Lanner electronic 19" 1U Intel Pentium 4 Socket T Rackmount Network Security Platform manual

FW -7870 Series 19” 1U Intel Pentium 4 Socket T Rackmount Network Security Platform User’s Manual[...]

ii Copyright and Disclaimers © Copyright 2004 - Lanner Electronics Inc. All Rights Reserved The contents in this publication have been thoroughly checked and considered accurate. The publisher and manufacturer of this product, La nner Electronics, is not responsible for any violation of patents or other rights of third parties resulting from its u[...]

iii Safety Instruc tions The following information relates to the safety of installation and maintenance personnel. Read all instructions before attempting to unpack, insta ll or operate this equipm ent, especially before connecting the power adapter . Please keep the following in mind as you unpack and install this equipment:  Always follow bas[...]

iv Getting T echnical Assistance Should you encounter questions or probl ems w ith your FW -7870, Lanner Electronics is ready to assist you within the guidelines of our product support programs. First, check the electronic product documentation for assistance. If you still cannot find the solution to your problem, contact Lanner sales team with the[...]

v T able of Contents Copyright and Disclaimers ....................................................................................................ii T rademark Acknowledgments ...............................................................................................ii Radio Frequency Emissions Notice...........................................[...]

vi 3.5 Advanced Chipset Features ........................................................................ 24 3.6 Integrated Peripherals ................................................................................. 26 3.7 Power Management Setup .......................................................................... 30 3.8 PnP/PCI Configuratio[...]

1 C h a p t e r 1 Getting Started 1.1 Introduction Figure 1 – FW -7870 Outlook The FW -7870 is a 1U rackmount network security solution targeting the Enterprise market. The FW -7870 supports Socket T for Intel Pen tium 4 processor with 533/800 MHz FSB. It is designed with an Intel 915GV as its northbri dge and ICH6(i82801FB) as its southbridge.; [...]

2 1.2 T echnical Specifications Model Name FW-7870 SBC SBC MB-X76A CPU Socket T(LGA 775) for Intel Pentium 4 Processor Chipset Intel 915GV/Intel i82801 FB BIOS Award BIOS Memory Two 184 pin DDR DIMM Network interface 4 ports PCI-E by Marvell 8053 Gigabit Ethernet 4 ports PCI by Marvell 8001 Gigabit Ethernet SSD one CompactFlash TypeII Socket I/O In[...]

3 1.3 Packing Contents Carefully unpack your package and make sure that you have the following items.  FW -7870 Network security Platform  Console cable  1.8 meters long cross-over Ethernet cable  1.8 meters long straight-through Ethern et cable  Power cable  Screw Set  CPU Cooler * 1  Slid & Bracket Set If you find anyt[...]

4 1.4 MB-X76 System Board MB-X76 is the system board bundled with the FW -7870 Network security platform. The succeeding sections list all MB-X76 related jump er settings and connector pin a ssignments. 1.4.1 Board Layout Figure 3 – MB-X7 6 Jumpers and Connectors[...]

5 1.4.2 Jumper Settings and I/O Connector The onboard jumper settings and I/O connector of MB-X76 are custom-tailored to fit the FW -7870 functionality . Changing the jumper se ttings may result in system malfunction or unforeseen damages. Jumper Settings and I/O Connector Summary for MB-X76 JUMPER FUNCTION CMOS1 Clear CMOS Data PKMB1 PS/2 keyboard[...]

6 PSC1:24 Pin ATX Power Connector FAN1-3 : 3 Pin FAN Connector) Pin No. Description 1 Ground 2 +12V 3 FA N S t a t u s PKMB1: PS/2 Keyboard & Mouse Connector (2x4 Header 2.54mm ) Pin No. Description 1 KBCLK 2 Ground 3 NC 4 KBDA T A 5 NC 6 MSDA T A 7 MSCLK 8 VCC Pin No. Description Pin No. Description 1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15[...]

