Logicube Omniclone Xi manual

Logicube Omniclone Xi™ User Manual I Logic ube Omniclon e Xi™ U ser’s Ma nual Logicube, Inc. Chatsworth, C A 91311 USA Phone: 818 700 8488 Fax: 818 700 8466 Version: 1.4 Date: 2/20/06[...]

TABLE OF C ONTENTS II Logicube Omniclone Xi™ User’s Manual Limitation of Liability and Warranty Information Logicube Disclaimer LOGICUBE IS N OT LI ABLE FOR A NY INCIDENTAL OR CONSEQU ENTI AL DAMAGES , INCLU DING, BUT NOT L IMITED T O PROPERTY DAMAG E, LOSS OF T IME OR DA T A FROM USE OF A LOGICU BE PRODUCT, OR ANY OTHER DA MAGES RESULTING FROM[...]

TABLE OF C ONTENTS Logicube Omniclone Xi™ User’s Manual III Table of C ontents LOGICUBE OMNICLONE XI™ U SER’S MANUAL ...... ...... ...... ...... ...... ...... I LIMIT A T ION OF LIABILITY A ND WARR ANTY INFORMAT ION ...... ...... .. II T ABLE OF CONTENTS....................................... ............. ............. ........... III 1. I[...]

TABLE OF C ONTENTS IV Logicube Omniclone Xi™ User’s Manual CHS Trans lation Modes ...... ...... ............ ...... ...... ...... ............ ...... .. 22 Security Ide ntification Nu m ber (SID ) Issues ... ... ... ... ... ... ... ... ... ... .. 22 Introd uct ion .......................................... .............. .......................[...]

TABLE OF C ONTENTS Logicube Omniclone Xi™ User’s Manual V 10. SOFTWA RE LOADING INSTRUCTIONS ............ ...... ............ ...... ..... 49 Loading So f tware Us ing the Co m pact Flas h ... ... ... ... ... ... ... ... ... ... . 49 Loa ding So f tware Thro ugh the Para ll el Port ... ... ... ... ... ... ... ... ... ... .. 50 Ho st PC prep ara[...]

[...]

Logi cube Om n i clone Xi ™ User’s Manual 1 1. Introduction to the Logicube Omni clone Xi™ Introduction Congratulations on your purch ase o f the Log ic ube Omnicl one X i™. You are now the proud owner of a state-of -the-art IDE /SATA di sk cloni ng de v ice. The Omnicl one X i™ is des i gned to be easy e nough to be used by a nov ice, ye[...]

INTRODUCTION 2 Logi cube Om n i clone Xi ™ User’s Manual Hundreds of different ty pes o f fil e systems ha v e been des i gned through the years. Onl y a hand f ul are in com m on use. A m ong those are FAT16, FAT32, and NTFS. FA T 16 – The fil e system us ed by DOS since v ersion 3.3. Thi s fil e sys tem can be a m axim um size o f 2GB, and [...]

INTRODUCTION Logicube Omniclone Xi™ User’s Manual 3 Using this guide Thi s user gu i de is m ade up o f 11 se cti ons: • Introdu ction • Getti ng S tarted ( Fast Start) • Cloning Modes and Settings • Om ni diagnost i cs™ • The Databas e/Barcode Option • Using the USB Port • Com pact Flash (CF) Drive • User-r eplaceabl e Hardwa[...]

INTRODUCTION 4 Logi cube Om n i clone Xi ™ User’s Manual • For the OCXi™ and OCX5i™: An AC power cord. • For the OCX2i™: An external 12VDC – 5.5A power supply. • A li ght bar that m ounts on the back of the unit. NO TE: The OCX2i™ doe s not come w i th a li ght ba r, though one can be purchased sepa rately . • A bootable CD-RO[...]

INTRODUCTION Logicube Omniclone Xi™ User’s Manual 5 Figure 1. Logicube Omniclone X i™[...]

