Go to page of
Similar user manuals
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of Suzuki Swift Dzire, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Suzuki Swift Dzire one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of Suzuki Swift Dzire. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of Suzuki Swift Dzire should contain:
- informations concerning technical data of Suzuki Swift Dzire
- name of the manufacturer and a year of construction of the Suzuki Swift Dzire item
- rules of operation, control and maintenance of the Suzuki Swift Dzire item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Suzuki Swift Dzire alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Suzuki Swift Dzire, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Suzuki service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Suzuki Swift Dzire.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the Suzuki Swift Dzire item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
1 T ABLE OF CONTENTS BEFORE DRIVING STEERING COLUMN CONTROLS INSTRUMENT P ANEL O THER CONTROLS AND EQ UIPMENT OPERA TING Y OUR VEHICLE DRIVING TIPS VEHICLE LO ADING AND T O WING INSPECTION AND MAINTENANCE EMERGENCY SER VICE BOD Y WORK CARE GENERAL INFORMA TION SPECIFICA TIONS TUBELESS TYRE NETW ORK SER VICE NETW ORK 1 2 3 4 5 6 7 8 9 10 11 12 13 14[...]
-
Page 2
2[...]
-
Page 3
3 FOREWORD This manual is an essential part of your vehicle and should remain with the v ehicle when resold or otherwise transferred to a new owner or oper ator . Please read this manual carefully bef ore operating y our new MAR UTI SUZUKI and revie w the manual from time to time. It contains impor tant information on safety , operation and mainten[...]
-
Page 4
4 IMPORT ANT W ARNING / CA UTION / NOTE Please read this manual and follo w its instr uctions carefully . T o emphasize special information, the symbol and the words W ARNING , CA UTION and NO TE hav e special meanings. These special meanings apply except when la ws or regulations require that the signal words be used with a different meaning. Pa y[...]
-
Page 5
5 MAINTENANCE SER VICE RECORD MODEL CHASSIS NO . ENGINE NO. KEY NO . D A TE OF DELIVER Y MILEAGE (KM) O WNER’S NAME & ADDRESS ____________________________________________________________________________ ____________________________________________________________________________________________________ ________________________________________[...]
-
Page 6
6 JOB CARD NO. F: ....FREE SER VICE, P: ....P AID SER VICE, W: ....W ARRANTY JOB, A: ....ACCIDENT AL JOB KIND OF SER VICE DA TE OF SERVICE MILEAGE (KM) DESCRIPTION OF JOB NAME OF SERVICING DEALER / MASS MECHANICS SIGNA TURE[...]
-
Page 7
7 W ARRANTY POLICY Maruti Suzuki India Limited (hereinafter called “Maruti Suzuki”), warr ants that each new Maruti Suzuki vehicle distributed in India by Maruti Suzuki and sold by an authorised Maruti Suzuki dealer will be free, under normal use and ser vice, from any def ects in material and workmanship at the time of manuf acture SUBJECT T O[...]
-
Page 8
8 authorised dealer/ser vice station. 11. any v ehicle which has been used for purposes other than what it was designed f or . 12. any damage or deterioration caused by industrial pollution and bird droppings. 13. insignificant defects which do not aff ect the function of the v ehicle including without limitation, sound, vibration and fluid seep . [...]
-
Page 9
9 EMISSION W ARRANTY POLICY Maruti Suzuki offers the Emission W arranty on all Mar uti Suzuki vehicles (apart from the Regular W arranty and will run parallel to the regular product warr anty) only in four metropolitan cities (Ne w Delhi, K olkata, Mumbai and Chennai) with effect from J uly 1st, 2001. T erms: The Emission W arranty will be applicab[...]
-
Page 10
10 11 . The customer needs to produce the PUC (P ollution Under Control) cer tificate valid f or the period preceeding the test during which the failure is disco vered. The receipts (f or the maintenance of the vehicle as per specification in Owner’ s Manual and Ser vice Booklet from the date of original purchase of the v ehicle) will also be req[...]
-
Page 11
11[...]
-
Page 12
12[...]
-
Page 13
13 BEFORE DRIVING Fuel Recommendatio n ......................................................... 1-1 Keys ........................................................................................ 1- 1 Immobilizer Key (if equipped) ............................................ 1- 2 Immobilizer System (Petr ol Engine) (if equipped) .......... 1-2 Immob[...]
-
Page 14
14 Fuel Recommendation Petr ol Engine Y ou must use unleaded petrol with an octane number (RON) of 88 or higher . Diesel Engine The diesel fuel should be with Cetane Number (CN) higher than 48 and sulphur contest less than 500 ppm (par ts per million). Do not use marine diesel fuel, heating oils and so forth. CA UTION The fuel tank has an air space[...]
-
Page 15
15 NO TE: • If y ou lose your immobilizer ignition ke y , contact your MAR UTI SUZUKI dealer as soon as possible to ha ve the lost one deactivated, then ha ve the ne w ke y made by them. • If you o wn other vehicles with immobiliz er ke ys, k eep those ke y a wa y from the ignition switch when using y our v ehicle, or the engine may not be star[...]
-
Page 16
16 Ignition Ke y Reminder (if equipped) A buzz er sounds inter mittently to remind you to remo ve the ignition k ey if it is in the ignition switch when the driv er’ s door is opened. Immobilizer System (Diesel Engine) This system is designed to help prev ent vehicle theft b y electronically disabling the engine star ting system. The engine can b[...]
-
Page 17
17 Door Locks Side Door Locks 60B008 T o lock a front door from outside the vehicle: • Inser t the ke y and tur n the top of the ke y anticlockwise, or • T urn the lock knob f orward and hold the door handle up as you close the door . T o unlock a front door from outside the vehicle , inser t the key and turn the top of the ke y clockwise. T o [...]
-
Page 18
18 63J004 Y ou can also loc k or unlock all (4 or 5) doors by depressing the front or rear of the switch (1), respectiv ely . Ke yless Entry System (if equipped) Please refer to the booklet on Maruti Suzuki Security System, provided along with this Owner’ s Manual f or operation and warr anty pur pose. Child-Proof Loc ks (rear side door) 63J005 A[...]
-
Page 19
19 T ailgate T ailgate unlatch switch (if equipped) 75J002 Y ou can lock and unloc k the tailgate by using the ke y in the dr iver’ s door lock. T o open the tailgate, push and hold the tailgate unlatch s witch (1) and lift the tailgate. If you can not unlatch the tailgate by pushing the unlatch switch (1) due to a discharged batter y or malfunct[...]
-
Page 20
20 Y ou can also unlatch the tailgate-trunklid by pulling the release le v er (if equipped) located on the outboard side of the driver’ s seat. Alwa ys make sure that the tailgate is closed and latched securel y . Completely c losing it helps keep exhaust gases fr om entering the car . Completel y closing the tailgate also helps prevent occupants[...]
-
Page 21
21 P assenger’ s door 63J008 Each passenger’ s door has a switch (5) to operate that passenger’ s window only . 81A009 T o open a window , push the top par t of the s witch and to close the window , lift up the top par t of the switch. The driver’ s window has an “auto-down” feature f or added conv enience (at toll booths or drive-throu[...]
-
Page 22
22 Mirr ors Inside Rearview Mirr or Example -1 65D410 Y ou can adjust the inside rear view mirror by hand so as to see the rear of y our v ehicle in the mirror . T o adjust the mirror mov e the mirror up , down or side wa ys by hand to obtain the best view . Example -2 65D409 Y ou can adjust the inside rear view mirror by hand so as to see the rear[...]