7 USBF1 ： USB Port #1 & #2 Connector 2x5 Pin 2.54mm Pin No. Descption Pin No. Description 1 USB_VCC 2 Grond 3 Key 4 USBD1+ 5 USBD0- 6 USBD1- 7 USBD0+ 8 Key 9 Ground 10 USB_VCC[...]

8 1.5 FW -7880 19” 1U Rackmount Firewall Mechanisms This section of the manual describes the mechan ical and device nomenclature of FW -7880. 1.5.1 Face Panel Figure 5 – FW -7870 Face Panel Face Panel LED S tatus and Behavior The following table lists and explains the beha vior of each LED on the FW -7870 front panel. LED Color St a t u s Descr[...]

9  Console Port: via the console port cable, this connector attaches FW -7870 to the host PC.  LCM & Keypad Please reference the Appendix B[...]

10 1.5.3 Rear View Figur e 6 – FW -7870 Rear V iew  Power Switch: Click the Power Switch , and the system will be power on. Faulty or impr oper use of the power adap tor may cause permanent damage to the power supply and the FW -7870. Plug the adap tor to an electrical wall outlet that matches its specifications. Power Switch[...]

C h a p t e r 2 FW-7870 Hardware Installation Guide 2.1 Hardware Installation Guide - Removing the Top Cover Step 1 : Unscrew Five screws from the system. Step 2 : Pull up the top cover Ste p 2 Ste p 1[...]

- CPU Installation Step 1: Rem ove the fan cover scre w (3 pcs) Step 2: To l oosen the therm al modul e screw (4 pcs) Step 3: Ope n socket lever by pushing lever down a nd away from socket[...]

Step 4: Open load plate, (DO NOT TO UCH SOC KET CONTAC TS) Step 5: Align notches with socket. Step 6: Close load plate. Pressing down on l oad plate, close and e ngage soc ket lever. Step 7: Place the therm al module onto the main b oard, lock o n the therm al module screw ( 4pcs), then loc k on the fan m odule screw.[...]

- System Memory - Figure 1: The DIMM slot has a notch, the DIMM memory module only fit in on e direction. - Figure 2: Align the memory notch to the module and push the memory into the DIMM socket Figure 1-1 Figure 1-2 Figure 2-1 Figure 2-2[...]

Installing Hard Disk Drive: Figure 1 : Put the Hard disk on the bracket, and screwing 4 screws. Figur e 1-1 F i g u r e 1 - 2 Figure 2: plug in the SATA power connector Figure 2 Figure 3: left side is power connector right side is SATA connector. Figure 3[...]

Figure 4 : Screwing the HDD bracket screws (4pcs). Figure 4 - Installing Compact Flash Card Figure 1 : Insert the compact flash card into the slot carefully as shown in the picture. Figure1 - Installing the Mini-PCI Card Figure 1: Insert the PCI expansion card into the mini-PCI slot at 45 degree. Figure 2: Pus h down the PCI expansion card and the [...]

Chapter 3 Award BIOS Setup 3.1 BIOS Setup A ward‘s ROM BIOS provides a built-in Setup prog ram that allows users to modify the basic system configuration and settings. The modified data will be stored in a battery-backed CMOS RAM so that this data will be retained even when the power is turned of f. In general, the information saved in the CMOS R[...]

<Esc> Main Menu - Quit and not save changes in to CMOS Status Page Setup Menu and Option Page Set up Menu - E xit curr ent page and return to Main Menu <+/PgUp> Increase the num eric value or make chang es <-/PgDn> Decrease the num eric value or make changes <F1> General help, only for Status Pa ge Setup Menu and Option Page[...]

3.2 Main Menu Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to s elect fro m several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu. Note that a brief description of each highlighted se[...]

