Panduit DPOE12U1X manual

DPoE ™ Power Patch Panel User’s Guide Part Numbers: DPOE24U1X, DPOE24U1XY, DPOE12U1X, DPOE12U1XY, DPOE24S1X, DPOE24S1XY Issue 2.2 Part Number: PN378A August 2006 © 2006 PANDUIT Corp. All Rights reserved www.panduit.com[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A i Safety Warning Always observe standard safety pre cautions during installation, operatio n and maintenance of this product. Read the install ation instructions before you co nnect the unit to its po wer source. This unit must be connected to earth gro und, do not b[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A ii TABLE OF CONTENTS Safety Wa rning ................................................................................................................. i WARRANTY .........................................................................................................[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A iii Refresh the Network ........................................................................................... 43 Administering E -mail Setti ngs ............................................................................. 43 Search for Specific Pa nel(s) or Po[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A iv Table 14: Pack age Content s ......................................................................................... 53 Table 15: PANDUIT Corp Contact Informatio n .............................................................. 54 Table 16: Color-Coded Wire Posit[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 5 OVERVIEW The DPoE ™ Power Patch Panel provides a reliable and co st -effective solution for Power o ver Ethernet (PoE) applications, complaint with th e IEEE 802.3af-2003 specifications. Each DPoE ™ Power Patch Panel allows centralized powe ring of up to 24 dev[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 6 A - a nd B -fee d (o ptio n a l) Po we r C onn ec t i on s Punc hdo w n c o nne c t io ns OUT m ana ge m e nt po rt a nd OUT N et w ork S t at u s L E D IN m a na ge m e nt port a nd IN Ne two r k Sta tus LED Figure 2: DPoE ™ Power Patch Panel (Rear View) Feature[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 7 DPoE ™ Power Patch Panel Feature Benefit IEEE 802.3af-2003 Compliant Many cu rrently available in-line PoE powering options are not st andards-based, thus requiring coordination betwe en each device’s power needs and the technical capabilities of the in-line po[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 8 DPoE ™ Power Patch Panel Feature Benefit Easier Installation By eliminating the need for separate midspan patch panels an d the associated need for patch cord, in a network-ready 1RU high package, The DPoE ™ Power Patch Panel is fast and easy to install. INSTAL[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 9 Item Quantity Notes Quick Installation Instructions 1 PANDUIT Part Number PN370 DPOE™ Installation Worksheet 1 PANDUIT Part Number PN377 Metric and English screws 12 Installation requires six screws. One bag of six metric screws (M6x1.0x16) and one bag of six Eng[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 10 IMPORTANT: The DPOE ™ Installation Worksheet sho u ld be used to record pertinent information when installing DPoE ™ Power Pat c h Panel(s), pa rticularly if the EM is monitoring the network. (See page 29, Provisioning the Panel, for more information on how th[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 11 From Network Grounding Requirements Network Connection 5. If the Element Manager is not being used to remotely manage the ne twork of DPoE ™ Power Patch Panels, skip to Connecting the Powered Device s below. Otherwise, using a standard patch cord (for example, P[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 12 8. Fan out all four twisted pairs in the spe cified wiring sequence (see colo r-coded wiring positions in Table 4: Color-Coded Wire Position s for 802.3af-2003 Compliant Devices and Table 5: Colo r-Coded Wire Positions for Alternate PoE Devices below). The colors [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 13 9. Lay conductors into the punchdown slots for the specified port using th e corre ct wiring seque nce. Cable jacket removal should be minimized to the extent possible. Conductor untwist shoul d be within ½” (12.7 mm) of termination. WARNING: NEVER TOUCH UNINSU[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 14 WARNING: The power supply conne ctions are polarized. The DPoE ™ Power Panel will not functi on if power is wired improperly. For Maximum power the overall length of the wire betwee n the power supply and the DPoE ™ Power Panel must not excee d 35 feet. NOTE: [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 15 Table 6: DPoE ™ Power Patch Panel Pow er Up Sequence Behavior as viewed from the back of the unit Behavior as viewed from the front of the unit Both network status LEDs will light amber for two seconds The panel status Light-E mitting Diode (LED) will light red [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 16 Table 7: Basic Troubleshooting Guide Problem Possible Causes and Solutions The panel status LED does not light when power is applied to the unit. 1. The power supply fuse may be blown. Check the fuse on the DPoE ™ Power Patch Panel power supply. 