Go to page of
Similar user manuals
-
Server
Raritan Computer DKX2-132
14 pages 0.68 mb -
Security Camera
Raritan Computer DSX-0N-E
233 pages 3.34 mb -
Switch
Raritan Computer P2UMT832M
6 pages 0.94 mb -
Network Card
Raritan Computer Raritan ASMI G4
115 pages 3.42 mb -
Network Router
Raritan Computer DKX232
106 pages 2.77 mb -
Switch
Raritan Computer KSX II
362 pages 4.79 mb -
Server
Raritan Computer DKX2-216
14 pages 0.68 mb -
Switch
Raritan Computer DKX2-V2.3.5-0N-E
351 pages 4.28 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Raritan Computer DPX-OG-E, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Raritan Computer DPX-OG-E one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Raritan Computer DPX-OG-E. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Raritan Computer DPX-OG-E should contain:
- informations concerning technical data of Raritan Computer DPX-OG-E
- name of the manufacturer and a year of construction of the Raritan Computer DPX-OG-E item
- rules of operation, control and maintenance of the Raritan Computer DPX-OG-E item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Raritan Computer DPX-OG-E alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Raritan Computer DPX-OG-E, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Raritan Computer service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Raritan Computer DPX-OG-E.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Raritan Computer DPX-OG-E item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
Dominion® PX User Guide Release 1.1.0 Copyright © 2008 Raritan, Inc. DPX ‐ 0G ‐ E March 2008 255 ‐ 80 ‐ 6080 ‐ 00 [...]
-
Page 2
This document contains proprietary in formation that is protected by copyright. All rights reserved. No part of this document may be photocopied, reproduced, or translated into another language without express prior written co[...]
-
Page 3
iii To avoid potentially fatal shock hazard and possible damage to Raritan equipment: SYSTEMS SHOULD ONLY BE CONFIGURED BY A COMPETENT PERSON. IT IS ESSENTIAL THAT THIS EQUIPMENT IS CONNECTED TO AN ELECTRICAL SUPPLY TH[...]
-
Page 4
Product Models iv Provide an earthing connection before the mains plu g is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pul ling out the mains plug from the mains. [...]
-
Page 5
v Contents Safety Guidelines iii Chapter 1 Introduction 1 Product Models.......................................................................................................................................... 1 Product Photos ..................................................................................................................[...]
-
Page 6
Contents vi Back Panel................................................................................................................................................. 20 Power Cord ........................................................................................................................... ........ 20 Outlets.................[...]
-
Page 7
Contents vii Setting Up External User A uthentication ............................................................................................. 62 Settings Up LDAP Authentication ............................................................................................. 63 Setting Up Outlets and Pow[...]
-
Page 8
Contents viii Deleting Outlet Group Devices ................................................................................................ 106 Chapter 6 Integration 107 Dominion KX ......................................................................................................................................... 108 KX Ma[...]
-
Page 9
Contents ix Querying an Outlet Sensor................................................................................................................... 130 Appendix D Using SNMP 131 Enabling SNMP ..................................................................................................................................... 132[...]
-
Page 10
Contents x Get Power Cycl e Delay Command .......................................................................................... 152 IPMI Privilege Levels ......................................................................................................................... ... 152 Appendix F Event Types 153 Appendix G[...]
-
Page 11
1 The Dominion PX unit is an intelligent power distribution unit that allows you to reboot remote servers and other network devic es, and monitor power in the data center, through Rarita n ʹ s KVM switches and Secure [...]
-
Page 12
Product Photos 2 Zero U Size 1U Size [...]
-
Page 13
Chapter 1: Introduction 3 2U Size Product Features All models and sizes of the Dominion PX provide the followin g features: • The ability to control outlets collectively and individually • The ability to power on, power off[...]
-
Page 14
Package Contents 4 • The ability to monitor the internal, CPU temperature of the Dominion PX • The ability to monitor environmental factors such as external temperature and humidity • An audible alarm (beeper) and a visua l [...]
-
Page 15
Chapter 1: Introduction 5 2U Products • Dominion PX unit includ ing power cord 1.8 0m (6 feet) • 2U bracket pack and screws • Null ‐ modem cable with RJ ‐ 45 and DB9F connectors on either end [...]
-
Page 16
6 In This Chapter Rack Mount Safety Guidelines......................................................................... 6 Tool ‐ less Mo unting Instruct ions ...................................................................... 8 Rack Mount Safety Guidelines In Raritan products which require Rack ?[...]
-
Page 17
Chapter 2: Rack-Mounting the Dominion PX 7 Side Fixing End Fixing Blind Fixing [...]
-
Page 18
Tool-less Mountin g Instructions 8 Tool-less Mounting Instructions The Zero U units also ship with a tool ‐ less mounting kit consisting of a claw feet with a silver button on one side. These work by attaching to the back side ?[...]
-
Page 19
Chapter 2: Rack-Mounting the Dominion PX 9 To Mount: • Snap fit the claw feet mounts onto the back of the Dominion PX unit. Leave at least 24 inches bet ween the buttons for stability. Once the claw feet are mounted on th[...]
-
Page 20
10 This chapter explains how to instal l a Dominion PX unit and configure it for network connectivity. In This Chapter Before You Begin.............................................................................................. 10 Connect the Dominion PX t[...]
