A&D AD-4212A-100/200/600/1000 инструкция обслуживания

AD-4212A/B AD-4212A-100/200/600/1000 A D-4212B-101/102/201/301 Production W eighing U nit INSTRUCTION M ANUAL 1WMPD4001448C[...]

© 2009 A&D Comp any , Limited. All rights reserved. No part of this publication may be reproduc ed, transmitted, transcr ibed, or translated into any language in any form by any means without the written permission of A&D Company , Limited. The contents of this manual an d the specifications of the instrument covered by this manual are sub[...]

1 CONTENTS 1. INTROD UCTION ................................................................................................................ ...............4 1-1 Feat ures ................................................................................................................... ............................ 4 1-2 Comp liance ...............[...]

2 10. FUNCTIO N T ABL E ............................................................................................................. ......... 28 10-1 S tructure and Sequence of the Func tion T able .............................................................................. .. 28 10-2 Displa y and Keys ..........................................[...]

3 18. CO MMANDS ................................................................................................................... ..............68 18-1 Comma nd List .............................................................................................................. .................... 68 18-2 Acknowledge Code and Error Codes .........[...]

4 1. INTRODUCTION This manual describes how the AD-4212A/B series bal ance works and how to get the most out of it in terms of performance. Read this manual thoroughly befor e using the balance and keep it at hand for future reference. 1-1 Features  Separate W eighing Unit and Display (standar d connection cable lengt h 2 m), suitable for buildi[...]

5  Clock and Calendar Function, adding the time and date to the output data.  GLP/GMP Output, using the RS-232C serial interface.  Reference Sheet, provided for a qui ck reference to the balance operation.  Windows Communication T ools (WinCT), allo ws easy communication with a Windows-based personal computer . Windows is a registered t[...]

6 2. UNPACKING THE BALANCE 2-1 Unpacking  The balance is a precision in strument. Unpack the balance care fully . Keep the packing material to be used for transporting the balance in the future.  See the illustrations to confir m that everything is contained. Provided for the AD-4212B series balance and the AD-4212-100. For the other models, [...]

7 Notes About how to attach the mounting fi xtures, refer to “26. ATTACHING THE MOUNTING FIXTURES” on page 91. Please confirm that the AC adapter type is correct for your local voltage and receptacle type. Calibration weight OIML, Class E2 or equivalent Mounting fi xtu re (2 pcs.) Window s commun ication tools (WinCT) D-Sub 25-p in connector T [...]

8 2-2 Installing the Balance Caution  The weighing unit and the display unit were ad justed as a unit. Therefore, make sure that the weighing unit and the display unit have the same serial number . The serial number is printed on the rear of the weighing unit and the display unit. The connection cable also carries the serial number . If the seri[...]

9 How to disconnect the cable from the w eighing unit Slide the connector sleeve in t he direction of the arrow to unlock and gently pull the connector out. 4. Adjust the leveling feet to level the weighi ng unit. Confirm it using the bubble spirit level. 5. Confirm that the adapter type is correct fo r the local voltage and power receptacle type. [...]

10 3. PRECAUTIONS T o get the optimum performance from the balan ce and acquire accurate weighing data, note the following: 3-1 Before Use  Install the balance in an environment where the temperature and humidity are not excessive. The best operating temperature is about 20° C / 68°F at about 50% relative humidity .  Install the balance whe[...]

11 3-2 When Building into a System The AD-4212A/B is a precision bal ance. When it is built into a sy stem and used, errors such as unstable weight values may occur due to static electricity , vibr ation and materials used for the devices near the balance. When using the balance that is built into a system, take the following precautions.  Error[...]

12 When an o perator is static charged If an operator ’s clothes are static charged, especially in winter , it may be a cause for unstable weight values.  Wear an anti-st atic wrist strap.  Errors due to air flow Where the i nfluence of am bient air flow is great such as: close to an air conditioner , door or passage way . Even very subtle [...]

13 Magnetic material The balance uses a strong magnet as part of the balance assembly , so use much care when weighing magnetic materials.  Place a non-magnetic object such as alum inum or brass between the sample and the balance, also keep an appropriate dist ance between them while weighing. 3-3 During Use  T o minimize the affect by electr[...]