2. The power con[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 17 OPERATION LED Indicators The DPoE ™ Power Patch Panel displays system a nd port status throug h the use of LEDs o n the front and rear of each panel. There is one p anel status LE D on the front left of the panel, 24 in dividual port status LEDs above each port,[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 18 LED Color Port LED Status Description Status of Power Ports Red Solid The system has failed to determi ne the PD power requirements for thi s port. Perhaps this PD is not an 802.3af-2003 compliant or Ci sco legacy power device. It could also be a port configured f[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 19 ELEMENT MANAGER SOFTWARE The optional PANDUIT ® El ement Manager is u sed to remotely control, configure and monito r the DPoE ™ Power Patch Panels within the netwo rk. Once in stalled on a shared or dedicated Windows-ba sed Personal Computer (PC), the EM can b[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 20 Display Settings For XP Professional or Home Edition: Settings: 1024x768 or larger Color Quality: Medium (16-bit) or higher Advanced: Normal Size Fonts (96dpi) REQUIRED Appearance: Font Size Normal REQUIRED For Windows 2000: 1024x768x32K colors Small Fonts REQUIRE[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 21 For security purposes, the network op erator will th en be given the opportuni ty to restrict the Element Manager to the administrator UserName only (default) or whet her other users of this PC can access it. Once this selection is made, the installation proce ss [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 22 Panel, the PC must either be setup as a DHCP Server or the panel but be setup for a static IP address. If the PC is connected to the DPoE ™ Power Patch Panel through a n Ethernet network, the network must have a DHCP Server on it or the panel must be setup for a[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 23 Some of the screen sh ots in this section may look different on the PC running th e EM. The updated EM presents a slightly different look to the screen shot s. I n some cases, addition al features have been added (refer to the same sections in the DPoE™ 8 Port P[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 24 The Tree View of the Net work area provides a hierarch ical display of each patch panel within the net work using the configurable names assigne d by the network operator. Multiple patch p anels physically wire d into a single rack are grouped on the scree n under[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 25 By clicking on the Add button, the network op erat or can create new UserNames and Passwords for use the system. A free-form Description field is also available. Maintenance of UserNam es is done by first clicking an existing Username, then clicki ng on either the[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 26 NOTE: A user cannot delete a currently active UserNa me. Panel Discovery Once the EM is connected into the network, the Di scov er capability can be used to "find" the deployed DPoE ™ Power Patch Panels. (See page 21, Connecting the EM Host Computer to[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 27 The network operator can set the Discover ca pability to search a specifi c subnetwork for pane ls or search across a range of IP addresse s. The two leftmost buttons on this Discover Devices wi ndow are used to select which ty pe of Discover to i nitiate. By sele[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 28 IMPORTANT: The SNMP Community fields are case-sensitive and allow SNMP messages to be exchange d between the EM and the DPoE ™ Power Patch Panels. FOR SECURITY REASONS, THESE FIELD S SHOULD BE CHANGED FROM THEIR DEFAULTS. Once any subnetwork changes are e ntered[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 29 Whether a subnetwork search or an IP rang e search was cond ucted, the discovere d DPoE ™ Power Patch Panel information will be populate d in the Element Manager. TIP: In addition to the Discover capability, the Element Manager also support s a Refresh capabilit[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 30 5. The table contains th e MAC and IP address of the all of the panel s. The message log will include the MAC and IP address of the new ly discovered pane l(s). The MA C Address can now be used to associate the discovered panel wi th the information contained on t[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 31 The panel name, ra ck name, rack sp ace position, and contact name should be entered here as shown above. The Element Manage r will create a rack with that name, and any panel that has the same rack name will be g rouped under that rack. This screen also inclu des[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 