ACTi VER. 061030 CAM-6500 инструкция обслуживания

IP Indoor High Speed Dome CAM-6500 series Ver. 061030 Hardware User’s Manual[...]

0-1 0 PRECAUTIONS 1. Read these instructions All the safety and operating instructions should be read before the product is operated. 2. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following items, please carefully read the description next to each symbol. a. Failure to [...]

0-2 typographical or technical errors and reserv e the right to make changes to the product and manuals without prior notice. FCC/CE Regulation NOTE: This equipment has been tested a nd found to comply with the lim its for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona ble protection aga[...]

0-3 Table of Contents 0 PRECAUTIONS________________________________________________ 0-1 Copyright __________________________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ___________________________________________________________________ 0-1 FCC/CE R egulation [...]

0-4 B-3: Con figuration M enu _______________________________________________________ 42 B-3-1 DEFAULT C AMERA __________________________________________________ 43 B-3-2 BACKLIG HT ________________________________________________________ 43 B-3-3 FOCUS _____________________________________________________________ 44 B-3-4 APERTURE ________________[...]

1 1 INTRODUCTION 1.1 Package Contents CAM-6500 series Warranty Card Product CD Power & A/V Cable LAN/WAN Cable Power Adaptor (Option) 5.4” Transparent Cover Decoration Ring / Fixing Plate 1[...]

2 1.2 Features and Benefits The IP High Speed Dome is designed to deliver superb performance and durability with an intelligent and styl ish housing. It also provides a realiable real time images with outstand ing image quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. That’s because it is Ethernet (LAN and WAN) rea[...]

3 MODEL) z Low-Light Application Digital Slow Shutter and Electronic Shutter functions are provided for clear and high quality image. Th e minimum illumination is 0.01 Lux. z Perfect Contrast Solution for High Image Quality Wide Dynamic Range function is a salie nt features incorporated to fit your needs (23x MODEL) z Privacy Mask for Privacy Prote[...]

4 The IP high speed dome provides tw o RJ-45 connectors. One is WAN and the other is LAN. The WAN port connects to the internet and LAN port connects to the local network. Si nce the internet’s bandwidth is very critical, the WAN port is equipped with a lo w latency PPPoE (Point-to-Point over Ethernet) whic h has excellent tran smission speed and[...]

5 1.3 Safety Instructions z Don’t use the power supply with other voltages This device is likely to be damaged or damage other equipm ents / personnel, if you use a power supply with different voltage than the one included with this device. A ll warranty of this product will be voided in the situations above. z Don’t open the housing of the pro[...]

6 1. When the power-supply cord or plug is damaged. 2. If liquid has been spilled, or obj ects have fallen into the vid eo product. 3. If the video product has been expos ed to rain or water directly. 4. If the video product does not ope rate normally by following the operating Instructions in this ma nual. Adjust only those controls that are cover[...]

7 1.4 Physical Description Indoor High Speed Dome Bottom 1. Reset Button Step 1: Switch off IP device by di sconnecting the power cable Step 2: Press and continue to hold the Reset Button. Reconnect the power cable while continuing to hold the reset button. Step 3: Keep holding the reset button depressed around 6 seconds, release the reset button. [...]

8 Pin 4 Line Lock Pin 5 System Initialization (for upgrade) Pin 6 Reserved RS-232 is reserved for internal us e only; The Pin 3 and Pin 4, they are used for termination and Link Lock adjustment respectively. The Pin 5 is mainly used for retu rn to factory default of camera setting. 3. Dome ID Setting Use the switch to change your speed dome ID by t[...]

9 14 Pelco P 9600 Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance, the ID switch should be set as below: decimal single digit 5. 16 Pin Connector for LAN/WAN The LAN/WAN cable (shown as th e figure below) is shipped with IP high speed dome. Please find it in the accessory bag. 6. 22 Pin Connector A 50cm data cable (sho[...]