-
Page 23
23 Outside Rearview Mirr ors Adjust the outside rear view mirrors so y ou can just see the side of your v ehicle in the mirrors. Example - 1 75J003 Y ou can adjust the outside rear view mirrors by hand with the knob (1) located on the driver’ s or front passenger’ s door panel (If equipped). 75J003-1 Y ou can adjust the outside rear view mirror[...]
-
Page 24
24 63J012 The adjustment lev er f or each front seat is located under the front of the seat. T o adjust the seat position, pull up on the adjustment lev er and slide the seat forw ard or rearward. After adjustment, try to move the seat forw ard and rearward to ensure that it is securely latched. 63J013 If the driver’ s seat is equipped with a sea[...]
-
Page 25
25 Adjustable Head Restraints (if equipped) Head restraints are designed to help reduce the risk of neck injuries in the case of an accident. NO TE: It may be necessary to recline the seatback to provide enough ov erhead clearance t o remov e the head restraint. 75F123 Adjust the head restraint to the position which places the centre of the head re[...]
-
Page 26
26 Rear (if equipped) T ype 1 & T ype 2 63J135 BEFORE DRIVING 1-13 63J015 T o raise the front head restraint, pull upward on the restraint until it clic ks. T o lower the restraint, push do wn on the restraint while holding in the lock le v er . If a head restraint must be remov ed (f or cleaning, replacement, etc.), push in the lock le ver and[...]
-
Page 27
27 65D201 (Continued) • Seat belts should never be w orn with the straps twisted and should be adjusted as tightly as is comf or table to pr ovide the pr otection for which the y have been designed. A slack belt will pr ovide less protection than one whic h is snug. • Make sure that each seat belt bu ckle is inserted into the proper bu ckle cat[...]
-
Page 28
28 (Continued) • Av oid contamination of seat belt webbing by polishes, oils, chemicals, and par ticularly battery acid. Cleaning may safel y be carried out using mild soap and water . • For children, if the shoulder belt irritates the neck or face, mo ve the child closer to the centre of the vehicl e . • All seatbacks should al ways be in an[...]
-
Page 29
29 on your hips as possib le and adjust it to a snug fit b y pulling the shoulder por tion of the belt upward through the latch plate. The length of the diagonal shoulder strap adjusts itself to allow freedom of mov ement. BEFORE DRIVING 1-16 Safety reminder 60A038 60A040 T o reduce the risk of sliding under the belt during a collision, position th[...]
-
Page 30
30 Rear Centre Seat Belt Lap belt 60B038 Sit up straight and well bac k in the seat. T o f asten the belt, pull the latch plate attached to the seat belt across your hips and press it into the bu ckle until you hear a “clic k”. T o reduce the risk of sliding under the belt during a collision, position the belt across your lap as lo w on y our h[...]
-
Page 31
31 Shoulder Anchor Height Adjuster (if equipped) 63J017 Adjust the shoulder anchor height so that the shoulder belt rides on the centre of the outboard shoulder . T o adjust the shoulder anchor height, slide the anchor up or down while pushing the loc k button. After adjustment, make sure that the anchor is securely lock ed. Be sure that the should[...]
-
Page 32
32 Be sure to inspect all seat belt assemblies after an y collision. An y seat belt assembly whic h was in use during a collision (other than a very minor one) should be replaced, even if damage to the assembly is not obvious. An y seat belt assembly which was not in use during a collision should be replaced if it does not function properl y , it i[...]
-
Page 33
33 MAR UTI SUZUKI highly recommends that you use a child restr aint system to restrain infants and small children. Many different types of child restraint systems are av ailab le; make sure that the restraint system you select meets applicab le safety standards. All child restraint systems are designed to be secured in vehicle seats b y either seat[...]
-
Page 34
34 65D362 65D363 BEFORE DRIVING 1-21 65D361 If your vehic le is equipped with a fr ont passenger front air bag, do not install a rear-facing child restraint in the fr ont passenger’ s seat. If the passenger’ s air bag inflates, a child in a rear -facing child restraint could be killed or seriously injured. The back of a rear - facing child rest[...]
-
Page 35
35 Seat Belt Pretensioner System (if equipped) 65D205 T o deter mine if your v ehicle is equipped with a seat belt pretensioner system at the front seating positions, chec k the label on the front seat belt at the bottom par t. If the letters “p” and/or “PRE” appear as illustrated, y our vehicle is equipped with the seat belt pretensioner s[...]
-
Page 36
36 Service on or around the pretensioner system components or wiring must be performed only b y an author ized MAR UTI SUZUKI dealer who is specially trained. Improper service could result in unintended activation of pretensioners or could render the pretensioner inoperativ e. Either of these two conditions ma y result in personal injury . T o prev[...]
-
Page 37
37 Supplemental Restraint System (air bags) (if equipped) Y our vehicle is equipped with a Supplemental Restraint System consisting of the follo wing components in addition to a lapshoulder belt at each front seating position. 1 . Dr iver’ s front air bag module 2 . F ront passenger’ s front air bag module 3 . Seat belt pretensioners 4 . Air ba[...]
-
Page 38
38 63J030 If the AIR BAG light on the instrument cluster does not blink when the ignition s witch is first tur ned to the “ON” position, or the AIR BAG light sta ys on, or comes on while dr iving, the air bag system (or the seat belt pretensioner system (if equipped)) may not w or k properly . Hav e the air bag system inspected by an author ize[...]
-
Page 39
39 Front air bags will pr obably not inflate 65D237 F ront air bags are designed to inflate only in sev ere frontal collisions. They are not designed to inflate in rear impacts, side impacts, rollov ers or minor frontal collisions, since the y would offer no protection in those types of accidents. Remember , since an air bag deploys only one time d[...]
-
Page 40
40 How the system w orks In a frontal collision, the crash sensors will detect rapid deceleration and send a signal to the controller . If the controller judges that the deceleration represents a se vere frontal cr ash, the controller will trigger the inflators. The inflators inflate the appropriate air bags with nitrogen or argon gas. The inflated[...]
-
Page 41
41 • The driver should not lean over the steering wheel. The fr ont passenger should not rest his or her body against the dashboar d, or otherwise get too close to the dashboard. In these situations, the outof-position occupant would be too c lose to an inflating air bag, and may suffer se vere injury . • Do not attach an y objects to, or place[...]
-
Page 42
42[...]
-
Page 43
43 STEERING COLUMN CONTROLS Ignition Switch ....................................................................... 2-1 Lighting/T urn Signal Control Lever ................................... 2 -3 Windscreen Wiper and W asher Lev er ............................... 2 -4 Rear Windo w Wiper/W asher Switch (if equipped) ........... 2-5 Horn .... ......[...]
-
Page 44
44 65D367 T o a v oid possible injur y , do not operate controls b y reaching through the steering wheel. Ignition Switch 60B041 The ignition switch has the f ollowing f our positions: LOCK This is the nor mal par king position. It is the only position in which the ke y can be remov ed. 60G033 Y ou must push in the ke y to tur n it to the “LOCK?[...]
-
Page 45
45 AC C Accessories such as the radio can operate, b ut the engine is off . ON This is the nor mal operating position. All electr ical systems are on. ST ART This is the position for starting the engine using the star ter motor . The ke y should be released from this position as soon as the engine star ts. Ignition key reminder (if equipped) A buzz[...]