INTRODUCTION 6 Logi cube Om n i clone Xi ™ User’s Manual Caution: A void drop ping the Log icube Omnic lone Xi™ or sub jecting i t to sha rp jolts. W hen in us e, place i t on a fl at surface. Caution: Keep the unit dry. If you need to cl ean your L ogic ube Omniclone X i™, us e a lightly dam p, lint f ree cloth. A v oid us ing soap or o th[...]

Logi cube Om n i clone Xi ™ User’s Manual 7 2. Getting Started (Fast St art) A pplyin g p ower t o the Logicube Omniclone Xi™ The Logicube Omnicl one X i™ is able to detect w hether an IDE (parallel ) or Seria l ATA ( SATA) drive is attached to the Master or Target pos iti ons. The unit is capable o f cl oning to/ f rom a SATA driv e to an [...]

GE TTING STARTED 8 Logi cube Om n i clone Xi ™ User’s Manual unit. In 2 – 3 seconds, the m ain “Sp l ash” screen appear s. Connecting Serial A T A (SATA) Drives 1. Locate the Master position on the top of your Omnicl one-Xi™ unit. You will notice thr ee connecti ons: One f or a fl at cab l e (the driv e data cable) and an other for a s [...]

GETTING S TA RTED Logi cube Om n i clone Xi ™ User’s Manual 9 Power and Reset butto ns The Logicube Om nicl one Xi™ i ncl udes one On/Off switch and one reset button. The pow er sw itch is a rocker sw i tc h that is located on the un i t’s power supply. The reset button is located on the back o f the unit underneath the Com pac t Fl ash Dri[...]

GE TTING STARTED 10 Logi cube Om n i clone Xi ™ User’s Manual 2. Press and hold the Set button, then release the Res et button. 3. Hold the Se t button until the unit boots to a screen that reads “Touchpad Cali bration. Pl eas e touch s quare w i th fi nger (1/5)”. 4. Look f or a square at the top of the screen. Touch the s quare when i t i[...]

GETTING S TA RTED Logi cube Om n i clone Xi ™ User’s Manual 11 If an error occurs during cloning, the St atus indic ator li ghts on the f ront panel w il l shut o ff . If one o f the drives caus ed the error to occur, the Stat us LED of the driv e will rem a i n li t. The AMBER light on the li ght bar li ghts up w hen the unit prompts the us er[...]

Logi cube Om n i clone Xi ™ User’s Manual 12 3. Cloning M odes a nd Setti ngs Main Me nu Scree n The m ain m enu screen appears w hen the Logicube Omnicl one Xi ™ is fi rst pow ered up. It d i splays the Titl e Screen an d the Ti me/Date . It also di splays two m enu options: A bo ut and Drives . Time/Date Settings The Omniclone Xi™ has a r[...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 13 To return to the m ai n m enu, sim ply press the “Back” icon at any tim e. Drives Sel ect the Dr iv e Inf o s creen by pressing the “ Drives ” icon. The un i t w i ll then pow er up all of the driv es that are a tt ached. Aft er 30 to 45 seconds , the unit w i ll sh[...]

CLONING MODES AND SETTINGS 14 Logi cube Om n i clone Xi ™ User’s Manual N O TE : Each time the Logicube Om niclone Xi™ i s rebooted the cl on ing mode and pre f erence s ettings are saved from the l ast cloni ng ses sion. Clever Clon e ™ M od e Thi s is the default mode. It clones ALL partiti ons on the Master driv e to the Target dr iv es [...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 15 unique copy m ethod 3 to us e f or each. The a v ailabl e m ethods are: Clever Clone™ – The default mode that lets the Omnicl one Xi™ determi ne the bes t (usually fastest) w ay to clone. It is denoted b y the light bu l b i con. It w ork s with all FAT16/FAT32 and NT[...]

