1 d2 … dk Hexadecimal 1B 1D 79 44 31 m nL nH d1 d2 … dk Decimal 27 29 121 68 49 m nL nH d1 d2 … dk [Dened Area] Thermal : m = 0 0 ≤ nL ≤ 255, 0 ≤ nH ?[...]
-
Page 158
Rev . 0.00 3-146 ST ARLIneModeCommandSpecications ESC GS y D 2 a m1 n1L n1H d1 1 d12 … d1k m2 n2L n2H d21 d22 … d2k ml … dlk [Name] QR code data setting (manual setting) [Code] ASCII ESC GS y D 2 a m1 n1L n1H d1 1 d12 … d1k Hexadecimal 1B 1D 79 44 32 a m1 n1L n1H d1 1 d12 … d1k Decimal 27 29 121 68 50 a m1 n1L n1H d1 1 d12 [...]
-
Page 159
Rev . 0.00 3-147 ST ARLineModeCommandSpecications ESC GS y P [Name] Print QR code [Code] ASCII ESC GS y P Hexadecimal 1B 1D 79 50 Decimal 27 29 121 80 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> This command prints the bar code data. When [...]
-
Page 160
Rev . 0.00 3-148 ST ARLIneModeCommandSpecications 3-12) Page Function Command Details ESC GS h 0 k m n [Name] 180˚inversionfunction [Code] ASCII ESC GS h 0 k m n Hexadecimal 1B 1D 68 30 k m n Decimal 27 29 104 48 k m n [Dened Area] Thermal : 0 ≤ k ≤ 1, m = 0, n = 0 Slip : - V alidation : - [Initial V alue] Ther[...]
-
Page 161
Rev . 0.00 3-149 ST ARLineModeCommandSpecications ESC GS h 1 k m n [Name] Water mark function [Code] ASCII ESC GS h 1 k m n Hexadecimal 1B 1D 68 31 k m n Decimal 27 29 104 49 k m n [Dened Area] Thermal : 0 ≤ k ≤ 2, 0 ≤ m ≤ 2, 1 ≤ n ≤ 255 Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [...]
-
Page 162
Rev . 0.00 3-150 ST ARLIneModeCommandSpecications Example of Use 1) Register logo to use as the water mark as logo #1. 2) Water mark function is valid.: ESC GS h 1 k m n (k=0x02, m=0x01, n=0x01) 3) Transmit print data: Print data (print length is within the length of the image buffer) 4) Trigger command transmission: ESC d n (cutter [...]
-
Page 163
Rev . 0.00 3-151 ST ARLineModeCommandSpecications 3-13) Slip/V alidation Function Command Details ESC SI n [Name] Set slip sensor [Code] ASCII ESC SI n Hexadecimal 1B 0F n Decimal 27 15 n [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Three bytes ignored ESC FF[...]
-
Page 164
Rev . 0.00 3-152 ST ARLIneModeCommandSpecications ESC VT m n [Name] Sets slip paper discharge direction and discharge length [Code] ASCII ESC VT m n Hexadecimal 1B 0B m n Decimal 27 1 1 m n [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Four bytes ignored ESC E[...]
-
Page 165
Rev . 0.00 3-153 ST ARLineModeCommandSpecications 3-14) Page Mode Command Details FF [Name] Batch printing of page data (valid only in page mode) [Code] ASCII FF Hexadecimal 0C Decimal 12 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Refer t[...]
-
Page 166
Rev . 0.00 3-154 ST ARLIneModeCommandSpecications ESC n [Name] Selects page mode [Code] ASCII ESC n Hexadecimal 1B 6E Decimal 27 1 10 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Two bytes ignored <Slip>,<Validation> Shift[...]
-
Page 167
Rev . 0.00 3-155 ST ARLineModeCommandSpecications ESC ! [Name] Select line mode (Default) [Code] ASCII ESC ! Hexadecimal 1B 21 Decimal 27 33 [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] <Thermal> Two bytes ignored <Slip>,<Validation>?[...]