10 1.5 Mounting the IP High Speed Dome Generally, there are three kinds of ceiling mounting methods: surface m ount, in-ceiling mount, and mounting with stra ight tub e. The surface mounting kit is shipped with IP high speed dome. For more detailed inform ation, please refer to Appendix A. Surface ceiling mount (cables exposed)[...]

11 1.6 Basic Connections Follow the procedures below to conn ect the IP high speed dome to the respective apparatuses.[...]

12 Appendix A: Speed Dome Installation Basing on user’s installation environments , the dome can be installed on ceiling, on wall or on pole. In the following section, various indoor speed dome installation accessories, installation methods and insta llation procedures will be des cribed in detail. A-1: Optional Accessories Surface Ceiling Mount [...]

13 Ceiling Panel For ceiling mounting. Zn platted; 610× 305 mm (24× 12 inches); Diam eter: 155 mm (6.1 inches) Transparent Cover/Smoke Cover Diameter: 137 m m (5.4 inches); 127 m m (5.0 inches) 5’’ Transparent Cover 5.4’’ Transparent Cover 5’’ Smoke Cover 5.4’’ Smoke Cover Indoor Mount Kit White; Diameter: 140 mm (5.5 inches); Hei[...]

14 Mounting Accessories Gooseneck Tube White/Iron; 298×385 mm (11.73×15.56 inches) ; 2.1 kg (4 .6 lbs) Supplied with rubber washer- 8×1, pendant tube washer×1, spri ng washer-8×1 and waterproof rub ber× 1, M8 *1 2 screw× 1. Straight Tube White/Iron; Height: 250/500 mm (9.8 /19.7 in ch es); Diameter: 50 mm (2 inches) 1 kg (2.2 l bs) / 1.8 kg [...]

15 washer-8×4, sp ring washer×4, M8*20 screw ×4, M8 nut×4. Pole Thin Direct Mounting White/Ivory ; 232(L)×136(W) ×60(D) mm (9. 1×5.4×2.4 inches); Diameter: 112~ 140 mm (4.4~5.5 inches) ; 0.7 kg (1.6 lbs). Supplied with stainless steel straps×4, M8*16 screw× 4, washer×4. Pole Wide Direct Mounting White/Ivo ry; 270(L)×17 0(W)×60(D) mm (1[...]

16 Corner Thin Box White/Ivo ry, 300(L)×1 64(W)×222(D ) mm (11.8× 6.5×8.7 i nches); 3 kg (6.7 lbs); Su pplied with washer×4, M8*1 6 screw×4 and spr i ng washer×4. Corner Wide Box White/Ivory; 23 2( L)×234(W)×210( D) mm (9.1×9 .2×8.3 inches); 2.7 kg ( 6 lbs); Supplied with washer×4, M8*1 6 screw×4 and spr i ng washer×4.[...]

17 Pole Thin Box White/Ivo ry; 291(L)×1 36(W)×245(D ) mm (11.5× 5.3×9.5 i nches); 3.1 kg (6.9 lbs ); Supplied with M8*16 screw×4, washer×4 , sp ring washer×4, stainless steel straps×4. Pole Wide Box White/Ivo ry, 270(L)×1 66(W)×155(D) mm (10.6×6.5×6. 1 inches); 3.2 k g (7.1 lbs); Supplied with M8*16 screw×4, washer×4 , sp ring washer?[...]

18 Stainless Steel Straps For fixing Pole Direct Mounting/ Pole Box on the pole. Width: 0.6 3 ” ; 0.02 kg (0.04 lbs) Stainless Strap Cutter For tension, cut and crimp stainle ss steel straps. 1.4 kg (3.1 lbs) Suitable fo r straps width: 1/2”, 5/8”, 3/4” Other Application Accessories Repeater/Converter D77R1: RS-485/RS232 Converter D77R2: RS[...]

