Aastra ATP-CNX-020 инструкция обслуживания

ATP-CNX-020 Document Revision 01.06 Aastra CNX Conference Network Switch Release 1.2 July 2005 Aastra CNX Conference Network Switch Inst allation and Setup Guide[...]

*Aastra, Aastra T elecom, and the Aastra T elecom corporate logo are registered trademarks of Aastra T echnologies, Limited. Microsoft, Microsoft Windows, and In ternet Explorer are trademar ks of Microsoft Corporat ion. NFS, Sun, SunOS, Java, JavaHelp, Solaris, and Sun Microsystems ar e trademar ks of Sun Microsystems, Inc. Ethernet is a r egister[...]

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 iii Cont ents Contents Warranty, regulator y, safety, and copyright / licens ing notices W arranty - Aastra T elecom, Inc. ............... .... ......... ............. ................ ............. ............. ..... v . W arranty Limitation ............ ................ ............. ................ .......[...]

[...]

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 v W arranty , regulatory , safety , and copyright / licensing notices W arranty - Aastra T elecom, Inc. Aastra T elecom Inc. ("Aastra" ) warrants ("W arranty") to its customer that: (i) Aastra has good and ma rketable title to the Product at the time of delivery to its customer , free and cl[...]

Regulatory information vi ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Regulatory information U.S.A. requirement s The AASTRA CNX has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commi ssion (FCC) rules . These limits ar e des[...]

Regulatory information ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 vii If you experience trouble with this equipm ent, please contact Aast ra T elecom for repair and warranty information. If there is a problem with the network, the telephone company may request th at you remove the equipment from the network until the problem is reso lved. Aastra T eleco[...]

Regulatory information viii ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Repairs to certified equipment sh oul d be made by a supplier -designated re presentative. If you make repairs or alterations to this equ ipment, or if the equipment ma lfunctions, the teleco mmunications company ma y request that you di[...]

Regulatory information ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 ix European requirement s EMI/EN 55 022 statement This certifies that t he Aastra CNX Asterisk Net work Switch is shielded agai nst the generation of rad io interference in accordance with the application of C ouncil Directive 89/336/EEC. Conformity is declared by the application of EN 55[...]

Safety warnin gs x ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Safety warnings General warnings The following safety warnings apply: • Mechanical hazards and electrical s hock hazards ar e possible if you remove one or more of the modules. There are no operator- serviceable modul es. Only qualified person[...]

Software lic ensing and copyright ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 xi Software licensing and copyright The Aastra CNX product co nsists of an Aastra designed hardware platform distributed with embe dded Linux operatin g system and applic ation software. This embedded software consists of multiple Aastra and third party programs; each individua[...]

[...]

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 xiii We l c o m e Introduction Congratulations!! Y ou have purchase d a highly functional, cost-effective, easy-to-use Aastra CNX Conference Network Switch for use in your network. The Aastra CNX is easy to install and operate, and provides a comprehensive set of security features you would expect from a state-[...]

Introduction xiv ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide What is in the Aastra CNX shipping p ackage? The Aastra CNX is carefully and securely p ackaged within the shipping container . Upon opening the shipping p ackage, inventory the contents to be sure there are no missing or damaged parts. The followi[...]

ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 1 Aastra CNX Installation and Setup Procedures Procedures Introduction This section provides quic k installation and setup procedures for installing and starting up the Aastra CNX Conference Network Switch. This se ction also provides a list of additional parts that you need to install the Aastra CNX. Reference[...]

Procedures 2 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Prep aring for the hard ware inst allation W hat y ou need for a single installation One Aastra CNX unit One A C power cab le One CompactFlash memor y card One set of rac k mounting brac kets with six (6) Phillips head scre ws T russ head screws ( not[...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 3 Aastra CNX Installation and Setup Procedures Inst alling the Aastra CNX in a rack W arning: Bef ore you install the Aastra CNX unit in a r ack, ensure that the r ack is sturdy and w ell secured. Caution: The operating environment m ust provide unobstructed front-to-back airflo w to the chassis moun[...]

