Southbend SB1052F TURN-X manual

Manual Inser t PHONE: (360) 734-1540 • www.southbendlathe.com M O D E L S B1052F TU R N-X ® 14" X 4 0" L A TH E w/ D R O Copyright © F ebruary, 2014 by South Bend Lathe Co. W AR N I NG: No por tion of this manual may be reproduced without written approval. #TS16271 Printed in T aiwan The Model SB1052F Lathe is the same machine as the [...]

Model SB1052F Page 1 of 3 Model SB1052F 14" x 30" Turn-X Lathe with Fagor DRO Product Dimensions Weight........................................................................................................................................................... 2116 lbs. Width (side-to-side) x Depth (front-to-back) x Height..................[...]

Model SB1052F Page 2 of 3 Main Specifications Operation Info Swing Over Bed.................................................................................................................................. 14.17 in. Distance Between Centers..............................................................................................................[...]

Model SB1052F Page 3 of 3 Construction Base.................................................................................................................................................... Cast Iron Headstock.......................................................................................................................................... [...]

© November , 2011 by South Bend Lathe Co. F or Machines Mfg. Since 5/11 14" TU R N-X ® T O O L R O O M L A TH E M O D E L S B103 9 14" X 4 0" M O D E L S B1052 14" X 3 0" O WN E R'S MAN UAL[...]

Customer Ser vice We stand behind our machines. If you have any service questions, parts requests or general questions about your purchase, feel free to contact us. South Bend Lathe Co. P.O. Box 2027 Bellingham, WA 98227 Phone: (360) 734-1540 Fax: (360) 676-1075 (International) Fax: (360) 734-1639 (USA Only) Email: sales@southbendlathe.com Updates [...]

T able of Contents INTRODUCT ION .................................................... 3 About This Machine ............................................. 3 Foreword ............................................................. 3 Capabilities ......................................................... 3 Features ........................................[...]

Configuration Examples ..................................... 50 Power Feed ......................................................... 51 Power Feed Controls .......................................... 52 Setting Power Feed Rate .................................... 53 End Gears ........................................................... 54 Standard E[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -3- I N TRODUCT ION Ab out T his Mac hine F oreword " The screw cutting engine lathe is the oldest and most important of machine tools and from it all other machine tools have been developed. It was the lathe that made possible the building of the steamboat, the locomotiv[...]

-4- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e I N TRODUCT ION General Identification L. Longitudinal Leadscrew M. Feed Rod N. Coolant Reservoir & Pump Access O. Carriage (see Page 6 for details) P. Safety Foot Brake Q. Chip Drawer R. Micrometer Stop S. Two-Speed Motor Switch T. Quick-Change Gearbox Controls (see [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -5- I N TRODUCT ION Refer to Figures 2–7 and the following descriptions to become familiar with the basic controls of this lathe. Master Power Switc h The rotary switch shown in Figure 2 toggles incoming power ON and OFF to the lathe controls. It also prevents the electrical[...]

-6- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e I N TRODUCT ION Control Panel H. Coolant Pump Switch: Controls the coolant pump motor. I. Power L ight: Illuminates when lathe controls are receiving power. J. ST O P Button: Stops all machine functions. Twist clockwise to reset. K. Jog Button: Starts forward spindle rotat[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -7- I N TRODUCT ION T ailstock Y . Quill Handwheel: Moves the quill toward or away from the spindle. Z. Graduated Scale: Indicates quill movement in increments of 0.001" with one full revolution equaling 0.200" of quill travel. AA. T ailstoc k Lock Lever: Secures the[...]

-8- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e I N TRODUCT ION Model Number S B1039 S B1052 Product Dimensions Weight 2420 lbs. 2094 lbs. Width (side-to-side)/Depth (front-to-back)/Height 80 3 ⁄ 4 " X 32 1 ⁄ 8 " X 54 3 ⁄ 8 " 70" X 32 1 ⁄ 8 " X 54 3 ⁄ 8 " Foot Print (Width/Depth) [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -9- I N TRODUCT ION Model Number S B1039 S B1052 Main Motor Type TEFC Induction Horsepower 5 HP at 3450 RPM, 2.5 HP at 1725 RPM Voltage 220V Phase 3-Phase Amps 14A at 3450 RPM, 10A at 1725 RPM Speed 3450/1725 RPM Cycle 60 Hz Power Transfer V-Belt & Gear Bearings Shielded &[...]

-10 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e I N TRODUCT ION Model Number S B1039 S B1052 Headstock Information Spindle Bore 1.653" Spindle Taper MT#5 Number of Spindle Speeds 16 Range of Spindle Speeds 50–2570 RPM Spindle Type D1-5 Camlock Spindle Bearings Tapered Roller T ailstoc k Information Tailstock Qu[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 1- I N TRODUCT ION Model Number S B1039 S B1052 Construction Headstock Cast Iron Headstock Gears Flame-Hardened Steel Bed Meehanite Castings with Precision Hardened-and-Ground Ways Stand Cast Iron Paint Urethane Other Country of Origin Taiwan (Some Components Made in USA &a[...]