-
Page 21
Chapter 3: Installation and Configuration 11 Fill Out the Equipment Setup Worksheet An Equipment Setup Worksheet is provided in Appendix B (se e ʺ Equipment Setu p Worksheet ʺ on page 121). Use this worksheet to record the mode l, serial number, and[...]
-
Page 22
Connect the Dominion PX to Your Network 12 2. Plug the other end of the null ‐ modem cable (containing the DB9 connector) into the serial port (COM) of the computer. Connect the Dominion PX to Your Network To use the Web interface ?[...]
-
Page 23
Chapter 3: Installation and Configuration 13 Bits per second = 9600 Data bits = 8 Stop bits = 1 Parity = None Flow control = None Note: The “Flow control” param eter must be set to “None” for the ?[...]
-
Page 24
Configure the Dominion PX for Network Connectivity 14 Note: The Dominion PX ʹ s IP address is autom atically disp layed in the system prompt. The default IP address is 192.168.0.192. The default IP configurat ion meth od is DHCP, and the [...]
-
Page 25
Chapter 3: Installation and Configuration 15 8. By default, the LAN inter face speed is set to Auto, wh ich allows the system to select the optimum speed. To keep the default, press Enter. To set the speed to 10 or 100 [...]
-
Page 26
Resetting to Factory Defaults 16 If you want to termina te the configuration process, type c and press Enter . The configuration is cancelled and you are returne d to the opening prompt as shown in the screenshot of Step ?[...]
-
Page 27
Chapter 3: Installation and Configuration 17 • Baud rate (bits per second) = 9600 • Data bits = 8 • Stop bits = 1 • Parity = None • Flow control = None 1. Press (and release) the Re set button of DPX while pressing ?[...]
-
Page 28
Resetting to Factory Defaults 18 Note: Enter ʺ help ʺ to show a li st of avail able command and a short description of each one. HyperTerminal is avai lable on many Windows OS. But HyperTerminal is not avail able on Windows Vi[...]
-
Page 29
19 This chapter explains how to use the Do minion PX unit. It describes the LEDs and ports on the front and back pane ls of the Domi nion PX, and explains how to use the display panel. It also explains [...]
-
Page 30
Back Panel 20 LAN Connecting the Dominion PX to your company ʹ s network Connect a standard Category 5e UT P cable to this port and connect the other end to your network. This connection is necessary to admin ister th[...]
-
Page 31
Chapter 4: Using the Dominion PX 21 Outlets The number of outlets on the back panel depends upon the Dominion PX model. To the upper left of each outlet is a small LED. The units are shipped from the factory with all ?[...]
-
Page 32
Back Panel 22 LED Display The LED display is located adjacent to the outlets on the Zero U model, and on the back right of the 1U and 2U models. The following pictu re shows the LED display. [...]
-
Page 33
Chapter 4: Using the Dominion PX 23 The LED display consists of these components: • A lower row displaying two digits • An upper row disp laying three digits • Up and Down buttons Note: The small hole between the lower ro[...]
-
Page 34
Circuit Breaker 24 Tip: A quick way to distin guish between voltage, current, and power is the placement of the decimal point in the display. Voltage has no decimal point, current has a decimal point between the first [...]
-
Page 35
Chapter 4: Using the Dominion PX 25 Beeper The Dominion PX includes a be eper. It will ring if any of the circuit breakers is tripped or if the control board temperature sensor exceeds 80 degrees Celsius (or 176 degrees Fahren[...]
-
Page 36
26 This chapter explains how to use the Web interface to administer a Dominion PX. In This Chapter Logging into the Web Inter face ..................................................................... 26 Using the Web Interface ..................................[...]
-
Page 37
Chapter 5: Using the Web Interface 27 where <ip address > is the IP address of the Dominion PX. A Login dialog appears. 2. Type your user name and passwor d in the Username and Password fields. Both the user na[...]
-
Page 38
Logging into the Web Interface 28 3. Click Login . The Home window appears. [...]
-
Page 39
Chapter 5: Using the Web Interface 29 Note: The Home window shown above shows 8 outlets. If yo ur Dominion PX has 20 outlets, the Home window will show all 20. Java script must be enabled in the web browser for proper [...]
-
Page 40
Using t he Web In terfa ce 30 Changing Your Password To change your passwor d: 1. Choose User Man agement ‐‐ > Change Passwor d . The Change Password window appears. 2. Type your existing password in the Old Password field. 3. Type your [...]
-
Page 41
Chapter 5: Using the Web Interface 31 Menus There are several menus in the Web interfac e: • Power Outlets • Alerts • User Management • Device Settings • Maintenance • Outlet Groups Options The following figure shows a complete list of ?[...]
-
Page 42
Using t he Web In terfa ce 32 How to Select an Option There are two ways to select an option from a menu: • Click the menu name to di splay a window listing each option, and then click the option you want to select it. ?[...]
-
Page 43
Chapter 5: Using the Web Interface 33 • Information about the Dominion PX, includin g: Model name and number IP address Firmware version • Information about all the users currently connected, in cluding user name, IP address, and curr ent[...]