-
Page 168
Rev . 0.00 3-156 ST ARLIneModeCommandSpecications ESC * xL xH yL yH dxL dxH dyL dyH [Name] Set page mode print region [Code] ASCII ESC * xL xH yL yH dxL dxH dyL dyH Hexadecimal 1B 2A xL xH yL yH dxL dxH dyL dyH Decimal 27 42 xL xH yL yH dxL dxH dyL dyH [Dened Area] Thermal : - Slip : 0 ≤ xL ≤ 255, 0 ≤ xH ≤ 2 0 ≤ yL ?[...]
-
Page 169
Rev . 0.00 3-157 ST ARLineModeCommandSpecications ESC T n [Name] Set page mode rotation direction [Code] ASCII ESC T n Hexadecimal 1B 54 n Decimal 27 84 n [Dened Area] Thermal : - Slip : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “3”) V alidation : 0 ≤ n ≤ 3, 48 ≤ n ≤ 51, (“0” ≤ n ≤ “3”) [Initial[...]
-
Page 170
Rev . 0.00 3-158 ST ARLIneModeCommandSpecications 3-15) Station Selection Command Details ESC + A n [Name] Select printer station [Code] ASCII ESC + A n Hexadecimal 1B 2B 41 n Decimal 27 43 65 n [Dened Area] Thermal : n = 0, 3, 4, “0”, “3”, “4” Slip : n = 0, 3, 4, “0”, “3”, “4” V alidation : n = 0, 3, 4,[...]
-
Page 171
Rev . 0.00 3-159 ST ARLineModeCommandSpecications 3-16) Presenter Related Command Details The following commands control the presenter functions. The following commands are effective only on models equipped with a presenter. ESC SYN 0 n [Name] Execute presenter paper recovery [Code] ASCII ESC SYN 0 n Hexadecimal 1B 16 30 n Decimal 27[...]
-
Page 172
Rev . 0.00 3-160 ST ARLIneModeCommandSpecications ESC SYN 4 n [Name] Initialize presenter paper counter [Code] ASCII ESC SYN 4 n Hexadecimal 1B 16 4 n Decimal 27 22 52 n [Dened Area] Thermal : - Slip : - V alidation : - [Initial V alue] Thermal : - Slip : - V alidation : - [Function] Four bytes ignored[...]
-
Page 173
Rev . 0.00 3-161 ST ARLineModeCommandSpecications 3-17) MICR Related Command Details The following commands control MICR functions. The following commands are effective only on models equipped with MICR. ESC FS M m n [Name] MICR function [Code] ASCII ESC FS M m n Hexadecimal 1B 1C 4D m n Decimal 27 28 77 m n [Dened Area] Therma[...]
-
Page 174
Rev . 0.00 3-162 ST ARLIneModeCommandSpecications E13B Support Table T ype Numbers SYMBOL1 SYMBOL2 SYMBOL3 SYMBOL4 ASCII 0 to 9 T A O D Hex 30 to 39 54 41 4F 44 Decimal 48 to 57 84 65 79 68 CMC7 Support Table T ype Numbers S I S II S III S IV S V ASCII 0 to 9 / # = > ^ Hex 30 to 39 2F 23 3D 3E 5F Decimal 48 to 57 47 35 61 62 94[...]
-
Page 175
Rev . 0.00 4-1 ST ARLIneModeCommandSpecications 4. CHARACTER CODE T ABLES Character Code Specifications References[...]
-
Page 176
Rev . 0.00 5-1 ST ARLIneModeCommandSpecications 5. APPENDIX 5-1) Appendix 1: Bar Code Specication Details <Thermal> Refer to the dedicated manuals for characteristics and methods of use for each bar code symbol. This section describes precautions and methods for setting when printing with the printer. Bar code widths are set[...]