14 4. DISPLAY SYMBOLS AND KEY OPERATION Key operation Key operation affects how the balance func tions. The basic ke y operations are:  “Press and release the key immediately” or “Press the key” = normal key operation during measurement  “Press and hold the key” Display symbols Each key , when pressed or when pre ssed and held, fu[...]

15 5. WEIGHING UNITS 5-1 Units With the AD-42 12A/B series bala nce, the f ollowing wei ghing un its and weighing m odes are av ailable: A unit or mode can be selected and stor ed in the fun ction table a s described in “ 5-2 Changing the Unit”. If a weighing mode (or unit of weight) has been tur ned off, that mode or unit will be missing in th[...]

16 The table below indicates the weighing capacity and the minimum display for each unit, depending on the balance model. AD-4212A-100 AD-4212A-200 AD-4212A-600 AD-4212A-1000 Unit Capacity Minimum display Capacity Minimum display Capacity Minimum display Capacity Minimum display Gram 110 0.0001 210 0.001 610 0.001 1100 0.001 Milligram 110000 0.1 21[...]

17 AD-4212B-102 AD-4212B-201 AD-4212B-3 01 Unit Capacity Minimum display Capacity Minimum display Capacity Minimum display Gram 110 0.00001 210 0.0001 310 0.0001 Milligram 110000 0.01 210000 0.1 310000 0.1 Ounce (Avoir) 3.88 0.000 001 7.40 0.00001 10.93 0.00001 Troy Ounce 3.53 0.000001 6.75 0.00001 9.96 0.00001 Metric Carat 550 0.0001 1050 0 .001 1[...]

18 6. WEIGHING 6-1 Basic Operation (Gram Mode) 1 Plug in the AC adapter. 2 Press the ON:OFF key to display the weighing mode. (The decimal point position depends on the balance model.) Notes The auto display-ON function is available to display the weighing mode without the key operation when the AC adapter is plugged in. (Function table: ba5fnc p-o[...]

19 6-2 Smart Range Function The AD-4212B-101 is equipped with two ran ges. T he precision range ha s a higher resolution. The standard range has normal resolution. The range switches automatically , depending on the value displayed. Pressing the RE-ZERO key allows weighing in the precision range, regardless of the tare value. The minimum weighing v[...]

20 7. CHANGING THE WEIGHING SPEED The weighing speed can be selected from the follo wing three rates to minimize the influence on weighing that is caused by draft s and/or vibrati on at the place where the balance is inst alled. Indicator Parameter Speed Stability FAST Cond 0 MID. Cond 1 SLOW Cond 2 F a s t S e n s i t i v e v a l u e S l o w S t a[...]

21 8. CALIBRATION Calibration Calibration using the calibration weight Calibration test T o check the weighing accuracy , using the ca libration weight, a nd output the result. (Calibration test does not perform calibration.) Caution  Calibration adjusts the balance for accurate weighing. Besides periodic calibration and before each use, perform[...]

22 8-1 Calibration This function calibrates the balance using the calib ration weight. (Display example: AD-4212B-102) Operation 1 Plug in the AC adapter and warm up the balance with nothing on the pan. • AD-4212A series balance: 30 minutes or more • AD-4212B series balance: one hour or more For the mod els with a minimum displa y of 0.1 mg or [...]

23 5 Confirm that there is nothing on the pan and press the PRINT key. The balanc e measures the zero point. Do not allow vibration or drafts to affect the balance. The balance displays the calibration weight value. 6 Place a calibration weight, of the weight val ue displayed, on the pan and press the PRINT key. The balance measures the calibration[...]

24 8-2 Calibration Test This function tests the balance weighing accuracy using the calibration weight and outputs the result. This is available only when the “GLP output ( info )” parameter is set to “ 1 ” or “ 2 ”. (Calibration test does not perform calibration. Di splay example: AD- 4212B-102) Operation 1 Plug in the AC adapter and w[...]

25 5 Confirm that there is no thing on the pan and press the PRINT key. The bala nce measures the zero point and displays the measured value. Do not allow vibration or drafts to affect the balance. The balance displays the calibration weight value. 6 Place a calibration weight, of the weight value displayed, on the pan and press the PRINT key. The [...]

