Maxis P1355 manual

AXIS P1355 Network Camera User Manual[...]

About this document This manual is intended for administrators and users of AXIS P1355 Network Camera, and is applicable to rmware 5.60 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems ma[...]

Safety This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage [...]

AXIS P1355 Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Other Message Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS P1355 Network Camera T able of Contents Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS P1355 Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury . CAUTION Indicates a hazardous situation which, if not avoided,[...]

AXIS P1355 Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 8 9 10 12 11 13 14 15 16 1 Focus puller 2 Zoom puller 3 Internal microphone 4 LED indicator 5 SD card slot (microSD) 6 Audio in 7 Audio out 8 Network connector P oE 9 P ower LED 1 0 Network LED 7[...]

AXIS P1355 Network Camera Hardware Overview 1 1 Control button 12 I/O terminal block 13 Product number (P/N) and Serial number (S/N) 14 RS485/422 connector 15 P ower connector 16 Iris connector Connectors and Buttons For technical specications, see page 67 . Network Connector RJ45 Ethernet connector with P ower over Ethernet (P oE). NO NO NO TIC[...]

AXIS P1355 Network Camera Hardware Overview SD Card Slot NO NO NO TICE TICE TICE • Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card. • Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage [...]

AXIS P1355 Network Camera Hardware Overview Status LED Behavior for Focus Assistant Color Indication Green Focus Assistant is enabled The lens is optimally adjusted Amber The camera has been moved, or an object has been placed in front of the lens. Exit and restart the Focus Assistant. The lens is less optimally adjusted. Red The camera has been mo[...]

AXIS P1355 Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® • Chrome TM or Firefox ® with other o[...]

AXIS P1355 Network Camera Access the Product For more information, see NAT traversal (port mapping) for IPv4 on page 54 . See also AXIS Internet Dynamic DNS Service at www .axiscam.net For T echnical notes on this and other topics, visit the Axis Support web at www .axis.com/techsup Set the Root P assword To access the Axis product, you must set th[...]

AXIS P1355 Network Camera Access the Product Controls on the Live View P age Click the View size buttons to show the image in full size (right button) or to scale down the image to t the browser window (left button). Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how to congure s[...]

AXIS P1355 Network Camera Access the Product The Play button connects to the Axis product and starts playing a media stream. The Stop button stops the media stream. The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specied in the AMC Control P anel. Click the View Full Screen button and the vid[...]

AXIS P1355 Network Camera Access the Product Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls. User-dened buttons can also appear in the Control panel. See Controls on page 34 . To view a specic view area or preset position, select it from the Source list. The PTZ controls can be disabled under [...]

AXIS P1355 Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available stream pro[...]

AXIS P1355 Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control P[...]

AXIS P1355 Network Camera Media Streams Note • <ip>= IP address • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The Live View pag[...]

AXIS P1355 Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all setting[...]

AXIS P1355 Network Camera Set Up the Product 7. On the Focus page, click Fine-tune focus automatically and wait until automatic ne tuning is completed. 8. Click Enable iris . If the button is inactive the iris is already enabled. 9. If needed, make further adjustments under the Advanced tab . See the online help for more information. Focus Assis[...]

AXIS P1355 Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 2 1 . • Stream proles. See page 23 . • Camera settings. See page 23 . • View areas. See page 25 . • Overlay image. See page 26 . ?[...]

AXIS P1355 Network Camera Video and Audio • Compression . The compression level affects the image quality , bandwidth and le size of saved images; the lower the compression, the higher the image quality with higher bandwidth requirements and larger le sizes. • Mirror image . If required, the image can be mirrored. • Rotate image . If re[...]

AXIS P1355 Network Camera Video and Audio Stream Proles A stream prole is a set of predened stream settings including resolution, compression, frame rate and overlay settings. Stream proles can be used: • When setting up recording using action rules. See Events on page 4 1 . • When setting up continuous recording. See Continuous Rec[...]

AXIS P1355 Network Camera Video and Audio Exposure value - Use the Exposure value slider to adjust the overall brightness of the image. Exposure control - This setting is used to adapt to the amount of light used. Automatic is the default setting and can be used in most situations. The shutter speed is automatically set to produce optimum image qua[...]