-1 2 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S AF ET Y Underst anding Risks of Mac hiner y Operating all machinery and machining equipment can be dangerous or relatively safe depending on how it is installed and maintained, and the operator's experience, common sense, risk awareness, working conditions, and u[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 3 - S AF ET Y Entanglement: Loose clothing, gloves, neckties, jewelry or long hair may get caught in moving parts, causing entanglement, amputation, crushing, or strangulation. Reduce this risk by removing/securing these items so they cannot contact moving parts. Mental Ale[...]

-14 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S AF ET Y Additional Met al L athe Safety Clearing Chips. Metal chips can easily cut bare skin—even through a piece of cloth. Avoid clearing chips by hand or with a rag. Use a brush or vacuum to clear metal chips. Stopping Spindle by Hand. Stopping the spindle by putti[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 5 - S AF ET Y Additional Chuc k Safety Entanglement. Entanglement with a rotating chuck can lead to death, amputation, broken bones, or other serious injury. Never attempt to slow or stop the lathe chuck by hand, and always roll up long sleeves, tie back long hair, and remo[...]

-16 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION Preparation Over view T hings Y ou'll Need To complete the preparation process, you will need the following items: F or Lifting and Moving • Aforkliftorotherpowerliftingdevice rated for at least 25% more than the shipping we[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -17 - P R EP ARA TION Power Supply Requirements A vailability The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple motors, this is the amperage drawn by the largest motor or sum of all motors and electrical d[...]

-1 8 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION Extension Cords Grounding Requirements Improper connection of the equipment-grounding wire can result in a risk of electric shock. The wire with green insulation (with or without yellow stripes) is the equipment-grounding wire. If repair or replacement o[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 9 - P R EP ARA TION Unpac king This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360) 734-1540 for advice. You may need to file a freight claim, so save the containers and all packin[...]

-2 0 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION The unpainted surfaces are coated at the factory with a heavy-duty rust preventative that prevents corrosion during shipment and storage. The benefit of this rust preventative is that it works very well. The downside is that it can be time-consuming to [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -21- P R EP ARA TION Chil dren or unt raine d peop le may b e se riously injure d by t his machine . Install mach ine in an access rest ric ted locat ion . Space Allocation Consider the largest size of workpiece that will be processed through this machine and provide enough sp[...]

-22 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION L ifting & Moving Do not attempt to lift or move this lathe without using the proper lifting equipment (such as forklift or crane) or the necessary assistance from other people. Each piece of lifting equipment must be rated for at least 25% more than [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -2 3 - P R EP ARA TION 8. R aise the lathe a couple of inches and check the balance of the load. — If the load is not safely balanced, immediately lower the lathe and resolve the issue before attempting to lift it again. 9. Raise the lathe enough to clear the shipping pallet[...]

-2 4 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION Assembly With the exception of the handwheel handles, the lathe is shipped fully assembled. To install the handwheel handles, thread the large handle into the carriage handwheel and the small handle into the cross slide handwheel, as shown in Figure 20 .[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -2 5 - P R EP ARA TION In addition to the reservoirs, we also recommend that you lubricate all other points on the machine at this time. This can be accomplished by following the maintenance schedule on Page 64 . Note: If this lathe was shipped with oil in the reservoirs, do n[...]

-2 6 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION T est Run After all preparation steps have been completed, the machine and its safety features must be tested to ensure correct operation. If you discover a problem with the operation of the machine or its safety components, shut the machine down, discon[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 2 7- P R EP ARA TION 3. Clear away all tools and objects used during assembly, lubrication, and preparation. 4. Make sure that the chuck and jaws, if installed, are secure (refer to Chuck and Faceplate Mounting on Page 32 ). Note: If a chuck is not installed on the lathe, yo[...]

-2 8 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION 8. Turn the master power switch on the electrical cabinet to the ON position. 9. Reset the STOP button by twisting it clockwise until it pops out. The power lamp on the control panel should illuminate. 10. To ensure the carriage components do not unexpec[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -2 9 - P R EP ARA TION 15. Push the foot brake. The spindle should come to a quick stop. — If the brake pedal has no effect on the lathe, push the STOP button, and refer to Brake & Switch on Page 78 to make any required adjustments. 16. Move the spindle lever to the OFF [...]

