Barco SJ/T 11363-2006 manual

rëÉêÛë=dìáÇÉ map • Manual #: 26-1 204000-00 • Revision: 01[...]

ii PDS • User ’ s Guide map== √ ==rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco. June 2013 All rights reserved. No p art of this documen t may be copied, reproduc ed or translated. It shall not otherwise be recorded, transmitted or stored in a retr ieval system without the prior written consent of Barco. kçíáÅÉ Barco provides this man[...]

PDS • User ’s Guide iii agreed upon in the contract, al l guarantee claims of the purchaser will be rendered in valid. Not included in the guarantee coverage are system failures which are attribu ted to programs or special electronic circuitry prov id ed by the purchaser , e.g. interfa ces. Normal wear as well as normal maintenance are not subj[...]

iv PDS • User ’ s Guide léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tion in this summary is for operating personn el. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. T o avoid personal injury , do not remove th[...]

PDS • User ’s Guide v qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=i~ÄÉäáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., wh ich, if not strictly observed, could result in injury to or death of personnel. `^rqflk The exclamation point within an equilateral tria ngle is intended to alert the [...]

vi PDS • User ’ s Guide 中国大陆 RoHS `ÜáåÉëÉ=j~áåä~åÇ=oçep 根据中国大陆 《电子信息产品污染控制管理 办法》 （也称为中国大陆 RoHS） ， 以 下部分列出了 Barco 产品中 可能包含的有毒和 / 或有害物质的名称和含量。中国大 陆 RoHS 指令包含在中国信息 产业部 MCV ?[...]

PDS • User ’s Guide vii 在中国大陆销售的相应电子信息 产品 （EIP）都必须遵照中国 大陆 《电子 信息产品污染控制标识要求》标 准贴上环保使用期限 （EFUP）标签。 Barco 产品所采用的 EFUP 标签 （请参阅实例 ，徽标内部的编号使用于制 定产品）基于中国大陆的 《电[...]

viii PDS • User ’ s Guide `Ü~åÖÉ=eáëíçêó The table below lists the changes to the PDS User ’s Guide. T able 0-1. Change History Rev Date ECP # Description Approved By 00 January 3, 2006 599163 Initial release R. Pellicano 01 June 10, 2013 606851 Revisions for Firmware 3.00 R. Pellicano[...]

PDS • User ’s Guide ix q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K= N In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter Structure . . . . . . . . . . . . . . . [...]

x PDS • User ’s Guide Table of Contents Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Quick Function Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

PDS • User ’s Guide xi Table of Conte nts Input Selection Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Flip-flop Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Using Auto Acquire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79[...]

xii PDS • User ’s Guide Table of Contents Output Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Full Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 PIP Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

PDS • User ’s Guide xiii Table of Conte nts DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 EMAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 GATEWAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 IP . . . . . . . . . . . . . . . .[...]

xiv PDS • User ’s Guide Table of Contents OCSAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 OGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 ORBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 ORES . . . . . . . . . . . . . [...]

PDS • User ’s Guide xv Table of Conte nts PIPFREEZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 PIPFULL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PIPHPOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 PIPHSIZE . . . . . . . . . . . . . . . .[...]

xvi PDS • User ’s Guide Table of Contents[...]

PDS • User ’s Guide 1 N K==fåíê çÇìÅ íáçå få=qÜáë=`Ü~éíÉê This chapter is designed to introduce yo u to the PDS User ’s Guide. Areas to be covered are: • Chapter Structure • How to Use This G uide • Conventions • About the PDS • Connectivity Diagram • Application Qu es ti on s `Ü~éíÉê=píêìÅíìêÉ The[...]

2 PDS • User ’s Guide NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ This section provides important tips for streamlining your use of this User’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the desired location. All chapter files have t[...]

PDS • User ’s Guide 3 NK==fåíêçÇìÅíáçå About the PDS ^Äçìí=íÜÉ=map The following topics are discu ssed in this section: • Overview • Features • A Word About HDCP lîÉêîáÉï PDS is a high-quali ty dual-channel prese nta tion switcher designed to provide true seamless switching between various input source s. The PDS-[...]

4 PDS • User ’s Guide NK==fåíêçÇìÅíáçå About the PDS • The PDS supports DVI, analog computer and video formats on the DVI-I inputs. ~ HDCP protocol is supported, and the PDS is considered an HDCP repeater in this confi guration. In coming encrypted data is encrypted going out, and all analog outpu ts, pl us the freeze and LOGO stor[...]

PDS • User ’s Guide 5 NK==fåíêçÇìÅíáçå About the PDS ^=tçêÇ=^Äçìí=ea`m The PDS supports High-Bandwidth Digital C ontent Protection (HDCP), an industry-wide content protection syst em designed to prevent illegal copy ing of digital audio and video content across interfaces such as DisplayP ort (DP), High-Definiti on Multimedia [...]

6 PDS • User ’s Guide NK==fåíêçÇìÅíáçå Connectivity Diagram `çååÉÅíáîáíó=aá~Öê~ã The figure below illustra tes a basic PDS system. Figure 1-1. Block diagram, PDS system In the diag ram: • Up to nine sources can be connected to the PDS : ~ 4 x analog inputs (on HD-15 connectors), for a variety of YUV and RGBHV sources[...]

PDS • User ’s Guide 7 O K = = e ~ êÇï ~ êÉ = l êá Éå í ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides d etailed diagrams of th e PDS’s front and rear panels, along with comprehensive explanations of each. The following topics are discu ssed: • PDS Front Panel • PDS Rear Panel[...]

8 PDS • User ’s Guide 2. Hardware Orientation PDS Front Panel map=cêçåí=m~åÉä The figure below illustra tes the PDS front panel: Figure 2-1. PDS Front Panel Following are descriptions of each front panel sectio n: 1) Display Section The Display Sect ion includes a four-line display , the ADJUST knob and two “menu navigation” buttons:[...]

PDS • User ’s Guide 9 2. Hardware Orientation PDS Front Panel aáëéä~ó=pÉÅíáçå The figure below illustra tes the Display Section : Figure 2-2. Display Section with sample St atus Menu Descriptions of each button and control are provided below: • The Menu D isplay is a 4-line x 20-ch aracter V acu um Fluorescent Display (VFD) that sh[...]

10 PDS • User ’s Guide 2. Hardware Orientation PDS Front Panel • ESC — press to exit a menu without maki ng chan ges, cancel an operation, to answer “ No ” to certain menu queries, and to re turn to the top Stat us M en u . Each press takes you back up the menu tree by one level. fåéìíë=pÉÅíáçå The figure below illustra tes t[...]

PDS • User ’s Guide 11 2. Hardware Orientation PDS Front Panel • The SDI button sele cts the SD-SDI, HD-SDI, or 3G-SDI input source. • The LOGO b utton selects the stored “fu ll screen” LOGO image for th e next transition. If no image is stored, the tran sition will be to Black. Use the menu to select one of three stored LOGOs for use. [...]

12 PDS • User ’s Guide 2. Hardware Orientation PDS Front Panel ~ If “ Black Auto T ake ” is On : • Press BLACK to immediately transition to /from black. – If the transition is “ to ” black, the button blinks fast during the transition, then li ghts solid when black is on Program. – If the transition is “ from ” black, the butt[...]

PDS • User ’s Guide 13 2. Hardware Orientation PDS Rear Panel map=oÉ~ê=m~åÉä The figures below illustrate the rear pa nels for PDS-902, PDS-90 1, and PDS-701: Figure 2-1. PDS-902 Rear Panel Figure 2-1. PDS-901 Rear Panel Figure 2-1. PDS-701 Rear Panel Following are descriptions of each rear panel connector: 1) Analog Inpu t s Four HD-15 co[...]

14 PDS • User ’s Guide 2. Hardware Orientation PDS Rear Panel • 1920x1200@60 (193.25 MHz) • 2048x1080p@60 (183.75 MHz) ~ Composite and S-Video formats are supported. In Chapter 3, refer to the “ Format Connection T able ” section on page 22 for a table of analog inputs that you can con nect using a customer-supplied breakout cable. In A[...]

PDS • User ’s Guide 15 2. Hardware Orientation PDS Rear Panel One DB-9 connector is pr ovided for Serial communications wit h the PDS system. The port is also used for diagnostics or command -line operations.[...]