26 9. FUNCTION SWITCH AND INITIALIZATION 9-1 Permit or Inhibit The balance stores parameters that must not be changed unintentionally (e.g. Calibration data for accurate weighing, data for adapting to the operat ing environment, control data for the RS-232C interface). There are two switches for protecting the parameters. T he switches can select e[...]

27 9-2 Initializing the Balance This function returns the following parameters to fa ctory settings.  Calibration data  Function table  Upper/lower limit values  The sample unit mass value (counting mode) , 100% reference mass value (percent mode)  The data that is stored in the bal ance using the data memory function  Calibration[...]

28 S t art, Fro m wei ghi ng m ode Press and hold Press several times Class End, T o weighi ng mode Ite m "Data m emo ry" Press several times Item Press five tim es Parameter "S tores w eighing data" Item "Int erv al ti me" Paramete r "1 minute " Press tw ice 10. FUNCTION TABLE The function table reads or rew[...]

29 10-3 Details of the Function Table Class Item and Parame ter Description 0 1 Cond Condition 2 Fast wei ghing s peed, s ensitive valu e F AST MID. Slow weighing speed, stable value SLOW 0 1 5t-b S tability band width 2 S table range is ±1 digit S table range is ±3 digit s The stabili zation indicator illuminates when the display fluctuation is [...]

30 Class Item and Pa rameter Description 0 3-level comparator contact output Cpout Comp arator output Cp-t Comp arat or out put setting 1 5-level comparator contact output Only the AD-4212B series balance displays this class and item. 0 No comparison 1 Comparison, excluding “ne ar zero” when st able or overloaded 2 Comparison, including “near[...]

31 Class Item and Pa rameter Description 0 Plus only Displayed value>Reference 1 Minus only Displayed value<Reference ap-p Auto print polarity 2 Both Regardless of displayed value 0 10 digits 1 100 digits ap-b Auto print difference 2 1000 digits Differe nce between reference value and displayed value 0 Not used 1 S tores unit mass in counting[...]

32 Class Item and Pa rameter Description 0 600 bps 1 1200 bps 2 2400 bps 3 4800 bps 4 9600 bps bp5 Baud rate 5 19200 bps 0 7 bits, even 1 7 bits, odd btpr Data bit, parity bit 2 8 bits, none 0 CR LF Crlf T erminat or 1 CR CR: ASCII code 0Dh LF: ASCII code 0Ah 0 A&D standard format 1 DP format 2 KF format 3 MT format 4 NU format type Data format[...]

33 10-4 Description of the Class “Environment, Display” Condition ( Cond ) Cond 0 This parameter is for sensitive response to the fluct uation of a weight value. Used when fast weighi ng speed is required. After setting, the balance displays F AST . Cond 2 This parameter is for stable weighing with slow response. Used to prevent a weight value [...]

34 Zero tracking ( trc ) This function tracks zero point drift caused by changes in the environment and st abilizes the zero point. Three levels of zero tracking are available. When the weight value is onl y a few digit s, turn the function off for accurate weighing. Note Digit, when used for the AD-4212A/B series balance, indicates the minimum dis[...]

35 T are at st art ( p-tr ) When a hopper is attached to the weighing pan and loss-in weighing is performed, t he remaining amount of the material will become unknown if tare is performed each time a weighing st arts. When " p-tr 0 " is selected, tare is not performed at we ighing start. So, the remaining amount of the material can be mon[...]

36 Key mode B When the PRINT key is pressed or the external PR INT conta ct input is us ed, the balance outputs or stores the weighing data immediat ely regardless of the display condi tion. At this time, the display does not blink. Key mode C When the PRINT key is pressed or the external PR INT conta ct input is used, with the st abilization indic[...]

37 DP (Dump print) format 5if type 1 This format is used when t he peripheral equipment can not receive the A&D format. If an AD-8121B is used, set the printer to MODE 3.  This format consists of sixteen c haracters excluding the terminator.  A header of two character s indicates the bal ance condition. No over load header is used.  Th[...]

38 LAB-0 123 C R L F 2004/0 7/01 C R L F C R L F 12 : 34 : 56 LAB -0123 , No,0 12, 20 04/0 7/01 , 12:3 4:56 , ST , +00 0.127 8, ~~ g<CR><LF> C R L F ST ,+000. 1278, g C R L F OL,+99999 99 E + 1 9, g CSV format 5if type 5  This format separates the data of A&D st andard format and the unit by a comma ( , ).  This format outputs[...]