-30 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P R EP ARA TION Spindle Break- In Before subjecting the lathe to full loads, it is essential to complete the spindle break-in process as described below. This will ensure the best results and maximum life of the precision components inside the lathe. The break-in procedu[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 31- OP E RA TION Operation Over view T o complete a typical operation, the operator does the following: 1. Puts on safety glasses, rolls up sleeves, removes jewelry, and secures any clothing, jewelry, or hair that could get entangled in moving parts. 2. Examines the workpiec[...]

- 32 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Chuc k & F aceplate Mounting This lathe ships with the 3-jaw chuck installed. This is a scroll-type chuck where all three jaws move in unison when the chuck key is used. The included 4-jaw chuck features independent jaws, which are used for square or un[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -33 - OP E RA TION 5. Incrementally tighten the camlocks in a criss-cross or star pattern to ensure that the chuck seats evenly against the spindle. 6. When the chuck is fully seated and all the camlocks are tight, verify that the cam line is between the two "V" mark[...]

-34 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Figure 33. Registration mark locations. Camlock Spindle 2-Piece Direct Mount Camlock Chuck Marks for Chuck Reassembly Chuck Halves Spindle & Chuck Registr ation Marks Registration Marks Lightly stamp registration marks across the mating seams of chuck co[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -35 - OP E RA TION Scroll Chuc k Clamping This scroll-type chuck has an internal scroll-gear that moves all jaws in unison when adjusted with the chuck key. This chuck will hold cylindrical parts on-center with the axis of spindle rotation and can be rotated at high speeds if [...]

-36 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Figure 36 . 4-jaw tightening sequence. 1 2 3 4 Workpiece Center P oint 5. Tighten each jaw in small increments. After you have adjusted the first jaw, continue tightening the remaining jaws in an opposing sequence, as shown by the sequential order in Figure [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 3 7- OP E RA TION T o mount a non-concentric workpiece to the faceplate: 1. DISCONNECT LATHE FROM POWER! 2. Protect the bedway with a piece of plywood. 3. With help from another person or a holding device to support the workpiece, position it onto the faceplate and clamp it [...]

-38 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Inst alling T ooling This tailstock uses a quill with an MT#5 taper that has a lock slot in the back of the bore that accepts tang arbors and drill bits (see Figures 40–41 for examples). Figure 40 . T ypes of t apered arbors and tooling. T ang Screw End So[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -39 - OP E RA TION Removing T ooling 1. Use a shop rag to hold the tool. 2. Rotate the quill handwheel counterclockwise until the tool is forced out of the quill. — If the tool does not come loose by retracting the quill, extend the quill and use a drift key in the slot show[...]

-4 0- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Aligning T ailstock to Spindle Centerline This is an essential adjustment that should be verified or performed each time the tailstock is used to turn concentric workpieces between centers or immediately after offsetting the tailstock when turning a taper. [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 41- OP E RA TION Note: If necessary in the following step, refer to Offsetting Tailstock on Page 39 for detailed instructions. 8. Use calipers to measure both ends of the workpiece. — If the test stock is thicker at the tailstock end, move the tailstock toward the front of[...]

- 42 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION L ive Centers A live center has bearings that allow the center tip and the workpiece to rotate together; it can be installed in the spindle and the tailstock quill for higher speeds. However, a live center typically does not provide the same level of rigidi[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 43- OP E RA TION 3. Use the quill handwheel to feed the quill out from the casting approximately 1". Note: Do not extend the quill more than 2" or stability and accuracy will be reduced. 4. Insert the center into the tailstock quill. 5. Seat the center firmly into [...]

-44 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION The steady rest supports long shafts and can be mounted anywhere along the length of the bedway. Familiarize yourself with the steady rest components shown in Figure 54 to better understand its operation. Steady Rest T o inst all and use the steady rest: 1. [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 45- OP E RA TION F ollow Rest The follow rest mounts to the saddle with two cap screws (see Figure 56 ). It is used on long, slender parts to prevent workpiece deflection from the pressure of the cutting tool during operation. Adjust the follow rest fingers in the same manne[...]

- 46- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION The four-way tool post is mounted on top of the compound rest and allows a maximum of four tools to be loaded simultaneously. Each tool can be quickly indexed to the workpiece by loosening the top handle, rotating the tool post to the desired position, then [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 4 7- OP E RA TION Aligning Cutting T ool with Spindle Centerline For most operations, the cutting tool tip should be aligned with the spindle centerline, as illustrated in Figure 61 . Figure 61. Cutting tool aligned with spindle centerline (viewed from tailstock). Cutting T [...]

- 48- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Micrometer Stop 3. Move the micrometer stop up to the carriage, use the graduated dial to fine tune the position, then retighten the cap screws loosened in Step 2 . 4. Verify that tooling will not make contact with the chuck, jaws, or other components. T ool[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 49 - OP E RA TION Manual F eed The handwheels shown in Figure 65 allow the operator to manually move the cutting tool. Carriage Handwheel The carriage handwheel moves the carriage left or right along the bed. It has a graduated dial with 0.01" increments, and one full r[...]