AXIS P1355 Network Camera Video and Audio Use the Iris adjustment slider to set the preferred F-value. The scale represents the amount the iris is open. If set to 0, the iris is opened as much as possible. If set to 100, the iris is closed as much as possible. The actual F-value is shown below the slider . If automatic iris adjustment is enabled, t[...]

AXIS P1355 Network Camera Video and Audio Overlay Overlays are used to provide extra information, for example for forensic video analysis or during product installation and conguration. Overlays are superimposed over the video stream. An overlay text can display the current date and time, or a text string. When using a text string, modiers ca[...]

AXIS P1355 Network Camera Video and Audio 5. Click Save . To select the image to use as overlay: 1. Go to Video & Audio > Overlay Image . 2. Select the image to use from the Use overlay image list and click Save . To display the overlay image: 1. Go to Video & Audio > Video Stream and select the Image tab . 2. Under Overlay Settings ,[...]

AXIS P1355 Network Camera Video and Audio The Privacy Mask List ( Video & Audio > Privacy Mask ) shows all the masks that are currently congured in the Axis product and indicates if they are enabled. Y ou can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name. For more information, see t[...]

AXIS P1355 Network Camera Video and Audio • Simplex – Network Camera speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. T o transmit audio using the Live View page, the Talk and Microphone on buttons must both be active, see AMC Audio Controls on page 14 . • Simplex ?[...]

AXIS P1355 Network Camera Video and Audio Audio Output An external speaker can be connected to the Audio-out connector (a built-in amplier is required for this). The output can be connected to another amplier with speakers. A stereo connector must be used for the audio out. Congure the audio output settings under Video & Audio > Aud[...]

AXIS P1355 Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 23 . • Default Viewer for Browser . See page 3 1 . • Viewer Settings. See page 3[...]

AXIS P1355 Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to [...]

AXIS P1355 Network Camera PTZ (Pan T ilt Zoom) PTZ (Pan T ilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area or if a PTZ driver has been uploaded. For more information on view areas, see View Area on page 25 . For more information on how to upload a driver , see Install PTZ Driver on page 35[...]

AXIS P1355 Network Camera PTZ (Pan T ilt Zoom) When the focus window is set from the Preset P ositions page, it will be included in the settings for that preset. The focus window can be redened for the preset, but it cannot be deleted unless the preset is deleted. Guard T our A guard tour displays the video stream from different preset positions[...]

AXIS P1355 Network Camera PTZ (Pan T ilt Zoom) • Zoom control To disable specic controls, deselect the options under Enable/Disable controls . If using multiple view areas, deselecting a control will only disable the control in the selected view area. Note Disabling PTZ controls will not affect preset positions. For example, if the tilt contro[...]

AXIS P1355 Network Camera Detectors Detectors Camera T ampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, spray-painted or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering detection: 1. Go to Detectors > Camera T amper[...]

AXIS P1355 Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detection [...]

AXIS P1355 Network Camera Detectors Note • T o trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • T o avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high history [...]

AXIS P1355 Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, download[...]

AXIS P1355 Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 40[...]

AXIS P1355 Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule. Co[...]

AXIS P1355 Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 39 . • Detectors - Audio Detection – Trigger the rule when audio is detected. See Audio Detection on page 38 . [...]

AXIS P1355 Network Camera Events - System Ready – T rigger the rule when the product has been started and all services are running. This can for example be used to send a notication when the product restarts. • Time - Recurrence – T rigger the rule periodically . See Set Up Recurrences on page 45 . This can for example be used to upload an[...]

AXIS P1355 Network Camera Events Recipient T ypes The following recipients are available: Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses. FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Noticati[...]

AXIS P1355 Network Camera Events certicate can be validated using the certicates available in the Axis product. For information on how to upload certicates, see Certicates on page 50 . Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside of?[...]

AXIS P1355 Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 47 . • To set up action rules, see page 4 1 . • To access recordings, see Find Recordings on page 46 . • To play recordings, see Play Recording on page 4[...]

AXIS P1355 Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters. See also Find Recordings on page 46 . 3. Select the recording and click Play . The recording will be[...]

AXIS P1355 Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Select[...]

AXIS P1355 Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may acc[...]

AXIS P1355 Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection Policy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired proto[...]

AXIS P1355 Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security > Cert[...]

AXIS P1355 Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automa[...]

AXIS P1355 Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting power . 5. C[...]

AXIS P1355 Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver.mycompany.com[...]