16 PDS • User ’s Guide 2. Hardware Orientation PDS Rear Panel[...]

PDS • User ’s Guide 17 PK==fåëí ~ää~íáçå få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructions for in stalling the PDS hardware. The following topics are discussed: • Safety Precautions • Unpacking and Inspection • Site Prep aration • Rack-Mount Installation • Cable and Ad ap ter Information • Signal Inst al[...]

18 PDS • User ’s Guide 3. Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all PDS installation pr ocedures, observe the following important safe ty and handling rules to avoid damage to yourself and the equipment: • T o protect users from electric shock, en su re that the power supplies fo r each unit connect to earth via[...]

PDS • User ’s Guide 19 3. Installation Cable and Adapter Informa tion • Rack mount each PDS chassis from the front rack ears using four rack screws (not supplied). Rack threads may be me tric or otherwise — depending upon th e rack type. • Install the lower of the two mounting holes first. `~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå [...]

20 PDS • User ’s Guide 3. Installation Cable and Adapter Information A ve rtissem ent La choix de la ligne de vo ltage se réalise automatiquement par le PDS T ransformateur Graphi que. On n' a pas besoin du controller u sager pour la choix de la ligne de voltage. W arnung Das PDS gerät mu beim Anschlu an 240V ~ mit einer vom VDE auf 250V[...]

PDS • User ’s Guide 21 3. Installation Signal Installation páÖå~ä=fåëí~ää~íáçå The figure below i llustrates a sample PDS system. Use this figure for refe rence during the signal installation process. Figure 3-1. PDS System Diagram (sample)  Use the following steps to install signals to/from the PDS: 1. Input connections — any[...]

22 PDS • User ’s Guide 3. Installation Format Connection Table 3. GUI connection — to configure your system to run from the bu ilt-in web-based GUI, perform the following steps: a. Ensure that your PC (or laptop) uses Windows® 7, Windows® 2000, or Windows XP . If using a mobile device, ensure that it uses one of the following operating syst[...]

PDS • User ’s Guide 23 3. Installation Format Connection Table are possible. Cells with checks denote the connections required for the indi cated format. Please contact Ba rco T echnical Support for information on obtaining breakout cables. In Appendix C, refer to the “ Contact Information ” section on page 173 for details. T able 3-2. Anal[...]

24 PDS • User ’s Guide 3. Installation Format Connection Table[...]

PDS • User ’s Guide 25 QK==léÉê ~íáçå få=qÜáë=`Ü~éíÉê This chapter provides co mprehensive me nu descriptions and detailed operating instructions for the PDS. The following to pics are discussed: • Control Overvi ew • Power-Up Initialization • Button St ates • Quick Setup and Operations • Menu T ree • U sing the Menu[...]

26 PDS • User ’s Guide 4. Operation Control Overview `çåíêçä=lîÉêîáÉï There are several ways to control the PDS: • The front panel is ideal for all basic oper ations. Available controls include the Display Section and the button s in the Inputs Section and the Effects Section . • The built-in web-based GUI is ideal for in tuiti[...]

PDS • User ’s Guide 27 4. Operation Button States illustration appears during initia lization: Figure 4-4. Logo Initialization Message (sample) After system initialization is complete, the Status M en u appears. _ìííçå=pí~íÉë Remember that there are three states for the buttons in the Inputs Section : • Off — the input is not selec[...]

28 PDS • User ’s Guide 4. Operation Quick Setup and Operations 6. Launch GUI — ( Optio nal ) If you want to run the system from the web-based GUI, ensure that Ethernet is connected betw een your PC and the PDS, then launch the GUI. (Chapter 5, “ GUI Oper atio ns ,” page 87.) 7. Set output format — Set the desired output resolution and f[...]

PDS • User ’s Guide 29 4. Operation Menu Tree jÉåì=qêÉÉ The figure below illustra tes the entire PDS menu tree. Please use this diagram for reference as you learn how to operate the system. Figure 4-5. PDS Menu T ree * The “ Auto Config ” selection in the Sizi ng Adjust and Timing Adjust menu is only available when an analog input is [...]

30 PDS • User ’s Guide 4. Operation Using the Menu System rëáåÖ=íÜÉ=jÉåì=póëíÉã This section lists the rules and conv entions for using PDS’s menu system. For reference, the figure below illustrate s the Setup Menu : Figure 4-6. Setup Menu (sample) For all setup menus, please note th e following important menu rules and convent[...]

PDS • User ’s Guide 31 4. Operation Using the Menu System • The SEL button is also used to answer “ Ye s ” to ce rtain menu queries. The ESC button is also used to answer “ No ” to cert ain menu queries. • If a value is displayed between brackets, (e.g., [SMPTE] ) this indicates that the value can not be changed. Note The display it[...]

32 PDS • User ’s Guide 4. Operation Quick Function Reference nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ Use the following table to quickly access the proper secti on for a specific function. Both hyperlinks and page numbers a re provided. T able 4-1. PDS Quick Function Reference T able How to : Use the Fo llowing S ection: Page Adjust backgrou[...]

PDS • User ’s Guide 33 4. Operation Quick Function Reference Set Auto Input Cfg mode Auto Input Cfg 62 Set Auto Input Save mode Auto Input Save 62 Set Auto T ake mode Auto T ake 63 Set Black Auto T ake mode Black Auto T ake 63 Set color inpu t space Co lorspace 40 Set DVI cable equalization DVI Cable Equal 70 Set Ethernet parameters Ethernet 66[...]

34 PDS • User ’s Guide 4. Operation Quick Function Reference Use the menu system U sing the Menu System 30 Use the Output Menu Output Menu 52 Use the Preview Menu Preview Menu (PDS 902 Only) 55 Use the Setup Menu Setup Menu 37 Use the S tatus Menu Statu s M en u 35 Use the System Menu System Menu 65 Use the User Preference Menu User Preference [...]

PDS • User ’s Guide 35 4. Operation Status Menu pí~íìë=jÉåì The Stat u s Me n u is the system’s top level display , which appears by default after the PDS boots up. • T o return to the Statu s Me nu from any point with in the Setup Menu , press ESC repeatedly . • T o display the Setup Me nu fr om the Sta tu s Me n u , pre ss SEL . [...]

36 PDS • User ’s Guide 4. Operation Status Men u • Next Input T ype — indicates the next input type on Program, and (if applicable), the system’s HDCP st atus. The following labels can app ear: ~ HDCP ~ DVI HDCP is OFF . • Next Input Format — Indicates the input formats on Program, in the form: Hact x Vact @ Vr Hz  1400x1050@59.94 [...]

PDS • User ’s Guide 37 4. Operation Setup Menu pÉíìé=jÉåì After PDS initialization is complete, the Stat u s M en u appears. This is the system’s top- level menu. Refer to the “ St atus Menu ” section on page 35 for details. T o display the Set up Menu from the Statu s M e nu , press SEL . The figure below illustra tes the Setup Me[...]

38 PDS • User ’s Guide 4. Operation Setup Menu fåéìí=jÉåì From the Setup Menu , select Input to display the Input Menu . The Input Menu enables you to set pa rameters for the selected inpu t on Prog ram. The format of the selected input on Program is shown on th e second line. Figure 4-9. Input Menu (sample) The Input Menu can be used in[...]

PDS • User ’s Guide 39 4. Operation Setup Menu The following sections provi de detailed information about Input Menu f unctions: fåéìí=cçêã~í From the I nput Menu , select the top Input Format line to view the “auto-acquired” format for the selected input, or to change the forma t. The format is shown in the following form: Hact x V[...]

40 PDS • User ’s Guide 4. Operation Setup Menu ^Çàìëí=lå In the Input Menu , the Adjust On field indicates whether any changes you make using the Input Menu will be applied to the Previe w or Program source. For example, if you select Preview , as show n in the illustration below , and change the Background, Color Balance, or other parame[...]

PDS • User ’s Guide 41 4. Operation Setup Menu • When the following formats are detected as either SD -SDI, HD-SDI, or 3G-SDI, only [SMPTE] is shown. ^ìíç=^ÅèìáêÉ The Auto Ac quire field is only adjustable b etween ON and OFF whe n Auto Acqu ire is set to INPUT in the User Preference Menu (refer to the “ User Preference Menu ” se[...]