19 D 7 7 R 1 D 7 7 R 2 D 7 7 R 3 Connector Box (Ind o or App l i cati on ) Recommended for wiring indoor dome alarm cables. White Color. 92×42 m m (3.7×1.7 inches ); 0.13 kg ( 0.3 lbs); Suppli ed with cable× 1, bracket×1 a nd M3*6 scre w×2. Power Box White; 186.5 ×1 47 mm (7.3×5 .8 inches) ; 2.6 kg (5.8 lb s) P1030 (Input : 11 0~ 115VAC/ Out[...]

20 A-2: Ceiling Mount Generally, there are three kinds of speed dome camera ceiling m ounting methods: surface mount, in-ceiling m ount, and moun ting with straight tube. Refer to the following sections for more detailed information. The following figures show how cables connect to the speed dome camera in different ways. Surface ceiling mount (cab[...]

21 A-3: Surface Ceiling Mounting Surface Ceiling Mounting is a standard inst allation for an indoor dom e, and general mounting accessories are equipped in the st andard indoor dome camera package. Here lists the items and tools needed to m o unt the dome camera onto the ceilings. The supplied items are all in the speed dom e camera package. Items [...]

22 STEP 3 Attach the Mount to the ceiling. Mark the locations where all three ceiling holes should go. STEP 4 Drill these holes on the surface ceiling. STEP 5 Fix the Mount to the holes on the surface ceiling with three screws. STEP 6 Thread the data cable through the center hole of the Mount and connect the cable to the dome body.[...]

23 STEP 7 Attach the dome body to the Mount and rotate the dome clockwise. Tighten the fixing screw to fix the dome body. STEP 8 Fix the decoration ring to the bracket and then place the optical cover. A-4: Ceiling Panel for In-ceiling Mounting To mount the speed dome camera to a susp ended ceiling with the T-Bar, the ceiling panel could be employe[...]

24 A-5: In-ceiling Mounting Here lists the items and tools needed to m ount the dome camera into the ceilings. The supplied items are all in the dom e camera package. Items Needed: 9 IP High Speed Dome Camera 9 T-Bar (Optional Accessory) 9 Supplied Screw (Equipped with T-Bar) 9 Red Sticker (Equipped with T-Bar) 9 Decoration Ring (Equipped with Surf[...]

25 Step 2: Attach the separated wing to the dome, as shown in the diagram. STEP 3 Place the Red Sticker on the ceiling plate, and cut the circle part out of the ceiling. STEP 4 Put up the T-Bar into the ceiling hole. STEP 5 Rotate T-Bar wings of the hinge to fix the T-Bar at the edge of the ceiling hole.[...]

26 STEP 6 Tighten the screws, and the T-Bar wings will adhere to the ceiling. STEP 7 Put the 22-pin data cable through the center hole of the T-bar and connect it to the dome body. STEP 8 Mount the dome body to the Bracket and rotate it clockwise. Tighten the fixing screw to fix the dome body. STEP 9 Fix the decoration ring to the bracket and then [...]

27 A-6: Ceiling Mount with Straight Tube The straight tube is available in different length: 25cm and 50cm. Follow the steps to mount the speed with the straight tube. (1) Ensure that the ceiling can support the weight of the speed dome camera and straight tube. (2) Make a cable entry hole on the ceiling (3) Fix the suspension bracket to the ceilin[...]

28 A-7: Wall Mount A-7-1 Wall Mounting with Gooseneck T ble The following figures show how cables r un through the tube in different ways. Cables exposed Cables recessed Follow the steps to mount the speed dome with the gooseneck tube. (1) Make a cable entry hole on the wall to recess the cables. Otherwise, cables can be threaded through the cable [...]

29 A-7-2 Wall Box Mounting Follow the steps to mount the dome with the wall box and gooseneck tube. 1) Fix the wall box to wall. 2) Fasten the gooseneck tube on the wall box. 3) Thread the cables through the gooseneck tube and the Indoor Mount Kit and connect them to the dome camera. For installation of the cable s, Indoor Mount kit and the dome ca[...]

