Maxplus Industries HTS 2100S+ manual

E109000257A USER’S MANUAL Digital Satellite Receiver HTS 2100S +[...]

1 1. Introduction 2 1.1 Overview 1.2 Main Features 2. Safety/Precautions 3 2.1 Safety 2.2 Precautions 3. Points to Check before Use 5 3.1 Accessories 4. Controls/Functions 6 4.1 Front Panel 4.2 Rear Panel 4.3 Remote controller 5. How to Connect 10 6. Operation 11 6.1 Getting Started 6.2 System Setting 6.3 Channels 6.4 Electronic Program Guide 6.5 G[...]

2 3 This satellite receiver is designed for the reception of free-to-air and encrypted channels. Depending on your location, enjoy the rich choice of up to 5,000 different channels broadcasting a large range of programs: culture, sports, cinema, news, events, etc. This receiver is assembled with highly qualified electronic parts. Introduction 1.1 O[...]

4 5 When installing the unit 2.2 Precautions Install the unit horizontally. An uneven installation may cause the unit to be damaged. Do not put heavy items such as a TV set on the unit. That may damage the unit. Do not leave the unit where the water drops or splashes. Do not put water holding items such as vases on the unit. Do not install the unit[...]

6 7 Controls/Functions 4.1 Front Panel 4.2 Rear Panel Power : Switches the receiver between ‘Standby’ and ‘Power ON’ modes. Standby/Power on Indications Lamp : Flashes red light in ‘Standby’ mode and shows no light in ‘Power ON’ mode. Indication Light : Flashes when a key on the Remote Control Unit (RCU) is pressed. - CH. / : To swi[...]

8 9 4.3 Remote controller 4.3 Remote controller POWER : To turn the receiver On/Off. MUTE : To turn the sound On/Off. Numeric Keys (0-9) : To enter numerical settings (such as channel numbers) directly. INFO : To show information about the current program. Press twice to show detail. PAUSE : To pause the video. Press again to resume the video. EPG [...]

10 11 Operation 6.1 Getting Started Turn on your TV and receiver. The pop-up menu for language selection will appear.<Figure 6-1> Select one language and press to proceed. After your receiver is powered on, proceed with installation as follows : 1) Menu Language Setting <Figure 6-1> How to Connect When Connecting the Receiver to a TV wi[...]

13 12 6.1 Getting Started 6.1 Getting Started Select the item that you want to edit, and set its parameters as desired. <Dish Setting> - LNB Power : Select among ON/OFF/13V/18V. - LNB Type : Select among Single/Universal/OCS. - LNB Freq : Set the frequency of the LNB oscillator. - 22KHz : When not AUTO, set the signal path from LNB or switch [...]

15 14 6.1 Getting Started Through this function, the receiver searches for all the available channels and saves them in memory. Auto Scan <Figure 6-4> To select more than one satellite, press the RED button when the selection bar is positioned on the satellite. Press on the names of the satellites that you want to scan under 'Satellite L[...]

17 16 Manual Scan <Figure 6-7> Select a transponder. To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC buttons. To add a new transponder, press the GREEN button. To delete a transponder, press the YELLOW button with the cursor next to the Frequency parameter. To search a transponder, set its different parameter[...]

19 18 Channel Information You can press the INFO button to display the information banner for a few seconds. If you then press the INFO button again, a detailed banner will be displayed. 5) Other Functions of the Remote Control Volume Control While watching a program, press or to control the volume. You can press the MUTE button to remove the sound[...]

20 21 6.2 System Setting This submenu allows you to set your local time, wake up time, wake up channel and sleep time. <Figure 6-11> - GMT Usage : Set this ON for the local time to be determined by adjusting the time difference with the GMT (Greenwich Meantime) according to your location. - Current Date : If GMT Usage is OFF, you can modify t[...]

23 22 This submenu allows you to set the menu language, OSD transparency and Information and Volume timeouts. <Figure 6-13> - Menu Language : Select the desired language for the menu. - Transparency : Set the OSD transparency of the menu. (1% ~ 100%) - Information Timeout : Select the display duration of the information banner. (1, 2, 3, 5 or[...]

25 24 This submenu allows you to restore the factory set values (useful when encountering problems after changing settings). <Figure 6-15> - Delete Radio Channels : Erase all radio channels in the database. - Delete Scramble Channels : Erase all scramble channels in the database. - Delete All Channels : Erase all channels. - Factory Set : Era[...]

27 26 6.3 Channels This submenu allows you to set up favorite groups of channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. The receiver supports 8 favorite groups. Press on ‘Set Favorites’. The list of groups will be displayed. <Figure 6-18> Press / and to choose a group. The following men[...]

29 28 This submenu allows you to lock channels to control access to them. Once a channel is locked, you will be asked to enter a password whenever you try to watch it. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. If you set ‘Lock Channe[...]

31 30 6) Delete Channels This submenu allows you to delete channels. You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list group by pressing the GROUP button. Note : Be careful! If you delete a channel, you will not be able to access it again until you rescan. Press on ‘Delete Cha[...]

33 32 <Figure 6-25> <Figure 6-26> This sub menu allows you to set the on/off time of your receiver. This submenu allows you to set on/off times of your receiver. To display the timer menu, press the RED button while in the guide menu. <Figure 6-26> Press to select a timer’s parameter. Press / to change the parameter. - Timer No [...]

35 34 6.5 Games Press the EXIT button to quit the game. <Figure 6-29> <Figure 6-30> Press on ‘Snake’. The following menu will be displayed. <Figure 6-31> You can choose a skill level using / . Press to start the game <Figure 6-28>, or press the EXIT button to return to the previous menu. Press / / / to move. Pass through[...]

37 36 <Figure 6-34> <Figure 6-35> You can access detailed information about the CAM using the / keys in the Main Menu to select ‘CI’ and pressing . <Figure 6-35> Proceed with further instructions displayed on the screen to check more detailed information depending on the CAM in use. Note : Further detailed information is not m[...]

39 38 Specifications IEC 169-24, female 950MHz ~ 2150MHz -65dBm ~ -25dBm 14/18V, max 400mA 22KHz Ver 1.0/1.1/1.2/USALS Compatible QPSK 2Msps ~ 45Msps Auto conversion 32bit processor (133MHz) 8Mbyte 2Mbyte 32Kbyte Main Proflie @Main Level up to 15M bits/s 720 X 576, 720 X 480 NTSC, PAL 4:3,16:9 Mono,Dual mono,Stereo,Joint Stereo 32, 44.1 and 48 KHz [...]