39 10-8 Data Format Examples S table Unstable Overload Positive error Overload Negative error Space, ASCII 20h Carriage Return, ASCII 0Dh Line Feed ASCII 0Ah ( AD-4212A only) % % % % g mg Counti ng mode Precent mode Ounce (Avoir) Tr o y O u n c e Metric C arat Momme Pennyweight Grain Ta e l Ta e l ( H K , j e w e l r y ) T ael (T aiwan) T ael (Chin[...]

40 10-9 Clock and Calendar Function The balance is equipped with a clock and cal endar function. When the “GLP output ( info )” parameter is set to “ 1 ” or “ 2 ” and the “T ime/Date output ( 5-td )” parameter is se t to “ 1 ”, “ 2 ” or “ 3 ”, the time and date are added to the output data. Set or confirm the time and da[...]

41 Confirming the date 6 The current date is displayed with all the digits blinking.  To change the display order of year ( y ), month ( n ) and day ( d ), press the MODE key. The date is output in the order as specified.  When the date is correct and the operation is to be finished, press the CAL key and proceed to step 8.  When the time [...]

42 10-10 Comparator Function The balance outputs the results of the co mparison in three or five levels. AD-4212A series balance: 3-level output (standard) or 5-level output when OP-04 is installed. AD-4212B series balance: 3-level or 5-leve l output, switched by “Comparator output setting ( Cp-t )” of the function table. The comparison results[...]

43 Five-level comparison Contact output Comparison results Display H H HI OK LO LL Buzzer H H H H blinking short open open open open HI HI illuminated open short open open open OK OK illuminated open open short open open LO LO illuminated open open open short open LL L L blinking open open open open short * Set the upper limit value equal to or hig[...]

44 Confirming the upper/lower limit values T o confirm the upper/lower limit va lues during weighing operation, pr ess the MODE key . The upper/lower limit values will be displayed. Even under this condition, weighi ng operation goes on and data output, contact output of the comp arison results and RE-ZERO can be performed. When three-level compari[...]

45 Note The upper/lower limit values can be confirmed by external commands using the RS-232C serial interface. e.g., Command ? H H (to conf irm secondary upper limit value) Response H H , + 100.00000 g ( s e c ondary upper limit value=100.000 00 g) Command ?HI (to confirm upper limit value) Response H I + 080.00000 g ( upper limit value=80.00000 g)[...]

46 11. ID NUMBER AND GLP REPORT  The ID number is used to ident ify the balance when Good Laboratory Practice (GLP) is used.  The ID number is maintained in non-volatile memory even if the AC adapter is removed.  The GLP output format is selected a t “GLP outp ut ( info )” of the function table and can be output to a personal computer [...]

47 11-2 GLP Report Set the following parameters to output the report.  T o print the report, set the “GLP output ( info )” parameter to “ 1 ” and use MODE 3 of the AD-8121B. For details on using the printer , refer to “17-1 C onnection to the AD-8121B Printer”.  T o output the report to a personal computer us ing the RS-232C inter[...]

48 Calibration test report using an external weight (Calibration test does not perform calibration.) When the setting is “ info 1 ”: When the setting is “ info 2 ”: AD-812 1 format Gener al da ta form at Manu fa ctur er Model Serial numb er ID number Date Ti m e Calibrat ion t est type Zero point va lue Ta r g e t w e i g h t value Ta r g e[...]

49 Title block and end block When weight values are recorded as GLP data, a “T itle block” is inserted at the beginning and an “End block” is inserted at the end of a gr oup of weight values in the GLP report. Notes To output the report to an AD-8121B , use MODE 3 of the AD-8121B. If the data memory function is used, the “Tit le block” [...]

50 12. COUNTING MODE (PC) This is the mode to determine t he number of obje cts in a sample based on the standard sample unit mass. The unit mass is the mass of one piece of the sample. The smaller the variables in each sample unit mass are, the more accurate the co unting will be. The AD-42 12A/B series balance is equipped with the Aut omatic Coun[...]