30 A-8: Corner Mount A-8-1 Corner Standard Mounting Plate With the corner mounting plate and goosen eck, the dom e can be mounted on wall. There are various types of corner moun ting accessories with different width. 1) Make a cable entry hole on the wall to recess the cables. Otherwise, cables can be threaded through the cab le entry hole on the t[...]

31 A-8-2 Corner Thin/Wide Box Mounting The thin/wide corner box is designed to be installed with a gooseneck tube. Follow the steps to mount the dome camera with the corner box and gooseneck tube. 1) Make a cable entry hole on the wall to recess the cables. Ot herwise, cables can be threaded through the cab le entry hole on the tube 2) Fix the susp[...]

32 A-9: Pole Mount A-9-1 Pole Thin/Wide Direct Mounting The dome can be installed on a pole with a thin or wide pole mounting accessory and a gooseneck. 1) Fasten the suspension mounting plate on a pole with equipped stainless straps 2) Fix the gooseneck tube on the pole mounting plate 3) Thread the cables through the gooseneck tube and the Indoor [...]

33 A-9-2 Pole Thin/Wide Box Mounting Follow the steps to mount the PTZ camera with the pole box and gooseneck tube. 1) Fasten the pole box on a pole with equipped stainless straps 2) Fix the gooseneck tube to the pole box 3) Thread the cables through the gooseneck tube and the top holder and connect them to the PTZ camera 4) Fix the top holder to t[...]

34 Appendix B: OSD Menu Notes B-1: OSD Display Format The information shown on the screen ar e described in terms of OSD display, position and function descrip tion in the table below. 1 2 3 4 56 Position Function OSD Display Description A Auto Focus Mode 1 Focus Modes M Manual Focus Mode X Back Light Compensation OFF 2 Backlight B Back Light Compe[...]

35 Item Layer 1 Layer 2 Layer 3 Default CAMERA BACKLIGHT <ON>, <OFF> OFF AUTO AF Mode <Normal>, <Interval>, <Zoom Trigger> Normal FOCUS MANUAL Focus Manual Speed <01>~<08> AUTO Exposure Co mp. <OFF >, <1>~<15> OFF BRIGHT Bright <0> ~ <31 > SHUTTER Shutter Speed <1> ~ <[...]

36 Item Layer 1 Layer 2 Layer 3 Default ALARM SWITCH <ON>, <OFF> OFF ALARM TYPE <N.O.> (Normal Open), <N.C.> (Normal Close) N.C. PRESET ☆ SEQUENCE AUTOPAN ALARM ACTION CRUISE PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE <001> ~ <256> <1> ~ <8> <1> ~ <4> <1> 001 DWELL TIME &l[...]

37 Item Layer 1 Layer 2 Layer 3 Default END POINT <TO FIND>, <TO SAVE> DIRECTION <RIGHT>, <LEFT> Right SPEED <01> ~ <04> 01 RUN AUTOPA N EXIT RECORD START RECORD END RUN CRUISE CRUISE EXIT IR FUNCTION (F/U model only) <AUTO>, <ON> Auto DETECT SWITCH <ON>, <OFF> OFF DETECT MODE <INT. FOC[...]

38 Item Layer 1 Layer 2 Layer 3 Default SCHEDULE SW. <ON>, <OFF> OFF SCHEDULE POINT <01> ~ <32> 01 SCHEDULE HOUR 00 SCHEDULE MIN 00 NONE ☆ PRESET SEQUENCE AUTOPAN CRUISE SCHEDULE MODE IR FUNC. NO FUNCTION PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE IR FUNCTION <1> ~ <256> <1> ~ <8> <1>[...]

39 Item Layer 1 Layer 2 Layer 3 Default H APERTURE <00> ~ <31> MANUAL V APERTURE <00> ~ <31> AUTO IRIS OFFSET <0 0> ~ <99> 50 SHUTTER SHUT TER SPEED <1/2> ~ <1/30000> IRIS IRIS < 00> ~ <09> AE MODE AGC AGC <00> ~ <05> AUTO ☆ R Gain <00> ~ <99> WBC MODE MANUA L B G[...]