-
Page 177
Rev . 0.00 5-2 ST ARLIneModeCommandSpecications 5-1-3) JAN/EAN/UPC Used numbers, not only the bar code symbols, are controlled using JAN, EAN and UPC as shared common commer- cial codes. Mainly, they are used for supermarkets such as shops and grocery stores. 1. Each mode and bar code width Items Mode 1 Mode 2 Mode 3 Module Width 2 D[...]
-
Page 178
Rev . 0.00 5-3 ST ARLIneModeCommandSpecications 5-1-4) Code 128 These are bar code symbols that can print ASCII 128 characters. For that reason, use thereof is increasing. 1. Each module and module width Items Mode 1 Mode 2 Mode 3 Module Width 2 Dots 3 Dots 4 Dots Length of 1 Character (*) 2.75mm 4.125mm 5.5mm (*) Start and stob bars[...]
-
Page 179
Rev . 0.00 5-4 ST ARLIneModeCommandSpecications 3. 2-Character set code table <ControlCodes> <ControlCodes> <ControlCodes> Code Format Code Format NUL 00H %@ 25H 40H % 25H %0 25H 30H SOH 01H %A 25H 41H STX 02H %B 25H 42H <FunctionCodes> ETX 03H %C 25H 43H Code Format EOT 04H %D 25H 44H FNC[...]
-
Page 180
Rev . 0.00 5-5 ST ARLIneModeCommandSpecications 5-1-5) Code 93 1. Each mode and module width Items Mode 1 Mode 2 Mode 3 Module Width 2 Dots 3 Dots 4 Dots Length of 1 Character (*) 2.25mm 3.375mm 4.5mm (*) Start and stob bars not included. 2. Regulations • Start/stop codes are automatically applied. • Check character (C, K) is aut[...]
-
Page 181
Rev . 0.00 5-6 ST ARLIneModeCommandSpecications 5-2) Appendix 2 – Status Specications <Shared> This function is valid only when using an interface capable of bi-directional data communications. Refer to your printer’s product specification manual to verify if the interface cable on the printer you use is capable of bi-di[...]
-
Page 182
Rev . 0.00 5-7 ST ARLIneModeCommandSpecications 5-2-3) Automatic Status Automatic status is a group of states that are automatically returned from the printer to the host when the printer’s sta- tus has changed.Automatic status is composed of “Header – 1,” “Header – 2” and “plurality of bytes of the printer sta- tus a[...]
-
Page 183
Rev . 0.00 5-8 ST ARLIneModeCommandSpecications (2) Header -2 Header -2 is the 1 byte length information transmitted from the second byte of the automatic status. The table below shows the composition of the Header -2. Header -2 represents the automatic status version (called automatic status version below) using bit 1 to bit 3 and b[...]
-
Page 184
Rev . 0.00 5-9 ST ARLIneModeCommandSpecications (3) Printer Status Printer status is the status of the printer sent from the 3 rd byte of the automatic status. For the printer status, (the number of bytes added in Header -1 minus two) is returned. Printer status is always updated for new information. (No log exists.) The following sh[...]
-
Page 185
Rev . 0.00 5-10 ST ARLIneModeCommandSpecications <Printerstatus4SensorInformation(SixthByte)> Bit Contents Status By model “0” “1” HSP7000 7 Fixed at “0” - - 6 Not Used (Fixed at “0”) - - 5 Not Used (Fixed at “0”) - 4 Fixed at “0” - - 3 Paper end Paper No paper ○ 2 Paper Near[...]
-
Page 186
Rev . 0.00 5-1 1 ST ARLIneModeCommandSpecications <Printerstatus6ETBCounter(EighthByte)> Bit Contents Status By model “0” “1” HSP7000 7 Fixed at “0” - - 6 ETB Counter Bit-4 ○ 5 ETB Counter Bit-3 ○ 4 Fixed at “0” - - 3 ETB Counter Bit-2 ○ 2 ETB Counter Bit-1 ○ 1 ETB Counter Bit-[...]
-
Page 187
Rev . 0.00 5-12 ST ARLIneModeCommandSpecications 5-2-4) Printer Status T ransmission Specication when using Ethernet and W ireless LAN Interfaces The following explains the printer status transmission specification when using Ethernet and wireless LAN interfaces. 1) Transmission format: • When transmitting only STAR ASB: STAR AS[...]
