AG Neovo LK1800 инструкция обслуживания

Programmable QWERTY Keyboard 120 key programmable alphanumeric keyboard USER MANUAL LK1800 series[...]

2 LK1800 User Manual Rev. 1 NOTICE The manufacturer of the POS programmable keyboard makes no representations or warranties, either expressed or implied, by or with respec t to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages. Inform[...]

3 LK1800 User Manual Rev. 1 TABLE OF CONTENTS FEATURES………………………… ………………………………............. 4 CARTON CONTENTS………………………… …………………………... 5 MODELS………………………… …………………………… ……………... 5 HARDWARE CONNECTIONS……………… [...]

4 LK1800 User Manual Rev. 1 FEATURES • 132 key, programmable alphanumeric keyboard • Optional integrated credit card reader • All 132 keys are programmable; 44 keys are relegendable with transparent key caps • Multiple layers of key definitions and multiple shift levels • Keylock switch for layer selection • Programmed with a powerful W[...]

5 LK1800 User Manual Rev. 1 CARTON CONTENTS LK1800 1. Programmable Keyboard LK1800 series 2. Computer interface cable - RJ11 to male PS/2 mouse and keyboard interface (For LK1800U models: RJ45 to USB Type A interface) 3. Programming Utility software and User’s Manual disk 4. Legend label sheet 5. 2 keylock keys MODELS LK1800 - LK1800 with PS2 int[...]

6 LK1800 User Manual Rev. 1 HARDWARE CONNECTIONS The LK1800 can be connected to a PS/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the com puter and standard keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.). NOTE: Before making any connections it is always advisable to turn o[...]

7 LK1800 User Manual Rev. 1 FUNCTIONAL TEST For testing purposes, your LK1800 keyboard was pre-programmed with a key definition template called LK1800-L1.tpl. The following simple steps will verify that the keyboard is in good working condition: 1. Follow the Hardware Connections directions on page 6 in this manual to connect the LK1800 to your com[...]

8 LK1800 User Manual Rev. 1 UTILITY DISK CONTENTS All LK1800 keyboards come with a utility software disk. This disk contains several important files: SETUP.EXE This utility will install the keyboard programming utility on your computer. Use this utility with the keyboard attached. LK1800-L1.TPL LK1800-L2.TPL These templates were pre-programmed into[...]

9 LK1800 User Manual Rev. 1 INSTALLING THE LCI KEYB OARD PROGRAMMING UTILITY 1. Make sure the LK1800 is attached to the computer. 2. Double click the SETUP.EXE file on the utility diskette. 3. Select the destination folder if necessary and click “Install” to start the installation process. Skip any warning messages by clicking “Yes” or “C[...]

10 LK1800 User Manual Rev. 1 MENU COMMANDS [Template] [New] Clear all key definitions. [Load] Load key definitions from template file on disk. (*.TPL) [Save] Save key definitions to template file on disk. (*.TPL) [Save As] Save key definitions to template file on disk with new Filename. (*.TPL) [Load Default] Load key definitions from default templ[...]

11 LK1800 User Manual Rev. 1 PROGRAMMING THE KEYBOARD 1. Connecting the Keyboard For PS/2 versions: Connect the LK1800 to the PC with the special interface cable provided. Plug the standard PC keyboard to the female PS/2 connector on the interface cable and the male PS/2 connector to the computer. For USB versions: Connect the LK1800 to any USB por[...]

12 LK1800 User Manual Rev. 1 EDITING KEY DEFINITIONS 1. Selecting Keys to Edit Use Shift Key and the Arrows Keys on the standard keyboard to select the key for editing. Hold down the shift key and hit the arrow keys until the key to be edited is being highlighted. 2. Checking Key Definitions The current key definition is shown on the single line ?[...]

13 LK1800 User Manual Rev. 1 • For special function keys, use <ESC> and <Function Key> to enter their scan code in this mode. For example, to program <F9> into the key position, hit <ESC> first, followed by <F9>. To program <ESC>, hit <ESC> twice. • Since the following 4 keys are used by Windows, we can[...]