42 PDS • User ’s Guide 4. Operation Setup Menu • Direct measurement of the signal If the input signal’s timing is to o different from the saved configurat ion, a good lock may not be possible. In this situation, the “ Invalid Signal” message is displayed, and the video output will be black. Y o u will also see “ Invalid Signal” if t[...]

PDS • User ’s Guide 43 4. Operation Setup Menu páòáåÖ=^Çàìëí From the Input Menu , select Si zing Adjust to display the Sizing Ad ju st Menu , which allows for exact positioning of the input's active area. Figure 4-12. Sizing Adjust Menu (sample) The following functions are available: • Size and Position — These functions all[...]

44 PDS • User ’s Guide 4. Operation Setup Menu qáãáåÖ=^Çàìëí From the Input Menu , select Timin g A d ju st to display the Timing Adjust Menu , whi ch allows for adjustments to input sampling, sampling phase, pi xel counts, and line counts. Figure 4-13. Timing Adjust Menu (sample) The following functions are available: • Sampling ?[...]

PDS • User ’s Guide 45 4. Operation Setup Menu For all Horizontal “active area” fields, all units are measured in pixels: • H T ot a l — adjusts the total pixel count per line. This value cannot be adjusted if the input type is DVI / SDI . For all Ve r t i c a l “active area” fields, all unit are measured in lin es. • V T ot al ?[...]

46 PDS • User ’s Guide 4. Operation Setup Menu 11 . Press ESC to return to the Inpu t Menu . 12. Scroll to the Save Config line, and press SEL to save the configuration for the selected input. 13. Repeat the entire adjustment procedure fro m step 1 , for all remaining inputs whose “type” is analog — and be sure to save the input configura[...]

PDS • User ’s Guide 47 4. Operation Setup Menu pjmqb=`çäçê=_~ä~åÅÉ=jÉåì If the current input’s colorspace is set to SMPTE , the Color Balance Menu appears: Figure 4-16. Color Balance Menu (SMPTE sample) Please note: • Saturation is measured in percentage. ~ Adjustment range (Composite, S-V ideo, YP b P r , SDI): 0% to 150% (100% [...]

48 PDS • User ’s Guide 4. Operation Setup Menu ~ Adjustment range : OFF , ON ~ Default : OFF • Sync Slice — This function select s the syn c comparator threshold for RGsB (RGB with Sync on Green) or YP b P r analog component video sources. When PDS detects Macrovision copy protection on the incoming YP b P r NTSC/P AL video, the Sync Slice [...]

PDS • User ’s Guide 49 4. Operation Setup Menu If you save to another configuration file, the File Associatio n Menu is updated to associate the new file to the current input. For more informa tion about the File Association Menu , ref er to the “ F ile Association ” section on page 72. 3. Scroll down to Save File and press SEL . A confirma[...]

50 PDS • User ’s Guide 4. Operation Setup Menu oÉÅ~ää=`çåÑáÖ From the Input Menu , select Recall Config to restore a configuration file that was previously associated with the current input. Using th e Reca ll Config Menu shown in the following illustration, you can change from the current config uration file for the input to any saved[...]

PDS • User ’s Guide 51 4. Operation Setup Menu The value of File Number is set to the current configuration file for the input. Y ou can either delete this file, select another saved configuration file and de lete it, or press ESC to continue without deleting. 2. Select a file to delete. Th en, scroll down to Delete File and press SEL . A confi[...]

52 PDS • User ’s Guide 4. Operation Setup Menu lìíéìí=jÉåì From the Setup M enu , select Output to display th e Output Menu . Figure 4-24. Output Menu (sample) Following are descriptions of each Output Menu function: • Main • Preview Menu (PDS 902 On ly) j~áå Following are descriptions of each Output Menu function: • Output Form[...]

PDS • User ’s Guide 53 4. Operation Setup Menu • Ty p e — This function enables yo u to select a test pattern. A vailable choices are: • Raster Box — This function enables or disables the raster box on the output. ~ When turned ON , the system displays a one-p ixel border around the active output area. Note that the ra ster box includes[...]

54 PDS • User ’s Guide 4. Operation Setup Menu position in lines. Positioning is limite d to the overall maximum V Size “space”, and the image cannot be moved off screen. • Reset All — This function resets H and V Size to the currently selected output format resolution, and H and V Position to [0]. póåÅ=pÉííáåÖë From the Outpu[...]

PDS • User ’s Guide 55 4. Operation Setup Menu • If you make a change in the Output Menu , and attempt to exit the menu (by pressing ESC ) without saving changes, the system displays the following prompt: Figure 4-29. Save Output Config uration Prompt ~ Select Ye s ( SEL ) to save changes. ~ Select No ( ESC ) to continue operation wi thout sa[...]

56 PDS • User ’s Guide 4. Operation Setup Menu • Choose Preview to display on the preview monitor the “pend ing” source. • Choose Program to display on the preview monitor the same source that is on Program. lìíéìí=cçêã~í In the Preview Menu , the [output_format] field displays the format of the output, in the following form: H[...]

PDS • User ’s Guide 57 4. Operation Setup Menu • Mode enables or disables the test pattern generator . The values are ON and OFF . • Ty p e provides a list of the availabl e test patterns. The choices are: • Raster Box — This function enables or disables the raster box on the Preview output. ~ When turned ON , the system displays a one-[...]

58 PDS • User ’s Guide 4. Operation Setup Menu message like the one shown in the fol lowing illustration. Figure 4-34. Save Preview Configu ration Prompt (sample) • Press SEL to save your changes. • Press ESC to continue without saving your changes. If you do not save your changes, your settings will not be restored t he next time the syste[...]

PDS • User ’s Guide 59 4. Operation Setup Menu içÖç=jÉåì A logo is a full-screen video source that, when you transition to it, a ppears on top of all other sources. From the Setup Menu , select Logo to display the Lo go Menu , whi ch enables you select, save and delete up to three full-screen logos. Figure 4-35. Logo Menu (sample) Followi[...]

60 PDS • User ’s Guide 4. Operation Setup Menu rëÉê=mêÉÑÉêÉåÅÉ=jÉåì From the Setup Menu , select User Pre ference to display the User Preference Men u : Figure 4-36. User Preference Menu (sample) The following functions are available: • T rans T ime • Auto Acquire • Auto Input Cfg • Auto Input Save • Background • HDCP[...]

PDS • User ’s Guide 61 4. Operation Setup Menu Note that transition times are sp ecif ied for switch ing applications with Auto Acquire turned OFF . When Auto Acquire is ON , the transition time is greater , due to the additional time required to analyze the inpu t video timing. T r ansition values are listed belo w: • Adjustment ra nge : 0.0[...]

62 PDS • User ’s Guide 4. Operation Setup Menu • When the Auto Acquire mode is ALL ON , the PD S automati cally detects and acquires the input video type and resolution (in most cases), and limi ts menu selections to those applicable to the detected vide o type. • If you are an advanced user and you k now the exac t timing parameters for yo[...]

PDS • User ’s Guide 63 4. Operation Setup Menu ea`m The HDCP Submenu , shown in the following illustration, lets you set HDCP capability for inputs. For an introduction to HDCP , see “ A Word About HDCP ” on p ag e 5. The HDCP setting is either ON or OFF . Y ou can set this capability for the following inputs and outputs: • In 5 (DVI-I) ?[...]

64 PDS • User ’s Guide 4. Operation Setup Menu jÉåì=`çåíÉñí The Menu Contex t function determines the behavio r of certain menus when an Input or LOGO button is pressed. The following conditio ns apply: • When ON , regard less of the current menu, the Input Menu or Logo Menu will automatically be displayed when the associated button [...]

PDS • User ’s Guide 65 4. Operation Setup Menu póëíÉã=jÉåì From the Setup Menu , select System to display the System Menu , which enable s you to adjust VFD brightness, input configuratio ns, front panel lockout modes, Ethernet parameters and many other “system” related functions: Figure 4-38. System Menu (sample) The following sect[...]