-
Page 46
46 Lighting/T urn Signal Contr ol Lever Lighting Operation 75J004 T o tur n the lights on or off, twist the knob on the end of the lev er . There are three positions: in the “OFF” position all lights are off; in the middle position the front parking lights, taillights, licence plate light, and instrument lights are on, but the headlights are of[...]
-
Page 47
47 T urn Signal Operation With the ignition s witch in the “ON” position, mov e the lev er up or down to activ ate the r ight or left tur n signals. Normal turn signal 75J007 Mov e the le ver all the w ay upw ard or downw ard to signal. When the tur n is completed, the signal will cancel and the lev er will retur n to its nor mal position. Lane[...]
-
Page 48
48 Windscreen W asher 75J010 T o spra y windscreen washer fluid, pull the lev er tow ard you. The windscreen wipers will automatically tur n on at low speed if they are not already on and the “INT” position is equipped. • T o pre vent windscreen icing in cold weather , turn on the defr oster to heat the windscreen bef ore and during windscree[...]
-
Page 49
49 CA UTION Clear ice or snow fr om the rear window and rear wiper b lade before using the rear wiper . Accumulated ice or snow could pre vent the wiper blade fr om moving, causing damage to the wiper motor . STEERING COLUMN CONTR OLS 2-6 Tilt Steering Lock Le ver (if equipped) 63J026 The loc k lev er is located under the steering column. T o adjus[...]
-
Page 50
Horn 75J021 Press the horn button of the steering wheel to sound the hor n. The hor n will sound with the ignition switch in an y position. Remote Audio Contr ols (if equipped) 79J073 Y ou can control basic functions of the audio system with the switches on the steering wheel. STEERING COLUMN CONTR OLS 2-7[...]
-
Page 51
51 INSTRUMENT P ANEL Instrument Panel ................................................................... 3-1 Instrument Cluster (Diesel) ................................................. 3-2 Instrument Cluster (P etr ol) .................................................. 3-4 W arning and Indicator Lights ...........................................[...]
-
Page 52
51 INSTRUMENT P ANEL Instrument Panel ................................................................... 3-1 Instrument Cluster (Diesel) ................................................. 3-2 Instrument Cluster (P etr ol) .................................................. 3-4 W arning and Indicator Lights ...........................................[...]
-
Page 53
52 Instrument Panel 1. Instr ument cluster 2. Ignition switch 3. Lighting switch/T ur n signal and dimmer s witch 4. Windscreen wiper and washer s witch/Rear window wiper and washer s witch (if equipped) 5. Hazard warning switch 6. Other switches (if equipped) 7. Air conditioning control panel 8. Audio (if equipped) 9. Storage area 10. Bonnet relea[...]
-
Page 54
53 Instrument Cluster (Diesel) With T achometer 1. Speedometer 2. Odometer/T rip meter 3. Odometer/T rip meter selector knob 4. T achometer (if equipped) 5. Fuel gauge 6. T emperature gauge 7. W ar ning and indicator lights 75J013B INSTR UMENT P ANEL 3-2[...]
-
Page 55
54 Instrument Cluster (Diesel) Without T achometer 75J014 INSTRUMENT P ANEL 3-3[...]
-
Page 56
55 Instrument Cluster (Petrol) with tachometer 1. Speedometer 2. Odometer/T rip meter 3. Odometer/T rip meter selector knob 4. T achometer (if equipped) 5. Fuel gauge 6. T emperature gauge 7. W ar ning and indicator lights 75J013 INSTR UMENT P ANEL 3-4[...]
-
Page 57
56 Instrument Cluster (Petrol) without tac hometer 75J014 INSTRUMENT P ANEL 3-5[...]
-
Page 58
57 W arning and Indicator Lights Brake System W arning Light 65D477 For w orking check of this light, there are follo wing three different type oper ations depending on the v ehicle’ s specification. 1) The light comes on br iefly when the ignition s witch is tur ned to the “ON” and/or “ST AR T” position. 2) The light comes on when the pa[...]
-
Page 59
58 Anti-Lock Brake System (ABS) W arning Light (if equipped) 65D529 When the ignition switch is turned to the “ON” position, the light comes on br iefly so you can chec k that the light is working. If the light stays on, or comes on when dr iving, there may be something wrong with the ABS. If this happens: 1) Pull off the road and stop carefull[...]
-
Page 60
59 AIR B A G Light (if equipped) 63J030 This light blinks or comes on f or se veral seconds when the ignition switch is turned to the “ON” position so y ou can check if the light is working. The light will come on and stay on if there is a problem in the air bag system or the seat belt pretensioner system (if equipped). W ARNING If the AIR B AG[...]
-
Page 61
60 Open Door W arning Light (if equipped) 54G391 This light remains on until all doors (including the tailgate) are completely closed. Electric P o wer Steering Light (if equipped) 75F002 This light comes on when the ignition s witch is tur ned to the “ON” position, and goes out when the engine is star ted. If this light comes on while driving,[...]
-
Page 62
61 T urn Signal Indicators 50G055 When you turn on the left or r ight tur n signals, the corresponding green arro w on the instrument panel will flash along with the respective turn signal lights. When y ou tur n on the hazard warning switch, both arrows will flash along with all of the turn signal lights. Main Beam (high beam) Indicator Light 50G0[...]
-
Page 63
62 Speedometer/Odometer/T rip meter 75J015 (1) Speedometer (2) Odometer/T r ip meter (3) Indication selector knob Speedometer The speedometer indicates vehicle speed in km/h. Odometer/T rip meter When the ignition switch is turned to “ON”, the display sho ws the odometer or trip meter . The odometer records the total distance the vehicle has be[...]
-
Page 64
63 T achometer (if equipped) 63J034 The tachometer indicates engine speed in rev olutions per minute. CA UTION Never drive with the engine speed indicator in the red zone or severe engine damage can result. When downshifting to a lower gear , make sure not to operate with excessive rev olution speeds of the engine. Refer to “Downshifting maximum [...]
-
Page 65
64 T emperature Gauge 63J036 When the ignition switch is in the “ON” position, this gauge indicates the engine coolant temperature. Under nor mal dr iving conditions, the indicator should sta y within the nor mal, acceptable temper ature range between “H” and “C”. If the indicator approaches “H”, o verheating is indicated. Follo w t[...]
-
Page 66
65 Headlight Leveling Switch (if equipped) 75J016 Lev el the headlight beam according to the load condition of your v ehicle by turning this switch. The char t below shows the appropriate switch position f or different v ehicle-load conditions. Fr ont Fog Light Switch (if equipped) 63J039 The front f og light comes on when the fog light s witch is [...]
-
Page 67
66 Glove Bo x 63J042 T o open the glov e box, pull the latch le v er . T o close it, push the lid until it latches securely . W ARNING Never drive with the glo ve box lid open. It could cause injury if an accident occurs. INSTRUMENT P ANEL 3-15 Information Displa y (if equipped) Cloc k (1) (if equipped) The clock is sho wn when the ignition switch [...]
-
Page 68
67 Heating and Air Conditioning System There are two types of heating and air conditioning systems as follo ws: • Manual Heating and Air Conditioning System • Automatic Heating and Air Conditioning System (Climate Control) Air Outlet 75J022 1. Windscreen demister outlet 2. Side demister outlet 3. Side outlet 4. Centre outlet 5. Floor outlet INS[...]
-
Page 69
68 Side outlet Manual Heating and Air Conditioning System Description of Controls 63J046 T emperature selector (1) This is used to select the temperature b y turning the selector . Blower speed selector (2) This is used to tur n on the blo wer and to select blo wer speed by turning the selector . Air flow selector (3) 63J048 This is used to select [...]