40 Item Layer 1 Layer 2 Layer 3 Default PRESET POINT SEQUENCE LINE AUTOPAN LINE CRUISE LINE <001> ~ <256> <1> ~ <8> <1> ~ <4> <1> 001 DWELL TIME <001> ~ <127> Sec., ALWAYS ALWAYS EXIT YES HOME FUNC. <ON>, <OFF> OFF PRESET ☆ SEQUENCE AUTOPAN SELECT MODE CRUISE PRESET POINT SEQUENCE [...]

41 Item Layer 1 Layer 2 Layer 3 Default RUN CRUISE EXIT THRESHOL D <LOW>, <MID>, <HI> LOW IR COLOR <B/W>, <COLOR> B/W AUTO EXIT IR FUNCTION (K model only) ON WDR SWITCH <ON>, <OFF> OFF AUTO ☆ RATIO LEVEL <000>~<1 28> SHUTTER LEVEL <000>~<1 28> WDR FUNC TION MANUA L IRIS OFFSET <[...]

42 Item Layer 1 Layer 2 Layer 3 Default SWITCH SCHEDULE POINT <01> ~ <32> 01 SCHEDULE HOUR 00 SCHEDULE MIN 00 NONE ☆ PRESET SEQUENCE AUTOPAN CRUISE SCHEDULE MODE IR FUNC. NO FUNCTION PRESET SEQUENCE LINE AUTOPAN LINE CRUISE LINE IR FUNCTION <1> ~ <256> <1> ~ <8> <1> ~ <4> <1> <AUTO>, <[...]

43 18x MODEL 22x MODEL/23x MODEL B-3-1 DEFAULT CAMERA The “DEFAULT CAMERA” is used to restore the camera settings (e.g. Backlight/Focus/AE//WBC/Aperture). Once an y one of the item s is modified, the setting will become <OFF> automatically. Select <ON> f or this item to recall the mentioned camera param eters. B-3-2 BACKLIGHT The Ba[...]

44 B-3-3 FOCUS Automatically adjusts the focus position to maxim ize the high frequency content of the picture in a center measurem ent ar ea, taking into consideration the high luminance and strong contrast components. The focus of the dome cam era can be operated in two modes: Manual Focus mode and Auto Focus m ode. Different settings for various[...]

45 B-3-4 APERTURE Sharpness is the subjective evaluation of detail in the picture. W ith this “APEATURE” function, users can adjust th e enhancement of the edges of objects in the picture. When shooting text, this function m ay help by making them sharper and achieve a better image. There are 32 levels of adjustment, the options are <00> [...]

46 internal brightness refere nce level through auto Exposure Comp. to control the brightness of camera. The value of Exposure Comp. is selectable from <0> to <16> and the gain varies from -10.5 dB to 10.5 dB. Each step is 1.5 dB; the Exposure Comp. vaue <7> is equal to gain value 0 dB. The camera will not compensate brightness wh[...]

47 to get consistent exposure. ♦ IRIS With this option, the IRIS priority is higher than SHUTTER and AGC; SHUTTER and AGC circuit will functi on automatically in cooperating with IRIS to get consistent exposure. If the IRIS is modified manually, the action of exposure compensation depends on the AGC circuit. ♦ AGC With this option, the AGC prio[...]

48 3200K Base mode ♦ OUTDOOR 5800K Base mode ♦ ATW Auto Tracing White Balance mode. Th e dome taking out the signals in a screen in the range from 2000K to 10000K. ♦ MANUAL In this mode, users can change the White Balance value manually; R gain and B gain are adjustable and range from 0 to 128. ¾ 22x MODEL / 23x MODEL ♦ AUTO In this mode, [...]

