Star Micronics TUP900 manuale d’uso

Product Specifications Manual TUP900 Series Rev. 0.01 Star Micronics Co., Ltd. Special Products Operating Division[...]

Rev 0.01 TUP900 Series Specifications Manual i --- C O N T E N T S --- 1. GENERAL DESCRIPTION ................................................................................................................... 1-1 2. PRINTER CONFIGURATION ...............................................................................................................[...]

Rev 0.01 TUP900 Series Specifications Manual ii 5-2 Static Electricity Tolerance (ESD) ......................................................................................................... 5-2 5-3 AC Line Noise Tolerance ...................................................................................................................... 5-2 5-[...]

Rev 0.01 TUP900 Series Specifications Manual 1-1 1. GENERAL DESCRIPTION The TUP900 series is a direct line thermal printer capable of high speed printing that employs a thermal line dot printing system and is composed of a unit comp rising thermal paper roll storage. This type is used, embedded in electronic devices such as games, ATM, and informat[...]

Rev 0.01 TUP900 Series Specifications Manual 2-1 2. PRINTER CONFIGURATION 2-1 Basic Configuration This unit is composed of module s. The configuration is shown below. TUP992-24/TUP992-24 J1 (Thermal line unit printers) Thermal mechanism module (TMP900 Series) Presenter module (PR900 Series) Control board module (TBD900 Series) Power connector cabl [...]

Rev 0.01 TUP900 Series Specifications Manual 3-1 3. BASIC SPECIFICATIONS 3-1 Printing Specifications (1) Print Method: Direct Thermal Line Printing (2) Dot Configuration: 832 dots/line (3) Dot Density: 8 dots/mm (203 DPI) (4) Printing Region: Maximum 104 mm (See figure below) Notes 1) The mechanism can handl e paper widths of 79.5 ±0.5 to 111.5 ±[...]

Rev 0.01 TUP900 Series Specifications Manual 3-2 3-2 Character Specifications and Bar Code Specifications 3-2-1 STAR Line Mode Item Contents Standard Specifications Alphanum er ic Characters 95 Characters Expanded Graphics 128 Characters International Characters 32 Characters Alphanumeric Characters 95 Characters Expanded Graphics 128 Characters JI[...]

Rev 0.01 TUP900 Series Specifications Manual 3-3 3-2-2 STAR Page Mode Item Contents Small Characters Alphanumeric Characters and Others 220 Characters International Characters 32 Characters Alphanumeric Characters and Others 220 Characters Standard Characters International Characters 32 Characters Single Byte Characters Alphanumeric Characters and [...]

Rev 0.01 TUP900 Series Specifications Manual 3-4 3-3 Paper Specifications 3-3-1 Thermal Paper roll (1) Paper Width: 79.5 ±0.5 mm to 111.5 ±0.5 mm (Rolled Dimensions: 80 +0.5/-1 t o 112 +0.5/-1 mm) (2) Paper Thickness: 65 to 150 µm (3) Paper roll Outer Diameter: M aximum φ 150 mm Note 1) Use of optional parts enables up to φ 254 mm. (4) Shaft C[...]

R e v 0 . 0 1 Head Adjust Lever Head Adjust Lever Fig. 3.3.1.6.A Normal Position 3-6 Fig. 3.3.1.6.B Position for Thick Paper TUP900 Series Specifications Manual[...]

Rev 0.01 TUP900 Series Specifications Manual 3-6 (7) Weight Shaft and Loop Guide on the Presenter Module The TUP900 Series printers require the accessory weight shaft and loop guide for the thickness of the paper to be used to ensure the smooth feedi ng of paper. See the table below for the optimum mechanism statu s. • When 65 µm ≤ Paper Thi c[...]

Rev 0.01 TUP900 Series Specifications Manual 3-7 3-3-2 Black Mark Specifications The following describes the re commended black mark s pecifications for printers that use the paper out sensor as the black mark sensor. (1) Black Mark Pitch (Dimensi on A) Black mark pitch can be set to a dimensio n of A = 75 to 300 mm. Note 1) Black mark pitches can [...]

Rev 0.01 TUP900 Series Specifications Manual 3-8 (4) Top Margin (Dimension B) Set the printing range, leaving plenty of top margin from the cutting position. When not reversing paper fee d, a top margin with a minimum total of 19 mm is recommended with the distance of 15 mm from the thermal head heating el ements to the cutting p osition and the em[...]