51 Notes If the balance judges that th e mass of the samples is too light and is not adequate to be used as the unit mass, i t display s 1 lo . In that case, store th e mass by some quan tit y . For example, w hen the model wi th the minimum w eighing value of 0.01 g is us ed and 10 pieces o f samples w eigh 0.05 g. Store 100 pieces of sa mples as [...]

52 13. PERCENT MODE (Pct) This is the mode to display the weight value in percentage comp ared to a 100% reference mass and is used for target weighing or checking the sample variable. Selecting the percent mode 1 Set “ Unit selection ( Unit ) ” parameter of the function table to pct (percent mode). For details, refer to “5-2 Changing the Uni[...]

53 14. DATA MEMORY Data memory is a function to store weighing data or calibration data to display or output later . The data memory function can also store multiple upper/low er limit values or unit mass values, for later selection as necessary . One of the following data sets can be stored:  Weighing dat a (Up to 200 sets. 100 set s when the t[...]

54 14-2 Memory for Weighing Data  The data memory function can store 200 sets of weighing data (100 set if time and date are added). Even if the AC adapter is removed, the data is main tained in non-volatile memory .  It is not necessary that the printer or com puter be continually connec ted to the balance, because the balance stores t he we[...]

55  The following commands can not be used during data storage. Q Query command for weig hing data. S Query command for stable weighing data. SI Query command for weighing data. SIR Query command for c ontinuous weighing data. Setting the function t able Parameter settings for each output mode are as follows: I t e m Mode Data output mode Auto p[...]

56 T ransmitting all memory dat a at one time Confirm that the “Serial interface ( 5if )” parameters are set properly . For details, refer to “10. FUNCTION T ABLE” and “17. CONNECTION T O PERIPHERAL EQUIPMENT”. 1 Press and hold the PRINT key until reCall is displayed, then release the key. 2 Press the SAMPLE key to display out . 3 Press[...]

57 14-3 Memory for Calibration and Calibration Test Data  Calibration data (when and how it is performed) and calibration test data can be stored in memory .  All the data in memory is available to be output at one time to a printer or personal computer .  Up to 50 data set s of the latest calibration or calibration test can be stored. Whe[...]

58 14-4 Memory for Unit Mass in the Counting Mode  The data memory function can store 20 set s of unit mass for the counti ng mode. Even if the AC adapter is removed, the data is mainta ined in non-volatile memory . Among the 20 sets, “ p01 ” is the memory function for the standard counting mode.  The unit mass in memory can be recalled a[...]

59 14-5 Memory for Upper/lower limit values  Upper/lower limit values stored in memory can be selected easily by pressing the MODE key .  S torage capacity for the 3-level comparison is 20 set s of upper/lower limit values (code numbers C01 - C20 ). " C01 " is to store the upper and lower limit values that are set in the function ta[...]

60 Inputting the upper/lower limit values (3-level comparison) 1 Display the weighing mode. 2 Press and hold the PRINT key until the balance enters the upper/lo wer limit value selection mode as shown below. Display example The upper limit value of the currently selected code is displayed. 3 Select the code and upper/lower limit va lues to be used [...]

61 Switching the upper/lower limi t values (3-level comp arison) 1 Display the weighing mode. 2 Press the MODE key to select the upper/lower limit value code. 3 Press the PRINT key to return to the weighing mode. Upper /lower limi t value c ode Wei g h i n g m o d e Cod e C0 1 Uppe r li mit val ue Cod e C0 1 Lower l imit value Cod e C0 2 Uppe r li [...]

62 15. PROGRAMMABLE-UNIT (AD-4212A only) This is a programmable unit conv ersion function. It multiplies the weighing data in grams by an arbitrary coefficient set in the func tion table and displays the result. The coefficient must be within the range betwe en the minimum and maximum shown below . If the coefficient set is beyond the range, an err[...]

63 16. I/O UNIT SPECIFICATIONS (Standard interface) 16-1 RS-232C/Comparator Contact Output/Exter nal Contact Input D-Sub 25 pin numbers D-Sub 25 pin assignment s Pin No. Signal name Interface type Direction Description 1 FG - Frame ground 2 RXD RS-232C Input Receive data 3 TXD RS-232C Output T ransmit data 4 RTS RS-232C Input Ready to send 5 CTS RS[...]