- 50 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Ope rating t he lathe at sp indle spee ds highe r than 350 R PM when t he high ( H ) gearb ox range is se lec ted could r esult in gear box damage . Always use spin dle spee ds of 350 RP M or lower whe n using the hi gh ( H ) gearb o x ran ge. Setting Spind[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 51 - OP E RA TION Setting Spindle Speed of 16 00 R P M 1. Make sure the spindle is completely stopped and the spindle lever is in the OFF (middle) position. 2. Turn the motor switch to the high (right) position. Note: The blue color of the motor switch high position correspo[...]

- 52 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Power F eed Controls Use Figures 70–71 and the following descriptions to become familiar with the locations and functions of the controls that you will use to set up the correct power feed for your operation. Note: Before using power feed, you may have to[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 53 - OP E RA TION Depe nding on t he combine d configur ation of the head stock feed dir ec tion lever and the apro n fe ed dire c tion knob , the ac tual di rec tio n of power f eed may be dif fer ent fro m t he printed in dicator s on the machi ne ! E. F eed Selection Leve[...]

-54 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION 3. The configuration string of characters to the right of the selected feed rate ( LCS8W ) displays the positions to set the feed controls for a feed rate of 0.18mm/rev. (see Figure 72 ). Note: In the next step, use the chuck key to rock the spindle back and[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 55 - OP E RA TION Alternate Configuration The alternate end gear configuration is used when cutting modular or diametral threads. The 57T end gear is positioned on the outside so that it meshes with the 44T transposing gear instead of the 56T gear, as illustrated in Figure [...]

- 56 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION The following subsections will describe how to use the threading controls and charts to set up the lathe for a threading operation. If you are unfamiliar with the process of cutting threads on a lathe, we strongly recommend that you read books, review indus[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 57- OP E RA TION Apron T hreading Controls The half nut lever engages the carriage with the leadscrew which moves the carriage and cutting tool, along the length of the workpiece for threading operations (see Figure 78 ). Import ant: Make sure the feed selection lever is in [...]

- 58 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Figure 82. Marks are selected on the dial for threading even TP I not divisible by 4. Non- Numbered P osition 2,6,10,14, 18,22,26, 30,54 TP I T hread Dial Char t Find the TPI (threads per inch) that you want to cut in the left column of the thread dial char[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 59 - OP E RA TION 1 ⁄ 4 or 3 ⁄ 4 F ractional TP I For TPI that have a 1 ⁄ 4 or 3 ⁄ 4 fraction, use position 1 on the thread dial (see Figure 85 ). 2 7 ⁄ 8 TP I The thread dial is not used for 2 7 ⁄ 8 or metric threading, or diametral and modular pitches (see Figu[...]

- 60- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e OP E RA TION Always use high quality coolant and follow the manufacturer's instructions for diluting. The quick reference table shown in Figure 89 can help you select the appropriate fluid. Refer to Coolant System Service on Page 71 for detailed instructions on how [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 6 1- A CCESSOR I ES Accessories This section includes the most common accessories available for your lathe, which may be available through your local South Bend Lathe Co. dealer. If you do not have a dealer in your area, please call us at (360) 734-1540 or email us at cs@sou[...]

- 62 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e A CC ESSORI ES SB129 8—S B L Bench Lathe Shop Clock SB129 9—S B L T oolroom L athe Shop Clock SB13 00—S B L L athe with Man These fine traditional shop clocks are constructed with a metal antique-finished frame. They are easy to read from a distance and measure 14[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 63- A CCESSOR I ES SB13 65—W ay Oil Engineered for the high pressure exerted on horizontal or vertical ways and slides. Protects against rust and corrosion. Ensures stick-free, smooth motion which maximizes finishes and extends the life of your machine Won't gum up! 1[...]

- 64- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e MAI NTE NAN C E Maintenance Sc hedule Cleaning & Protecting Regular cleaning is one of the most important steps in taking care of this lathe. We recommend that the cleaning routine be planned into the workflow schedule, so that adequate time is set aside to do the jo[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 65- MAI NTE NAN C E Once every year, or more often with heavy use, perform these service items. Keep track of when you last performed your annual service and when you’ll need to perform it again. Use this chart to keep track of the maintenance performed on your South Bend [...]

-6 6- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e MAI NTE NAN C E L ubrication Headstoc k Oil Type .. Mobil DTE Light or ISO 32 Equivalent Oil Amount ............................................ 7.4 Quarts Check/Add Frequency .................................... Daily Change Frequency ....................... Every 6 Mon[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 6 7- MAI NTE NAN C E Quic k- Change Gearb ox Oil Type ...... Mobil Vactra 2 or ISO 68 Equivalent Oil Amount .................................................. 1Quart Check/Add Frequency .................................... Daily Change Frequency .............................[...]