Rev 0.01 TUP900 Series Specifications Manual 3-9 3-4 Thermal Mechanism Module 3-4-1 Thermal Head (1) Thermal Element Configuration: 2 elements/dot (2) Number of Thermal Elements: 832 dots (3) Thermal Element Scanning Density: 0.125 mm/dot (8 dots/mm) (4) Average Resistance Value: 800 Ω ±3% (initial value) (5) Drive Power Voltage: Head drive Vh 2[...]

Rev 0.01 TUP900 Series Specifications Manual 3-10 3-5 Presenter Module 3-5-1 Feed Rollers (1) Feed Method: Friction Method (2) Paper Feed Speed: 300 mm/s Note 1) Paper feed speed varies acco rding to the ambient environment and t he thickness of the paper used. 3-5-2 Paper Feed Motor (1) Format: DC Brush Motor (2) Drive Voltage: 24 VDC ±10% 3-5-3 [...]

Rev 0.01 TUP900 Series Specifications Manual 3-11 3-6 Paper Roll Supply Module 3-6-1 Paper Roll Holder (1) Paper roll Support Method: Shaft Support Method Using the Paper roll Holder (Fixed Shaft Unit) (2) Paper Tube: Inner Diameter φ 1 Inch Paper Tube ( φ 25 .4 ±1 mm) Inner Diameter φ 2 Inch Paper Tube ( φ 50.8 ±1 mm) Inner Diameter φ 3 Inc[...]

Rev 0.01 TUP900 Series Specifications Manual 3-12 3-7 Reliability Specifications 3-7-1 Thermal Mechanism Module (1) Life: 15 million lines (2) MCBF: 37 million lines Note 1) If the recommended paper is not used, the life of the printer cannot be guara nteed. Always use the recommended paper types. 3-7-2 Thermal Head (1) Life: Withstanding of wear: [...]

Rev 0.01 TUP900 Series Specifications Manual 4-1 4. EXTERNAL SPECIFICATIONS 4-1 External Specifications 4-1-1 External Dimensions TUP992-24/TUP992-24 J1: Width: 192 mm × Depth: 249.3 mm × Height: 179 mm Note 1) These dimensions do not include p aper roll or optional parts. 4-1-2 External Drawings See Fig. 4.1.2 on the separate sheet. 4-1-3 Mass 2[...]

R e v 0 . 0 1 ries Specifications Manual 4-2 Fig. 4.1.2 External Dimensions Diagrams TUP900 Se Paper width center 4 b a 80 80 94.6 90.1 17.1 249.3 117.5 102 34 34 34 2 2 11 SW1 SW2 LED2 LED1 PULL A Paper width center d c 131.8 34 102 34 34 88.1 88.1 9 176.2 6.8 192 (4) (126.3) 17.1 1.5 84.8 32.4 58 133.7 116.6 17.1 146 179 73 (207) DC24V (117.1) (1[...]

Rev 0.01 TUP900 Series Specifications Manual 5-1 5. ENVIRONMENT SPECIFICATIONS 5-1 Temperature and Humidity 5-1-1 When Operating (1) Temperature: 0 to 50°C However, printing is guaranteed at 5 to 50° C (2) Humidity: 10 to 80% RH However, there must be no conden sation. Assumes 80% RH at 34°C Note 1) When using the optional powe r adapter se t, b[...]

Rev 0.01 TUP900 Series Specifications Manual 5-2 5-2 Static Electricity Tolerance (ESD) Direct Electrical Discharge: Contact discha rge ±6 kV (individual unit) Air discharge ±8 kV (individual unit) Indirect Discharge: ±6 kV (individual unit) ±4 kV (Checke r connection) Note) When usi ng the optional power adapter (PS60L – 24A ). 5-3 AC Line N[...]

Rev 0.01 TUP900 Series Specifications Manual 6-1 6. SAFETY 6-1 Standard CE Marking EMC Instruction CE Marking CE Marking Low voltage instruction FCC Class A VCCI Class A EMI Standard EN55022 Class B Note 1) When using the optional power ada pter (PS60L – 24A). Federal Communications Commission Radio Frequ ency Interfer ence Statement This equipme[...]

Rev 0.01 TUP900 Series Specifications Manual 7-1 7. USAGE EXAMPLE (LAYOUT EXAMPLE) 7-1 Control Board Layout This unit is mounted with the control board (PCB cha ssis) shown in Fig. 4.1.2 at the time of shipment. It is possible, however, to change the position of the control board according to the conditio ns of use. Notes 1)Changes to the co ntrol [...]

R e v 0 . 0 1 ries Specifications Manual 7-2 90.1 94.6 80 80 207 179 116.6 17.1 (13.7) 146.8 20.7 Paper width center 40.5 246.1 128.6 230.3 45.1 LED2 LED1 SW2 SW1 PULL 176.2 88.1 88.1 34 34 34 102 117.5 17.1 Paper width center 1 1 2 2 9 Fig. 7.1.1 Control Board Layout 2 133.7 (117.1) TUP900 Se[...]