-
Page 44
Using t he Web In terfa ce 34 Status Messages When you perform an operation from the Web interface, such as crea ting a user profile or changing a network setting, a message appears at the top of the window that indicates whet[...]
-
Page 45
Chapter 5: Using the Web Interface 35 Unavailable Options At times, certain action s will be unavailable. When this occurs, the appropriate buttons will be non ‐ functional, though different browsers may displ ay thi s differently. For example: if [...]
-
Page 46
Using the Home Window 36 Using the Home Window The Home window is the first window to appear after a success ful login. It consists of a Globa l Status , an Outlets list, and an All Outlets Control panel. The home window also [...]
-
Page 47
Chapter 5: Using the Web Interface 37 Outlets List The Outlets List displays each ou tlet on the Dominion PX as a tabl e row with a view of the power status, the RMS current and the RMS Power through the individual outlet. [...]
-
Page 48
Using the Home Window 38 Display Additional Details To display addition al details about an o utlet, click the outlet name. This displays the Outlet Details window (re fer to Figure 49 for a picture of the window). This window gives t[...]
-
Page 49
Chapter 5: Using the Web Interface 39 Setting Up User Profiles The Dominion PX is shipped with one user profile built in. This is the Admin profile, which was used for the origina l login. This profile has full system and outlet p[...]
-
Page 50
Setting Up User Profiles 40 Note: Before entering any information in the user profile, please make sure the User Group is created and avai lable fo r selection. 2. In the User Management panel, type the follow ing information ?[...]
-
Page 51
Chapter 5: Using the Web Interface 41 Note: New user name , Pa ssword , and Confirm Password are the only required fields. 3. Select a User Group from the drop ‐ down list in the User Group field. The User Group determines th[...]
-
Page 52
Setting Up User Profiles 42 Modifying a User Profile Every user with user management permissions can modify a user pr ofile . (Refer to “ Settin g the Syst em Permissions (on page 44)” secti on for information about setting user permissions.)[...]
-
Page 53
Chapter 5: Using the Web Interface 43 2. Select the use r from the drop ‐ down list in the User (not in group) field. The drop ‐ down list shows all user profiles that have NOT been assigned to a User Group. 3. Set the [...]
-
Page 54
Setting Up U ser Groups 44 Creating a User Group To create a User Group: 1. Choose User Man agement ‐‐ > Users & Groups . The User/Group Management window appears. This window is divided into a User Management panel and a Group [...]
-
Page 55
Chapter 5: Using the Web Interface 45 2. Select the User Group from the drop ‐ down list in the Group field. The permissions that apply to this group are displayed. If this is the first time you are setting the permis[...]
-
Page 56
Setting Up U ser Groups 46 4. When you ar e finished, click Apply . The permissions are applied to the User Group. Note: The User (not in group) field on this window is us ed to set individual user permissions. If yo u [...]
-
Page 57
Chapter 5: Using the Web Interface 47 Setting the Outlet Permissions Setting outle t permissions allows you to specify which outlets members of a User Group are permitted to access. When you first create a User Group, all outlet permissions ?[...]
-
Page 58
Setting Up U ser Groups 48 3. Set the permissions as nec essary. Click this icon in a field and select either Yes or No . 4. When you ar e finished, click Apply . The permissions are applied to the User Group. Note: [...]
-
Page 59
Chapter 5: Using the Web Interface 49 Note: To modify a User Gro up ʹ s system or outlet permissions, repeat the procedure for setting the system or out let permissions described above and make any necessary cha nges. Deleting a User Grou[...]
-
Page 60
Setting Up Access Controls 50 Configuring the Firewall The Dominion PX has a firewall that can be configured to prevent specific IP addresse s and ranges of IP addresses from accessing the Dominion PX. When the Dominion PX was ini[...]
-
Page 61
Chapter 5: Using the Web Interface 51 Change the Default Policy Once enabled, the firewall has a default policy built in that accep ts traffic from all IP addresse s. This means any IP add resses not dropped by a specific rule will be[...]
-
Page 62
Setting Up Access Controls 52 2. Make sure the checkbox labeled Enable IP Acc ess Control is checked. Create specific rules. Th e f ollowing explains how: Action Do this... Add a rule to the end of the rules list • Type an IP address and sub[...]
-
Page 63
Chapter 5: Using the Web Interface 53 2. Click Apply . The rules are applied. Delete Firewall Rules To delete a firewall rule: 1. Choose Device Settings ‐‐ > Se curity . The Security Settings wi ndow appears. 2. Make sure the checkbox labeled ?[...]
-
Page 64
Setting Up Access Controls 54 2. Click the checkbox labeled Enable Group bas ed System Access Control . This enab les the feature. 3. Click Apply . Group based access control rules are enabled. Change the Default Action The default action is [...]
-
Page 65
Chapter 5: Using the Web Interface 55 Action Do this... Add a rule to the end of the rules list • Type a starting IP addr ess in the Starting IP fie ld. • Type an ending IP address in the E nding IP field. • Select a [...]
-
Page 66
Setting Up Access Controls 56 2. Make sure the checkbox labeled Enable Group based System Access Control is checked. 3. Type the number of the rule to be deleted in the Rule # field. 4. Click Delete . The rule is removed ?[...]