CLONING MODES AND SETTINGS 16 Logi cube Om n i clone Xi ™ User’s Manual 4. On the right hand side you will see a designator for the pa rtiti on type. So m e ex am ples are : • 16 - FAT16 partition • 32 - FAT32 partition • NT - NTFS partition • Linux – Li nu x partition • ?? - unknow n partition 5. Touch the scroll i cons to place th[...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 17 Mir r or Simple partit ion mirror (no adjustments) None Do not co py this partitio n Mirror Cl on e ™ M od e Thi s m ode simply m a kes a bi t- by-bit mi rror copy o f the Master dri v e. It does not adjust any val ues. Thi s m ode i s onl y recomm ended w hen al l e l se[...]

CLONING MODES AND SETTINGS 18 Logi cube Om n i clone Xi ™ User’s Manual Master Manag er™ Mode (Optional) Thi s i s a spe ci al m ode that ass i sts i n the creation o f Master drives. I t l ets the us er choos e exactly one parti tion fro m the dr iv e in the Master pos i ti on (referred to henceforth as the Source drive) and cl one i t to th[...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 19 driv e. If you are rea dy to do thi s, choos e “Yes” to continue. 6. N O TE : W hen C l ever C l one™ scales down an NTFS partiti on, it can o nly scale it to 55% of the origi na l s i ze. 7. Bot h driv es will now po wer up. Af ter a f ew seconds the unit w i ll disp[...]

CLONING MODES AND SETTINGS 20 Logi cube Om n i clone Xi ™ User’s Manual Optional Preference Settings In addition the different cloning m odes, there are pref erence s etti ngs that can be used to adjus t the beha v i or of the cloni ng operation. Each o f these pref erence settings is access i ble through the Settings menu, w hich can v iewed a[...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 21 Speed The s peed setti ng pro v i des the option to set the speed at w hi ch an operati on w il l be per f ormed at. UDMA-5 - The sof tware per f orms a test procedure to determine the fastest setti ng that the drives will tol erate w hile s tream ing da ta from one to the [...]

CLONING MODES AND SETTINGS 22 Logi cube Om n i clone Xi ™ User’s Manual Geometry Thi s Mode sets the geome try ( C ylinder, H ead and S ector) translation us ed on the Target dr iv e. CHS inf ormati on is stored in the partiti on tabl e o f the hard drive and i s us ed by the BIOS to determi ne from w hi ch partition to boot. The correct setti [...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 23 f or security and authentication purpos es. The sam e SID nu m bers are f ound i n the s ystem registry in v ario us l ocati ons. W hen such driv es are cloned, the S ID nu m bers get copied w ithout change. If the Target dr iv e parti cipates in the s am e network as the M[...]

CLONING MODES AND SETTINGS 24 Logi cube Om n i clone Xi ™ User’s Manual if an error s uch as a bad driv e sector i s encountered. Skip - Ski p will a ll ow the Logicube Omniclone Xi™ to conti nue by stepping o v er the bad sector. Retry - Retry option w ill instruct the Logicube Omnicl one Xi™ to m ake se v eral a tt e m pts to read data f [...]

CLONING MODES AND SETTINGS Logi cube Om n i clone Xi ™ User’s Manual 25 the license key, follow thi s procedure to enter i t into your Logicube Omniclone Xi ™. Set Option Step-b y-S tep 1. Fr om anywhere in the m enu sys tem , press the Set button to enter the Settings m enu. 2. Touch the “General Preferences” icon located in the l ower l[...]

CLONING MODES AND SETTINGS 26 Logi cube Om n i clone Xi ™ User’s Manual 4. Exit the General Preferences screen by touching the Back icon. Thi s w ill take you bac k to the previ ous Set tings screen. Database Thi s setting i s cover ed i n Chapter 6: Th e Database/Barcode Op tion . Password Thi s setti ng i s us ed to set a password that restri[...]

Logi cube Om n i clone Xi ™ User’s Manual 27 5. Om niDiagnostics™ Introduction OmniDiagnostics™ is a po werf ul s et of features that aid i n the reco v ery an d repair o f driv es with bad or w eak data s ec tors, and in the s ecure eras ure of sensitiv e data. NO TE: Om niDi agnostics™ is an opti on that can be purchased f or your Om n [...]