-
Page 70
69 Bi-level (b) 63J137 T emperature-controlled air comes out of the floor outlets and cooler air comes out of the centre and side outlets. When the temperature selector (1) is in the fully COLD position or fully HO T position, how ev er , the air from the floor outlets and the air from the centre and side outlets will be the same temperature. Heat [...]
-
Page 71
70 System Operating Instructions Natural ventilation Select “VENTILA TION” and “FRESH AIR”, the temperature selector to the desired temperature position, and the blo wer speed selector to “OFF”. Fresh air will flo w through the vehicle during dr iving. Forced ventilation The control settings are the same as for natural v entilation exce[...]
-
Page 72
71 63J049 NO TE: If you need maximum demisting: • set the air flo w selector to “DEMIST”, • set the blo wer speed selector to HIGH, • adjust the temperature selector to the HO T end, and • adjust the side outlets so the air b lows on the side windows . A utomatic Heating and Air Conditioning System (Climate Control) (if equipped) Descri[...]
-
Page 73
72 T emperature selector (1) This is used to select the temperature by tur ning the selector . Y ou can set the temperature between 18°C and 32°C . The selected temperature is sho wn in the display . Blower speed selector (2) This is used to tur n on the blo wer and to select blo wer speed by turning the selector . The selected b lower speed is s[...]
-
Page 74
73 Demister switc h (6) This is used to clear the windscreen and side windows b y pushing the s witch. When the demister switch is on, the indicator light abov e the demister switch will come on and the demister display is sho wn in the display . 63J140 When tur ning the demister switch (6) on, temperature-controlled air comes out of the windscreen[...]
-
Page 75
74 System Operating Instructions A utomatic Operation Y ou can let the climate control system work automatically . T o set the system in fully automatic operation, f ollow the procedure below . 1) Push the “A UTO” s witch (7) and the “FULL A UT O A/C” indicator are shown in the display . 2) Set the desired temperature by turning the tempera[...]
-
Page 76
75 maximum cooling or heating and the blo wer will run at full speed. • T o av oid blo wing cold air in cold weather or hot air in hot weather , the system will delay turning on the blo wer until warmed or chilled air is av ailable . • If your v ehicle has been left in the sun with the windows closed, it will cool faster if y ou open the window[...]
-
Page 77
76 Maintenance If you do not use the air conditioner f or a long period, such as dur ing winter , it may not give the best perf ormance when you star t using it again. T o help maintain optimum perf or mance and durability of your air conditioner , it needs to be run periodically . Operate the air conditioner at least once a month for one min ute w[...]
-
Page 78
77 O THER CONTROLS AND EQUIPMENT P arking Brake Le ver ............................................................. 4-1 Pedal ....................................................................................... 4- 2 Gear Lever ............................................................................. 4-2 Fuel Filler Cap .....................[...]
-
Page 79
78 P arking Brake Lever 62J100 (1) T o apply (2) T o release (3) T o release The par king brak e lev er is located between the seats. T o apply the par king brake , hold the brak e pedal down and pull the parking brak e lev er all the wa y up . T o release the parking brake , hold the brak e pedal down, pull up slightly on the parking brake le ve r[...]
-
Page 80
79 P edal 54G040 Clutch P edal (1) The clutch pedal is used to disengage the drive to the wheels when star ting the engine, stopping, or shifting the transmission le ver . Depressing the pedal disengages the clutch. CA UTION • Do not drive with your f oot resting on the c lutch pedal. It could result in excessive c lutch wear , c lutch damage, or[...]
-
Page 81
80 Fuel Filler Cap (T ype 1 & T ype 2) 63J053 Dzire 63J054 The fuel filler cap is located on the left rear side of the vehicle . The fuel filler lid can be unlock ed by pulling up the opener lev er located on the outboard side of the driver’ s seat and loc ked b y simply closing the lid. Remove the fuel filler cap slo wly . The fuel may be un[...]
-
Page 82
81 F o l d i n g Rear Seats (if equipped) The rear seat(s) of your v ehicle can be folded f orward to pro vide additional cargo space. T o fold the rear seats f orward: 62J059 1) Hook the webbing and the latch plate of the outboard lap-shoulder belt in the belt hangers. CA UTION • When you move a seatbac k, make sure both the latch plate and the [...]
-
Page 83
82 Sun Visor 60A158 The sun visors can be pulled down to bloc k glare coming through the windscreen, or the y can be unhooked and turned to the side to block glare coming through the side window . CA UTION When unhooking and hooking a sun visor , be sure to handle it b y the hard plastic parts or the sun visor can be damaged. O THER CONTROLS AND EQ[...]
-
Page 84
83 O THER CONTR OLS AND EQUIPMENT 4-6 63J061 NO TE: The number of doors in v olved in the lighting operation of the interior light depends on the vehicle specification. If there is a s witch (r ubber projection) at the door opening as shown, the door is inv olv ed in the lighting operation. The tailgate is also inv olved in this oper ation e ven wi[...]
-
Page 85
84 Ashtray 63J041 Y ou can fit the ashtra y (1) into any of the cup holders on the centre console. Make sure tobacco is fully e xtin- guished before c losing the ashtra ys. Never thr ow waste in the ashtra ys: it could create a fire hazar d. O THER CONTROLS AND EQ UIPMENT 4-7 Cigarette Lighter and Ashtray (if equipped) 63J040 Cigarette lighter T o [...]
-
Page 86
85 Bonnet 63J063 T o open the bonnet: 1) Pull the bonnet release handle located on the outboard side of the driver’ s side of the instrument panel. This will disengage the bonnet lock halfw ay . CA UTION T o av oid damaging the assist grip and the molded headlining, do not hang down the assist grip. Assist grip is not pro vided in driver seat. O [...]
-
Page 87
86 63J065 3) Contin ue to lift up the bonnet until it is high enough to suppor t with the prop rod. T o close the bonnet: 1) Lift the bonnet up slightly and remov e the prop rod from the hole. Put the prop rod bac k to the holding clip. 2) Low er the bonnet close to the bumper , then let it drop down. Make sure the bonnet is securely latched after [...]
-
Page 88
87 Frame Hooks Fr ont 63J117 The towing hook (1) is pro vided on the front of the vehicle f or use in emergency situations. T o install the hook (1), f ollow the proce- dure below . 63J118 1) Pick up the to wing hook (1) and jack handle (A). The to wing hook and jack handle in the storage bag are sto wed just under the spare tyre in the luggage com[...]
-
Page 89
88 63J121 4) T o tighten the towing hook (1), turn it clockwise b y using a jack handle (A) until the hook (1) is securely installed. T o remov e the towing hook (1), re v erse the procedure used to install the towing hook. Rear (if equipped) T ype 1 & T ype 2 63J122 Dzire 63J122 O THER CONTROLS AND EQ UIPMENT 4-11 63J119 2) Remov e the cov er [...]
-
Page 90
89 63J123 63J124 The hooks (3) and frame holes (4) are provided f or shipping purposes only . T yre Changing T ool (T ype 1 & T ype 2) 77J024 O THER CONTR OLS AND EQUIPMENT 4-12 (Dzire) 55KS031 The frame hook (2) is pro vided on the rear of the vehicle f or use in emergency situations. T o tow y our v ehicle on the road or highwa y , follo w th[...]