32 8. Once all of the information is entered, click the Save button a nd this information will be saved to the panel and the graphic for the rack will be shown in the Element Mana ger Tree View of the Network area along with a graphical repr esentation of the panel w[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 33 Administering Port and Panel-level Information The PANDUI T ® Element Manager ma kes it easy to administer the deployed network of DPoE ™ Power Patch Panels. When a specific panel is sel ected in the Tree Level View of the Network on the system - level opening [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 34 Figure 5: Edit Panel Screen TIP: Prior to modifying any entries on this screen, click o n the Refresh button to retrieve the latest information stored in the specific pa nel. This screen will allow the network o perator to change the panel IP address, the panel at[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 35 panels wired in a si ngle rack will be displayed consis tent with the value in the Rack Space Position field. (See page 29, Provisioning the Panel , for mo re information.) Once these values are set in the EM, this informatio n will be transmitted and stored in th[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 36 Copy/Paste/Delete Panel Information The EM also provides a unique feature that will allows the network operator t o more efficiently configure the network by allowing all panel-level information to be copied from one panel to another. The Copy Pan el and Paste Pan[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 37 If the Refresh Data option is checked, the EM will retrieve the latest information from the selected panels and before prompting the network op erator to enter a file name and location whe re the information can be stored on the PC. After the panel-level info rmat[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 38 Too l ba r Po rt inf o rm a tio n fo r al l p or t s on t h e se l ect ed pan e l . Figure 6: View Al l Ports Screen − Edit Port Information Clicking any row on the port information section of this screen will bring up the configuration information for that indi[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 39 Too l B a r Me s s ag es lo gge d fo r thi s p o rt Cure nt po rt c o nfigur a t io n plus EDIT butt o n Figure 7: View Indi vidual Port Screen Clicking on the Edit button will bring up the screen to edit individual ports on a DPoE ™ Power Patch Panel.[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 40 If the network operator were si multaneously config uring multiple ports, the follo wing screen would instead appea r and any values not overwritten would be left unchanged. Administration Control - This setting {on/off} allows the network operator to control whet[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 41 View Entire Log The View Entire Log button on the tool b ar on the View Panel Screen can be u sed to perform this task. Viewing the m essage logs ca n also be activat ed from most point s within the EM using the button on the top tool bar. Me ss ag e Lo g ar ea To[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 42 The View Message Log area provides a sequ ential listing of all messages re ceived by the EM, displaying them in a first-in, first-out manne r. That is, the most recently received message s are listed at the top of the window and th e older mess ag es are pushed d[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 43 − Clear Log By clicking on the Clear Log button, the operator will be given the oppo rtunity to export the log before erasing the entire log. NOTE: Clearing the log will cl ear the entire message log in the EM. It cannot be used to selectively clear a p ortion o[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 44 NOTE: Before any e-mail messages can be se nt from the system, the SMTP Server and Source E-mail Address fields must be entered. The Source E-mail Address will be used as the "from" address on al l e-mails sent from the Element Manager. Once this informa[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 45 Once the e-mail addresses are entered into the syst em and a specific e-mail address is selected on th e left panel of the E-mail Settings , the right panel is u sed to select which messag e categories will be sent to that e-mail address. (Se e page 47, EM Log Mes[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 46 Ta bs Panel level searches can be conducted by any comb ination of: - MAC address, - Panel Name, - Rack Name, - Rack Space Location - Hardware Ve rsion, - IP Address, - Physical Location, - Power Supply Location, - Firmware Versi on.