-
Page 67
Chapter 5: Using the Web Interface 57 Enable Login Limitations Login limitat ions allow you to determ ine whether more than one perso n can use the same login at the same time, and whether or not users will be required to change p[...]
-
Page 68
Setting Up Access Controls 58 Enable Strong Passwords Forcing users to create strong passwords makes it more difficult for intruders to crack user pass word s and access the Dominion PX un it. Strong passwords should be at least eight [...]
-
Page 69
Chapter 5: Using the Web Interface 59 3. Make any nec essary changes to the default settings. 4. When you ar e finished, click Apply . The changes are applied. Setting Up a Digital Certificate The purpose of an X.509 digital certificat e is to ?[...]
-
Page 70
Setting Up a Digital Ce rtificate 60 Creating a Certifi cate Signing Request To create a CSR: 1. Choose Device Setting ‐ ‐ > Certificat e . The first pa ge of the SSL Server Certificate Manag ement window appears. 2. Provide the information request[...]
-
Page 71
Chapter 5: Using the Web Interface 61 State/Province The state or provi nce where your company is located Country (IS O code) The country where your company is located. Use the standard ISO code. For a list of ISO codes[...]
-
Page 72
Setting Up Exte rnal User Authentication 62 2. Type the path and name of the certificat e file in the SSL Certif icate File field, or click Browse and select the f ile. 3. Click Uplo ad . The certificat e is installed on the Domin[...]
-
Page 73
Chapter 5: Using the Web Interface 63 Settings Up LDAP Authentication To set up LDAP authentication: 1. Choose Device Settings ‐‐ > Authentication . The Authentication Settings window appears. The LDAP parameters appe ar on the left side of the [...]
-
Page 74
Setting Up Exte rnal User Authentication 64 6. Type the base DN in the Base DN of user LDAP server fiel d. The base distinguished name (DN) is the top level of the LDAP director y tree. It indicates where in the LDAP d[...]
-
Page 75
Chapter 5: Using the Web Interface 65 5. By default, the Dominion PX uses the st andard RADIUS port 1812 (authentication) and 1813 (accounti ng). If you prefer to use non ‐ standard ports, change the ports. 6. Type the timeout period ?[...]
-
Page 76
Setting Up Outlet s and Power Threshold s 66 Setting the Default Outlet State Sets a global default for the power state of the outlets when the Dominion PX unit is powered on. Setting an individu al outlet ʹ s startup state to something othe[...]
-
Page 77
Chapter 5: Using the Web Interface 67 Note: The number you enter here applies to all outlets on the Dominion PX. However, you can override this number for specific outlets, if you wish. re fer to “ Setting the Outlet Thre[...]
-
Page 78
Setting Up Outlet s and Power Threshold s 68 • First moves the outlet to the top of the list and make s it the first outlet to receive power. • Up moves the outlet up one position in the list. • Down moves the outlet[...]
-
Page 79
Chapter 5: Using the Web Interface 69 Naming the Outlets You can give each outlet a name to help you identify the device connected to it. To do this: 1. Choose Power Outlets ‐‐ > Outlet Set up . The Outlet Setup window appears. [...]
-
Page 80
Setting Up Outlet s and Power Threshold s 70 5. Click Apply . The new name is applied. Setting the Outlet Thresholds To set the current thresholds of an outlet: 1. Choose Power Outlets ‐‐ > Outlet Set up . The Outlet Setup window appears. 2[...]
-
Page 81
Chapter 5: Using the Web Interface 71 Viewing Outlet Details To display details about a particular outlet: 1. Choose Power Outlets ‐‐ > Outlet Details . The Outlet Details window appears. 2. Select an outlet from the drop ‐ down list in ?[...]
-
Page 82
Environmental Sensors 72 Note: To display the Outlet Setup window, click the [Setup] link. Refer to Naming the Outlets (on page 69) section for a picture of the Outlet Setup Window. Power Cycling an Outlet To turn an outlet[...]
-
Page 83
Chapter 5: Using the Web Interface 73 Mapping the Environmental Sensors Once the sensors have been physically connected to the Dominion PX, they must be mapped to the unit ʹ s logical sen sors before Dominion PX will recognize (and displ ay) [...]
-
Page 84
Environmental Sensors 74 4. To unmap a logical sensor from any physical sensor, clilck clear at the bottom of the column. That logical sensor will no longer be associated with any of the physical sensors. Note: It is ?[...]
-
Page 85
Chapter 5: Using the Web Interface 75 When the configuration changes have been applied, the sensor readings will be displ ayed on the Home Page next to the outlets list and the sensor names will be updated. This updated name ?[...]
-
Page 86
Setting Up Alerts 76 Setting Up Alerts The Dominion PX can be conf igur ed to issue an alert whenever a threshold is crossed, either for the Dominion PX unit as a whole or for a specific outlet. The alert can be progra[...]
-
Page 87
Chapter 5: Using the Web Interface 77 3. Select the threshold from the second drop ‐ down list in the Event field as show n below. The list of thresholds will vary depending on what was selected in the first drop ‐ down li st.[...]