-
Page 91
90 63J070 T o remov e the jac k, tur n its shaft counter- clockwise and pull the jac k out of the storage br ack et. T o stow the jack, place it in the storage brac ket and turn the shaft clockwise until the jac k is securely held in place. O THER CONTROLS AND EQ UIPMENT 4-13 77J036 T o remov e the spare tyre, turn its bolt counterclockwise and rem[...]
-
Page 92
91 Front Seat Bac k P oc ket (if equipped) 64J127 This pock et is provided f or holding light and soft things such as glov es, newspapers or magazines . Do not put hard or breakable objects in the pocket. If an accident occur s, objects such as bottles, cans, etc. can injure the occupants in the rear seat. Luggage Compartment Cover (if equipped) 63[...]
-
Page 93
92 O THER CONTROLS AND EQ UIPMENT 4-15 Lugga ge Compar tment Light (if equipped) 63J075 When you open the tailgate with the luggage compar tment light switch in the “ON” position (1), the light comes on and remains on as long as you k eep the tailgate open. When the luggage compar tment light s witch is in the “OFF” position (2), the light [...]
-
Page 94
93 Radio Antenna (if equipped) 62J073 The radio antenna is remov able. T o remov e the antenna, tur n it counterclock- wise. T o reinstall the antenna, tur n it clockwise firmly by hand. CA UTION T o avoid dama ge to the radio antenna: • Remove or f old down the antenna when using an automatic car wash. • Remo ve the antenna when the antenna hi[...]
-
Page 95
94[...]
-
Page 96
95 OPERA TING Y OUR VEHICLE Exhaust Gas Warning ........................................................... 5-1 Daily Inspection Chec klist ................................................... 5-1 Engine Oil Consumption ..................................................... 5-2 Star ting the Engine ....................................................[...]
-
Page 97
96 Exhaust Gas W arning 52D147 A void breathing e xhaust gases. Exhaust gases contain carbon mono xide, a potentially lethal gas that is colorless and odourless. Since carbon monoxide is difficult to detect by itself, be sure to take the follo wing precautions to help prevent carbon mono xide from entering y our vehicle. • Do not leave the engine[...]
-
Page 98
97 4) Make sure the bonnet is fully closed and latched. 5) Check the headlights, turn signal lights, brake lights and horn for proper operation. 6) Adjust the seat and adjustable head restraint (if equipped). 7) Check the brake pedal and the parking brake le v er . 8) Adjust the mirrors. 9) Make sure that you and all passengers hav e properly faste[...]
-
Page 99
98 driving. This is because the oil is gradually becoming diluted with fuel or moisture, making it appear that the oil lev el has not changed. Y ou should also be aware that the diluting ingredients e vaporate out when the v ehicle is subsequently driven at high speeds, such as on an express wa y , making it appear that oil is excessiv ely consumed[...]
-
Page 100
99 (For Diesel Engine) Cold engine T urn the ignition switch to the “ON” position and wait until the glo w plug indicator goes out if it comes on. Crank the engine b y tur ning the ignition ke y to “ST ART”. Release the ke y when the engine star ts. CA UTION • Stop turning the star ter immedi- ately after the engine has started or the sta[...]
-
Page 101
100 54G263 K eep the engine speed so it does not get into the red z one of tachometer . • Reduce y our speed and change down to a lo wer gear before going down a long or steep hill. A lo wer gear will allow the engine to pr ovide braking. A void riding the brakes or they ma y overheat, resulting in brake failure. • When driving on slippery r oa[...]
-
Page 102
101 If water gets into the brake drums, brake performance ma y become poor and unpredictable. After driving through water or wash- ing the underside of the vehic le, test the brakes while driving at a slow speed to see if they ha ve maintained their normal effectiveness. If the brakes are less effective than normal, dr y them by repeatedl y applyin[...]
-
Page 103
102 63J081 (1) ABS warning light (2) Brak e system warning light • If the ABS warning light (1) on the instrument panel comes on and sta ys on while driving, there ma y be a prob lem with the ABS system. Ask y our MARUTI SUZUKI dealer to inspect the ABS system immediately . If the ABS system becomes inoperative, the brake system will function as [...]
-
Page 104
103 Running-in CA UTION The future performance and reliability of the engine depends on the care and restraint exer cised during its early life. It is especiall y important to obser ve the following precautions during the initial 960 km (600 miles) of vehicle operation. • After starting, do not race the engine. Warm it up graduall y . • Av oid [...]
-
Page 105
104 54G071S Be careful where you park and drive; the catalytic con verter and other exhaust components can get very hot. As with any vehicle, do not park or operate this vehicle in areas where combustible materials suc h as dry grass or leaves can come in contact with a hot exhaust system. Impro ving Fuel Econom y The follo wing instr uctions will [...]
-
Page 106
105 DRIVING TIPS High-Speed Driving ............................................................... 6-1 Driving on Hills ..................................................................... 6-1 Driving on Slippery Roads .................................................. 6-2 DRIVING TIPS[...]
-
Page 107
106 52D078S • Wear Y our Seat Belts at All Times. Even though air bags are equipped at the fr ont seating positions, the driver and all passengers should be properly restrained at all times, using the seat belts pro vided. Refer to the “Seat Belts and Child Restraint Systems” section for instructions on proper use of the seat belts. • Ne ve[...]
-
Page 108
107 T ry not to hold the brake pedal down too long or too often while going down a steep or long hill. This could cause the brakes to overheat, result- ing in reduced braking efficiency . Failure to take this precaution could result in loss of vehicle contr ol. CA UTION When descending a down hill, NEVER turn the ignition key to the “OFF” posit[...]
-
Page 109
108 54G074S W ARNING In addition to f ollowing the driving tips in this section, it is impor tant to observe the follo wing precautions. • Make sure y our tyres are in good condition and alw ays maintain the specified tyre pressure. Ref er to “T yres” in the “INSPECTION AND MAINTENANCE” section for details. • Do not use tyres other than[...]
-
Page 110
109 VEHICLE LO ADING AND T O WING V ehic le Loading ..................................................................... 7 -1 T railer T owing ........................................................................ 7- 1 T owing Y our V ehicle (recreational towing) ........................ 7-5 VEHICLE LO ADING T O WING[...]
-
Page 111
110 V ehic le Loading Y our vehicle w as designed f or specific weight capacities. The weight capacities of your v ehicle are indicated by the Gross V ehicle W eight Rating (GVWR) and the Gross Axle Weight Rating (GA WR, front and rear). The GVWR and GA WR (front and rear) are listed in the “SPECIFICA TIONS” section. GVWR – Maximum permissibl[...]
-
Page 112
111 Some countries hav e regulations which specifically allow trailer to wing up to a specified maximum trailer w eight (registered or statutor y towing capacity , whichev er is smaller); v ehicles sold in these countries can be used to tow a light trailer , provided the tr ailer does not exceed the maximum tr ailer weight specified in the countr y[...]
-
Page 113
112 V ehicle/T railer Loading T o load your v ehicle and trailer properly , you must kno w how to measure g ross trailer weight and tr ailer nose weight. Gross T railer Weight is the weight of the trailer plus all the cargo in it. Y ou can measure gross trailer w eight by putting the fully loaded trailer on a vehicle scale . Nose Weight is the down[...]
-
Page 114
113 Y our vehicle will handle differently when towing a trailer . For y our safety and the safety of others, y ou should observe the follo wing precautions: • Practice turning, stopping, and reversing bef ore you begin to wing in traffic. Do not tow in traffic until you are confident that y ou can han- dle the vehicle and trailer saf ely . • Ne[...]