-
Page 188
Rev . 0.00 5-13 ST ARLIneModeCommandSpecications (5) Printer status (variable) Status sent by printer The content of the status differs according to the cause. Refer to Commands That are Factors, and Automatic Status for details on the content of the status. (6) Delimiter 2 (1 byte) Sends “;”. 3) Status transmission specification[...]
-
Page 189
Rev . 0.00 5-14 ST ARLIneModeCommandSpecications 5-3) Appendix 3 – Blank Code Page Conguration <Thermal> Blank code pages are character code tables that are empty from character code 80H to FFH. They can be specified using the command below. • ESC GS t n (n = 255) Also, it is possible to write data to the blank code page[...]
-
Page 190
Rev . 0.00 5-15 ST ARLIneModeCommandSpecications 2. Example configuration of Font B data. (9 x 24 font) Fig. A-2 9 x 24 Font MSB LSB MSB LSB d1 d2 0 0 0 0 0 0 0 d3 • • • d4 0 0 0 0 0 0 0 d5 • • • • • d6 0 0 0 0 0 0 0 d7 • • • • • d8 0 0 0 0 0 0 0 d9 • • • • d10 0 0 0 0 0 0 0 d1 1 • • • • d12 [...]
-
Page 191
Rev . 0.00 5-16 ST ARLIneModeCommandSpecications 5-4) Appendix 4 : QR Code Maximum Input Character Count in Each V erson <Thermal> 1) Model 1 Versions and Maximum Input Character Count V ersion Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanji Character 1 21 L 40 24 17 10 M 33 2[...]
-
Page 192
Rev . 0.00 5-17 ST ARLIneModeCommandSpecications 2) Model 2 Versions and Maximum Input Character Count V ersion Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanji Character 1 21 L 41 25 17 10 M 34 20 14 8 Q 27 16 1 1 7 H 17 10 7 4 2 25 L 77 47 32 20 M 63 38 26 16 Q 48 29 20 12 H 34 20 [...]
-
Page 193
Rev . 0.00 5-18 ST ARLIneModeCommandSpecications V ersion Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanji Character 16 81 L 1408 854 586 361 M 1082 656 450 277 Q 775 470 322 198 H 602 365 250 154 17 85 L 1548 938 644 397 M 1212 734 504 310 Q 876 531 364 224 H 674 408 280 173 18 89 L[...]
-
Page 194
Rev . 0.00 5-19 ST ARLIneModeCommandSpecications V ersion Number of Cells on One Side Error Correction Level Numbers English Language Characters Binary Kanji Character 31 141 L 4417 2677 1840 1 132 M 3486 21 13 1452 894 Q 2473 1499 1030 634 H 1897 1 150 790 486 32 145 L 4686 2840 1952 1201 M 3693 2238 1538 947 Q 2670 1618 1 1 12 684 [...]
-
Page 195
Rev . 0.00 6-1 ST ARLIneModeCommandSpecications 6. SPECIAL APPENDIX COMMAND LIST BY MODEL ○:ValidCommands •:ValidCommands(IndependentFunctionsonThermal/Slip) ‡:Commandwhereonlysettingsarevalid × : Invalid command (Ignored) • Standard Commands Class Commands[...]
-
Page 196
Rev . 0.00 6-2 ST ARLIneModeCommandSpecications Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Bit Image ESC K ○ ○ ○ Graphics ESC L ○ ○ ○ ESC k ○ ○ × ESC X ○ ○ × ESC ^ ○ × ○ Logo ESC FS q ○ ○ ○ ESC FS p ○ ○ ○ ESC RS L ○ ○ ○ Bar Codes ESC b ○ ○ ○ Cutter Control ESC [...]