OMNIDIAGNOSTICS™ 28 Logi cube Om n i clone Xi ™ User’s Manual • Fast (Default) – This i s the fastest. • Thorough – Thi s i s the m ost thorough. The Thorough operati on writes patterns to s om e sectors, w hich can cause data corruption. Use this setti ng onl y when data loss i s not an iss ue. Scan T arget Mode Step - by-S te p 1. F[...]

OMNIDIAGNOSTICS™ Logi cube Om n i clone Xi ™ User’s Manual 29 Repair T arget Mod e Step -by-Step 1. Fr om anywhere in the m enu sys tem , press the Set button to enter the Settings m enu. 2. Press the Cloni ng Mode icon that appears in the upper left- hand corner. A list of the a v ail ab l e cl oni ng modes appear s. 3. Press the “Repair?[...]

OMNIDIAGNOSTICS™ 30 Logi cube Om n i clone Xi ™ User’s Manual qui ckly wipi ng a driv e where rem oval o f sensiti ve i n f ormati on i s not an i ssue. WipeClean™ Settings The fo llow ing sett ings are u sed in configur ing W ipeC lean™ Target mode: Passes – Determ i nes how m any pass e s of all 0’s and al l 1’s are w ri tt en to [...]

OMNIDIAGNOSTICS™ Logi cube Om n i clone Xi ™ User’s Manual 31 8. A message w il l appear stati ng that portions of your Target dr iv e will be o v erwri tten. If you are prepared to continue, choos e “<Yes>”. If you w i sh to abort the operati on, choo se “< No>”. 9. If “<Yes>” is chosen, a second m ess age wil l[...]

Logi cube Om n i clone Xi ™ User’s Manual 32 6. T he Database/Barc ode Optio n Introduction The Logicube Database/Barcode Option gives your Omnicl one X i™ the abilit y to record v ital cloni ng inf ormati on and store i t on the Co m pact Fl ash (CF) driv e. Thi s information is stored in a form at that is easily read by most database progra[...]

THE DA TAB ASE/BARCODE OPTION Logi cube Om n i clone Xi ™ User’s Manual 33 Breakdown of Config.txt Inf or m ation collect ed by the Database opti on is go v erned by a “ Config List ”. This list contai ns all of the i tems that t he Database will rec ord. It also indicates w hether or not the Barcode Scanner i s used. Confi g lists can b e [...]

THE DA TAB ASE/BARCODE OPTION 34 Logi cube Om n i clone Xi ™ User’s Manual Scan2- UserEnteredName2 – Thi s i s the second line o f data coll ected b y the Barcode Scanner ( i .e. Batch Nu m ber). The entered na m e needs to be 18 characters or less. Scan3- UserEnteredName3 – Thi s is the third line of information collected by the Barcode Sc[...]

THE DA TAB ASE/BARCODE OPTION Logi cube Om n i clone Xi ™ User’s Manual 35 W e can see f rom this ex ample that a Master driv e w a s cl oned to a singl e Tar get driv e on May 18, 200 5. Mirror C lone mode w as used and the cloning s ession comp leted su cces sfully. NO TE: The database.csv file w ill continue to receiv e data f rom cloning se[...]

THE DA TAB ASE/BARCODE OPTION 36 Logi cube Om n i clone Xi ™ User’s Manual 11. W hen the cloning Session i s f inished, the unit w i l l write data to the database.csv file. If one or m ore “Scan” li nes are in the Con fi g L ist, then the Us er will be pro m pted to us e the Barcode Scanner. Fig 3. Barcod e Scan Prompt 12. W hen prompted, [...]

THE DA TAB ASE/BARCODE OPTION Logi cube Om n i clone Xi ™ User’s Manual 37 NO TE: Any s tandard printer can be used as l ong as it is able to pri nt fr om plain ASCII codes. Manage Data base – This allows the user to delete one or m ore Con fi g Lists f rom the Con fi g.txt fil e. Create Config – This sett ing a ll ows the user to create a [...]