14 LK1800 User Manual Rev. 1 o [ShiftLevel*] Multi-shift-level function key definition for different shift levels (* is from 1 to 9). To define a Multi-shift-level function key, click on the icon and enter the level number. • Decimal equivalent numeric values for ASCII codes (only 1 to 240 allowed) can be entered directly by clicking on the icon [...]

15 LK1800 User Manual Rev. 1 [ShiftLevel2] key and then press the multi-definition key will send out Level 2 definition, and so on. B. Inter-string Delay • A delay time up to 100 seconds can be inserted between key stroke outputs by clicking on the icon on the tool bar or Key Edit → Insert Delay Time on the menu bar. For example inserting [Dela[...]

16 LK1800 User Manual Rev. 1 MODIFYING PRO PERTI ES OF THE KEYBOARD After key definitions are finished, click on the item Configuration → Config KB Properties on the menu bar or click on the “Modify Properties” icon on the toolbar to set or change programmable keyboard features. Config OPOS/JPOS • You may configure the keyboard according to[...]

17 LK1800 User Manual Rev. 1 DELIMITED TEXT TEMPLATE FILE The new programmable keyboard utility can import and export a delimited text file directly. The text file may have two columns and as many rows as number of keys (See the example .TXT file in the utility diskette). Columns are delimited by commas and rows are delimited by <Enter>. The [...]

18 LK1800 User Manual Rev. 1 KEY LABEL COLOR To identify the status of a key during template editing, the key label is displayed in three different colors. • Black - The key is blank with no definition. • Blue - When a template is loaded from file or read from keyboard, all keys that are not blank will be displayed in blue. • Green - When a k[...]

19 LK1800 User Manual Rev. 1 In this example of the LK1800 template, the F33 key is a defined key and is indicated by the color blue. In this example of the LK1800 template, the F33 key is a modified key and is indicated by the color green.[...]

20 LK1800 User Manual Rev. 1 PROGRAMMING EXAMPLES 1. Special Features To program key sequence <Ctrl-A> then <F9>, the <Ctrl> key need to be released before pressing <F9>. Otherwise, the definition will be interpreted as <Ctrl-A>, <Ctrl- F9>. • [Ctrl][A][0F0][Ctrl][F9] 2. Multi-Shift-Level Function This function[...]

21 LK1800 User Manual Rev. 1 TOKEN NAMES FO R SPECIA L FUNCTION KEY S There are no ASCII codes for some function keys. They have to be programmed with Scan Codes. In key definitions, the following symbols represent their scan codes. The token name symbols are case sensitive. They have to be entered exactly as shown below. Symbol: Function Key’s N[...]

22 LK1800 User Manual Rev. 1 [Alt+PrintScreen] Function key <Alt>+<Print Screen> [PAD0] number key <0> on keypad [PAD1] number key <1> on keypad [PAD2] number key <2> on keypad [PAD3] number key <3> on keypad [PAD4] number key <4> on keypad [PAD5] number key <5> on keypad [PAD6] number key <6> o[...]

23 LK1800 User Manual Rev. 1 EDITING MSR PARAMETERS (for keyboar ds equipped with optional MSR) Before editing the parameters, please refer to the user manual of the Point-of-Sale software or credit card verification software to find out what are the requirements on the output format. To configure the MSR from the KBWN.exe utility, click the Config[...]

24 LK1800 User Manual Rev. 1 1. Edit the keyboard programming template; or load a template from a file; or read the template from the keyboard. In the programming utility main menu, click Configuration on the menu bar and then click on [ Edit MR Data ]. You can also click the “MR data edit” icon on the tool bar. The MSR parameter edit dialog bo[...]

25 LK1800 User Manual Rev. 1 Enable LRC: enable LRC output for each track. If enabled, LRC will be sent as 2 hex characters. Hex values A to F (10 to 15) are represented by characters : ; < - > and ? respectively. 7. Enable Start Sentinel: enable individual track "start sentinel" o utput. Enable Separator: enable individual track &q[...]

26 LK1800 User Manual Rev. 1 SPECIFICATIO NS[...]