64 Comparator contact ratings Maximum contact voltage 100VDC Maximum contact current 100mADC Maximum contact resist ance 20 Ω External cont act input Minimum contact time 100 msec +5V FG RXD TXD RTS CTS DSR SG FG TXD RXD RT S CTS DSR SG 1 2 3 4 5 6 7 Bal anc e (DCE ) Of DOS/V type (D-Sub9) Connector shell Pin 3 Pin 2 Pin 7 Pin 8 Pin 6 Pin 5 Pers o[...]

65 17. CONNECTION TO PERIPHERAL EQUIPMENT 17-1 Connection to the AD-8121B Printer Set the following parameters to use the AD-8121B printer . AD-8121B Class Item Factory setting Mode 1 Mode 2 Mode 3 prt Data ou tput mode 0 0 , 1 , 2 , 4 , 5 3 0 , 1 , 2 , 4 , 5 ap-p Auto print polarity 0 ap-b Auto print difference 1 * *1 Not applicable *1 d-no Data n[...]

66 17-2 Connection to a Computer The AD-4212A/B series balance is of the DCE type (Data Comm unication Equipment), which can be connected to a personal computer using the RS-232C interface. Before connection, read the personal computer manual thoroughly . Use a standard DCE cable for connection (cable type: straight through). 17-3 Using Windows Com[...]

67 Using the WinCT sof tw are, the balance can do the following: 1 Analyzing the weighing data and the statistics with “RsKey” The weighing data can be input directly into an Excel worksheet. Then, Excel can analyze the data to obtain total, average, standard deviati on, maximum and minimum value, and display them in a graph. 2 Controlling the [...]

68 18. COMMANDS 18-1 Command List Commands to query weighing dat a C Cancels the S or SIR command. Q Requests the weighing dat a immediately . S Requests the weighing dat a when stab ilized. SI Requests the weighing data immediately . SIR Requests the weighing data continuously . Commands to control the balance CAL Same as the CAL key . OFF Turns t[...]

69 18-2 Acknowledge Code and Error Codes When the “Serial interface function ( 5if )” parameter is set to “ erCd 1 ”, the balance outputs <AK> code or error code to each command as follows: <AK> (06h) Acknowledge in ASCII code.  When the balance receives a command to request data and can not process it, the balance transmits [...]

70 18-3 Control Using CTS and RTS Depending on the “ Ct5 ” parameter of “Serial interface ( 5if )”, the balance performs as follows: Ct5 0 Regardless of whether the balance can receive a co mmand or not, the balance keeps the CTS line HI. The balance outputs data regardless of the condition of the R TS line. Ct5 1 The CTS line is kept Hi no[...]

71 19. BCD OUTPUT (OP-01) Weighing data will be output in BCD, in sync with the display refreshing. In addition, the polarity (+/-) and balance condition (stable/not st able, ov erload(positive/negat ive)) will be output. The strobe signal allows inputting data easily . Inputti ng BUSY will hold data or prevent data that is being output from being [...]

72 Pin assignment s and I/O logic Output pin assignments Input pin assignments Pin No. Signal Pin No Signal 26 1 7 BUSY 27 2 9 RE-ZERO 28 4 5 ON/OFF Switch 29 8 10 0 3 Input signal GND 39 1 11 Not used (Reserved) 40 2 41 4 42 8 10 1 ・ The pins, which are not specified, have n o connection. (Pins 2, 4, 6, 8, 10, 36. 38) 12 1 Output logic 13 2 Fact[...]

73 T on Ｔ of f OFF ON OP-01 inst allation procedure 1 Remove the two screws that secure the I/O unit to the rear of the display unit. 2 Remove the I/O unit and disconnect the two cable connectors. 3 Connect the 14-pin cabl e connector that was removed in step 2 to the OP-01 connector. 4 Leave the 2-pin cabl e connector as is. 5 Secure the OP-01 b[...]

74 20. EXTENDED FUNCTIONS (AD-4212A only) The AD-4212A series balance has several extended functions equipped for spec ial applications or to troubleshoot when using the standard functions. Some settings of the extended functions may affect the weighing accuracy . Therefore, they are set to disabled at the factory when shipped. T o enable t he exte[...]

75[...]