66 PDS • User ’s Guide 4. Operation Setup Menu bíÜÉêåÉí From the System Menu , select Ethernet to display the Ethernet Menu : Figure 4-39. Ethernet Menu (sample) The following Ethernet fu nctions are available: • DHCP — DHCP can be turned OFF or ON . ~ When OFF , the Config Network field app ears, which enables you to manually enter [...]

PDS • User ’s Guide 67 4. Operation Setup Menu ~ Select Set Netmask to display the Netmask Menu , which enables you to set a netmask. The editing procedure is discussed below . Figure 4-42. Netmask Menu (sample) ~ Select Set Gateway to display the Gateway Menu , which enables you to set a gateway . The editing procedure is discussed below . Fig[...]

68 PDS • User ’s Guide 4. Operation Setup Menu • Remote Control — This function sets up the PDS for remote control. Figure 4-44. Remote Control Submenu (sample) For complete details, see “ Appendix B ” on p age 129. • IP — The IP line is an i nformation-only lin e that shows the current IP address in all modes (with DHCP on or off).[...]

PDS • User ’s Guide 69 4. Operation Setup Menu fåéìí=bafa From the System Menu , select Input EDID to display the Input EDID Menu , which enables you to update the preferred EDID (Extended Display Identification Data) resolution for the PDS. Figure 4-46. Input EDID Menu (sample) EDID is a VESA standard data format that cont ains information[...]

70 PDS • User ’s Guide 4. Operation Setup Menu If the programming is successful, the fo llowing message is displayed: Figure 4-48. Programming EDID Message 2 If the EDID programming failed, the following message wil l be displayed: Figure 4-49. EDID Programming Failed Message If this message persists, please contact customer service for technic[...]

PDS • User ’s Guide 71 4. Operation Setup Menu The following functions are available: • Input — select s the exact inputs that you wish to set: ALL (inputs 5 through 8 ), 5 (individually), 6 (individually), 7 (individually), or 8 (individuall y). • Equalization — The equalization adjustme nt range is from 0 (short cable equalization) to[...]

72 PDS • User ’s Guide 4. Operation Setup Menu 3. Press SEL . The confirmation message shown in the following illu stration appears: Figure 4-52. Executive Mode Confirmation Message 4. Press an input button or LOGO . The button will blink slow to indicate that the input is ready to be taken to Program. The input source signal auto matically goe[...]

PDS • User ’s Guide 73 4. Operation Setup Menu T o change a setting, scroll to a n input number and press SEL . Choose a new co nfigura tion file and press SEL again. The change takes effect the next time the input button is pressed. Refer to the “ About Input Conf iguration Files ” section on page 48 for additional information about setti [...]

74 PDS • User ’s Guide 4. Operation Setup Menu If you suspect a problem with the PDS, press SEL to run a series of internal diagnostic tests. The menu will report back “ PA S S ” or “ FA I L .” p~îÉ=póëíÉã=pí~íÉ From the System Menu , select Save Config to save all current “sys tem” settings so that they may be restored at[...]

PDS • User ’s Guide 75 4. Operation Setup Menu qÉÅÜ=pìééçêí=jÉåì From the Setup Menu , select T ech Support to display the T ech Support Menu : Figure 4-59. T ech Support Menu The T ech Support M e nu displays the follo wing information: • Ve r s i o n — displays the current version of installed operating fi rmware. This number [...]

76 PDS • User ’s Guide 4. Operation Setup Menu • The serial port is set to the following defau lt values: ~ Baud : 1 1520 0 ~ Parameters : N81 (No Parity , 8 Data Bits, 1 S top Bit) ~ Handshaking : OFF cáêãï~êÉ=réÖê~ÇÉ=jÉåì For details about upgrading firmware, see “ Upgradin g Firmware ” on page 95. Note When "Reset Al[...]

PDS • User ’s Guide 77 4. Operation Using Inputs rëáåÖ=fåéìíë This section provides background information and instructions for using in puts. The following topics are discussed: • Input Selection Rules • Flip-flop Mode • Using Auto Acquire • Using HDCP With PDS, the HDCP mode is essentially automatic. Provid ed that you connec[...]

78 PDS • User ’s Guide 4. Operation Using Inputs switch between unprotected sources an d “protected” HDCP sources (e.g., a Blu-Ray player) without r estriction. ” section on p age 79. cäáéJÑäçé=jçÇÉ Whenever you press T AKE to mix between inputs (including the LOGO ), the PDS automatically flip-flops inputs. T wo actions occur w[...]

PDS • User ’s Guide 79 4. Operation Using Inputs rëáåÖ=^ìíç=^ÅèìáêÉ Please note the following important points regarding the Auto Acquire mode: • If Auto Acquire is ON and a valid input is selected that does not have a saved Input Config file associated with it , the system attempts to acquire the source and save an Input Config [...]

80 PDS • User ’s Guide 4. Operation Using the Logo rëáåÖ=íÜÉ=içÖç A logo is a full-screen video source which, when transitioned to Program, a ppears on top of all other sources. The PD S can store up to three logos in non-volatile memory . The PDS enables you to transition to or from a full-scree n logo, in the same way that you trans[...]

PDS • User ’s Guide 81 4. Operation Using the Logo p~îáåÖ=~=içÖç  Use the following steps to capture and store a l ogo: 1. T o capture and store a full-screen logo, first select the input that you wish to store, and transition it to Program with a T AKE . 2. From the Setup M enu , select Logo to display the Logo Menu . Figure 4-65. Lo[...]

82 PDS • User ’s Guide 4. Operation Using the Logo 2. Press SEL and scroll to select a saved logo. Logos appear in this list only if thei r resolution matches the output resolu tion. 3. Press T AKE . The logo appe ars on Program and the LOGO Setup Menu displays the logo number in brackets, as shown in the following illu stration: Figure 4-67. L[...]

PDS • User ’s Guide 83 4. Operation Using F reeze rëáåÖ=cêÉÉòÉ Y ou can use the FRZ (Fre eze) button to crea te a still image from a video image, typicall y for use as a full-scre en logo.  Use the following steps to freeze and un-freeze an input: 1. Select the desired input and transition it to program with a T AKE . 2. Press FRZ t[...]

84 PDS • User ’s Guide 4. Operation Using Black ~ If the transition i s “ from ” black, the B LACK button automatically turns of f when the selected source is fully on Program. _ä~Åâ=^ìíç=q~âÉ=lå= When the “ Black Auto T ake ” function is ON in the User Preference Menu , you do not need to press T AKE to perform a transition to[...]

PDS • User ’s Guide 85 4. Operation Using Front-Panel Lockout rëáåÖ=cêçåíJm~åÉä=içÅâçìí The PDS includes two front-panel lockout modes: • Full lockout mode, which locks the front panel from all source selections • Executive mode, which locks a ll front p a nel selections except the n ine input buttons ( 1 through 8 and SDI [...]

86 PDS • User ’s Guide 4. Operation Using Front-Panel Lockout[...]

PDS • User ’s Guide 87 RK==drf=léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter provides connection, launch and operating instructions for the system’s web- based GUI, which enables you to perform all PDS setup and tr ansition functions, just like the system’s “phys i cal” front panel. The following topics are discu ssed: • G[...]

88 PDS • User ’s Guide 5. GUI Operations GUI Connection and Launch drf=`çååÉÅíáçå=~åÇ=i~ìåÅÜ  Use the following steps to connect a PC, laptop, or mobile device and launch th e GUI: 1. Ensure that your PC (or laptop) uses Windows® 7, Windows® 2000, or Windows XP . If using a mobile device, ensure that it uses one of the follo[...]

PDS • User ’s Guide 89 5. GUI Operations GUI Connection and Launch 9. When the PC establishes communications with the PDS, several web pages are downloaded into the PC, and the PDS Home Page appears: Figure 5-2. PDS Home Page 10. Click the Control Application GUI link to launch the GUI. The GUI Status Menu page appears, as shown below: Figure 5[...]

90 PDS • User ’s Guide 5. GUI Operations GUI Operations on a PC drf=léÉê~íáçåë=çå=~=m` The figure below illustra tes a sample GUI screen, as seen on a PC: Figure 5-4. PDS PC GUI Setup Menu Running the PDS GUI is virtually identical to runni ng the system from the physical front panel. The similarities are: • All control panel sectio[...]