- 68- F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e MAI NTE NAN C E Place a catch pan under the apron drain plug shown in Figure 105 , loosen the fill plug, then use a 6mm hex wrench to remove the drain plug and empty the reservoir. Figure 105. Location of apron drain plug. Drain Plug Flush the reservoir by pouring a smal[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 69- MAI NTE NAN C E Ball Oilers & Oil Cup Oil Type .. Mobil DTE Light or ISO 32 Equivalent Oil Amount ................................ 1 or 2 Squirts/Fill Lubrication Frequency ................................... Daily This lathe has seven ball oilers and one oil cup tha[...]

-70 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e MAI NTE NAN C E End Gears Grease Type ............................................... NLGI#2 Frequency ................ Annually or When Changing The end gears, shown in Figure 110 , should always have a thin coat of heavy grease to minimize corrosion, noise, and wear. W[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -71- MAI NTE NAN C E Coolant System Ser vice The coolant system consists of a fluid tank, pump, and flexible nozzle. The pump pulls fluid from the tank and sends it to the valve, which controls the flow of coolant to the nozzle. As the fluid leaves the work area, it drains bac[...]

-72 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e MAI NTE NAN C E T o c hange the coolant: 1. Position the coolant nozzle over the back of the back splash so that it is pointing behind the lathe. 2. Place the 5-gallon bucket behind the lathe and under the coolant nozzle. If you are using the optional hose, connect it to[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -73 - MAI NTE NAN C E 9. Slide the tank partially into the base and re- connect the fluid hose. Tip: Leave one or more magnets at the bottom of the tank to collect metal chips and make cleanup easier next time. This will also help keep small metal chips out of the pump. 10. Re[...]

- 74 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S E RVI C E Cross Slide T ools Needed: Qty Hex Wrench 3mm ................................................. 1 Hex Wrench 5mm ................................................ 1 The cross slide backlash is adjusted by loosening all four cap screws shown in Figure 115 , th[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -75 - S E RVI C E Gib Adjustment The goal of adjusting the gib screws is to remove sloppiness or "play" from the ways without over- adjusting them to the point where they become stiff and difficult to move. In general, loose gibs cause poor finishes and tool chatter;[...]

-76 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S E RVI C E Figure 117 . Compound and cross slide gib adjustment screws. Compound Rest Gib Adjustment Screw (1 of 2) Cross Slide Gib Adjustment Screw (1 of 2) Note: Remove the thread dial body and the carriage lock clamp to access the saddle gib adjustment screw on the t[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -7 7- S E RVI C E Half Nut Adjustment The clamping pressure of the half nut is fully adjustable with a gib that can be loosened or tightened by two set screws. Use this procedure to adjust the half nut if it becomes loose from wear, or it is too tight for your preferences. A h[...]

-78 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S E RVI C E 3. Adjust the hex nuts on the motor mount bolts shown in Figure 124 , until there is approximately 3 ⁄ 4 " deflection of the V-belts when moderate pressure is applied midway between the pulleys. 4. Firmly tighten the hex nuts to secure the setting, the[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -79 - S E RVI C E 5. Remove the pedal stop shown in Figure 126 . 6. Move the brake band to the right one hole, and re-install the pedal stop, tightening the cap screw until it is just snug. Note: If installing a new brake band, install the cap screw so there is one hole to the[...]

-80 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S E RVI C E Leadscrew Shear Pin Replacement T ools Needed: Qty External Retaining Ring Pliers #1 ....................... 1 Magnet ................................................................... 1 Safety Goggles ....................................................... [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 81- S E RVI C E 6. Use the magnet to remove the shear pin head, then rotate the lathe spindle to line up the inner and outer bores, as shown in Figure 132 . Next, use the magnet to remove the other half of the broken shear pin when it becomes visible. Figure 132. Shear pin b[...]

- 82 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e S E RVI C E T ools Needed: Qty Hex Wrenches 6mm .............................................. 1 Hex Wrench 8mm ................................................. 1 Wrench 17mm ....................................................... 1 Dead Blow Hammer ...................[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -83 - S E RVI C E 5. Install all fasteners and lightly snug them in place. 6. Mount a dial indicator with a magnetic base to the top of the saddle to indicate alignment. 7. First test the peak of the two prisms of the gap insert that the saddle rides on, then test the flanks o[...]

-84 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e T ROU B LESHOO T I NG If you need replacement parts, or if you are unsure how to do any of the solutions given here, feel free to call us at (360) 734-1540. Symptom Possible Cause Possible Solution Machine does not start or a circuit breaker trips. 1. (First time operati[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -85 - T ROU B LESHOO T I NG Symptom Possible Cause Possible Solution Entire machine vibrates upon startup and while running. 1. Workpiece is unbalanced. 1. Re-install workpiece as centered with the spindle bore as possible. 2. Loose or damaged V-belt(s). 2. Re-tension/replace [...]