-
Page 88
Setting Up Alerts 78 Creating Alert Policies Alert policies al low you to associate eve nts with destinations. Policies determine whether specific events trigger an entry in the event log , an email message to an administrat or, an SNMP ?[...]
-
Page 89
Chapter 5: Using the Web Interface 79 2. You can modify or delete a policy by clic king the corresponding button next to the policy. You can add a new policy and configure alerts and de stinations by clicking the appropriate l[...]
-
Page 90
Setting Up Alerts 80 3. Select the destinations associated with the policy in the Destin ations panel. Your choic es are System (event log), Switch Outlet , eM ail , and SNMP . 4. Click Cre ate . The policy is created. Modify a Policy To [...]
-
Page 91
Chapter 5: Using the Web Interface 81 Specifying the Al ert Destination The alert destination can be an email address or an SNMP trap. To specify the destination : 1. Choose Alerts ‐‐ > Alert Destin ations . The Alert Destinations window appear[...]
-
Page 92
Setting Up Event Logg ing 82 Email If you selected email, type the receiver ʹ s email address. SNMP If you selected SNMP, enter the IP addre ss of the trap and the community string. 4. Click Add . The destinatio n is [...]
-
Page 93
Chapter 5: Using the Web Interface 83 Configuring the Local Event Log To configure the local event log: 1. Choose Device Settings ‐‐ > Event Log . The Event Log Settings window appears. The Local Logging panel appears first. This panel cont[...]
-
Page 94
Setting Up Event Logg ing 84 5. By default, when the local event log is enabled, seven event types appear in the Event Log Assignments panel to the right. All are enabled by default. To disa ble any of these event type[...]
-
Page 95
Chapter 5: Using the Web Interface 85 Viewing the Internal Event Log To display the internal eve nt log, select Maintenance and then select View Event Log. Entries For each entry, the event log shows: • The date and time of the event ?[...]
-
Page 96
Setting Up Event Logg ing 86 Configuring NFS Logging To configure Network File System (NFS) logging: 1. Choose Device Settings ‐‐ > Event Log . The Event Log Settings window appears. The NFS Logging panel controls NFS logging. 2. Click [...]
-
Page 97
Chapter 5: Using the Web Interface 87 Configuring SMTP Logging To configure Simple Mail Transfer Protocol (SMTP) logging: 1. Choose Device Settings ‐‐ > Event Log . The Event Log Settings window appears. The SMTP Logging panel controls SMTP [...]
-
Page 98
Setting Up Event Logg ing 88 Configuring SNMP Logging Event logging can be performed by sending SNMP traps to a third ‐ party SNMP manag er. Refer to the Using SNMP appendix for instructions on enabling SNMP Event Loggin g on Dominion ?[...]
-
Page 99
Chapter 5: Using the Web Interface 89 Managing the Dominion PX You can display basic device information about the Dominio n PX, give the Dominion PX a new device name, and modify any of the network settings that were entered during th[...]
-
Page 100
Managing the Dominion PX 90 2. This Device Informa tio n pane l displays the product name, serial number, and IP and MAC addresses of the Dominion PX, as well as detailed inform ation about the firmware running in the un i[...]
-
Page 101
Chapter 5: Using the Web Interface 91 Displaying Model Confi guration Information To display informat ion about the specific model of the Dominion PX that you are using, choose Maintenance ‐‐ > Device Information . The Device Information window app[...]
-
Page 102
Managing the Dominion PX 92 Naming the Dominion PX By default, the Dominion PX has a device name of pdu. You may want to give the Dominion PX a more eas ily recognizable name to help id entify it. To do this: 1. Choose Dev[...]
-
Page 103
Chapter 5: Using the Web Interface 93 Modifying the Network Settings The Dominion PX was configured for network connectivity during the installation and configurat ion process (refer to Installation and Configuration (on page 10) ch apter for details). ?[...]
-
Page 104
Managing the Dominion PX 94 Modifying the Communicat ions, Port and Bandwidth Settings You can use Telnet or SSH to log into the Dominion PX ʹ s CLP interface. However, by default SSH is enabled and Telnet is not (because it communicates in [...]
-
Page 105
Chapter 5: Using the Web Interface 95 Note: No programs are currently ava ilable to use the Setup Protocol with Dominion PX. It is safe to leave this disabled. 6. When you ar e finished, click Apply . The settings are modified.[...]
-
Page 106
Managing the Dominion PX 96 Setting the Date and Time You can set the internal clock on the Dominion PX manuall y, or you can link to a Network Time Protocol (NTP) server and let it set the dat e and time. 1. Choose Device [...]
-
Page 107
Chapter 5: Using the Web Interface 97 Configuring the SMTP Settings The Dominion PX allows you to configure alerts to send an email message to a specific adm inistrator. To do this, you have to configure the Dominion PX ʹ s SMTP settings[...]
-
Page 108
Managing the Dominion PX 98 Configuring the SNMP Settings The SNMP Settings window allows you to enable an d disable SNMP communication between an SNMP manager and the PX unit. Enabling SNMP communicat ion will allow the PX to send SN[...]
-
Page 109
Chapter 5: Using the Web Interface 99 4. Check Enable SNMP v3 Protoc ol to enable communication with an SNMP manag er using SNMP v3 protocol. 5. Type the System Location in the System Location field. 6. Type the System Contact in ?[...]