PDS • User ’s Guide 91 5. GUI Operations GUI Operations on a Mobile Device drf=léÉê~íáçåë=çå=~=jçÄáäÉ=aÉîáÅÉ The figure below illustra tes a sample GUI screen, as seen on a mobile device. It has the same controls as those for a PC, described in “ GUI Operations on a PC ” on page 90. Figure 5-5. PDS Cell-Phone GU I Setup [...]

92 PDS • User ’s Guide 5. GUI Operations Multiple Unit Control UI jìäíáéäÉ=råáí=`çåíêçä=rf The Multiple Un it Control User Interface (UI) allows an operator to control mu ltiple PDS units on the same network via a web browser , without installing a separate control application. After disco very and setup of the PDS units in the [...]

PDS • User ’s Guide 93 5. GUI Operations Multiple Unit Control UI ^ÇÇáåÖ=råáíë=íç=íÜÉ=råáí=iáëí 1. Select the “Discover” tab (next to the “Edit” tab) in the upper right window of the PDS Multiple Unit Control UI. Th e PDS Discover Menu will appear . Figure 5-7. PDS Discover Menu 2. Press the “Discover” button in [...]

94 PDS • User ’s Guide 5. GUI Operations Multiple Unit Control UI `çåíêçääáåÖ=jìäíáéäÉ=map=råáíë Figure 5-9. Control Section of the PDS Multiple Unit Co ntrol UI The control section of the UI gives the operat or contro l over the multiple PDS units. Each PDS in the unit list is represented with a status window . This window[...]

PDS • User ’s Guide 95 SK==réÖê ~ÇáåÖ=c áê ã ï ~ê É få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructions for upgrading PDS system fi rmware. The following topics are discussed: • Firmware Upgrade Overview • Hardware Requirements • Firmware Requirements • Downloadin g Fi rmware via FT P o r Web Site • Upgr[...]

96 PDS • User ’s Guide 6. Upgrading Firmware Firmware Upgrade Overview cáêãï~êÉ=réÖê~ÇÉ=lîÉêîáÉï Firmware files for the PDS are loaded into the hardware at power-up. Th ese files are stored in the unit’s onboard flash memory . The PDS’s system firmware can be easily upgraded using the steps described in the sections th at [...]

PDS • User ’s Guide 97 6. Upgrading Firmware Downloading Firmware via FTP or Web Site açïåäç~ÇáåÖ=cáêãï~êÉ=îá~=cqm=çê=tÉÄ=páíÉ T wo different methods can be used to download PDS firmware: • Via FTP Site • Via We b Si t e sá~=cqm=páíÉ Barco Folsom's FTP site address is: ftp.folsom .com  T o download firmwa[...]

98 PDS • User ’s Guide 6. Upgrading Firmware Upgrading Firmware Using the USB Port 2. Ensure that your PC is connected to the internet. 3. On the web, navigate t o: http://www .barco.com 4. Navigate to the “PDS Series” home page: http://www .barco.com/en/prod uct s-solutions/ima ge-processing/ presentation-switchers/easy-to-use-digital-swit[...]

PDS • User ’s Guide 99 6. Upgrading Firmware Upgrading Firmware Using the USB Port Figure 6-1. Format Removable Disk Window 6. Then click Start . A message appears, warning th at data will be erased durin g the formatting process. ~ Click OK to continue. ~ Click Cancel to halt the pro cess. 7. If you click OK , a confirmation message appears af[...]

100 PDS • User ’s Guide 6. Upgrading Firmware Upgrading Firmware Usin g the Web Upgrade 3. Select USB Code Upgrade . The menu shown in the following illustration appears. Figure 6-3. USB Code Upgrade Menu 4. Scroll to the file you want to use, and press SEL . 5. Scroll to Upgrade and press SEL again. A progress message appea rs. When the file i[...]

PDS • User ’s Guide 101 6. Upgrading Firmware Upgrading Firmware Using the Web Upgrade 4. A message informs you if a new firmware version is available. Figure 6-5. Firmware Version-Upgrade Message 5. Press <SEL> to start the upgrade. A message will inform you to “Please wait...”. Figure 6-6. Upgrade Wait Message 6. After the upgrade i[...]

102 PDS • User ’s Guide 6. Upgrading Firmware Upgrading Firmware Usin g the Web Upgrade d. Make a note of the information on the IP line, which shows the current IP address in all modes (with DHCP on or off). 6. On your PC (or laptop), open up a web browser . 7. In the browser ’s address bar , enter the PDS’s IP address. Figure 6-8. Address[...]

PDS • User ’s Guide 103 6. Upgrading Firmware Upgrading Firmware Using the Web Upgrade 9. Click the Firmware Upgrade lin k to continue the upgrade process. The Select File page appears, as shown below: Figure 6-10. PDS Select File Page 10. Click the Browse button, and navigate to the fold er on your PC where you saved the latest version of code[...]

104 PDS • User ’s Guide 6. Upgrading Firmware Upgrading Firmware Usin g the Web Upgrade 13. When the procedure is complete, you have three op tions: ~ Click Home to return to th e PDS Home Page . ~ If a problem was encountered during the process, click View Log Fi le to display a text-based log of the upload proce dure. ~ If the upload was succ[...]

PDS • User ’s Guide 105 6. Upgrading Firmware Upgrading Firmware Using the Web Upgrade qêçìÄäÉëÜççíáåÖ=bíÜÉêåÉí=`çããìåáÅ~íáçå  Use the following steps to determine th e IP address of the PDS, and establish proper communications: 1. Power-up the PDS. 2. Note the PDS’s current IP address: a. From the Stat u s [...]

106 PDS • User ’s Guide 6. Upgrading Firmware Upgrading Firmware Usin g the Web Upgrade[...]

PDS • User ’s Guide 107 T K==mapJVMO=Pd=båÜ~åÅÉ ãÉ åíë få=qÜáë=`Ü~éíÉê This chapter provides information about the enhancements provided with th e PDS-902 3G . In addition, it describ es the new features available with firmware version 3.00 and higher , which is compatible with the entire PDS fami ly product line. F or inform[...]

108 PDS • User ’s Guide 7. PDS-902 3G Enhancements Overview of Changes lîÉêîáÉï=çÑ=`Ü~åÖÉë The following enhancemen ts are provided with the PDS-902 3G an d with firmware version 3.00 and higher , whi ch is compatible with the entire PDS fa mily produ ct line. • The rear panel adds an HD/SD/3G SDI output for Program mode. • Th[...]

PDS • User ’s Guide 109 7. PDS-902 3G Enhancements Front and Rear Panel Enhancements cêçåí=~åÇ=oÉ~ê=m~åÉä=båÜ~åÅÉãÉåíë This section discusses the new features of th e PDS-902 3G front and rear panels. mapJVMO=Pd=cêçåí=m~åÉä Figure 7-1. Front panel The front panel of the PDS-902 3G adds two buttons to support PIP func[...]

11 0 PDS • User ’ s Guide 7. PDS-902 3G Enhancements Executive Mode ~ In Full Screen Mode, press to free ze the current source on Program. The button lights solid. Press again to unfreeze the current source. The button light goes out. ~ If the output display mode is Matrix or PIP , press and hold the PIP button and press FRZ to enable or disabl[...]

PDS • User ’s Guide 111 7. PDS-902 3G Enhancements Output Display Modes Figure 7-3. Program and Preview background selections lìíéìí=aáëéä~ó=jçÇÉë Three output display modes are avai lable from the User Prefere nce menu: • Full Screen Mode • PIP Mode • Matrix Mode At any time, you can switch between the diff erent modes. Y o[...]

11 2 PDS • User ’ s Guide 7. PDS-902 3G Enhancements Output Display Modes display one or bo th PIPs on the Preview outpu t, and to transi tion one or bo th to Program. From a factory reset or coming from another output display mo de, the PIPs are placed in one of two predefined default position s, as shown in the following figure. Figure 7-4. D[...]