-
Page 115
114 60A186 When parking your vehic le and connected trailer , alwa ys use the follo wing procedure: 1) Apply the vehicle’ s brakes firmly . 2) Have another person place wheel choc ks under the wheels of the vehicle and the trailer while y ou are holding the brakes. 3) Slowl y release the brakes until the wheel choc ks absorb the load. 4) Fully en[...]
-
Page 116
115 When you to w your vehic le, follow the instructions below to a void accidents and damage to your vehicle. In addition, be sure to observe government and local requirements regarding vehic le lighting and trailer hitches or tow bars. T O WING INSTRUCTION T ABLE DRIVE TRANS T O WING TRAIN MISSION METHOD 2WD M/T (MANU AL) A / B VEHICLE LO ADING T[...]
-
Page 117
116 A: 2WD VEHICLES WITH MANU AL TRANSMISSION 1) Secure the front wheels on a towing dolly according to the instructions provided b y the dolly manuf acturer . 2) Release the par king brake . 75J019 VEHICLE LO ADING AND T O WING 7-7[...]
-
Page 118
117 B: 2WD VEHICLES WITH MANU AL TRANSMISSION 1) Shift the manual transmission le v er into neutral. 2 ) T ur n the ignition ke y to the “A CC” position to unlock the steering wheel. 3) Release the par king brake . CA UTION The steering column is not strong enough to withstand shocks transmitted fr om the front wheels during towing. Always unlo[...]
-
Page 119
118[...]
-
Page 120
119 INSPECTION AND MAINTENANCE Maintenance Schedule ......................................................... 8-2 P eriodic Maintenance Sc hedule ......................................... 8-2 Drive Belt ............................................................................... 8-6 Engine Oil and Filter .........................................[...]
-
Page 121
120 60A187S W ARNING Y ou should take extreme care when working on y our vehicle to pre vent accidental injury . Here are a fe w precautions that y ou should be especially careful to observe: (Continued) (Continued) • T o pre vent damage or unintended activation of the air ba g system or seat belt pretensioner system, be sure the battery is disco[...]
-
Page 122
121 Maintenance Schedule 77J030 The follo wing table sho ws the times when you should perf or m regular maintenance on your v ehicle . This table sho ws in kilometers and months when you should perfo r m inspections, adjustments, lubrication and other ser vices. MARUTI SUZUKI recommends that mainte-nance on your MAR UTI SUZUKI vehicle be perf ormed[...]
-
Page 123
122 Inter v al: This interval should be judged b y odometer reading or months, whiche ver comes first. FREE INSPECTION PERIODIC MAINTENANCE A T COST km (x1000) 1 5 10 20 30 40 50 60 7 0 80 months 1 6 12 24 36 48 60 72 84 96 INSPECTION AND MAINTENANCE 8-3 ENGINE 1-1. W ater pump drive belt (T ension, W ear) P etrol A I I I I I I R A I 1-2. Engine Co[...]
-
Page 124
123 Inter v al: This interval should be judged b y odometer reading or months, whiche ver comes first. FREE INSPECTION PERIODIC MAINTENANCE A T COST km (x1000) 1 5 10 20 30 40 50 60 7 0 80 months 1 6 12 24 36 48 60 72 84 96 INSPECTION AND MAINTENANCE 8-4 CLUTCH AND TRANSMISSION 4-1. Clutch P edal (Play) P etrol I I I I I I IIII 4-2. Clutch Fluid (L[...]
-
Page 125
124 Inter v al: This interval should be judged b y odometer reading or months, whiche ver comes first. FREE INSPECTION PERIODIC MAINTENANCE A T COST km (x1000) 1 5 10 20 30 40 50 60 7 0 80 months 1 6 12 24 36 48 60 72 84 96 INSPECTION AND MAINTENANCE 8-5 ELECTRICAL 10-1. Batter y electrolyte (Lev el, leakage) I I I I I I IIII 10-2. W ir ing har nes[...]
-
Page 126
125 Drive Belt When the engine is running, keep hands, hair , clothing, tools, etc. away from the mo ving fan and drive belts. Make sure the drive belt tension is correct. If the belt is too loose, insufficient battery charging, engine ov erheating, poor power steering, poor air conditioning, or e xcessive belt w ear can result. When y ou press the[...]
-
Page 127
126 Specified Oil (For Diesel Engine) 84E010 Be sure that the engine oil you use comes under the quality classification of A CEA B3. Select the appropriate oil viscosity according to the abov e char t. The recommended Engine Oil is SF 15 W 40, API-CG4 or abov e. Oil Level Chec k ( For Petr ol Engine) 80G064 (For Diesel Engine) 84E012 (1) MIN (2) MA[...]
-
Page 128
127 CA UTION Failure to c heck the oil le vel regularly could lead to serious engine troub le due to insufficient oil. Refilling (P etrol Engine) 65D444 Changing Engine Oil and Filter Drain the engine oil while the engine is still warm. 77J031 1) Remov e the oil filler cap . 2) Place a drain pan under the dr ain plug. 3) Using a wrench, remove the [...]
-
Page 129
128 60G306 Tightening torque f or drain plug: For Petr ol Engine 50 Nm (5.0 kg-m, 36.5 lb-ft) For Diesel Engine 20 Nm (2.0 kg-m, 14.5 lb-ft) Note: W asher (1) should be replaced e very time when opened. New and used oil can be hazar dous. Children and pets may be harmed b y swallowing ne w or used oil. K eep new and used oil and used oil filter s a[...]
-
Page 130
129 4) Reinstall the drain plug and gask et. Tighten the plug with a wrench to the specified torque. Replace the Oil Filter 1) Using an oil filter wrench, tur n the oil filter counterclockwise and remo ve it. 2) Using a clean rag, wipe off the mount- ing surface on the engine where the new filter will be seated. 3) Smear a little engine oil around [...]
-
Page 131
130 CA UTION T o tighten the oil filter properly , it is Important to accurately identify the position at which the filter gasket first contacts the mounting surface. 5) Tighten the filter specified tur n from the point of contact with the mounting surface (or to the specified torque) using an oil filter wrench. Tightening torque f or oil filter ?[...]
-
Page 132
131 bottom of the plug hole, the oil le vel is correct. If so , reinstall the plug. 4) If the oil lev el is low , add gear oil through the oil filler plug hole (1) until the oil le vel reaches the bottom of the filler hole, then reinstall the plug. Tightening torque (1): 21 Nm (2.1 kg-m, 15.5 lb-ft) After driving the vehicle, the trans- mission oil[...]
-
Page 133
132 Selection of Coolant T o maintain optimum perf or mance and durability of your engine , use MAR UTI Genuine Coolant or equiv alent. This type of coolant is best for y our cooling system as it: • Helps maintain proper engine tempera- ture. • Gives proper protection against freezing and boiling. • Gives proper protection against corrosion a[...]
-
Page 134
133 CA UTION • The mixture y ou use should contain 50% concentration of antifreeze . • If the lowest ambient temperature in your area is e xpected to be – 35°C (–31°F) or below , use higher concentrations up to 60% follo wing the instructions on the antifreeze container . • When putting the cap on the reserv oir tank, line up the arr ow[...]
-
Page 135
134 CA UTION Damage may result if the washer motor is operated with no fluid in the washer tank. Air Cleaner (For Petr ol Engine) 77J033 (For Diesel Engine) 62J130 If the air cleaner is clogged with dust, there will be greater intak e resistance, resulting in decreased pow er output and increased fuel consumption. Unclamp/unscre w the side clamps/s[...]