-
Page 197
Rev . 0.00 6-3 ST ARLIneModeCommandSpecications • Raster related commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Raster ESC * r R ○ ○ × ESC * r A ○ ○ × ESC * r B ○ ○ × ESC * r C ○ ○ × ESC * r D ○ ○ × ESC * r E ○ ○ × ESC * r F ○ ○ × ESC * r P ○ ○ × ESC * r Q ○ ○ [...]
-
Page 198
Rev . 0.00 6-4 ST ARLIneModeCommandSpecications • Auto Logo Commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip Auto Logo ESC GS / W ○ ○ ○ ESC GS / C ○ ○ ○ ESC GS / 1 ○ ○ ‡ ESC GS / 2 ○ ○ ‡ ESC GS / 3 ○ ○ ‡ ESC GS / 4 ○ ○ ‡ ESC GS / 5 ○ ○ ‡ ESC GS / 6 ○ ○ ‡ ?[...]
-
Page 199
Rev . 0.00 6-5 ST ARLIneModeCommandSpecications • QR Code Commands Class Commands Class Model Name HSP7000 Set Executed Thermal Slip QR Codes ESC GS y S 0 ○ ○ ‡ ESC GS y S 1 ○ ○ ‡ ESC GS y S 2 ○ ○ ‡ ESC GS y D 1 ○ ○ ‡ ESC GS y D 2 ○ ○ ‡ ESC GS y P ○ ○ × ESC GS y I ○ ○ ○ • Page Function Com[...]
-
Page 200
Rev . 0.00 7-1 ST ARLIneModeCommandSpecications 7. SPECIAL APPENDIX COMMAND FUNCTION LIST 7-1) HSP7000 7-1-1) Setting Command List Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Font Style and ESC RS F Shared Only valid[...]
-
Page 201
Rev . 0.00 7-2 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Adornment ESC E Shared V alid V alid Shared V alid Shared ESC G Shared Invalid T wo bytes ignored Invalid Two bytes ignored [...]
-
Page 202
Rev . 0.00 7-3 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precau- tions Line/Page Other Precautions Line/Page Other Precautions Download ESC & Shared V alid V alid Shared Shared with validation V alid Shared Shared with slip ESC % Shared V alid V[...]
-
Page 203
Rev . 0.00 7-4 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, Validation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Macro ESC GS + Shared V alid V alid Shared V alid Shared Raster Mode ESC * r E Independent Station selection command dependen[...]
-
Page 204
Rev . 0.00 7-5 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Printer Driver ESC RS A Independent Station selec- tion command dependent V alid V alid only Line Page Mode: V alid after sw[...]
-
Page 205
Rev . 0.00 7-6 ST ARLIneModeCommandSpecications 7-1-2) Execution Command List Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Line spacing LF Independent Station selection command dependent V alid V alid For each Line/Pa[...]
-
Page 206
Rev . 0.00 7-7 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions External Device Drive BEL Shared V alid V alid Shared V alid Shared FS Shared V alid V alid Shared V alid Shared SUB Shared [...]
-
Page 207
Rev . 0.00 7-8 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alida- tion Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Raster Mode ESC * r D Independent Station selection command dependent Only valid for thermal V alid Invalid Data received [...]
-
Page 208
Rev . 0.00 7-9 ST ARLIneModeCommandSpecications Execution Station Thermal Slip V alidation T ype Command Thermal, Slip, V alidation Line Other Precautions Line/Page Other Precautions Line/Page Other Precautions Head Failure Detection ESC RS # Independent Station selec- tion command dependent Invalid Four bytes ignored Invalid Four by[...]
-
Page 209
Rev . 0.00 2008.09.29 Printed in Japan, 8087710 5 ELECTRONIC PRODUCTS DIVISION ST AR MICRONICS CO., L TD. 53 6 Nanatsushinya, Shimizu-ku, Shizuoka, 424-0066 Japan T el: (int+81)-54-347-01 12, Fax: (int+81)-54-347-0709 Please access the following URL ht t p : / / w w w . s t a r - m . j p / eng/dl/dl02.htm for the latest revision of the manual. OVER[...]