PDS • User ’s Guide 11 3 7. PDS-902 3G Enhancements Output Display Modes In Matrix Mode, the PIP Adjustment Menu is not available. pÉäÉÅíáåÖ=~=mfm=_~ÅâÖêçìåÇ On Program, the PIP background can be either a logo or a matte color (black, gray , or a custom color). In Preview , the PIP background can be a matte color (black, gray , [...]

11 4 PDS • User ’ s Guide 7. PDS-902 3G Enhancements Output Display Modes to come down. Press T AKE to transition the PIP off Program. qê~åëáíáçåáåÖ=~=mfm=íç=cìää=pÅêÉÉå In the PIP Adjustment Menu , you can select either PIP1 or PIP2 to go full screen. PIP1 has a higher Z-order than PIP2 . • If PIP1 goes to full screen, t[...]

PDS • User ’s Guide 11 5 7. PDS-902 3G Enhancements Input Sizing Adju stments 1. Press and hold a PIP button. Select an input source. The pend ed input source button blinks. 2. Press T AKE to transition to the selected source through black. A pended source overrides the source on Program. After you press TA K E , there are no pending sources. P[...]

11 6 PDS • User ’ s Guide 7. PDS-902 3G Enhancements Menu Changes vertical edges of the input video content may be lost. In the following figure , data is lost on the top and bottom edges. Figure 7-8. An image with 4:3 input aspect rati o zoomed to16:9 output aspect ratio • Str e tc h . The image is stretched to fill the screen. The origi nal[...]

PDS • User ’s Guide 11 7 7. PDS-902 3G Enhancements Menu Changes Y ou can sel ect two of the following opti ons , depending on the current output d isplay mode: • Preview . Use this option for full-screen output mode. • Program. Use this option for full-screen output mode. • PIP 1. Use this option for Matrix or PIP output modes. • PIP 2[...]

11 8 PDS • User ’ s Guide 7. PDS-902 3G Enhancements HDCP • When the output format is 3G , the setting is Level A or Level B . Level A is the default setting. • Level B is not supported for SMPTE 2K formats. T o support PIP functionality , the Output Main Menu does not include the Output Adjust feature. ea`m The PDS-902 3G , like earlier mo[...]

PDS • User ’s Guide 11 9 7. PDS-902 3G Enhancements Input and Output Specifications fåéìí=~åÇ=lìíéìí=péÉÅáÑáÅ~íáçåë This section describe s the input and output enhan cements provided by the PDS-902 3G . Unless noted here, the input an d output specifications are th e same as on previous PDS systems. fåéìí=péÉÅáÑ[...]

120 PDS • User ’s Guide 7. PDS-902 3G Enhancements Input and Output Specifications lìíéìí=péÉÅáÑáÅ~íáçåë The output specifications for the PDS-902 3G are similar to those of earlier models, with the following exceptions: • The PDS-902 3G adds a BNC output conn ector on Program. This connector outputs the following formats: ~ [...]

PDS • User ’s Guide 121 ^K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed techni cal specif ications for the PDS. The following topics are discussed: • Input Specifications • Output Specifica tions • Physical and Electr ical Specifications • Communications Specifications • Agency S pecification[...]

122 PDS • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Input Specifications fåéìí=péÉÅáÑáÅ~íáçåë= The table below lists PDS input specifications. lìíéìí=péÉÅáÑáÅ~íáçåë The table below lists PDS output specifications: T able A-1. PDS Input S p ecifications Parameter Det ail Specification Inputs 1 - 4 Connector HD[...]

PDS • User ’s Guide 123 ^K==péÉÅáÑáÅ~íáçåë Physical and Electrical Specifications mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íáçåë= The table below lists PDS physical and electrical specifications. `çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë= The table below lists PDS comm unications specifications. T abl[...]

124 PDS • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Agency Specifications ^ÖÉåÅó=péÉÅáÑáÅ~íáçåë= The table below lists PDS agency specifications. máåçìíë= The following topics are discu ssed in this section: • Analog 15-pin D Connector • DVI-I Connector • Ethernet Connector • Serial Connector ^å~äçÖ=NRJéá[...]

PDS • User ’s Guide 125 ^K==péÉÅáÑáÅ~íáçåë Pinouts asfJf=`çååÉÅíçê The figure below illustra tes the DVI-I connector: Figure A-2. DVI-I connector The table below lists DVI-I connector pinouts. Please note: • T .M.D.S = T ransition Minimi zed Differential Signal • DDC = Display Data Channel 7 Green return 15 DDC Clock 8B [...]

126 PDS • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below illustra tes the Ethernet connector: Figure A-3. Ethernet connector The table below lists Ethernet connector pinouts. C2 Analog Green Video C5 Analog Common Ground Return C3 Analog Blue Video T able A-8. Ethernet Connector Pinouts P[...]

PDS • User ’s Guide 127 ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=`çååÉÅíçê The figure below illustra tes the DB-9 Serial connector . Figure A-4. Serial connector The table below lists Serial connector pinout s. T able A-9. Serial Connector Pinouts Pin RS-232 Signal Description 1 CD Carrier Detect 2 TXD T ransmitted Data 3 RXD R[...]

128 PDS • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts[...]

PDS • User ’s Guide 129 _K==oÉãçíÉ=`çåíêçä få=qÜáë=^ééÉåÇáñ This appendix provides information regarding remote contro l protocol. The following topics are discussed: • Setting Up For The Encore or ScreenPRO-II Contro ller • Communicating with PDS • Command Protocol • Error Codes • PDS Command List • Remote Com[...]

130 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Setting Up For The Encore or ScreenPRO-II Control ler pÉííáåÖ=ré=cçê=qÜÉ=båÅçêÉ=çê=pÅêÉÉåmolJff=`çåíêçääÉê • The Barco Remote Control Submenu sets up the PDS for remo te control through a Barco Enco re or ScreenPRO-II Controller . Figure B-1. Remote Control [...]

PDS • User ’s Guide 131 _K==oÉãçíÉ=`çåíêçä Communicating with PDS 8. When the connection is established, a confir mation message appears. `çããìåáÅ~íáåÖ=ïáíÜ=map  Use the following steps to communicate with the PDS via T elnet: 1. Connect the PDS’s Ethernet port to an Ethernet switch, and connect the switch to your[...]

132 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Command Protocol `çãã~åÇ=mêçíçÅçä The PDS’s command protocol is compatible wit h GNU getopt parsing. Every parameter of the command has an option character associ ated with it. A <CR> carriage return ( ASCII 13 ) terminates the command.  Command example: ITYPE -i 2 -t [...]

PDS • User ’s Guide 133 _K==oÉãçíÉ=`çåíêçä Command Protocol • Parameters : -i(input): Input number , 1-8 -b(bright): 75.0%-125.0% • Query Format : IBRT i(input) -? • Query Respon se : IBRT i(input) b(bright) --min 75 --max 125 IBRT -e 0 < LF> </x4> Current Setting Query — The current settin g query option ( -? ) r[...]

134 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Error Codes bêêçê=`çÇÉë This section provides PDS error codes: bêêçê=`çÇÉëW==dÉåÉê~ä=c~áäìêÉë The table below lists general failure codes: bêêçê=`çÇÉëW==kç=bêêçê The table below lists the “no error” code: T able B-1. PDS General Error Codes Code De[...]

PDS • User ’s Guide 135 _K==oÉãçíÉ=`çåíêçä PDS Command List map=`çãã~åÇ=iáëí The table below lists PDS remote commands. Note The following commands are for the PDS-902 and PDS-901 units. For a PDS-701 unit, the input parameter range cannot include inputs 7 or 8. T able B-3. PDS Remote Commands Command Description Page Etherne[...]

136 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä PDS Command List ICSP Input Colorspace Adjust 146 IFILL Sets the input fill mode 165 IHA TV Input Horizontal Active Adjust 146 IHCROP Input Horizontal Crop 146 IHP AN Input Horizontal Pan 147 IHPOS Input Horizontal Position Adjust 147 IHTOT AL Input Horizontal T otal Adjust 147 IHUE Input Hu[...]

PDS • User ’s Guide 137 _K==oÉãçíÉ=`çåíêçä PDS Command List OSDI Sets the Output SDI Mode (3G Series only) 166 OSDIST A T Query only command for the prese nce of SDI output connector (3G Series only) 167 OSRC Select the input source for the preview output 155 OSYNC Output Sync T ype Adjust 156 OTPM Output T est Patt ern Mode 156 OTPT[...]

