Dreamer Design Rebound GST manual

instruction manual committed to delivering quality and innovative products for you and your family Co ng ratu la ti on s on y ou r pu rc ha se o f a Dr ea me r De sig n Jo gg in g St ro ll er . sl i n g sh o t r ps ™ r e bo u n d gs t ™ d r e a m e r D E S I G N These instructions are for both our R ebound GST™ and Slingshot RPS ™ models. B[...]

Check to make sure you ha ve all the parts and necessary items needed to assemble the stroller . If you don't have something that is pictured please call our customer service line at 800.278.9626. introduction watch fingers when folding - folding mechanism could be a pinching hazard T urn the stroller over so the foot plate is down. Lift the s[...]

foam protector push button Make sure the foot br ake is in the unlocked, up , position. T o put the rear wheels on, push the button on the wheel while pushing the wheel axle into the stroller fr ame. R emove and discard the foam protectors on the wheel axles. be sure to discard the plastic bags from the wheels - they are a suffocation hazard for ch[...]

Starting at the bottom of the br ake pads, push the wheel up and in between the brak e pads. The quick release lever should be str aight out. While holding the lever , tighten the thumb nut until it is barely snug. The axle should not move side to side. R otate the tire upwards and find the flat sides on the round axle and slide all the way to the [...]

Make sure the seat str ap is snapped around the fr ame on both sides, by the basket. T o lock the hand brak e, pull the lever in and hold it while you push the button down. As you hold the button down, release the br ake lever . Y our stroller comes with two parking br akes: a foot brak e and a hand brake. The hand br ake, located on the handle, lo[...]

Y our canopy has multiple adjustments. It also has a side ventilation system, with flaps that roll up and velcro into place. T o bring the canopy to it's next position, flip the mesh portion under . Use the canopy at it's fully extended position during midday sun to provide your child with the most amount of shade. bubble sun canopy ™ W[...]

T o remove the sun canopy y ou will need a Phillips screwdriver to remove the screws from both sides of the canopy . Unsnap the canopy from the back and lift it out. Before washing the canopy , remove the fr ame. The canopy may be washed in cold water with mild detergent. Place the canopy back on the stroller to dry . bubble sun canopy ™ seat The[...]

T o wash the seat take out the firmness panels by unzipping the pouch at the top and underneath the seat. Do not remove the firmness panels when using your stroller. Removing the panels could cause suffocation. seat harness Undo both buckles from the padded center strap . Adjust the padded center str ap forward or backward to fit y our child. Adjus[...]

Y our stroller has many places to store y our stuff . There is a pocket located on the back of the seat, as well as pockets for keys or a cell phone on both sides. There is also a key leash and two w ater bottle holders located on the back of your stroller . storage height adjustable handle Another place for stor age is the basket under the seat. T[...]

shift tire to right shift tire to left If you get stuck in the r ain, your all weather cover will keep your child dry . Just drape the cover over your bubble canopy and seal the back velcro strips together . Next, velcro the str aps around the foot plate, which attach underneath between the brak e calipers and the frame. all weather cover folding I[...]

R eplace the br ake pads when the grooves become worn awa y . Check all bolts are tight and springs are secure for rear foot br ake. Check fabric seams and str aps for fr aying or tearing. K eep it out of the sun and in a dry place, when not in use, to prevent fading and mildew . Check the frame for loose rivets, cr acks and wear . Check to make su[...]