-86 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e T ROU B LESHOO T I NG Gear change levers will not shift into position. 1. Gears not aligned inside headstock. 1. Rotate spindle by hand with light pressure on the lever until gear falls into place. Carriage will not feed, or is hard to move. 1. Gears are not all engaged.[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 8 7- E LECT R ICA L Electrical Safety Instructions These pages are accurate at the time of printing. In the constant effort to improve, however, we may make changes to the electrical systems of future machines. Study this section carefully. If you see differences between you[...]

-88 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e E LECT R ICA L Correcting Phase Polarity W iring This sub-section is only provided for troubleshooting. If you discover during the test run that the lathe will not operate, or that the spindle runs backwards, the lathe may be wired out of phase. Without the proper test e[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -89 - E LECT R ICA L Component Location Inde x Figure 139. Component location index. W ork Lamp Page 95 Coolant Pump Motor Page 92 Spindle Switches (Behind Splash Guard) Page 94 Spindle Motor Page 92 Control Panel Page 94 Chuck Guard Safety Switch Page 95 End Gear Cover Safety[...]

-90 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e E LECT R ICA L Electrical Cabinet W iring AMP AB 193-T RELA Y CONT ACTOR Allen Bradley C094 00 1 3 5 7 L1 L2 L3 L4 2 T1 4 T2 6 T3 2 4 6 8 T1 T2 T3 T4 97 0.3 0.4 0.35 0.25 98 NC NO 95 96 CONT ACTOR Allen Bradley C094 00 1 3 5 7 L1 L2 L3 L4 2 4 6 8 T1 T2 T3 T4 AMP AB 193-T[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 91- E LECT R ICA L Figure 140. Electrical b ox. Electrical Bo x[...]

-92 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e E LECT R ICA L Spindle Motor C UT TI N G FL U I D P U M P MOTOR (44 0V) SPI N DLE MOTOR (44 0V) Ground W U1 V1 W1 V6 V2 U2 W6 U6 W2 V U Yl Gn Ground V2 U2 HI LOW W2 Gn Ground Ground 3 2 1 4 6 5 W1 W1 V1 V1 U1 Gn 3 2 1 4 6 5 W1 W1 V1 V1 U1 Gn U5 V5 W5 Ground L13 L11 HI HI[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -93 - E LECT R ICA L 2- Seed Motor Switch (Both Sides Shown) F ront View Rear View 6 S 4 1 3 T 2 R 5 R1 R1 T1 T1 S1 S1 LOW LOW LOW LOW LOW LOW HI HI HI HI HI HI 2- Speed Motor Switc h Figure 143. 2- Speed motor switch. 2- Speed Motor Switch T o Electrical Cabinet Page 90 T o S[...]

-94 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e E LECT R ICA L Control Panel W iring Headstock COMMON NC NO COMMON X A1 0 3 3 0 2 Coolant Pump Switch Jog Button Power Lamp Stop Button NC COMMON NC NO NO X1 X2 4 4 3 3 2 1 13 14 21 22 NC NC NO NO 3 4 4 4 5 5 7 7 6 6 X 2 A1 X 1 Ground 4 2 2 2 2 6 2 2 2 8 3 1 2 6 8 3 1 Sp[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -95 - E LECT R ICA L Additional Component W iring Figure 14 7 . Chuck Guard Safety switc h location. Chuck Guard Safety Switch Power Connection Ground Hot Hot Hot DISCON NECT SWI TC H (as recommended ) Ground Hot Hot Hot 220V A C 15-20 Plug (as recommended) L3 L2 L1 MASTER P O[...]

-96 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Headstoc k Cover 1 2 3 4 REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 1 PSB10390001 HEADSTOCK OIL FILL CAP 3 PSB10390003 HEADSTOCK COVER 2 PCAP29M CAP SCREW M6-1 X 40 4 PSB10390004 HEADSTOCK COVER GASKET[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 9 7- P ARTS Headstoc k Controls 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 44 41 42 43 40 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 6 30 28 52 49 9 30 28 53 54 20 21 9[...]

-98 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Headstoc k Controls Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 5 PSB10390005 SPINDLE SPEED SHIFT FORK 35 PSB10390035 SHIFT SHAFT 6 PRP06M ROLL PIN 5 X 24 36 PORP018 O-RING 17.8 X 2.4 P18 7 PSB10390007 RIGHT REAR SHIFT PIVOT ARM 37 PSB10390[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -99- P ARTS Headstoc k Internal Gears 65 66 67 69 70 71 72 73 74 75 76 77 78 79 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 38 69 68 68 38 83 103 38[...]