-
Page 110
Managing the Dominion PX 100 4. When the reset is complete , the Dominion PX unit restarts and the Login window is displayed. Then, you can log back into the Dominion PX. Updating the Firmware Raritan will notify custo mers whe[...]
-
Page 111
Chapter 5: Using the Web Interface 101 4. Click Uplo ad . The Firmware Update window appears. It shows the current firmware version and the new fi rmware version, and gives you a last chance to terminate the update . 5. To proceed[...]
-
Page 112
Outlet Grouping 102 Outlet Grouping Using the Outlet Grouping feature, users can combine outlets from separate Dominion PX Units into a sin gle, logical gr oup, allowing control from a single Dominion PX. Outlets that are grouped ?[...]
-
Page 113
Chapter 5: Using the Web Interface 103 5. Click Add/Modify . The new Dominion PX is now av ailable for outlet grouping. To modify the name, or the Username and Password used to access a participating Dominion PX, simply retype the[...]
-
Page 114
Outlet Grouping 104 2. Type a name for the outlet group in the Name field. It is a good ide a to give the outlet group a recognizable name that helps identify the device(s) connected to it. 3. Type a comment fo[...]
-
Page 115
Chapter 5: Using the Web Interface 105 Controlling Outlet Groups Any outlet groups created from this Dominion PX will appear in the Outlet Groups List. From this list, you can power ON, Power OFF or cycle power to the outlet group[...]
-
Page 116
Outlet Grouping 106 Note: The page must finish loading or refreshing before selecting an action. If you select an act ion before the page has finished updating the status of all outlet groups, the command will be ignor[...]
-
Page 117
107 Direct Access Interfaces Access thru CC Interfaces Product Association Control Association Control Connectivity Max # of PX units supported Dominion SX >= 3.1 SX GUI <3.1 None RSC into PX serial port CC GUI CC GUI CSCSPCS ‐ 1 or CSCSPCS[...]
-
Page 118
Dominion KX 108 NOTE: Connecting any power CIM except the for the D2CIM ‐ PWR (e.g . P2CIM ‐ PWR) to the serial port of the Dominion PX will switch all the outlets to the ON state, even if they were previously [...]
-
Page 119
Chapter 6: Integratio n 109 2. Select up to eight Dominion PX units from drop ‐ down list . 3. Select up to a total of four outlets from the PX units. [...]
-
Page 120
Dominion KX 110 4. Notice the target icon change to in dicate power. 5. Notice the outlet icon change to indic ate association. 6. Notice the outlet name automatically changes to the tar get ʹ s name. Control a Target's Power 1. Sel[...]
-
Page 121
Chapter 6: Integratio n 111 2. Select from Power On, Power Off, or Cyc le Power optio ns. Dominion KX-II To use the Dominion KX II power control feature: 1. Connect the Dominion PX to your target server. 2. Name the Dominion P[...]
-
Page 122
Paragon II 112 Paragon Manager Application Use Raritan ʹ s Paragon Manager applicatio n to configure associations: 1. In Paragon Manager, select the target. 2. Click the target icon and drag ‐ and ‐ drop it on the desired outlets. 3. The out[...]
-
Page 123
Chapter 6: Integratio n 113 Associate Outlets with a Target On the OSD screen, press F5 to enter the Channel Configuration page and select the channel. Press G to enter the special second ‐ tier screen (Outlet Configuration page). Contr[...]
-
Page 124
Dominion SX 114 Control an Outlet's Power When in “Channel Select ion” Menus (NOT in “Channel Select ion by Name”), users can navigate to individual Dominion PX ports and control power. User Selects Outlet and Presses X, O, ?[...]
-
Page 125
Chapter 6: Integratio n 115 3. Type a name and description in the Name and Description fields. 4. Select the number of outlets from the drop ‐ down menu in the Number of Outlets fi eld. 5. Type the port number in the Por[...]
-
Page 126
Dominion KSX 116 4. A confirmation message will appear to indicate the successful operation. Figure 1: Outlet Confirmation Screen Check Power Strip Status 1. Choose Power Control ‐‐ > Pow er Strip Status . 2. A status box appears to[...]
-
Page 127
Chapter 6: Integratio n 117 CommandCenter You can manage a Dominion PX from a CommandCenter if it is connected through any of the following Raritan products: • Dominion SX • Dominion KX • Paragon II • Refer to CC ‐ SG user ?[...]
-
Page 128
118 Model Rack V Curren t Outlet Type # of Outlet s Plug Type # of Circui t # of Circuit Breaker DPCR8 ‐ 15 1U 120 15 Nema 5 ‐ 15R 8 Nema 5 ‐ 15P 1 None DPCR8A ‐ 16 1U 230 16 IEC320 C13 8 IEC6 0309 16A 1 None DPCR8A ‐ 20L6 1U 208 20 IEC[...]
-
Page 129
Appendix A: Dominion PX Models 119 Note: Per NEC rules, North Americ an units should be de ‐ rated by 20% . For example, a Dominion PX rated at 30A can provide 24A of current in North America. Regardless of Dominion PX ?[...]