R e v 0 . 0 1 ries Specifications Manual 7-3 80 80 94.6 90.1 TUP900 Se 133.7 (117.1) Fig. 7.1.2 Control Board Layout 3 207 40.5 230.3 45.1 116.6 17.1 Paper width center 88.1 88.1 9 176.2 17.1 117.5 102 34 34 34 PULL 22 11 128.6 246.1 148.5 19 Paper width center SW1 SW2 LED1 LED2 179 (13.7)[...]

R e v 0 . 0 1 ries Specifications Manual 7-4 Fi g . 7.2 RHU-T900 External Dimensions Dia g rams E-E Section 34 1 1 80 +0.5 -1 (roll width min.) 112 +0.5 -1 (roll width max.) 127.5 114 13.5 34 34 102 102 34 34 34 192.1 97.1 95 95 88.1 88.1 80 80 Paper width center 82.5 82.5 112 112 209.2 94.4 27.4 104.6 144.6 184.6 D 176.2 Paper width center 88.1 88[...]

R e v 0 . 0 1 68 166 166 102 102 176.2 88.1 88.1 PULL Paper width center 68 112 112 82.5 82.5 280 320.4 437.9 311.6 209.2 116.6 117.5 58 1.5 84.8 179 ries Specifications Manual 7-5 Fig. 7.2.1 Horizontal Layout TUP900 Se[...]

R e v 0 . 0 1 ries Specifications Manual 7-6 Fig. 7.2.2 Vertical Layout TUP900 Se 1 1 68 62.6 83 27.4 234.9 117.4 116.6 117.5 1.5 294 388.2 355.2 209.2 104.6 97.1 Paper width center 230.3 133.2 229.9 146.8 Damper Roller[...]

Rev 0.01 TUP900 Series Specifications Manual 8-1 8. SETTING UP THE PRINTER UNIT 8-1 Mounting the Units 8-1-1 Mounting the Printer Unit Use the four holes a, b, c and d s hown in the external drawing of Fig. 4.1.2 on the separate sh eet to fasten the printer unit. Also, it is recommended the unit be fastened u sing M4 screws with washers. Notes 1)De[...]

Rev 0.01 TUP900 Series Specifications Manual 8-2 8-3 Adjusting the Paper roll Holder Unit It is necessary to adjust the paper roll holder for the width of the paper you use. If the setting position is incorrect, the paper roll will be supplied improperly to the me chanism which in turn causes paper transport problem s . Thus , it is should be prope[...]

R e v 0 . 0 1 Align paper roll edge with reference a'. Align paper roll edge with reference a'. Align paper roll edge with reference c'. Align paper roll edge with reference c'. Align paper roll edge with reference b'. Align paper roll edge with reference b'. 2 (Reference Pitch) 2 (Reference Pitch) Fig. 8.3.A Fig. 8.3.[...]

Rev 0.01 TUP900 Series Specifications Manual 8-4 8-4 Mounting the Friction Spring It is necessary to adjust the friction spring position for the width of the paper you inte nd to use. If the setting position is incorrect, the paper roll will be supplied improperly to the me chanism which in turn causes paper transport problem s . Thus , it is shoul[...]

R e v 0 . 0 1 ries Specifications Manual 8-5 Fig. 8.4.1.C Touch to boss. Touch to boss. Fig. 8.4.1.A A B C C' B' A' TUP900 Se A 82.5 82.5 112 112 82.5 82.5 112 112 112 112 82.5 82.5 Fig. 8.4.1.A lign notch with reference center. Align notch with reference center. Reference a' Reference a Boss 2 (Pitch) 2 (Pitch) Reference b&apos[...]

R e v 0 . 0 1 83 82.5 25.7 102 176.2 Paper width center 88.1 88.1 102 A B C D 21.8 0 -0.2 21.8 0 -0.2 4-M3 112 4-M3 21.8 0 -0.2 21.8 0 -0.2 55.2 83 D C B A 102 88.1 88.1 Paper width center 176.2 102 Fig. 8.4.2.A For Paper Widths of 111.5 0.5 mm s Manual 8-6 Fig. 8.4.2.B For Paper Widths of 82 0.5 mm TUP900 Series Specification[...]

R e v 0 . 0 1 80 23.2 4-M3 21.8 0 -0.2 21.8 0 -0.2 D C B A 88.1 88.1 Paper width center 176.2 102 83 102 ries Specifications Manual 8-7 Fig. 8.4.2.C For Paper Widths of 79.5 0.5 mm TUP900 Se[...]