THE DA TAB ASE/BARCODE OPTION 38 Logi cube Om n i clone Xi ™ User’s Manual Barcode Scanner The Barcode Scanner i s us ed to enter data that is not access i ble f rom i nside the Om n iclone- Xi™ unit. The data could incl ude thi ngs such as an Operat or Badge number or other data that is i n barcode f orm. As of this w ri ting, the Barcode sc[...]

THE DA TAB ASE/BARCODE OPTION Logi cube Om n i clone Xi ™ User’s Manual 39 NO TE: A hands-f ree stand is a v ail able fr om W asp Technologies. Beep Settings – These setti ngs change the v ol u m e lev el of the “beep” that the s canner e mi ts when i t successf ul l y reads a barcode. Enable Bar Code Sym biologies – This setti ng all o[...]

Logi cube Om n i clone Xi ™ User’s Manual 40 7. Using t he USB P ort Introduction The integral U SB port on your Log i cube Om n iclone Xi™ pro v ides connectivity of your CF d rive or Master hard driv e ( the unit’s Master drive) to an y USB-enabled PC. Both USB 1.1 and USB 2 .0 are supported. USB connectivity is avail able f or the Master[...]

USING THE USB PORT Logi cube Om n i clone Xi ™ User’s Manual 41 How to use under W indows (for Master Drive Ma nag ement) 1. Make sure a Master driv e i s properly attached to your Logi cube Om n i clone Xi™. 2. Make sure your PC is running W in98 or abo v e. 3. Connect the USB cable (provided) to a PC USB slot on one end. Do not at tach the [...]

USING THE USB PORT 42 Logi cube Om n i clone Xi ™ User’s Manual 1. Locate the USB icon in the system tray (ty pically at the bottom right of screen). 2. Click the icon once. 3. Wait f or W indows to bri ng up a m essage that it is safe to remo v e the de v ice. (Different v ersions of w indows w il l beha v e sl ightly d iff eren tly).[...]

Logi cube Om n i clone Xi ™ User’s Manual 43 8. Compact Flash (CF) Car d Introduction The Logicube Om nicl one Xi™ comes with a 64MB Com pact Flash (CF) Dr iv e that is i nserted in a CF slot at the back o f the un i t. This little drive i s us ed m ostly f or l oading software on the Lo gi cube Omnicl one Xi ™, but i t has other f unctions[...]

USING THE USB PORT 44 Logi cube Om n i clone Xi ™ User’s Manual Connecting the CF Drive to Windows via USB Thi s is neces sary to load new sof tware fil es to the CF Dr iv e. The CF drive is connected through W indow s v i a the Software Setup Screen. Connecting Th r ough t he S oftware Set up Me nu USB connectivity is avail ab l e f or the CF [...]

COMPACT FLASH (C F) CARD Logi cube Om n i clone Xi ™ User’s Manual 45 Logicube Omniclone Xi™, the un i t has to be properly "unmounted" from W indows. To do that: 1. Locate the USB icon in the system tray (ty pically at the bottom right of screen). 2. Click the icon once. 3. Wait f or W indows to bri ng up a m essage that it is safe[...]

Logi cube Om n i clone Xi ™ User’s Manual 46 9. Us er Repl acea ble Hardware Introduction Many o f the co m ponents that m ake up the Log icube Omniclone X i™ are des igned to be re m o v able by the us er. This includes driv e cab les, drive stati ons and ev en the power supply itself. Thi s i s benefi cial in a production s etti ng w here a[...]

USER REPLACEA BLE HARD W ARE Logi cube Om n i clone Xi ™ User’s Manual 47 Proper Han dling of Dr ive Cables UDMA Cables – W hen removing the cable f rom a driv e, be sure to pull on the w hit e tab that is attached to the head. D O NOT pul l on the cable itself as this w ill d imin ish cable life . Power ca bl es – Re m ove the cable fr om [...]