 Set Supervisor password Use this menu to set Supervisor Passwords.  Set User password Use this menu to set User Passwords.  Save & Exit Setup Save CMOS value changes to CMOS and exit setup.  Exit Without Saving Abandon all CMOS value changes and ex it setup. 3.3 Standard CMOS Features The items in S tandard CMOS Setup Menu are divi[...]

detailed options IDE Channel 1 Master Options are in its sub menu Press <Enter> to enter the sub menu of detailed options IDE Channel 2 Master Options are in its sub menu Press <Enter> to enter the sub menu of detailed options Halt On All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/Key Select the situation in whic[...]

Cylinder Min = 0 Max = 65535 Set the num ber of cylinde rs for this hard disk . Head M in = 0 Max = 255 Set the number of read/write heads Precomp Mi n = 0 Max = 65535 **** W arning : Setting a value of 65535 means no hard disk Landing zone Min = 0 Max = 65535 **** Sector Min = 0 Max = 255 Num ber of sectors per trac k 3.4 Advanced BIOS Features Th[...]

CPU L3 Cach e: The option enables secondary cache mem ory . If enabled is selected, external cache memory is enabled. If disabled is se lected, external cache mem ory is disabled. Hyper - Threading T echnology : Allows you to enable or disable th e CPU Hyper -Threading T echnology feature. Enabled Enables CPU Hy per Threading Feature. Please note t[...]

Boot Up Sequence. MPS V ersion Contr ol For OS : An MP Platform interface standard that extends the performance of the existing PC/A T platform beyond the traditional sing le processor limit, while maintaining 100 % PC/A T binary compatibility . OS Select Fo r DRAM > 64MB : The default setting is “Non -OS2”. Set to “OS2” if the system me[...]

DRAM Date I ntegrity Mode : Select Non-ECC or ECC (error -correcting code ), according to the type of installed DRAM. System BIOS Cacheable : Selecting “Enabled” allows c aching of the system BIOS ROM at F0000h – FFFFFh, resulting in better system perfo rmance. However , if any program writes to this memory area, a system error m ay result. T[...]

3.6 Integrated Peripherals On-Chip (Primary/Secondary) PCI IDE : The int egrated periphe ral control ler contains an IDE interface with support for two IDE channe ls. Select Enabled t o activate each channel separately . On-Chip Serial A T A : The integrated peripheral controller contains an Serial A T A interface with support for two Serial A T A [...]

controller an d you have a USB keyboar d. Onboard LA N Contr ol : This setting controls the onboard LAN Controller. Enabled Enable Onboa rd H/W LAN functi on. Disabled Disable Onboard H/W L AN functio n. LPT/LCM Control : Use this optio n to enable and c onfigure or disable t he LPT/LCM po rt present on the evaluatio n board. Configuration option s[...]

SuperIO Device : Scroll to this item and press <Enter> to view the following screen: Power On Fu nction/ KB Power ON Password/ Hot Ke y Power O n : This item allows the user to power on the system by pressing hot-keys, o r typing in a password . Onboard Serial Port 1 / Po rt 2 : : Select an a ddress and correspo nding interrupt for the first [...]

IR T ransmission Delay : When UAR T Mode is selected in IrDA or ASKIR mode, it allows you to enable / disable UR2 Duplex Mode (Half) : This field is available when UAR T 2 M ode is set to either ASKIR or IrDA. This item enables you to determine the in frared function of the onboard infrared chip. The options are Full and Hal f (default). Full-duple[...]

3.7 Power Management Setup The Power Management Setup allows you to c onfigure you system to most ef fectively save energy while operating in a manner consistent with your own style of computer use. ACPI Function : This item allows you to enable or disable the Advanced Configuration and Power Management (ACPI). The settings are “Enabled” and ?[...]

Suspend Mode When enabled and after the set time of system inactivity , all d evices except the CPU will be shu t off. Configuration options: Disabled / 1 Min / 2 Min / 4 Min / 8 Min / 12 Mi n / 20 Min / 30 Min / 40 Min / 1 Hour . HDD Power Down When enabled and after th e set time of system inactivity , the hard disk drive will be powered down whi[...]