-10 0 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Headstoc k Internal Gears Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 38 PCAP01M CAP SCREW M6-1 X 16 92 PSB10390092 KEY 7 X 7 X 53 65 PSB10390065 SHAFT END CAP 93 PORP075 O-RING 74.6 X 5.7 P75 66 PORP055 O-RING 54.6 X 5.7 P55 94 PSB103900[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -10 1 - P ARTS Headstoc k T ransfer Gears 10 24 33 38 85 121 122 124 125 128 129 130 131 134 135 136 137 139 140 141 143 144 145 146 147 128 124 38 10 130 128 134 134 38 140 83 83 REF PAR T # DES CR IP TIO N REF PART # DES CRI PT ION 10 PCAP04M CAP SCREW M6-1 X 10 131 PSB10390[...]

-10 2 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Gearb o x Gears G1 G2 G3 G1 G1 G2 G2 G3 G3 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -10 3 - P ARTS Gearb o x Gears Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 201 PSB10120201 OUTBOARD SPLINED SHAFT (G1) 232 PSB10120232 GEAR 19T 202 PSB10120202 OIL SEAL 20 X 32 X 5 233 PSB10120233 GEAR 20T 203 PSB10390203 NEEDLE ROLLER BEARING TAF202820[...]

-10 4 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Gearb o x Controls 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -10 5 - P ARTS Gearb o x Controls Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 262 PSB10120262 GEARBOX COVER GASKET 302 PSB10120302 LEFT SHIFT SHAFT 263 PSB10120263 PARTITION SCREW 303 PORP018 O-RING 17.8 X 2.4 P18 264 PSB10120264 END PLATE 304 PSB101203[...]

-10 6 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Apron F ront V iew 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 434 435 437 438 439 440 441 442 444 445 446 447 448 449 484 485 486 487 488 489 490 491 492 493 402 414 486 414 489[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -10 7 - P ARTS Apron F ront V iew Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 401 PSB10120501 COMBO GEAR 18T/60T 429 PORP026 O-RING 25.7 X 3.5 P26 402 PSB10390402 THRUST WASHER 430 PSB10120530 REVERSE FEED SHAFT HOUSING 403 PRP20M ROLL PIN 4 X 22 431 PS[...]

-10 8 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Apron Rear V iew 450 451 452 453 454 455 456 458 459 461 462 463 465 466 467 468 469 470 472 473 474 475 476 477 478 479 480 481 482 483 491 494 495 496 497 414 434 422 497 473 434[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -10 9 - P ARTS Apron Rear V iew Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 414 PSTB001 STEEL BALL 1/4 469 PSB10120569 LEVER HUB 422 PSB10120522 GEAR 18T 470 PSB10390470 COMPRESSION SPRING 6 X 27MM 434 PORP012 O-RING 11.8 X 2.4 P12 472 PRP04M ROLL PIN 4[...]

-1 10 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 501 PSB10120901 POST LEVER 517 PSB10120917 INDICATOR PLATE 502 PSB10120902 POST LEVER HUB 518 PSB10120918 LEADSCREW BRACKET 503 PSB10120903 HUB THRUST WASHER 519 PSB10120919 GRADUATED DIAL 504 PSB10120904 TO[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e - 111- P ARTS Saddle T op V iew 601 602 603 604 605 606 607 608 609 610 613A 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 654 655 656 657 658 659 660 661 662 663 664 666 667 668 601 609 608 660 660 601 638 656 630 [...]

-1 1 2 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Saddle T op V iew Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 601 PSB10390601 GIB ADJUSTMENT SCREW 630 PSB10390630 THRUST BEARING 1730-NTB/AS2 602 PSB10121002 CROSS SLIDE 631 PSB10121031 PINION SHAFT END CAP 603 PSB10121003 COMPOUND SLID[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 1 3 - P ARTS REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 641 PSB10121041 GEAR BUSHING 649 PSB10390649 ALUMINUM OIL PIPE 6 X 160MM 642 PSB10121042 GEAR 16T 650 PSB10390650 STRAIGHT PIPE ADAPTER 1/8 PT X 6MM 643 PSB10121043 GEAR SHAFT 651 PSB10121051 ONE-SHOT OILER[...]

-1 14 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Bed Stop 701 702 703 704 705 706 707 708 709 710 711 712 REF PART # DE SCR IP TIO N 701 PCAP71M CAP SCREW M10-1.5 X 60 702 PRIV001M STEEL FLUTED RIVET 2 X 5MM 703 PSB10120803 INDICATOR PLATE 704 PSB10120804 MICROMETER DIAL 705 PSB10120805 BED STOP CASTING 706 PS[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 1 5 - P ARTS Bed & Shafts 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836A 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862[...]