49 monitor screen. ♦ OFF Hide the ID address of the selected dome. B-3-8 SETUP MENU Users can adjust camera lens m odel parameters under SETUP MENUs. Depending on the model of dome cameras, the SETUP MENUs are different. 18x MODEL 22x MODEL / 23x MODEL ♦ FLIP (IMAGE/ME/OFF) SETUP PAGE F L I P O N ZOOM SPEED FAST SPEED BY ZOOM ON AUTO CALI. OFF [...]

50 User can track an object continuous ly when it passes through under dome camera with setting Flip to IMAGE (dig ital f lip) or M.E. (m echanical flip). IMAGE IMAGE represents digital IMAGE FLIP, enables users to keep tracking object seamlessly and no delay occurs in comparing with m echanical flip. M.E. The item is a standard mechanical operatio[...]

51 algorithm when zooming autom atically. The larger zoom ratio leads the lower rotation speed. ♦ AUTO CALIBRATION There are one horizontal and one vertical infrared rays check points in each dome. When the dom e camera position m a y be moved during installation or maintenance, the relative distance between the original set point and the check p[...]

52 lux. ¾ 23x MODEL The shutter speed is adjustable on 2 3x MODEL. W ith the slowest shutter speed, users can see objects in a dark environment under 0.2 lux; or see a smooth video image with a higher shutte r speed. The options are from <1/2> to <1/60>. ♦ ANGLE ADJUSTER The item is for adjusting the cam era view angle. The ranges of[...]

53 ♦ APERTURE Under this setup menu, users can adjust the enhancement of the edges of objects in the picture. There are 16 levels of adjustm ent; the options are <01) ~ <16>, <01> represents “no enhanc ement”. When shooting text, this function may help by making them sharper. ♦ MASK DISPLAY In this item, users can set the occ[...]

54 ♦ OFF When the TITLE DISPLAY is set <OFF>, no title will be displayed on the screen even titles are set in advance. B-3-11 TITLE SETTING Up to 16 zone titles can be set with ma ximum 20 characters for each title; two mask zones are allowed to se t in a view area. Users can name the zone titles with privacy mask ID numbers for future reco[...]

55 B-3-12 ALARM SETTING The integrated high speed dome provides eight alarm inputs and two alarm outputs (N.O. and N.C.) to connect alar m devices. W ith this function, dome will cooperates with alarm system to catch the event images. For wiring, please refer to the installation guide a nd/or qualified service personnel. Alarm parameters can be set[...]

56 ♦ ALARM ACTION Select one of these modes that choo se a kind of actions that should be executed when an alarm is triggered. Th e alarm actions can b e set to execute the preset position, sequence, au to-pan or cruise function. ♦ PRESET Select a preset point where the dom e should go when an alarm pin is triggered. SEQUENCE Select a sequence [...]

57 is the HOME function. HOME function allo ws constant and accurate monitoring, to avoid the speed dome stops or missing events. ♦ HOME FUNCTION The item is used to enable or disable the HOME function. ♦ SELECT MODE Select one of the modes that the dome should execute when HOME function is enabled and the RETURN TIME is up. The options are <[...]

58 ♦ GO If HOME function is enabled, the us ers are allowed to execute HOME function manually by se lecting this item. ♦ EXIT Exit the HOME SETTING menu. B-3-14 SEQENCE The function executes pre-positionin g of the pan, tilt, zoom and focus features in a certain sequence for a camera. Before se t up this function, us ers must setup at least two[...]

59 setup speed range is from 1 ~ 15. Refer to below table for more information. P AN (degree/sec.) TIL T (degree/sec.) Speed 1 10 8 Speed 2 23 12 Speed 3 35 22 Speed 4 45 30 Speed 5 55 40 Speed 6 65 50 Speed 7 75 58 Speed 8 185 185 Speed 9 205 210 Speed 10 225 240 Speed 1 1 250 275 Speed 12 280 305 Speed 13 320 335 Speed 14 365 365 Speed 15 400 400[...]