3.8 PnP/PCI Configuration This section describes configuring the PCI bus system. PCI, or P ersonal C omputer I nterconnect, is a system which allows I/O devi ces to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended [...]

3.9 PC Health Status Throttling Temperature Detect CPU temperature automatically . FAN 1 / FAN 2 / FAN 3 Detect Fan1 / FAN2 speed status automa tically .[...]

3.11 Load Optimized Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N) ? N 3.12 Supervisor/User Password Setting You can set either supervisor or user password, or both of then. The differences between are: Supervisor passwor d: can enter and change the optio[...]

ENTER PASSWORD: Type the password, up to eight characters in length, and press <Enter>. The password typed now will clear any previously entere d password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password.[...]

Pressing <Enter> on this item asks for confirmation: Save to CMOS and EXIT (Y/N)? Y Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after you turn your system off. The next time you boot your computer, the BIOS configures your system according to the Setup selections stored in CMO[...]

3.14 Exit Without Saving Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without st oring in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your com puter.[...]

Appendix A Power Supply Power Supply Specification AC Input Spec : VOL T AGE 90 ~ 264 V AC F UL L RANGE Output Specifications Output V oltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P] 5V 2 30.00 ± 5% ± 1% 50mV 12V 2 32.00 ± 5% ± 1% 120mV -5V 0.05 0.70 +5 ~ -10[...]

Appendix B Watchdog Timer Intr oduction Most systems need to be self-reliant. It's not usually possible to wait for someone to reboot them if there are so me component wrong. Some system designs, such as space probes, are simply not accessible to human operators. If t he system ever hangs, such systems are perm anently disabled. In other cases[...]

= 0 Disable = 1 Enable Bit 1-0 : Reserved CRF6 (Defaul t 0x00) Watch Dog Timer Time-out valu e. Writing a non-zer o value to th is register causes the counter toload the value to Watch Dog Counter and start coun ting down. If the Bit 7 and Bit 6 are set, anyMouse Interrupt or Keyboard Interrupt ev ent will also cause the reload of previou sly-loade[...]

A p p e n d i x C Console Redirection Console redirection allows you to maintain a system from a remote location by re-directing keyboard input and text output through the serial port. T his section will tell you how to use console redirection. 1. Please insert console cable between on FW -7870 and Remote Client System. 2. Setup BIOS in FW -7870. B[...]

A p p e n d i x D LCD Module and Key Pad For FW-7870 Purpose The purpose of this document is to provide insta llation inform ation for the LCD module and key pad installed in the FW -7870. Specification overview The LCD module is designed to provide real-time opera ting status and configuration information for the system. Y ou can reference the doc[...]

2.Read_KeyPad(); =>This Function get the KeyPad number if user pressed key . =>Direct write function to your program. Ex. int a; a=Read_KeyPad(); Return V alue: "1"=>The Upper Key "2"=>The Down Key "3"=>The Enter Key "4"=>The ESC Key 3.Show_Data(int Dp_T yp e1,int Dp_T ype2,int Dp_T ype3,int[...]

Terms and Conditions Date:2004. 07.08 W arranty Policy 1. All products are warranted a gainst defects in materials and workmanship f or a period of two years from the date of your purchase. 2. The buyer will bear the return freigh t charges for goods return ed for repair within the warran ty period; whereas manufacturer will bear the after se rvice[...]

RMA Service Request Form When requesting RMA service, please fill out this RMA Service Request Form . W ithout this form your RMA will be REJECTED!!! RMA No: Reasons to Return: □ Rep air(Please include failu re details) □ T esting Purpose Company: Contact Person: Phone No. Purchased Date: Fax No.: Applied Date: Return Shipping Address: Shipping[...]

PEXNSD01-040709 V ersion 1.0 Printed and published in T aiwan[...]