USER REPLACEA BLE HARD W ARE 48 Logi cube Om n i clone Xi ™ User’s Manual Power Supply The OCXi and OCX5i models hav e an inter nal power supply that can also be replaced by the user. W hen it is determi ned that the pow er supply needs to be repl aced, please f ollow the procedure below: Repl acem en t Power Suppl ies are a v a i l able from L[...]

Logi cube Om n i clone Xi ™ User’s Manual 49 10. S oftware Loadin g Instructions Logicube Omniclone Xi ™ Software Updating Pr ocedures New and im prov ed so f tware w i ll appear f rom time to tim e on our w eb s i te at www. logicube.com . It is possible to update the operati ng so f tware i n the fi eld by a user. Two com mon ways are av a [...]

SOFT W ARE LOADING INST RUC TIONS 50 Logi cube Om n i clone Xi ™ User’s Manual 2. Boot The Log icube Omn iclone Xi™ while holding dow n the Start/Stop button. The unit w i ll boot to the So ft w are Setup Men u. 3. Us e the Select button to Scro ll down to “Engage CF to U SB”. Pres s the Start/Stop button. 4. . The status li ghts should l[...]

SOFT W ARE LOADING INST RUC TIONS Logi cube Om n i clone Xi ™ User’s Manual 51 Note : W indows 2000 and NT that ha v e N TFS file sys tem s cannot be used s ince NTFS i s not accessibl e through D OS. The fil e systems that are com patible i ncl ude FAT16 and FAT32. One possibl e w orkaround f or thi s i s to con fi gure the b oot diskette to c[...]

Logi cube Om n i clone Xi ™ User’s Manual 52 11. Frequently As ked Q uestions and Answers FAQ’s Q. By co m par i so n my Logi cube Om n i clone Xi™ appears to be operating slow er than other units. A. Make sure that your un it is us i ng the latest software. V isit htt p://www.logicube.com/ and go to the s upport page to v iew the latest so[...]

FREQUENTLY ASKED QUESTIONS AND ANS W ERS Logi cube Om n i clone Xi ™ User’s Manual 53 Q : Can the Logicube Omniclone Xi™ clone partitions created with file s ystems such as UNIX, LINUX and HPFS? A : Yes, but res ult s are g uaranteed only if they are cloned between identi cal Master an d Target driv es. Ho wev er, partitions of so m e v ersio[...]

FREQUENTLY ASKED QUESTIONS AND ANS W ERS 54 Logi cube Om n i clone Xi ™ User’s Manual Q : How does the Logicube Omniclone X i™ handle Window s NT Security Identificati on (SID) dupl i cati on i ssues? A : T he Log icube Om niclone X i™ does duplicate the SI D. Becaus e of this, it i s recommende d that a SID changer be i nstalled on the Mas[...]

FREQUENTLY ASKED QUESTIONS AND ANS W ERS Logi cube Om n i clone Xi ™ User’s Manual 55 Q : Can the Logicube Omniclone Xi™ correctly c l one hard drives with dual boot con fi gurat i ons, ev en in conjunction w i th N TF S? A : Yes. The Logicube Omniclone Xi™ will clone a FAT16 f o l low ed by either an N TFS or another FAT16 part iti on cor [...]

FREQUENTLY ASKED QUESTIONS AND ANS W ERS 56 Logi cube Om n i clone Xi ™ User’s Manual Also che ck and make sure that the firs t part ition s elect ed for clon ing on the Master dri v e cons ists of a bootable operating s ystem . It is poss ible to select a data-only partition to be cloned. How ev er, if i t beco m es the fi rst partition on the[...]

FREQUENTLY ASKED QUESTIONS AND ANS W ERS Logi cube Om n i clone Xi ™ User’s Manual 57 Q : W hy do I ge t the error “Can’t fit data to Target” when cloning betw een drives of the s ame size? A : The driv es may be f ro m different m anu f acturers and the Target actually so mewha t smaller tha n the Mas ter. Als o, the Mas ter dri v e may [...]