-
Page 130
Environmental Specification s 120 Environmental Specifications Environmental Factor Threshold Max Ambient Temperature 40 degrees Celsius [...]
-
Page 131
121 Dominion PX Series Unit Model ____________ Dominion PX Series Unit Serial Number ____________ Appendix B Equipment Setup Worksheet[...]
-
Page 132
Environmental Specification s 122 OUTLET 1 OUTLET 2 OUTLET3 MODEL MODEL MODEL SERIAL NUMBER SERIAL NUMBER SERIAL NUMBER USE USE USE OUTLET 4 OUTLET 5 OUTLET 6 MODEL MODEL MODEL SERIAL NUMBER SERIAL NUMBER SERIA[...]
-
Page 133
Appendix B: Equipment Setup Workshee t 123 MODEL MODEL MODEL SERIAL NUMBER SERIAL NUMBER SERIAL NUMBER USE USE USE OUTLET 13 OUTLET 14 OUTLET 15 MODEL MODEL MODEL SERIAL NUMBER SERIAL NUMBER SERIAL NUMBER USE USE ?[...]
-
Page 134
Environmental Specification s 124 SERIAL NUMBER SERIAL NUMBER USE USE Types of adapters _____________ ____________ _______________ _______________ ______ Types of cables _____________ ____________ _______________ _______________ _________ Name of software ?[...]
-
Page 135
125 This section explains how to use the Command Line Protocol (CLP) interface to administer a Dominion PX. In This Chapter About the CLP Interface ............................................................................... 125 Logging int o the CLP [...]
-
Page 136
Logging into the CLP interface 126 Logging into the CLP interface Logging in via HyperTerminal and a serial connection is a little different than logging in using SSH or Telnet. Using HyperTerminal To log in usin g HyperTerminal: 1. Connect your [...]
-
Page 137
Appendix C: Using the CLP Interface 127 6. You are now logged into the CLP interface and can begin using the interface to administer the Dominion PX. Using SSH or Telnet To log in usin g SSH or Telnet: 1. Launch an SSH or T[...]
-
Page 138
Showing Outlet Informat ion 128 Syntax The following is the syntax for the show command: clp:/-> show /system1/outlet<outlet number> where <outlet number> is the number of the outlet. To display information for all outlets, [...]
-
Page 139
Appendix C: Using the CLP Interface 129 Examples The following are examples of the show command. Example 1 -- No Attributes The following shows the output of the show command with no attributes entered. Example 2 -- Name Attribute The following shows [...]
-
Page 140
Turning an Out let On or Off 130 Turning an Outlet On or Off The set command turns an outlet on or off. Syntax The following is the syntax for the set command: clp:/-> set /system1/<outlet number> powerState=on|off where the keyword on t[...]
-
Page 141
131 This Appendix will help you set up Dominion PX for use with an SNMP manager. The Dominion PX can be configured to send traps to an SNMP manager, as well as receive GET an d SET commands in order [...]
-
Page 142
Enabling SNMP 132 Enabling SNMP To communicate with an SNMP manager, you must first enable the SNMP agent on Dominion PX. This can be done from the SNMP Settings window: 1. Select Device Settings , and then se lect SNMP Se[...]
-
Page 143
Appendix D: Using SNMP 133 • Additionally, check Force Encryption to force using encrypted SNMP communicat ion. 1. Type the SNMP MIBII sysLocation value in the System Location field. 2. Type the SNMP MIBII sysContact value in the Sy[...]
-
Page 144
Enabling SNMP 134 Configuring Users for Encrypted SNMP v3 The SNMP v3 protocol allows for encrypted communication. To take advantage of this, users will need to have a Encryption Phr ase,which acts as a shared secret between them and [...]
-
Page 145
Appendix D: Using SNMP 135 4. If you want to specify a different encryption phrase, uncheck this box, type the new phrase in the SNMP v3 Encrypt ion Phrase field, then type it again in the Confirm SNMP v3 Encryption Ph[...]
-
Page 146
SNMP Gets and S e ts 136 6. When SNMP logging is en abled, seven event types appear in the Event Log Assignments panel to the right. All are disabled by default. To enable any of these event types, check the appropriate ?[...]
-
Page 147
Appendix D: Using SNMP 137 The Dominion PX MIB This MIB is available from the SNMP Sett ings pag e, the Event Logging page, or by poin ting your browser to http://<ip- address>/MIB.txt , where <ip-address> is the IP address of you[...]
-
Page 148
SNMP Gets and S e ts 138 For example, the unitSensorsGrou p group contains objects for sensor readings of the Dominion PX as a whole. One object listed under this group, unitCurrent , is described later in the MIB as ʺ The [...]
-
Page 149
139 The IPMI tool set is command ‐ line that allows users to display channel information, print sensor data, and set LAN configuration paramete rs. The following explains the av ailable IPMI commands. Note: The open source ?[...]
-
Page 150
Channel Commands 140 Example $ ipmitool -I lan -H 192.168.51.58 -U admin -a channel authcap 14 5 Refer to the IPMI Privileges Le vels section for additional information about IPMI privilege s. info [channel number] Displays information about the selected channel. ?[...]
