Impex SM-6001 manuale d’uso

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model SM-6001 Retain This Manual for Reference 06-02-08 OWNER'S MANUAL MARCY DELUXE SMITH MACHINE SM-6001 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, C[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN..................................................................................... 1 IMPORTANT SAFETY NOTICES.................................................................... 2 SMITH MACHINE HARDW ARE PACK….......…............................................. 4 SMITH MACHINE ASSEMBLY INSTRUCTIONS........[...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets away [...]

WA RNING LA BEL PLA CEMENT The w arnin g labels show n h ere have been placed on t he Cross Brace and Up per Frame. If th e labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacement s. A pply the labels in the location shown. 3[...]

SMITH MA CHINE HA RDWA RE PA CK 4[...]

SMITH MA CHINE HA RDWA RE PA CK 5[...]

SMITH MA CHINE HA RDWA RE PA CK 6[...]

SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Do not tighten al l nuts and bolts until i nstructed to do so. B.) Attach one Base Frame (#1) t[...]

DIAGRAM 1 8[...]

STEP 2 (See Diagram 2) A.) Attach the Ver tical Fr ame Base (#9) to the Cr oss Brace (#6) from the bottom. Attach the Rear Verti cal Frame ( #8) onto the Cross Br ace on the top. Align the hol es and secure them together w ith two M10 x 2 3/8” Carr iage Bol ts (#83), Ø ¾ ” W ashers (#89), and M10 Aircraft Nuts (#90) . B.) Attach the Backr est[...]

STEP 3 (See Diagram 3) A.) Attach the W eight Glide Post ( #11) to the bracket on the Ver tical Frame Base (#9). Secure i t wi th one 3 1/8” x 1 ¾ ” Bracket (#31), M10 x 2 ½” Car riag e Bolt (#84), Ø ¾” W asher (#89), and M10 Airc raft Nut (#90) to the upper hol e, one M10 x 2 ½ ” Allen Bolt (#81) and one Ø ¾ ” W asher (#89) to t[...]

DAIGRAM 3 11[...]

STEP 4 (See Diagram 4) A.) Attach the Butter fly Base (#37) to the Rear Verti cal Frame ( #8). Secure it w ith two M10 x 2 ½” Car riag e Bolts (#84), Ø ¾ ” W ashers (#89), and M10 Airc raft Nuts (#90). B.) Attach tw o Swivel Pulley Brackets (#35) to the open brackets on the Rear Ver tical Frame (#8). Secure each Br acket wi th one M10 x 2 ½[...]

CABLE LOOP DIAGRAM 13[...]

STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 142” Upper Cabl e (#40) to the front opening on the Upper Frame (#7). Attach a Pull ey (#59) to the opening . Secure it with one M10 x 2 1/8” Allen Bolt (#79) , two Ø 1 1/8” x 3/8” Pul ley Bushings ( #52), and one M10 Air craft Nut (#90) . Make sure the ball stopper on the Cabl[...]

STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach one end of the 86” Butterfly Cabl e (#42) to the cli p on the Rig ht Butterfly ( #39). Draw the Cable to the ri ght open Sw iv el Pulley Bracket (#35). B.) Attach a Small Pull ey (#58) to the Swi vel Pul ley Br acket. Secure it with one M10 x 1 ¾” Allen Bolt ( #78), tw o Ø ¾” W ash[...]

STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Inser t the tip of the 127” Low er Cable ( #41) throug h the opening on the Foot Pl ate (#26) to the opening on the Ver tical Frame Base ( #9). B.) Attach a Smal l Pulley (#58) to the opening. Attach the Foot Plate to the Fr ame. Align the holes and secure the Foot Plate, Ver tical Fr ame Base, [...]

DIAGRAM 7 17[...]

STEP 8 (See Diagram 8) A.) N OTE: Help of another person is str ongly recommended fo r this step. Place the Lifting Sleeve ( #13) in betw een the two Safety Stop Frames (#16). Al ign the hol es and insert the W eight Bar (#15) all the way through. Center the bar and use the tw o M8 x 3/8” Allen Bol ts (#86) on the tw o Saf ety Stop Frame to secur[...]

SMITH CAGE EXPLODED DIAGRAM 19[...]

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Bas e Fram e 2 51 Ø 1” x 5/8” Pulley Bushing 2 2 F ront Vertic al Fram e 2 52 Ø 1 1/8” x 3/8” Pulley Bushing 2 3 Lef t Vertic al Fram e 1 53 Ø 1” x ¾” Pulley Bushing 2 4 Right Ver tical Fr am e 1 54 1 ½” Sleeve 4 5 F ront T op Beam 1 55 5 ¾” x 2” Rubber Bumper 2 6 Cr oss Br ace 1 56 3 [...]

MULTI-PURPOSE BENCH HA RDWA RE PA CK 21[...]

MULTI-PURPOSE BENCH A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Attach the Main Fra me (#1 ) to th e Rear Stab ilizer (#8). B.) Secur e it w ith tw o[...]

STEP 2 (See Diagram 2) A.) Attach the Seat Suppor t Frame (#11) onto the Main Frame ( #1). Secure it w ith one M10 x 3 1/8” Carr iage Bol t (#41), Ø ¾” W asher (#33), and M10 Aircr aft Nut (#35). B.) Attach the M ain Seat Support (#2) onto the Seat Support Frame. Secur e it wi th one M10 x 3 1/8” Carr iage Bol t (#41), Ø ¾” W asher (#33[...]

STEP 3 (See Diagram 3) A.) Al ign the br acket on the Backrest Adjustment Support ( #9) in betw een the two Backrest Supports (#4) . Secure it w ith f our M8 x 1 5/8” Allen Bolts ( #37), eig ht Ø 5/8” W ashers (#32), and four M8 Ai rcraft Nuts (#34) . Do not tighten the N uts and Bolts yet. B.) Inser t the Backrest Adjustment Support ( #9) int[...]

STEP 4 (See Diagram 4) A.) Pl ace the Seat Pad (#15) onto the Front & R ear Seat Brackets (#6 & 7) . Secure it with four M8 x 1 5/8” Allen Bol ts (#37) and Ø 5/8” W ashers (#32). B.) Attach the Backr est Board (#16) to the tw o Backrest Supports (#4). Secure it w ith four M8 x 1 5/8” Allen Bol ts (#37) and Ø 5/8” W ashers (#32). C[...]

STEP 5 (See Diagram 5) A.) Inser t the Leg Dev eloper Holder into the M ain Seat Support (#2) . B.) Thread a Lock Knob ( #22) into the Nut on the M ain Seat Support (#2) to hold the Leg Devel oper Holder (#5) at desir ed height. C.) Attach the Leg Developer (#3) to the open bracket on the Leg D eveloper Holder. Secur e it with an Ax le (#31), two M[...]

27[...]

MULTI-PURPOSE BENCH PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 M ain Seat Support 1 3 Leg Devel oper 1 4 Backrest Support 2 5 Leg Dev eloper Hol der 1 6 Fr ont Seat Bracket 1 7 R ear Seat Bracket 1 8 Rear Stabilizer 1 9 Backr est Adjustment Support 1 10 Backrest Adjustment Lever 1 11 Seat Support Frame 1 12 Foam Tube 2 13 4 ¾” Cur v[...]

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree f rom def ects in work m ans hip and m aterial, under norm al use and service conditions, for a period of two years on the Fram e fr om the date of purc hase. T his warranty extends only to the original purc haser. IMPEX 's obligation under this[...]