Logi cube Om n i clone Xi ™ User’s Manual 58 12. R eference Glossary BIOS ( B a s ic I nput /O u t put S ystem ) Built-in so f tware on a m otherboard that contai ns the instructi ons required for a PC to boot, control the hard driv es, keyboard, monitor and serial comm un i cations, and perf orm other l ow lev el f uncti ons. CHS ( C ylinder, [...]

REFERENCE Logi cube Om n i clone Xi ™ User’s Manual 59 A m ethod o f checking f or errors i n data tr ansmitted from one d evice to another, e.g. from one h ard drive to anothe r. W ith CRC the s ending de vice appli es a 16- or 32-bit poly no mi al to a block o f data to be transmitted and then appen ds the res ult to the block. The rece iving[...]

REFERENCE 60 Logi cube Om n i clone Xi ™ User’s Manual 65,536 cl usters while FAT32 al lows f or enou gh cl us ters to s upport up to two terabyt es o f dat a . Geometry, Hard Drive Hard drive geo m etry is the set o f physi cal charact eristics that be l ongs to a partic ular driv e , s pecifica lly: • The number of platters and cyli nders ?[...]

REFERENCE Logi cube Om n i clone Xi ™ User’s Manual 61 Master/Single Drive, IDE The primary or controlli ng de v ice connected to an IDE i nterf ace. The second de v ice connected to an IDE i nterf ace i s call ed the Slave drive. W he ther a de v i ce is the Master or the Slave is determi ned by jum per settings on the devi ce, itself. Not to [...]

REFERENCE 62 Logi cube Om n i clone Xi ™ User’s Manual QWERT Y Ref ers to the arrangement o f the keys on a standard Engl ish computer keyboard. The na m e deriv es f rom the fi rst six characters located on the top row of the keyboard. RA M Disk RAM that has been confi gured to app ear to a com puter as a hard driv e. Fil es on a RAM disk can [...]

REFERENCE Logi cube Om n i clone Xi ™ User’s Manual 63 T ar get Drive, Logicube Omnicl one Xi™ The hard driv e to w hi ch the Logicube Om niclone Xi™ copies the con tents of the Master drive. The Target drive is co mm on l y the one connected ex ternally to the Logicube Om n i clone Xi™. T ra nsl ation Mode, CHS A way of logically represe[...]

Logi cube Om n i clone Xi ™ User’s Manual 64 13. Index Active Dir ectory , 22 Add Partition, 19 Alphanume r ic Key pad, 26, 37 bad sec tor , 20, 28 BIOS, 22, 49 , 51, 52 , 54, 57 , 59, 62 BIOS, Phoe nix , 22 BSD, 14 Button, B ACK, 12, 13, 2 8, 29 Button, R ese t, 9, 10 Button, SELECT , 13, 24, 4 4, 49, 5 0 Button, SET, 10, 18, 20, 24, 25 , 26, [...]

INDEX Logi cube Om n i clone Xi ™ User’s Manual 65 LB A 8.5, CH S Tran slation S etting, 22 LB A, CHS Tran slation Setting, 8, 22, 5 1, 55, 5 9, 62 LB A-1, CHS Tran slation Setting, 22, 5 5 LB A-2, CHS Tran slation Setting, 22, 5 5 License key , 24 Light Bar, I II, 2, 4, 10, 11 Light, Ambe r (Light B ar), 11 Light, E rr o r, 11 Light , Green (L[...]

REFERENCE 66 Logi cube Om n i clone Xi ™ User’s Manual Win 2 000, 2 Win 9 5/ 98, 2 Win 9 8, 2 Win dow s NT, 2 WipeClean  Target Mode, IV , 18, 29, 30, 31, 62[...]

INDEX Logi cube Om n i clone Xi ™ User’s Manual 67 NOTES[...]