AXIS P1355 Network Camera System Options Note • For NAT traversal to work, this must be supported by the router . The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NA T router , Network router , Internet Gateway , Broadband router , Broadband sharing device, or a software such as a ?[...]

AXIS P1355 Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups. AXIS Video MIB (Management Information Base) for video hardware can be used to monitor A[...]

AXIS P1355 Network Camera System Options Bonjour The Axis product includes support for Bonjour . Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol. Bonjour can be disabled under System Options > Network > Bonjour . Storage SD Card NO NO NO TICE TICE TICE To prev[...]

AXIS P1355 Network Camera System Options The Axis product can be congured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserted, the product will check if the SD card has the ext4 le system. If the card has a different le system, the card will automatically be formatted to [...]

AXIS P1355 Network Camera System Options P orts & Devices I/O P orts The Axis product provides one input port and one output port for connection of external devices. For information about how to connect external devices, see Connectors on page 7 1 . The I/O ports are congured under System Options > P orts & Devices > I/O P orts . T[...]

AXIS P1355 Network Camera System Options For information about rmware upgrade, see Upgrade the Firmware on page 62 . Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting on page 62 . Sy[...]

AXIS P1355 Network Camera System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. T o upload a le, go to System Options > Advanced > File Upload . Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where <user>[...]

AXIS P1355 Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The curre[...]

AXIS P1355 Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the p[...]

AXIS P1355 Network Camera Troubleshooting The product cannot be accessed from a browser Cannot log in When HTTPS is enabled, ensure that the correct protocol (HTTP or HTTPS) is used when attempting to log in. Y ou may need to manually type http or https in the browser’s address eld. If the password for the user root is lost, the product must b[...]

AXIS P1355 Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 72 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available. Check in the AMC Control P anel (H.264 tag) [...]

AXIS P1355 Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . To identify the source of the problem, check the System Log under System Options > Support > Logs & Report[...]

AXIS P1355 Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS P1355 Image sensor Progressive scan RGB CMOS 1/2.8” Lens Varifocal 2.8 - 8 mm, F1.2, P-iris, IR corrected, CS-mount Horizontal angle of view 109°-39° V ertical angle of view 58°-22° Diagonal angle of view 130°-44° R[...]

AXIS P1355 Network Camera T echnical Specifications Function/group Item Specications Audio streaming Two-way , full duplex Audio compression AAC LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s G.7 1 1 PCM 8 kHz 64 kbit/s G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s Congurable bit rate Audio input 3.5 mm jack for mic/line in, max 80 mVpp for microphone/max [...]

AXIS P1355 Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform, specications at www .axis.com AXIS Video Hosting System (A VHS) with One-Click Connection ONVIF Prole S, specication at www .on[...]

AXIS P1355 Network Camera T echnical Specifications Function/group Item Specications Casing Metal (zinc) Processor , memory 256 MB RAM , 128 MB Flash Battery backed-up real-time clock P ower 8-28 V DC or P ower over Ethernet (P oE) IEEE 80 2.3af/80 2.3at Type 1 Class 3, max. 7.1 W Connectors RJ45 1 0BASE-T/1 00BASE-TX P oE I/O: 4-pin 2.50 mm te[...]

AXIS P1355 Network Camera T echnical Specifications Connectors I/O Connector 4–pin terminal block For an example diagram, see Connection Diagrams on page 72 . Function Pin Notes Specications 0 V DC (-) 1 DC output 2 Can be used to power auxiliary equipment. Note: This pin can only be used as power out. 3.3 V DC Max load = 50 mA Digital Input [...]

AXIS P1355 Network Camera T echnical Specifications RS485/422 Connector Two 2-pin terminal blocks for RS485/RS422 serial interface. The serial port can be congured to support: • T wo-wire RS485 half duplex • Four-wire RS485 full duplex • T wo-wire RS422 simplex • Four-wire RS422 full duplex point to point communication R S 485/ 422 1 2 [...]

AXIS P1355 Network Camera T echnical Specifications The following factors are among the most important to consider: • High image resolution and/or lower compression levels result in images containing more data. Bandwidth affected. • Access by large numbers of Motion JPEG and/or unicast H.264 clients. Bandwidth affected. • Simultaneous viewin[...]

User Manual V er . M3.4 AXIS P1355 Network Camera Date: May 20 15 © Axis Communications AB, 2014 P art No. 58 165[...]