[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 47 Port level searches can be con ducted by any combina tion of: - Port Number, - PD Type, - Work Area Location - Administration Control, - Detection Status, - Power Priori ty, - Power Classificatio n, - Legacy Control. EM Log Messages The following types of messages[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 48 Message Category Priority Level Description Panel Agent – Cold Start Advisory The main software process (i.e., the panel agent) in a previously known panel is now up and running. The process likely re set itself New Panel Discovered Advisory The Discover capabil[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 49 If the Online indicator is not checked ( ), the EM assumes it is in the offline mod e and will not attempt t o connect to the deployed Patch P anel Network. Changes made within the EM will not be updated in the panels. When the power consumed on any given panel re[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 50 NOTE: An important feature of the DPoE™ Power Patch Panel is its ability to conti nue supplying Power over Ethernet duri ng firmware updates. All IE EE 802.3af and Cisco In-Line protocol le gacy powered d evices connected to the Panel will remain powered during [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 51 4. Enter the TFTP information in the EM screen and then click on the Begin Update button. 5. Observe the System status LED begins flashing red on the DPoE™ Power Patch Panel. See Table 12A: DPoE™ Power Patch Panel Firmware Update LED status for the LE D activi[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 52 System LED Color and activity Network LED Color and activity State Description Elapsed Time Red rapid Blink Image transfer and update in progress 5 - 7 minutes Red slow Blink CRC code 4 se conds Red Solid Image update complete END Green Slow Blink Green Blink Appl[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 53 APPENDIX 1 – DPOE24S1X AND DPOE24S1XY INSTALLATION The PANDUIT® DPoE ™ Shielded Po wer Patch Panel requires a direct connection to a n ominal 48VDC supply. An individual power supply may be purchased separately from PANDUIT Corp or other vendors. Installation[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 54 Item Quantity Notes Metric and English screws 13 In stallation requires six sc rews. One bag of six metric screws (M6x1.0x16), one bag of six English screws (12-24x1/2”), and an additional screw for the rea r shield are included. 8 inch grounding strap 1 Used to[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 55 IMPORTANT: The DPOE ™ Power Patch Panel Installation Worksheet should be used to reco rd pertinent information when installing DPoE ™ Power Patch Panel(s), particul arly if the PANDUIT ® Element Manager is monitoring the network. (See page 2 9, Provisioning t[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 56 4. Record the rack space p osition on the Installation Worksheet. 5. Prepare the shielded cables for termi nation using the figures appropriate for the type of ca ble used. Caution: Do not damage conductor s . To ensure the highest shielding effectiveness, cut 1.5[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 57 Table 17: Color-Coded Wire Positi ons for 802.3af-2003 Compliant Devices Pin Outs EIA/TIA 568A Pin Outs EIA/TIA 568B 5 WHITE/BLUE 5 WHITE/BLUE 4 BLUE 4 BLUE 1 WHITE/GREEN 1 WHITE/ORANGE 2 GREEN 2 ORANGE 3 WHITE/ORANGE 3 WHITE/GREEN 6 ORANGE 6 GREEN 7 WHITE/BROWN 7[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 58 From Network Networking The Panels (Optional) 8. If the Element Manage r is not being used to remotely manage the network of DPoE ™ Power Patch Panels, skip to Power Requirements . Otherwise, usi ng a standard patch cord (for example, PANDUIT part number UTPCH3 [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 59 Power Requirements 10. If the panel is being powered by an individual power supply, such as a PA NDUIT® DPoE ™ Power Patch Panel Power Supply (See page 8, Table 1: P ower Supplies Available from PANDUIT Corp for a list of available powering optio ns), skip to P[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 60 15. Attach the top and bottom rear shields t o the panel using the tabs on the shields. Be sure that the compliant conductive foa m on the shields is in contact with the copper tape applied to the cables. Close the shields together over the cables and secure with [...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 61 Powering Up the DPoE ™ Power Patch Panel 17. Apply power the panel. Once power is applied to the unit, the DPoE ™ Power P atch Panel will go through its power up sequence. The following table d escribes the behavior of the unit a s viewed from the front and th[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 62 TECHNICAL SPECIFICATIONS Dimensions: 24 port 1.72”H x 19.0”W x 5.08”D (43.7mm x 482.6mm x 129.0mm ) 1RU Input Voltage Range: 46VDC to 57 VDC Typical per port power output IEEE 802.3af-2003 compliant pow er, 16.1 watts/port (46V OUT DC @ 350mA) Maximum overal[...]

PANDUIT ® DPoE ™ Power Patch Panel User’s Guide Issue 2.2 Part Number: PN378A 63 GLOSSARY AWG American Wire Gauge DHCP Dynamic Host Configuration Protocol EM Element Manager IEEE Institute of Electrical and Electr onic Engineers IP Internet Protocol LED Light-Emitting Diode MAC Media Access Control MHz Megahertz NMS Network Management System o[...]