-
Page 136
135 Spark Plugs (P etrol Engine) 77J034 54G105 Y ou should inspect spar k plugs periodi- cally for carbon deposits . When carbon accumulates on a spark plug, a strong spark may not be produced. Remov e carbon deposits with a wire or pin and adjust the spark plug gap . T o access the spark plugs: 1) Remov e the two bolts (1) fixing the air cleaner a[...]
-
Page 137
136 60G160S CA UTION • When installing the spark plugs, screw them in with y our fingers to av oid stripping the threads. Tighten with a torque wrench to 25 Nm (2.5 kg-m, 18.0 lb-ft). Do not allo w contaminants to enter the engine thr ough the spark plug holes when the plugs are removed. • Never use spark plugs with the wrong thread size. 54G10[...]
-
Page 138
137 The fuel filter works as a water sedimentor as well. Drain water according to the P er iodic Maintenance Schedule. T o drain water: 1) Place a pan or ample rag under the fuel filter drain nozzle . 2) Loosen the drain knob . The water will be drained. 3) Tighten the drain knob when the water changes to the diesel fuel. 4) Tighten the drain knob [...]
-
Page 139
138 Brake fluid is harmful or fatal if swallowed, and harmful if it comes in contact with skin or eyes. If swallowed, do not induce v omiting. Immediately contact a poison control centre or a physician. If brake fluid gets in eyes, flush ey es with water and seek medical attention. W ash thoroughl y after handling. Solution can be poisonous to anim[...]
-
Page 140
139 Parking Brake 54G109 Ratchet tooth specification “b”: 4th – 9th Lever pull f orce (1): 200 N (20 kg, 44 lbs) Check the parking brak e for proper adjustment by counting the number of clic ks made by the ratchet teeth as y ou slowly pull up on the par king brak e lev er to the point of full engagement. The parking brak e lev er should stop [...]
-
Page 141
140 Fluid Control Clutch (if equipped) 62J102 Check the clutch pedal f or smooth operation and brake fluid le vel from time to time . If clutch dragging is f elt with the pedal fully depressed, hav e the clutch inspected by your MAR UTI SUZUKI dealer . If the brake fluid lev el is near the “MIN” line , fill it up to the “MAX” line with MAR [...]
-
Page 142
141 54G136 (1) T read wear indicator (2) Indicator location mark 2 ) Check that the depth of the tread groov e is more than 1.6 mm (0.06 in.). T o help you chec k this, the tyres hav e molded-in tread wear indicators in the groov es. When the indicators appear on the tread surf ace, the remaining depth of the tread is 1.6 mm (0.06 in.) or less and [...]
-
Page 143
142 Changing Wheels T ype 1 & T ype 2 77J024 Dzire 55KS031 77J036 T o change a wheel, use the f ollowing procedure: 1) Clear all passengers and luggage from the v ehicle. 2) Remov e the jack, tools and spare wheel from the vehicle . 3) Loosen, but do not remo ve the wheel n uts. 4) Jac k up the vehicle (f ollow the jac king instructions in the [...]
-
Page 144
143 6. Nev er run the tyre beyond TWI (T read wear indicator). The tyre is recommen- ded to be replaced when the remaining tread has worn to this point. The indicators are spaced across the tread around the tyre marked by a triagular symbol (TWI). 7. Always pref er tubeless tyre mounting machine. In case of manual mounting- tyre/wheel rim damage ma[...]
-
Page 145
144 INSPECTION AND MAINTENANCE 8-25 Battery • Batteries produce flammable hydr ogen gas. Keep flames and sparks awa y from the battery or an explosion ma y occur . Never smoke when working in the vicinity of the battery . • When chec king or servicing the battery , disconnect the negative cable. Be careful not to cause a shor t circuit b y allo[...]
-
Page 146
145 INSPECTION AND MAINTENANCE 8-26 Fuses in the Engine Compartment (P etrol Engine) 62J085 62J086 75J026 For maintenance-free battery (cap-less type), you need not add w ater . The le vel of the battery solution must be kept between the “Max” and the “Min” le v el lines at all times. If the le vel is f ound to be below the “Min” lev el[...]
-
Page 147
146 INSPECTION AND MAINTENANCE 8-27 Fuses in the Engine Compartment (Diesel Engine) 62J124 62J125 (22) 30A Star ting motor fuse (23) – Blank (24) 50A P ow er steer ing control module fuse (25) 30A Ignition switch fuse (26) 30A Radiator fan fuse (27) – Blank (28) 30A ABS control module fuse (29) – Blank (30) – Blank (31) 15A Front f og light[...]
-
Page 148
147 INSPECTION AND MAINTENANCE 8-28 60G111 If the main fuse or a primary fuse blo ws, be sure to have y our vehicle inspected by an authorized MAR UTI SUZUKI dealer . Ne ver use a substitute such as a wire e ven for a temporary repair , or extensive electrical damage and a fire can result. NO TE: Make sure that the fuse bo x alwa ys carries spare f[...]
-
Page 149
148 INSPECTION AND MAINTENANCE 8-29 The fuse bo x is located under the dr iver’ s side of the dashboard. Remov e the fuse bo x cov er by pushing in at both ends and pulling off the cov er . 63J095 MAIN FUSE/PRIMAR Y FUSE (1) – Blank (2) 15A Ignition coil (3) 10A Back-up light (4) 10A Meter (5) 15A Cigar (6) 15A Accessory (7) 30A P ow er window [...]
-
Page 150
149 INSPECTION AND MAINTENANCE 8-30 Interior Light 60G115 Pull down the lens b y using a plane scre w driver co vered with a soft cloth as shown. T o install it, simply push it bac k in. The bulb can be remo v ed by simply pulling it out. When replacing the b ulb, mak e sure that the contact springs are holding the b ulb securely . Bulb Replacement[...]
-
Page 151
150 INSPECTION AND MAINTENANCE 8-31 Other General Lights Bulb holder 54G123 (1) Remov al (2) Installation T o remov e a bulb holder from a light housing, tur n the holder counterclockwise and pull it out. T o install the holder, push the holder in and turn it clockwise. Headlight 70G135 Open the bonnet. Disconnect the coupler . Remov e the sealing [...]
-
Page 152
151 Rear combination light T ype 1 & T ype 2 63J098 Dzire INSPECTION AND MAINTENANCE 8-32 Bulb 54G124 (3) Remov al (4) Installation There are two types of b ulb, “Full glass type” (1) and “Glass/metal type” (2). T o remov e and install a full glass type bulb (1), simply pull out or push in the bulb . T o remove a glass metal type b ulb [...]
-
Page 153
152 High-mount stop light T ype 1 & T ype 2 63J106 T o remov e a high-mounted stop light housing the following procedure: 1) Open the tailgate, and remov e the nuts (1) as shown in the illustr ation. INSPECTION AND MAINTENANCE 8-33 Licence plate light 75F087 Luggage compartment light (if equipped) 63J099 T runk room light (if equipped) 56KN004[...]
-
Page 154
153 Dzire 54G306 INSPECTION AND MAINTENANCE 8-34 77J038 2 ) Close the tailgate. Remov e a highmounted stop light housing (2) from the tailgate. 75J027 3) Loosen the two screws (3) as shown in the illustration and remo ve the b ulb holder (4). 4) Replace the bulbs . T o install a high-mounted stop light housing in the re verse order of remov al.[...]
-
Page 155
154 54G130 2) Squeeze loc k (1) towards wiper arm (2) and remov e the wiper frame from the ar m as shown. 3) Unlock the loc k end of the wiper blade and slide the blade out as sho wn. INSPECTION AND MAINTENANCE 8-35 Wiper Blades 54G129 If the wiper blades become brittle or dam- aged, or make streaks when wiping, replace the wiper blades . T o insta[...]