-
Page 151
Appendix E: Using the IPMI Tool Set 141 getciphers <all | supported> <ipmi | sol> [c hannel] Displays the list of cipher suites supported for the given application (ipmi or sol) on the given channel. Example $ ipmitool -I lan -H allen-dpxpcr20-20 -U admin -P raritan[...]
-
Page 152
LAN Commands 142 file <filename> Event log records specif ied in filename will be added to the System Event Log. The format of each line in the file is as fo llows: <{EvM Revision} {Sensor Type} {Sensor Num} {Even t ?[...]
-
Page 153
Appendix E: Using the IPMI Tool Set 143 set <channel> <parameter> Sets the given parameter on the given channel. Valid parameters are: • ipaddr <x.x.x .x> Sets the IP address for this channel. • netmask <x.x.x.x> Sets ?[...]
-
Page 154
Sensor Commands 144 The format of privlist is as follows. Each char acter represents a priv ilege level and the characte r position identifies the cipher suite number. For example, the first char acter represents cipher suite 1 ?[...]
-
Page 155
Appendix E: Using the IPMI Tool Set 145 thresh <id> <threshold> <setting> This allows you to set a particu lar sensor threshold valu e. The sensor is specified by name. Valid thres holds are: • unr Upper Non ‐ Recover able • ucr [...]
-
Page 156
OEM Commands 146 Command Name Id Set Receptacle ACL 0x19 Get Receptacle ACL 0x1A Set Sensor Calibr ation 0x1B Test Actors 0x1C Test Sensors 0x1D Set Power Cycle Delay Command 0x1E Get Power Cycl e Delay Command 0x1F Set Power [...]
-
Page 157
Appendix E: Using the IPMI Tool Set 147 Request Dat a 1 # of receptacle [7 ‐ 5] reserved [4 ‐ 0] # of receptacl e, 0 based, highest valid # depends on device model 2 new state [7 ‐ 1] reserved [0] 1b = pow e[...]
-
Page 158
OEM Commands 148 Request Dat a 1 # of group [7 ‐ 5] reserved [4 ‐ 0] group #, valid numb ers: 0 ‐ 23 2 new state [7 ‐ 1] reserved [0] 1b = pow er on, 0b = power off Response Data 1 Completion[...]
-
Page 159
Appendix E: Using the IPMI Tool Set 149 Request Dat a 1 # of group [7 ‐ 5] reserved [4 ‐ 0] group #, valid numb ers: 0 ‐ 23 2 [7 ‐ 1] reserved [0] 1b = group is enabled, 0b = group is disabled 3 [7] [...]
-
Page 160
OEM Commands 150 Request Dat a 1 # of group [7 ‐ 5] reserved [4 ‐ 0] group #, valid numb ers: 0 ‐ 23 Response Data 1 Completion Code 2 delay in 1/10 seconds Set Receptacle ACL ACLs define who is authorized [...]
-
Page 161
Appendix E: Using the IPMI Tool Set 151 Set Sensor Calibration Sensor calibration is only allowed for thresh old based sensors tha t return a sensor reading byte with the Get Sensor Reading Command. Also not all threshold based sensors have ?[...]
-
Page 162
IPMI Privilege Levels 152 Request Dat a 1 # of receptacle (0xFF for global unit delay) 2 Delay (seconds), 1 ‐ 25 5 for unit and receptacle, 0 fallba ck to unit delay (receptacle only) Response Data 1 Completion Code Get [...]
-
Page 163
153 Event Type Examples Outlet Control Outlet(#) sw itched on by user Outlet(#) switched off by user Outlet(#) cycled by user Outlet/Unit/Environmen tal Sensors Assertion: Environmental Temperature (#) above upper non ‐ critical threshold Deass[...]
-
Page 164
IPMI Privilege Levels 154 [...]
-
Page 165
155 This appendix contains information describi ng: • DPX Serial RJ ‐ 45 pinout s RJ-45 Pin/signal definition Pin No. Signal Direction Descrip tion 1 DTR Output Reserved 2 GND ― Signal Ground 3 +5V ― Power for CIM (200mA, fu[...]
-
Page 166
[...]
-
Page 167
157 < <predefined event number> • 141 1 1U Products • 4 1U Size • 2 2 2U Products • 5 2U Size • 3 A About the CLP Interface • 125 Add a Dominion PX Unit in Paragon II • 112 All ?[...]
-
Page 168
Index 158 Enabling SNMP • 132 Environmental Sensors • 72 Environmental Specificatio ns • 120 Equipment Setup Worksheet • 11, 121 Event Commands • 141 Event Types • 153 Examples • 129 F file <filen ame> • [...]
-
Page 169
Index 159 Q Querying an Outlet Sensor • 130 R Rack Mount Safety Guidelines • 6 Rack ‐ Mounting the Dominion PX • 6 Refresh • 35 Reset to Defaults • 35 Resetting the Dominion PX • 99 Resetting to Fa ct[...]
-
Page 170
[...]
-
Page 171
¾ U.S./Canada/Latin America Monday ‐ Friday 8 a.m. ‐ 8 p.m. ET Phone: 800 ‐ 724 ‐ 8090 or 732 ‐ 764 ‐ 8886 For CommandCenter NOC: Press 6, then Press 1 For CommandCenter Secure Gateway: Press 6, then Press 2[...]