76 20-1 Description of "Averaging range" and "Averaging time" A veraging range ( f1-b ) and averaging time ( f1-t ) 1. When the fluctuati on of a weight value is beyond t he range that is selected in " f1-b ", the averaging operation is disabled and the di splay reflects the varying value. 2. Once the fluctuation becom[...]

77 21. MAINTENANCE  Do not disassemble the balance. Contact the local A&D dealer if the balance needs service or repair .  Use the original packing material for transporta tion.  Do not use organic solvents to clean the balance. Cl ean the balance with a li nt free cloth that is moistened with warm water and a mild detergent. 22. TROUB[...]

78  When the balance is built into a system, remo ve the balance from the system. Place it on a solid table. Install the breez e break and perform checking. When the balance proper performanc e is confirmed, refer to page 10 to set up the inst allation site. Checking that the operating environmen t or weighing method is proper Operating environm[...]

79 22-2 Error Codes Display Error code Description Weighing u nit connection error The weighing unit is not connected to the display properly . Ref er to “2-2 Installing the Balance” to perform a proper connection. (CHECK NO) Internal error Indicates an internal error as the result of self-check function. Repair is required. Contact the local A[...]

80 Display Error code Description Unit mass error The sample unit mass for the counting mode is too light. S toring and using it for counting will cause a counting error . Add samples to reach the specified number and press the PRINT key . Pressing the PRINT key without adding samples will shift the balance to the counting mode. But, to acquire acc[...]

81 Display Error code Description EC, E03 T imeout error If the timeout parameter is set to “ t-Up1 ”, the balance did not receive the next c haracter of a command within the time limit of one second. Confirm the communication. EC, E04 Excess characters error The balance received excessive characters in a command. Confirm the command. EC, E06 F[...]

82 23. SPECIFICATIONS AD-4212A-100 AD-4212A-20 0 AD-4212A-600 AD-4212A-1000 Weighing capacity 1 10 g 210 g 610 g 1 100 g Maximum display 1 10.0084 g 210.084 g 610 .084 g 1 100.084 g Minimum weighing value (1 digit) 0.1 mg 1 mg Repeatability (S tandard deviation) 0 . 1 5 m g 1 m g Linearity ± 0.3 mg ± 2 mg ± 3 mg 0-30 g 1.1 0-30 g 0.8 0-30 g 0.9 [...]

83 AD-4212B-101 AD-421 2B-102 AD-4212B-201 AD- 4212B-301 Weighing capacity 1 10 g / 31 g *1 1 10 g 210 g 310 g Maximum dis play 1 10.0084 g / 31.00009 g *1 1 10.0084 g 210.0084 g 310.0084 g Minimum weighing value (1 digit) 0.1 mg / 0.01 mg *1 0.01 mg 0.1 mg 30 g 0.02 mg Repeatability (S tandard deviation) 0.1 mg / 0.05 mg *1 100 g 0.04 mg 0.1 mg 0.[...]

84 24. DESIGNING A SPECIAL WEIGHING PAN A weighing pan specially designed fo r the balance can be installed. Design the weighing pan as described below: Using the p an support The pan support can be removed. 38mm 38mm Four po ints on the periphe ral M3 screw : Length 5 mm or l ess Ce nt er M3 flat heat screw Length 5 mm or le ss Weighing pan S peci[...]

85 Using the p an boss The pan boss can not be removed. Shock absorber specifications The internal shock absorber functions at about 2 kg (as a static force), to protect the mass sensor . A static force of less than 2 kg will not damage the mass sensor . 5 Approx. 16mm 5 19.5mm 30 Three point M3 screw Length 4 mm o r les s 7.5mm Front Back Pan bo s[...]

86 Mass of the special weighing pa n (AD-4212A series balanc e) Design the weighing pan so that the mass fall s in th e ranges shown in the table below: Mass of special weighing pan (g) Pan support is used (with weighing pan removed) 20 to 70 AD-4212A-100 Pan boss is used (with the weighing pan and pan support removed) 60 to 1 10 Pan support is use[...]

87 AD-4212A-600 AD-4212A-1000 Notes If the balanc e is to be used in a range ot her than sho wn above, contact th e local A&D dealer. To avoid the effect by static electricit y or magnetism, use materials other than resin or magnetic materials when designi ng a special weighing pan. When a special weighing pan is used, the zero point may b e sh[...]