Procedures 4 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Connecting to the console port T o connect a local PC or ter minal: a. Attach the 9-pin male DB-9 connector on the ser ial cable to the f emale console por t on the rear panel of the Aastra CNX. b. Attach the 9-pin female connector on the serial cable[...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 5 Aastra CNX Installation and Setup Procedures Connecting the network cables T1/E1 Connect the RJ-48C T1/E1 cable(s) to the RJ-48C T1/E1 por t(s) on the rear panel of the Aastra CNX . Ethernet Connect the RJ-45 Ethernet UTP cable(s) to the RJ-45 10/100 ENET por t(s) on the rear panel of the Aastra CN[...]

Procedures 6 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Connecting the AC power cable Ground the c hassis a. Locate the 3-hole, f emale, po wer receptacle on the rear of the chassis. b. Plug the male, 3-prong connector on the po wer cab le into the power receptacle . c. Inser t the plug at the other end of[...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 7 Aastra CNX Installation and Setup Procedures S t arting up and checki ng the Aastra CNX A pply po wer to the Aastra CNX T o star t up the Aastra CNX, inser t the CompactFlash card into slot 1 of the unit and apply power from the power source . Star ts diagnostic test routines on the Aastra CNX. Che[...]

Procedures 8 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Configuring the network settings Requirement s The following is requi red be fore you configure the Aastra CNX for the first time: • The Aastra CNX must physically be connected to your conso le using an RS-232/DB-9 cable. • The Aastra CNX must ph [...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 9 Aastra CNX Installation and Setup Procedures (1) Run network and tim e configuration Use the following procedure to initially config ure the network settings on the Aastra CNX hardware. Ste p Action 1 After first-time powe r up of the CNX, the foll owing displays in a terminal window: Welcome to th[...]

Procedures 10 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide 6 Enter “ y ” if the network informati on is correct, and press <Enter>. Enter “ n ” if the network information is incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat steps 3 through 7 [...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 11 Aastra CNX Installation and Setup Procedures 9 Enter the domain name for the Aastra CNX and press <Enter>. For exa mple: Domain Name: aastra.com ↵ The following prompts display: Nameserver #1: Nameserver #2: 10 Enter the IP address of the DNS servers for the Aastra CNX and press <Ente r[...]

Procedures 12 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide 11 E n t e r “ y ” if the DNS information is correct, and press <Enter>. Enter “ n ” if the DNS informatio n is incorrect, and p ress <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat steps 9 and 10 to co[...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 13 Aastra CNX Installation and Setup Procedures 13 Enter “ y ” if the timezone is co rrect, and press <Enter>. Enter “ n ” if the timezone is incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat step 12 to correct the ti mezone, and then[...]

Procedures 14 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide 15 Enter “ y ” if the date and time are co rrect, and press <Enter> . Enter “ n ” if the date and time are incorrect, and press <Enter>. Note: If you en tered “ n ” at the verification prompt, repeat step 14 to correct the dat[...]

Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 15 Aastra CNX Installation and Setup Procedures 17 Enter up to four NTP servers in your network, and press <Enter>. For example: NTP Server #1: [pool.ntp.org ]: 192.167.2.11 ↵ NTP Server #2: [pool.ntp.org ]: 192.167.2.12 ↵ NTP Server #3: [pool.ntp.org ]: 0.0.0.0 ↵ NTP Server #4: [pool.ntp[...]

Procedures 16 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Using the Aastra CNX GUI via the W eb Using the Aastra CNX GUI via the W eb 8 T o begin using the Aastra CNX GUI via the W eb interface: I mportant: The JRE allows you to use the Aastra CNX g raphical user interf ace (GUI) to configure, manage, and m[...]

[...]

Aastra CNX Conference Network Switch Installation and Setup Guide Printed in the USA A TP-CNX- 020 Aastra CNX Release 1.2, Document Revision 01.06 July 2005[...]