60 ♦ AUTOPAN LINE There are four sets of auto-pan line s built in speed dom e camera. Users are able to command the speed dom e camera to do continuously panning without limit by setting the start point the same as endpoint. ♦ START POINT Follow the description to set the start position of the AUTOPAN path. 1. Move the cursor to <START POIN [...]

61 ♦ SPEED The item is for defining the speed dome cam era rotation speed while running auto-pan. Th e speed is adjustable from 1 to 4; ref er to the table below for details. P AN (degree/sec.) Speed 1 10 Speed 2 23 Speed 3 35 Speed 4 45 ♦ RUN AUTOPAN After the setting is completed, select this item to manually execute the Auto-pan function. ?[...]

62 ♦ RECORD START Follow the description to record the CRUISE path. 1. Rotate the speed dome cam era to a de sired view area. The percentage of the memory buf fer will be displayed on the scree n. 2. Pan, tilt the dome camera to f o rm a path. The zoom setting is only available with 18x MODEL . ♦ RECORD END The cursor will be moved RECORD E ND [...]

63 ♦ ON Select the item to remove the IR cut f ilter . ¾ 23x MODEL ♦ AUTO The internal circuit will automatically decide the occasion to remove the IR cut filter according to the im age brightness level. THRESHOLD The speed dome will remove the filter imm ediately when the threshold value is reached. The threshold options are <LOW >, <[...]

64 ♦ DETECT MODE Four alarm detect modes are prov ided for different application. INT . FOCUS The alarm will be triggered if the inte rnal focus changes; and if the focus returns to the original po sition, the alarm will stop. FIX FOCUS If focus movem ent is detected, the alarm will be triggered, an d the alarm stops when focus returns to the ori[...]

65 ♦ WDR SWITCH Enable or disable the WDR function with the item. ♦ WDR FUNCTION The item is used to define the WDR function mode. AUT O If select <AUTO>, the speed dom e camera operates the W DR function automatically . MANUAL Users are allowed to adjust WDR fu nction manually by defining the RATIO LEVEL, SHUTTER SPEED and IRIS OFFSET va[...]

66 ¾ 18x MODEL ♦ PRIVACY SWITCH User can enable or disable the Priv acy Mask function through this item. ♦ TRANSPARENCY The colour of privacy mask can be se t as transparent related to background image. Select <ON> to display transparent m asks. ♦ COLOUR The colour of privacy mask can be set through this item. The available colours are[...]

67 H SIZE (00 ~ 80) User can adjust the horizontal size of privacy mask through this item. Set the H and V size to 0 can also delete the selected mask. V SIZE (00 ~ 60) User can adjust the vertical size of pr ivacy mask through this item. Set the H and V size to 0 can also delete the selected mask. ♦ EXIT Exit this page. ¾ 23x MODEL ♦ PRIVACY [...]

68 H CENTER(000 ~ 256) The original center of mask zone is th e center of screen. User can move the center of mask zone to another position through adjust this value. V CENTER(000 ~ 256) The original center of mask zone is th e center of screen. User can move the center of mask zone to another position through adjust this value. H SIZE(000 ~ 127) U[...]

69 B-3-21 TIME FUNCTION The item is used to set the TIME related param eters of the integrated high speed dome. ♦ TIME DISPLAY Select <ON> to display the T ime in form ation on screen, or <NO> not to display . ♦ YEAR / MONTH / DAY The items are for setting up the system date. ♦ HOUR / MINUTE This items are for setting up the syste[...]

70 ♦ SCHEDULE SWITCH Select <ON> to enable the Schedul e function or <OFF> to disable. ♦ SCHEDULE POINT Users are allowed to set up 32 schedule points. ♦ SCHEDULE HOUR / MINUTE The items are for setting up the time of schedule points. ♦ SCHEDULE MODE This is for setting the Schedule function of the selected schedule point; the o[...]