Rev 0.01 TUP900 Series Specifications Manual 8-8 8-5 Adjusting the Near End Sensor It is necessary to adjust the near end sensor to detec t the remaining amount of paper roll. To adjust the position of the near end sensor, adjust the roll diamet er direction that determine s the adjustment of the paper width to correspond to the paper roll wi dth a[...]

Rev 0.01 TUP900 Series Specifications Manual 8-9 (2) Optional High Volume Paper Roll Supply (RHU-T900) The method to adjust the near end sensor when u s ing the optional high volume paper roll supply, is basically the same as that used for the printer unit. However, be aware that the difference in the setting po sitio n of the paper roll (the posit[...]

R e v 0 . 0 1 1.5 - 2.0mm Screw Fig. 8.5.1.A Near-end Sensor Edge Near-end Sensor Movement Direction Roll Paper s Manual 8-10 Fig. 8.5.1.B TUP900 Series Specification[...]

R e v 0 . 0 1 1 1 1 Fig. 8.5.2.A Near-end Sensor Plate Notch Mark Pressure Direction Adjustment Screw Paper Roll Diameter Direction Movement Reference "a" Reference "b" Reference "c" Mark (1) 3.25 (Pitch) Reference "a" Reference "b" Reference "f" Reference "e" Reference "d&q[...]

Rev 0.01 TUP900 Series Specifications Manual 9-1 9. HANDLING THE PRINTER UNIT 9-1 Precautions Regarding Designs 1. If the positional relationship of the printer unit and the paper roll holder mounting is poor, pape r can skew, the ends of the paper become cre ased or the pap er jam. For that reason, be very careful in how the paper roll is supplied[...]

Rev 0.01 TUP900 Series Specifications Manual 9-2 18. This unit is provided with an auto-cutter as st andard equipment, but absolutely never approach the auto-cutter blades while the cutter is operating becau s e it is extremely dangerous. Also, if the cutter stops, absolutely never touch the blades directly with your fingers. 19. Never unnecessaril[...]

Rev 0.01 TUP900 Series Specifications Manual 9-3 9-4 How to Set the Paper roll Set the paper roll as shown in the followin g procedures.  Procedure 1. Open the frame for fastening the mechanism (me chanism and presenter). Hold the unit holder, as shown in Fig. 9.4 A, and open the frame for fastening the mecha nism. Then, lift the handle toward t[...]

R e v 0 . 0 1 Fig.9.4.A. Handle Manual 9-4 Fig.9.4.B. TUP900 Series Specifications[...]

R e v 0 . 0 1 Fig. 9.4.C. Heat-sensive Side (Recording Side) 9-5 Fig. 9.4.D TUP900 Series Specifications Manual[...]

R e v 0 . 0 1 s Manual 9-6 Fig.9.4.F TUP900 Series Specification Fig.9.4.E Damper rollers Paper inlet Paper guide[...]

Rev 0.01 TUP900 Series Specifications Manual 9-7 9-5 Performing Maintenance 9-5-1 Cleaning the Thermal Head and Platen To ensure long-term and stable printing, periodi ca lly clean the thermal head and the platen. It is recommended that you clean every 500,000 line s. The thermal head and platen can be cleaned by ope ning the platen unit with the r[...]

R e v 0 . 0 1 s Manual 9-8 Fig.9.5.2. Knob Release lever Lock lever TUP900 Series Specification[...]

Rev 0.01 TUP900 Series Specifications Manual 10—1 10. Control board module (TBD900 Series) Refer to the separate TBD900-24-A / PBD-9 Secification Manual for details. H o w e v e r, the Pa p e r End N ear S e nsor U n it ( NEU- T 900 ), Con t r o l Pa n e l U n it ( OPA- T 900 ) , and t h e P o w e r C on nector Cable (PBD-9), which are optiona l [...]

Rev 0.01 TUP900 S e ries Specifications Manual 11— 1 11. Power connector cable module (PBD-9) Refer to the separate TBD900-24-A / PBD-9 Secification Manual for details.[...]

200 3 .03 . 1 2 Printed in Japan, 8087 4 5 55 OVERSEAS SUBSIDIARY COMPANIES STAR MICRONICS AMERICA, INC. 1150 King Georges Post Road, Edison, NJ 08837-3729 U.S.A. Tel : 732-623-5555 Fax : 732-623-5590 http://www.starmicronics.com ELECTRONIC PRODUCTS DIVISION STAR MICRONICS CO., LTD. 536 Nanatsushinya, Shimizu, Shizuoka, 424-0066 Japan Tel : 0543-47[...]