138 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä PDS Command List DIAGD Display the results of the last performed system diagnostic test 159 ENCOREIP Encore IP address 160 FPUPDA TE Request a front panel update 160 HDCPST A T Query only command for the input or output HDCP status 165 IST A T Query only command for the input status type and[...]

PDS • User ’s Guide 139 _K==oÉãçíÉ=`çåíêçä Remote Co mmands oÉãçíÉ=`çãã~åÇë This section lists PDS remote commands, in the following categories: • Ethernet Commands • Input Commands • Output Comma nds • System Commands • LOGO Commands bíÜÉêåÉí=`çãã~åÇë ae`m • Description : Enables/disables DHCP mod[...]

140 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands d^qbt^v • Description : Sets gateway to be us ed when DHCP i s OFF . • Command Format : GA TEW A Y -s (static addr) • Parameters : s static addr: format will be: xxx .xxx.xxx.xxx • Query Format : GA TEWA Y -? • Query Respon se : GA TEW A Y -a (active addr) -s (st at[...]

PDS • User ’s Guide 141 _K==oÉãçíÉ=`çåíêçä Remote Co mmands fåéìí=`çãã~åÇë _ihsfa • Description : Puts black into the program input. • Command Format : BLKVID -m (mode) • Parameters : -m (mode): 0 - off, 1 - on • Query Format : N/A • Query Respon se : N/A `_ibn • Description : Sets cable equalization. Command va[...]

142 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Parameters : -i (input): 5-6 (PDS-701) 5-8 (PDS-901 and PDS-9 02) -t (EDID type): 0 - analog, 1 - digital (Default: 1) • Query Format : EDIDTYPE -i(input) -? • Query Respon se : EDIDTYPE -i(input) -t (EDID type) --min 0 --max 1 • List Format : EDIDTYPE -i(input) •[...]

PDS • User ’s Guide 143 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • Command Format : IAR -i (input) -r (ratio) -c (custom ratio) • Parameters : -i (input): 1 - 9 -r (ratio): 1 - 1:1, 2 - 3:2, 3 - 4: 3, 4 - 5:4, 5 - 16:10, 6 - 16:9 -c (custom ratio): .75 - 3.0 • Query Format : IAR -i (input) -? • Query Respon se : IAR -i (input) -c [...]

144 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Parameters : -i (input):1 - 9 -m (mode): 0 - input not available, 1 - input available • Query Format : IA V AIL -i (input) -? • Query Respon se : IA V AIL -i (input) -m (mode) f_oq • Description : Input Brightness Adjust • Command Format : IBRT -i(input) -b (brigh[...]

PDS • User ’s Guide 145 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • Parameters : -i (input): 1 - 8 (5 - 8 only if itype is analog) -a (ADC): A/B (A:ADC A, B:ADC B) -p (phase): -16 - 15 (default: 0) • Query Format : ICPHO -i(input) -a(ADC) -? • Query Respon se : ICPHO -i(input) -a(ADC) -p(phase) --min -16 --max 15 f`ob`= • Descripti[...]

146 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Parameters : -i (input):1 - 9 -f (file): 1 - 64. If specified, updat e the File Associ ation menu to reflect the selected file number . If not s pecified, use the current file number from the ICREC query . • Query Format : N/A • Query Respon se : N/A f`pm • Descript[...]

PDS • User ’s Guide 147 _K==oÉãçíÉ=`çåíêçä Remote Co mmands fem^k= • Description : Input Horizontal Pan • Command Format : IHP AN -i (input) -p (pan) • Parameters : -i (input): 1 - 9 -p (pan): In pixels • Query Format : IHP AN -i (input) -? • Query Respon se : IHP AN -i (input) -p (p an ) --min (active min) -- max (active m[...]

148 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Query Respon se : IHUE -i (input) -h (hue) --min -90 --m ax 90 fj^m • Description: Maps the input file confi guration for the selected input. • Command Format: IMAP -i (input) -f (file) • Parameters: -i (input):1 - 9 -f (file): 1 - 64 • Query Format: IMAP -i (inpu[...]

PDS • User ’s Guide 149 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • Parameters : -i (input): 1 - 9 -f (format): form at stri ng, i.e. "800x60 0 @59.94" or -n (index): video format index (see --list) -s (status): 0 - valid, non- z ero - invalid • Query Format : IRES -i (input) -? • Query Respon se : IRES -i (input) -f (forma[...]

150 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands fpfwbopq • Description : Reset the input sizing parameters to defaul t values • Command Format : ISIZERST -i (input) • Parameters : -i (input): 1 - 6 and 9 (PDS-701); 1 - 9 (PDS-9 01/902) • Query Format : N/A • Query Respon se : N/A fpif`b= • Description : Input S[...]

PDS • User ’s Guide 151 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • Query Format : ISYNC -i (input) -? • Query Respon se : ISYNC -i (input) -s(sync) --min 0 --max 3 • List Format : ISYNC -i (input) --list • List Response : 0:"Auto" 1:"H/V" 2:"CSync" 3:"SOG" fqvmb • Description : Input T ype[...]

152 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands fs`olm= • Description : Input V ertical Crop • Command Format : IVCROP -i (inp ut) -h (height) • Parameters : -i(input): 1 - 9 -h(height): In lines • Query Format : IVCROP -i(input) -? • Query Respon se : IVCROP -i(input) -h(height) --min (pos min) -- max (pos max) [...]

PDS • User ’s Guide 153 _K==oÉãçíÉ=`çåíêçä Remote Co mmands -i (input):1 - 9 -m(mode): 0 - of f, 1 - on (Default: off) • Query Format : PCOMP -i (input) -? • Query Respon se : PCOMP -i (input) -m (mode) --min 0 -- max 1 q^hb • Description : T ake the in put current ly on previ ew onto pr ogram. • Command Format : T AKE • Pa[...]

154 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands lìíéìí=`çãã~åÇë _i^`h= • Description : Set the mixer to output black. • Command Format : BLACK -m (mode) • Parameters : -m (mode): 0 - off, 1 - on • Query Format : BLACK -? • Query Respon se : BLACK -m (mode) --min 0 --max 1 l^s^fi • Description : Query[...]

PDS • User ’s Guide 155 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • Parameters : -o output: 1 - DVI, 3 - Preview DVI (PDS-902 only) -m (mode): 0-off, 1-on • Query Format : ORBM -o (output) -? • Query Respon se : ORBM -o (output) -m (mode) --min 0 -- max 1 lobp= • Description : Outp ut Resolutio n • Command Format : ORES -o (outpu[...]

156 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Query Respon se : OSRC -s (source) • List Format : OSRC --list • List Response : 0:"Preview" 1:"Program" lpvk`= • Description : Outp ut Sync T ype Adjust. • Command Format : OSYNC -o (output) -s (sync) • Parameters : -o output: 1 - DVI, 2- An[...]

PDS • User ’s Guide 157 _K==oÉãçíÉ=`çåíêçä Remote Co mmands 3 - 100% Col Bars 4 - 16x16 Grid 5 - 32x32 Grid 6 - Burst 7 - 75% Col bars 8 - 50% Gray 9 - Gray S teps 1 10 - Gray S teps 2 11 - W h i t e 12 - Black 13 - Red 14 - Green 15 - Blue • Query Format: OTPT -o (output) -? • Query Respon se : OTPT -o (output) - t (type) --min [...]

158 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands póëíÉã=`çãã~åÇë ^rql^`n • Description : Auto Input Acquisition Mode • Command Format : AUTOACQ -m (mode) • Parameters : -m mode: 0-all off, 1-all on, 2-input (Default: all on) • Query Format : AUTO ACQ -? • Query Respon se : AUTOACQ -m (mode) --min 0 --ma[...]

PDS • User ’s Guide 159 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • List Format: BACKGND -o (output) --list • List Response: 1:"Black" 2:"Gray" 3:" Logo" (for program output only) 4:"Custom" _ihqo^k= • Description : Sets whether going to black is a direct transition or requires a T AKE. • Com[...]