-1 16 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Bed & Shafts Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # DE SCR IP TIO N 801 PSB10121201 BED (SB1039) 836A PSB10121223A FEED ROD CLUTCH COLLAR ASSY 801 PSB10521201 BED (SB1052) 838 PSB10390838 TAPER PIN #4 X 1-1/4" 802 PSB10121202 BED STOP STUD [...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 17 - P ARTS REF PAR T # DE SCR IP TIO N REF PART # D ES CRI PT ION 901 PCAP02M CAP SCREW M6-1 X 20 911 PSB10121411 THRUST WASHER 902 PSB10121402 GEAR FLAT WASHER 912 PSB10121412 SHAFT SLEEVE 903 PSB10390903 GEAR 24T 913 PSB10121413 T-HEAD SHAFT 904 PSB10121404 PIVOT ARM 914[...]

-1 1 8 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Main Motor A A B B 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 10[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 1 9 - P ARTS Main Motor Par ts L ist REF PART # DES CR IPT ION REF PAR T # D ESC RIP TI ON 1001 PSB10391001 HEADSTOCK LEFT COVER 1027 PSB10391027 MOTOR PULLEY 1002 PSB10121505 KNURLED KNOB 1028 PN13M HEX NUT M16-2 1003 PVB76 V-BELT B76 1029 PSB10121532 ALL-THREAD STUD M16-2[...]

-1 2 0 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS St ands & Panels A A 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1106 1107 1105 1128 1129 1[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 2 1 - P ARTS Cabinets & Panels Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # D ES CRI PT ION 1101 PSB10391101 BRAKE PEDAL SHAFT (SB1039) 1124 PCAP26M CAP SCREW M6-1 X 12 1101 PSB10521101 BRAKE PEDAL SHAFT (SB1052) 1125 PSB10121637 SAFETY SWITCH BRACKET 1102 PSB101[...]

-1 2 2 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS T ailstoc k 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 2 3 - P ARTS T ailstoc k Par ts L ist REF PAR T # DE SCR IP TIO N REF PART # D ES CRI PT ION 1201 PSB10121801 TAILSTOCK LEADSCREW 1229 PSB10121830 DOG POINT SET SCREW 1202 PSB10121802 TAILSTOCK LEADSCREW NUT 1230 PSB10121831 TAILSTOCK BASE 1203 PK34M KEY 5 X 5 X 20 1231 PSB[...]

-1 2 4 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS REF P ART # DE SC RI PTI ON 1300 PSB10122012A STEADY REST ASSEMBLY 1301 PSB10122001 FINGER ADJUSTMENT KNOB 1302 PRP51M ROLL PIN 4 X 40 1303 PSB10122003 BUSHING 1304 PSB10122004 FINGER ADJUSTMENT SCREW 1305 PSB10122005 FINGER 1306 PSB10122006 DOWEL PIN 1307 P627[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 2 5 - P ARTS Electrical Cabinet & Control Panel Electrical Cabinet Control P anel 1401 1417 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1417 1402 1402 1415 1415 REF PAR T # D ES CR IPT IO N REF PART # D ESC RI PTI ON 1401 PSB10391401 ELECTRICAL BACKPLATE[...]

-1 2 6 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Accessories REF PART # DES CR IPT IO N REF PAR T # DE SC RIP TI ON 1501 SB1227 4-JAW CHUCK 10" ASSEMBLY 1511 PWR1012 WRENCH 10/12MM 1502V2 PSB10391502V2 3-JAW CHUCK 8" W/2PC JAW SET V2.05.11 1512 PWR1417 WRENCH 14/17MM 1503 PSB10391503 FACEPLATE ASSEM[...]

F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e -1 2 7- P ARTS F ront Mac hine L abels The safet y labels p rovided wit h your mach ine are used to make the op erator aware of the machine haz ards and ways to pr ev ent injur y. T he owner of this machine M UST m aintain the origin al locat ion and re adabili ty of th ese sa[...]

-1 2 8 - F or M achines Mfg. Since 5 /11 1 4 " T U RN- X ® T oolroom Lath e P ARTS Rear & Side Mac hine L abels REF PAR T # DE SCR IP TIO N REF PART # D ES CRI PT ION 1601 PSB10391601 MACHINE ID LABEL (SB1039) 1614 PSB10391614 TOOLROOM SERIES LABEL (SB1039) 1601 PSB10521601 MACHINE ID LABEL (SB1052) 1614 PSB10521614 TOOLROOM SERIES LABEL [...]

W AR R ANT Y This quality product is warranted by South Bend Lathe Company to the original buyer for one year from the date of purchase. This warranty does not apply to consumable parts, or defects due to any kind of misuse, abuse, negligence, accidents, repairs, alterations or lack of maintenance. We do not reimburse for third party repairs. In no[...]

Printed In U.S.A. #TS1436 4[...]