-
Page 156
155 For rear wipers: 80G146 1) Hold the wiper ar m aw ay from the window . 2) Remov e the wiper frame from the arm as shown. 3) Slide the blade out as shown. INSPECTION AND MAINTENANCE 8-36 Remov al 60A260 Installation 54G132 (1) Lock ed end 54G135 4) If the ne w blade is pro vided without the two metal retainers (1) , mo ve them from the old blade[...]
-
Page 157
156 Air Conditioning System If you do not use the air conditioner f or a long period, such as during winter, it ma y not give the best perf ormance when you star t using it again. T o help maintain optimum perf ormance and durability of y our air conditioner, it needs to be run periodically . Oper ate the air conditioner at least once a month f or [...]
-
Page 158
157 EMERGENCY SER VICE Jacking Inst ruct ions ............................................................. 9 -1 J ump Star ting Instructions ................................................. 9- 2 T owing ..................................................................................... 9-4 If the Star ter Does Not Operate ......................[...]
-
Page 159
158 Jacking Instructions T ype 1 & T ype 2 77J024 Dzire 75F062 1) Place the vehicle on lev el, hard ground. 2) Set the parking brake firmly and shift into “R” (Re verse). Block the front and rear of the wheel diagonally opposite of the wheel being lifted. 3) T ur n on the hazard warning flasher if your v ehicle is near traffic. 4) Get down [...]
-
Page 160
159 63J101 5) P osition the jack v er tically and raise the jack b y tur ning the jack handle clockwise until the jac k head recess fits the jacking point. 6) Continue to raise the jac k slowly and smoothly until the tyre clears the ground. Do not raise the vehicle more than necessar y . CA UTION Never jac k up the vehicle with passengers inside th[...]
-
Page 161
160 CA UTION Y our vehicle should not be started by pushing or to wing. This star ting method could result in permanent damage to the catalytic con verter and high pressure fuel pump (diesel). Use jump leads to star t a vehicle with a weak or flat battery . When J ump Star ting Y our V ehicle, Use the Following Pr ocedure: 1) Use only a 12 volt bat[...]
-
Page 162
161 T owing If you need to ha ve y our v ehicle towed, contact a professional service. Y our dealer can provide y ou with detailed towing instr uctions . CA UTION T o help avoid dama g e to your vehic le during towing, proper equipment and towing procedures m ust be used. Manual transmission v ehicles ma y be tow ed using either of the following me[...]
-
Page 163
162 If the Engine is Flooded If the engine is flooded with petrol, it ma y be hard to star t. If this happens, press the accelerator pedal all the w ay to the floor and hold it there while cranking the engine. (Do not operate the star ter motor f or more than 15 seconds). If the Engine Overheats The engine could o verheat temporarily under sev ere [...]
-
Page 164
163 65D350 EMERGENCY SER VICE 9-6 P etrol Engine Diesel Engine • It is hazar dous to remove the radiator cap when the water temperature is high, because scalding fluid and steam may be blo wn out under pressure . The cap should only be taken off when the coolant temperature has lowered. • T o help prevent personal injury , keep hands, tools and[...]
-
Page 165
164[...]
-
Page 166
165 BOD Y WORK CARE Corrosion Prevention ......................................................... 10-1 V ehic le Cleaning ................................................................. 10-2 BOD Y WORK CARE[...]
-
Page 167
166 Corr osion Prevention It is impor tant to take good care of y our v ehicle to protect it from corrosion. Listed below are instructions for ho w to maintain your v ehicle to prev ent corrosion. Please read and follo w these instructions carefully . Impor tant Inf ormation About Corrosion Common causes of corrosion 1) Accum ulation of road salt, [...]
-
Page 168
167 Store your vehic le in a dry , well-venti- lated area Do not park your vehicle in a damp , poorly ventilated area. If you often wash y our vehicle in the garage or if y ou frequently dr iv e it in when wet, y our garage ma y be damp . The high humidity in the garage may cause or acceler ate corrosion. A wet vehicle ma y corrode e ven in a heate[...]
-
Page 169
168 Carpets Remov e dir t and soil as much as possib le with a v acuum cleaner . Using a mild soap solution, rub stained areas with a clean damp cloth. T o remove soap , rub the areas again with a cloth dampened with water . Repeat this until the stain is remov ed, or use a commercial car pet cleaner f or tougher stains. If y ou use a carpet cleane[...]
-
Page 170
169 3) W ash the entire exterior with a mild detergent or car wash soap using a sponge or soft cloth. The sponge or cloth should be frequently soaked in the soap solution. CA UTION When using a commercial car wash product, observe the cautions specif- ied by the man ufacturer . Never use st- rong household deter gents or soaps. 4) Once the dir t ha[...]
-
Page 171
170[...]
-
Page 172
171 GENERAL INFORMA TION V ehic le Identification .......................................................... 11-1 GENERAL INFORMA TION[...]
-
Page 173
172 V ehic le Identification Chassis Serial Number 62J093 63J105 The chassis and/or engine serial numbers are used to register the vehicle . The y are also used to assist your dealer when ordering or referring to special ser vice information. Whene ver you have occasion to consult your MAR UTI SUZUKI dealer, remember to identify your v ehicle with [...]
-
Page 174
173 SPECIFICA TIONS NO TE: Specifications are subject to change without notice. ITEM: Dimensions UNIT : mm T ype-1 T ype-2 Dzire Ov erall length 3,695 3,760 4,160 Ov erall width 1,690 1,690 1,690 Ov erall height 1,530 1,530 1,530 Wheelbase 2,390 2,390 2,390 T rack front 1,470 1,470 1,470 rear 1,480 1,480 1,480 Ground clearance 170 170 170 ITEM: Mas[...]
-
Page 175
174 ITEM: Engine Petr ol Diesel T ype G13BB (SOHC) Z13DTJ (DOHC) Number of cylinders 4 4 Bore 74.0 mm 69.6 mm Stroke 75.5 mm 82.0 mm Piston displacement 1,298 cm 3 (1,298 cc) 1,248 cm 3 (1,248 cc) Compression r atio 8.8 - 9.2 : 1 17.6 ± 0.4 : 1 ITEM: Electrical Standard spar k plug (P etrol Engine) MICO: FR6DC4 CHAMPION: RC8YC Batter y P etrol 38B[...]
-
Page 176
175 ITEM: Lights W A TT A GE BULB No. Headlight 12V 60/55W H4 T ur n signal light F ront 12V 21W WY21W Rear 12V 21W P21W Side tur n signal light 12V 5W WY5W Clearance light 12V 5W W5 W T ail/brak e light 12V 5/21W P21/5W Licence plate light 12V 5W W5W Re versing light 12V 21W P21W Inter ior light 12V 10W – F ront fog light 12V 35W H8 Rear fog lig[...]
-
Page 177
176 ITEM: Steering T oe-in P etrol F ront (IN 2 ± 2 mm) / Rear ( 4.5 ± 5. 4 mm) Diesel Camber angle P etrol F ront (0° 0’ ± 1°) / Rear (-1°00’ ± 1°) Diesel Caster angle P etrol F ront (5° 06’ ± 2°) / Rear (-) Diesel ITEM: Capacities (Appro x.) Coolant (including reser voir tank) P etrol 4.75 L Diesel 5.5 L Fuel tank 43 L Engine oil[...]