88 Mass of the special weighing pa n (AD-4212B series balance) Design the weighing pan so that the mass fall s in th e ranges shown in the table below: Mass of special weighing pan (g) Pan support is used (with weighing pan removed) 5 to 55 AD-4212B-101/102 Pan boss is used (with the weighing pan and pan support removed) 30 to 80 Pan support is use[...]

89 AD-4212B-201 AD-4212B-301 Notes If the balanc e is to be used in a range ot her than sho wn above, contact th e local A&D dealer. To avoid the effect by static electricit y or magnetism, use materials other than resin or magnetic materials when designi ng a special weighing pan. When a special weighing pan is used, the zero point may be shif[...]

90 25. INSTALLING THE DISPLAY UNIT Inst alling the display unit on a wall using the st andard stand 1. Secure the stand, that is attached to the display unit, on the wall using the four screws 2. Adjust the angle of the display unit and ti ghten the angle adjustment k nobs located on both sides of the display unit. Inst alling in a p anel 1. Cut th[...]

91 26. ATTACHING THE MOUNTING FIXTURES The mounting fixtures provided with the AD-4212A/B series balance are used to secure the weighing unit from above in a determined position, when the weighi ng unit is built into a system. T o attach the fixtures to the weighing unit, use the screw holes after the three leveling feet are removed from the bottom[...]

92 27. EXTERNAL DIMENSIONS Display unit Weighing u nit (Bottom) Same for all the models Weighing u nit AD-4212A-100/200 AD -4212B-101/102 AD-4212B-201/301 Unit: mm Scre w part M6XP 0.7 5 Dep th 20mm 20 (98) 62 25 176 (239) 9 40 40 237 192 59 95 155 149 65 29 107 11 5 Height up to the pan boss 90 (8 5 ～ 95) * 87 (82 - 92) * Height up to th e pan b[...]

93 AD-4212A-600/1000 Weighing u nit with the mounting fixtures att ached Unit: mm * Adjus table ra nge 70 62 230 176 25 9 70 80 (98) * 92.5 (87.5-97 .5) Height up to th e pan boss 87 (8 2-9 2) 62 0.2 235 0.4 62 0.2 210 249 12 12 80 (90) 10 70 φ 6.5[...]

94 28. OPTIONS AD-8121B Printer  Compact thermal dot-matrix printer  S tatistical function, clock and calendar function, interval print function, graphic print function, dump print mode  5 x 7 dots, 16 characters per line  Print paper (AX-PP143, 45 (W) x 50 (L) mm , ø65 mm)  AC adapter or alkaline battery . AD-1683: DC static elimin[...]

95 OP-08: Ethernet interface  Used to connect the balance to a LAN.  The "Win CT -Plus" data communication software is provide d as an accessory and can perf orm the following. Acquir e data from multiple balances connected t o a LAN. LAN c onnection ena bles reliable data acquisiti on. Cont rol these bal ances with comm ands. Acqui[...]

96 29. TERMS/INDEX Te r m s St able value The weight data when the st abilization indicator appears. Environment Ambient conditions such as vibration, dr afts, temperature, st atic electricity or magnetic fields which affe ct the weighing operation. Sto re T o save the weighing data, unit mass, calibration data or upper/lower limit values using the[...]

97 AD-812 1B .................................................... 65 Ambient humid ity ......................................... 1 1 Anti-stati c agent ........................................... 1 1 Anti-static wr ist strap ................................... 12 ap-b Auto print difference ........... 31, 65 ap-p Auto prin t polarity...............[...]

98 - G g5i Capacity indicato r ................. 29, 34 GLP repor t ....................................... 21, 46, 47 Gram m ode ................................................. 18 - H - HI ............................................ 4, 42, 43 Hold Hold function ........................ 29, 33 - I - id ID number se tting ....................... [...]

99 5-id ID num ber output ................ 31, 38 SLOW ....................................................... 20 5pd Display refresh rate ............. 29, 34 S tability band wi dth ................................ 29, 33 S tability error ................................................ 79 S tabilization time .......................... 4, 82, 83, [...]

100 MEMO[...]