160 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Query Format : N/A • Query Respon se : N/A bk`lobfm= • Description : Set Encore IP Address. • Command Format :ENCOREIP -s(static addr) • Parameters : -s(static addr):format is xxx.xxx.xxx.xxx • Query Format : ENCOREIP -? • Query Respon se : ENCOREIP -s(sta tic[...]

PDS • User ’s Guide 161 _K==oÉãçíÉ=`çåíêçä Remote Co mmands icbk • Description : Sets the mode for the selected log. When selected, the messages for that log will be written to flash every time interval specified in (L INT). • Command Format : LFEN -l (log) -m (mode) • Parameters : - l (log): 0-combined , 1-debug, 2-wa rning, 3[...]

162 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Parameters : -i (input): 1 - 9 -b: black on preview -l: logo on preview -a: A or B p ath of scaler input on preview • Query Format : PREVIEW -? • Query Respon se : PREVIEW -i(input) -k -b moldo^j= • Description : Query only command for the input and black button sta[...]

PDS • User ’s Guide 163 _K==oÉãçíÉ=`çåíêçä Remote Co mmands • Parameters : -b (baud): 0 - 9600, 1 - 38400, 2 - 57600, 3 - 1 15200 (default: 1 15200) -p (parity/etc): 0 - N81, 1 - E71, 2 - O71, 3 - E72, 4 - O72 (default: N81) -h (handshaking): 0 - off, 1 - on (default: off) • Query Format : SERIAL -? - (option letter) The SERIAL q[...]

164 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Remote Commands • Parameters : -b (brightness): 1 - 8 (default: 5) -f: Command from front panel • Query Format : VFDBRT -? • Query Respon se : VFDBRT -b (brightness) --min 1 -- max 16 ildl=`çãã~åÇë ildlabi= • Description : Delete the se lected logo file. • Command Format : LO[...]

PDS • User ’s Guide 165 _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 `çãã~åÇ=réÇ~íÉë=Ô=cáêãï~êÉ=oÉîáëáçå=PKMM This section describe s commands that have been added, and a command that has been removed, in Firmwa re Revision 3.00. oÉîáëáçå=PKMM=`çãã~åÇë The following commands ha ve[...]

166 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 (Default: Native) • Query Format: IFILL -i (input) -? • Query Respon se: IFILL -i (input) -m (fill mode) --min 1 -- max 3 • List Format: Each in put type has a different list of valid sa mple modes. IFILL -i (input) --l ist • List Response: [...]

PDS • User ’s Guide 167 _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 lpafpq^q • Description: Query only command for the pr ese nce of SDI output connector • Query Format: OSDIST A T -? • Query Respon se: OSDIST A T -s (SDI output count) lrqjlab • Description: Selects the Output Display Mode. (Matrix mode is o[...]

168 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 • Parameters: -p (pip): 1 - Pip 1, 2 - Pip 2 -m (mode): 0 - of f, 1 - on (Default: off) • Query Format: PIPFREEZE -p (pip) -? • Query Respon se: PIPFREEZE -p (pip) -m (mode) --min 0 --max 1 mfmcrii= • Description: PIP is set to full size of [...]

PDS • User ’s Guide 169 _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 • Query Format: PIPISEL -p (pip) -? • Query Response: PIPISEL -p (pip) -i (input) mfmob` • D escription: Recalls saved PIP co nfiguration fo r selected the selected PIP . The PIP configuration is pe nded for the specifi ed PIP . If AutoT ake i[...]

170 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 mfmrkfq • Description: Selects the Unit Mode to be used in the PIP menu for the PIP Size and Positi on adjustments. • Command Format: PIPUNIT - m (mode) • Parameters: -m (mode): 0 - percentage, 1 - pixels • Query Format: PIPUNIT -? • Query[...]

PDS • User ’s Guide 171 _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00 aÉéêÉÅ~íÉÇ=`çãã~åÇ The following command has been removed for firmware version 3.00: _ihqo^k[...]

172 PDS • User ’s Guide _K==oÉãçíÉ=`çåíêçä Command Updates — Firmware Revision 3.00[...]

PDS • User ’s Guide 173 `K==`çåí~Åí=fåÑçêã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are discu ssed in this Appendix: • Wa r r a n t y • Return Material Au thorization (RMA) • Contact Information[...]

174 PDS • User ’s Guide `K==`çåí~Åí=fåÑçêã~íáçå Warranty t~êê~åíó All video products are designed and tested to the highest quality standards and are backed by a full 3-year parts and labor warranty . W arranties are effectiv e upon delivery date to customer and are non-transferable. Barco warran ties are only valid to the or[...]

PDS • User ’s Guide 175 `K==`çåí~Åí=fåÑçêã~íáçå Contact Info rmation Barco N.V . Noordl aan 5 8520 Kuurne BELGIUM • T elephone: +32 56 .36.82.1 1 • Fax: +32 56.35.16.51 • Website: ww w .barco.com T echnical Support (USA) • T elephone: (866) 374-78 78 — 6 a.m. to 10 p.m. (PST), 7 days per week • E-mail: folsomsupport@ba[...]

176 PDS • User ’s Guide `K==`çåí~Åí=fåÑçêã~íáçå Contact Informat ion[...]

PDS • User ’ s Guide 177 fåÇÉ ñ kìãÉê áÅë 10/100BaseT . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1-1 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . 44 3-2 film pulldown . . . . . . . . . . . . . . . . . . . . . . . 47 ^ AC connector . . . . . . . . . . . . . . . . . . . . . . . . . 14 Acrobat usage . . . . .[...]

178 PDS • User ’s Guide Index off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Blinking (button) . . . . . . . . . . . . . . . . . . . . . 10, 27 BLK, using . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 BLKTRAN (command) . . . . . . . . . . . .[...]

PDS • User ’ s Guide 179 Index OSDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 OSDIST A T . . . . . . . . . . . . . . . . . . . . . . . 167 OSRC . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 OST A T . . . . . . . . . . . . . . . . . . . . . . . . . . 161 OSYNC . . . . . . . . . . . . . . . . . . . . . . . . . . 156 [...]

180 PDS • User ’s Guide Index b EDID format . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 type (7, 8) . . . . . . . . . . . . . . . . . . . . . . . . . 70 EDID (command) . . . . . . . . . . . . . . . . . . . . . . 141 EDIDTYPE (command) . . . . . . . . . . . . . . .[...]

PDS • User ’ s Guide 181 Index How hot is my system . . . . . . . . . . . . . . . . . . . 73 How to adjust sample phase . . . . . . . . . . . . . . . . 45 capture and store a LOGO . . . . . . . . . . . . 81 communicate with PDS . . . . . . . . . . . . . 13 1 connect and launch the GUI . . . . . . . . . . . 88 delete configuration files . . . . [...]

182 PDS • User ’s Guide Index i LCLR (command) . . . . . . . . . . . . . . . . . . . . . 160 LDMP (command) . . . . . . . . . . . . . . . . . . . . . 160 LFEN (command) . . . . . . . . . . . . . . . . . . . . . 161 LINT (command) . . . . . . . . . . . . . . . . . . . . . . 161 List, commands . . . . . . . . . . . . . . . . . . . . . . . 135 Lit[...]

PDS • User ’ s Guide 183 Index menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 preview . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 source selection . . . . . . . . . . . . . . . . . . . . 55 specifications . . . . . . . . . . . . . . . . . . . . . 122 test p attern . . . . . . . . . . . . . . . . . . . . . . . . 52 [...]

184 PDS • User ’s Guide Index o Raster Box . . . . . . . . . . . . . . . . . . . . . . . . . 53, 57 Ratio, aspect . . . . . . . . . . . . . . . . . . . . . . . . . . 42 RBACKGND command . . . . . . . . . . . . . . . . . 170 Rear panel connectors . . . . . . . . . . . . . . . . . . . 13 Rear panel, PDS-902 3G . . . . . . . . . . . . . . . . 1 10[...]

PDS • User ’ s Guide 185 Index selection . . . . . . . . . . . . . . . . . . . . . . . . . . 47 setup (Preview outputs) . . . . . . . . . . . . . . 57 slice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 SOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Sync Setup menu . . . . . . . . . . . . . . . . . . . . . . 57 [...]

186 PDS • User ’s Guide Index[...]