Allied Telesis AT-FAN01 инструкция обслуживания

Installation Guide Remo vable P o w er Supply and F an A T -PWR01 A T -PWR02 A T -PWR05 A T -F AN01 A T -F AN03[...]

Remo vable P o wer Suppl y and F an Installation Guide AT - P W R 0 1 AT - P W R 0 2 AT - P W R 0 5 AT - F A N 0 1 AT - F A N 0 3 Download the complete document set fr om www .alliedtelesis.com/suppor t/software[...]

Removable P ow er Supply and Fan 2 Removable P ower Supply and Fan Installatio n Guide Document Number C613-04057-00 REV L © 2008 Allied T elesis, Inc. All rights r eserved. No part of this publication ma y be repr oduced wit hout prior written permissi on fro m Allied T elesis, Inc. Allied T elesis, Inc. reserves the right to change specification[...]

Installation Guide 3 Contents About this Guide ........................................... ..................... .................... .......................... 4 Compatible Switches .............................................. ..................... .................... ................ 4 Package Contents ........... ..................... .......[...]

Removable P ow er Supply and Fan 4 About this Guide This Installation Guide de scribes how to install the f ollowing PSUs and fans: ■ A T -PWR01 PSU , either A C or DC power suppl y unit ■ AT - P W R 0 2 P S U , A C o n l y ■ AT - P W R 0 5 P S U , A C o n l y ■ A T -F AN01, fan-only module ■ A T -F AN03, chassis fan module Compatible Swi[...]

Installation Guide 5 P acka ge Contents Depending on the model, switches are shipp ed with a single supply unit (PSU), either A C or DC . Some models also ha v e fan-onl y modules (FOM), chassis f an modules, or blanking plates. ■ The A T -8948, A T -9924Ts, x900-24XT , x900-24XT-N, and x900-24XS switches ha ve a PSU and a FOM installed. ■ The [...]

Removable P ow er Supply and Fan 6 Installing a P o wer Suppl y Unit or F an Use these instructions to install PSUs, chassis fan mo dules and FOMs. ■ Do not combine PWR01 and PWR02 PSUs in the sa me switch. ■ Do not combine A C and DC PSUs in the same switch. Befor e y ou begin ■ Read the safety information f or the switch. Safety inf ormatio[...]

Installation Guide 7 Installing a PWR01, PWR02, or F AN01 1. If you a re r eplacing a PSU, disconnect the po w er cord fr om the currently installed PSU befor e r emovin g it. For A C PSUs, turn off the main po w er sour ce to the PSU and disc onnect the pow er cord. For DC PSUs, push the Run/Standby contr ol and r elease it to the Off position. Wh[...]

Removable P ow er Supply and Fan 8 Installing a PWR05 or F AN03 1. If you a re r eplacing a PSU, turn off the main pow er sour ce to th e PSU and disconnect the pow er cor d befor e r emoving it. The DC eart hing connection is not necessar y for the SwitchBlade x908 when using A C PSUs because the ch assis is gr ounded t hr ough the p ow er cor ds.[...]

Installation Guide 9 Connecting an A C po w er suppl y Follow these instructions to connect an A T-PWR01, A T-PWR02, or A T-PWR05 A C PSU to an A C powe r supply: Wa r n i n g The A T-PWR01 A C PSU has a fuse rating of 2 50 V , 5 A for FH1 01 and FH102. Wa r n i n g The A T-PWR01 A C PSU has double pole/neutral fusing. Electric shock is possible si[...]

Removable P ow er Supply and Fan 10 3. Connect the po wer cord to the main po we r sour ce. 4. Check that the Run/Standby s witch is set to the Run position (1). Both the A C and DC LEDs should be lit. Note that when the Run/Standby switch is set to the Standby position (0), the A C LED lights and the fan spins, but the DC LED does not light and th[...]

Installation Guide 11 Connecting a DC po wer suppl y Follow these instructions to connect an A T-PWR01-80 DC PSU to a DC power supply . Only trained and qualified p erso nnel sh ould connect a DC pow er suppl y . Y ou need an appropriate DC po wer sour ce, DC supply cable, ring connectors, a crimp tool and an a ppr opriate scr ewdriver to tighten t[...]

Removable P ow er Supply and Fan 12 5. Ensure ther e ar e no exposed cable strands. 6. Replace the co ver . Y ou must replace the transparent plastic te rminal cover befor e contin uing. 7. Secur e the supply cabl e to the rack frame w ork or a similar object to ensur e that connections ar e iso lated fro m any f or ce a pplied to the cable. 8. Ens[...]

Installation Guide 13 Checking LEDs LEDs on PSUs, fans, and the fr ont panels o f switches in dicate the operationa l status of the devices. Aft er you ha ve installed a PSU or fan and ha ve po wer ed on the switch, c heck the LEDs to v erify operation by using the f ollowing tables. PWR01 PWR02 The follo wing table describes LEDs o n the PWR01 and[...]

Removable P ow er Supply and Fan 14 Switch The follo wing table describes how LEDs on the swi tch re port operations and faults with installed PSUs and FOMs. LED State Description PSU 1 and PSU 2 Green The PSU is installed and supplying po wer to the s witch. The vo ltage output is with in specification. Red One of the f ollowing: • The PSU is in[...]

Installation Guide 15 Remo ving a P o wer Suppl y Unit or F an Follow these instructions to remo ve a PSU , chassis fan module or FOM. Befor e y ou begin ■ Read the safety information f or the switch. Safety inf ormation is in the x900 Ser ies Switc h and Switc hBlade ® x908 Installation and Safety Guide . Y ou can download th is document fr om [...]

Removable P ow er Supply and Fan 16 T r oub leshooting If the PSU does not function as expected: ■ Check that all cable connections ar e corr ect and secur e. ■ On the PWR01 DC model, chec k that the Run/Standb y switch h as been presse d and is in the On position. ■ On the PWR05 A C model, check that the Run/Standb y switch has been set to R[...]

Installation Guide 17 Obtaining Documentation and Resour ces The complete docume nt set for x900 Series switches and SwitchBlade x908 includes: ■ this Installation Guide ■ the x900 Ser ies Switc h and Switc hBlade ® x908 Installation and Saf ety Guide , which describes ho w to install t he switch and includes important safety and statutor y in[...]

Removable P ow er Supply and Fan 18 A T -TFTP Ser ver for Windows is a TFTP ( T r ivial File T ransfer Pr otocol ) server for transferrin g softwar e v ersions, configurat ion scripts and other files betw een a PC and the switc h. Y ou download A T -TFTP Ser ver fr om www .alliedtelesis.com/support/softwar e . CD-R OM Some pr oducts also ship with [...]

Installation Guide 19 Standards Pr oducts in this document meet the follo wing standar ds: Category Appro val Agency and Requir ement UL60950-1 CAN/CSA-C22.2 No. 609 50-1-03 EN60950-1 AS/NZS 60950.1 Electr omagnetic Complia nce FCC CFR47 Part 15 Class A EN55022 Class A VCCI Clas s A AS/NZS CISPR22 Class A CNS 13438 Class A EN61000-3-2/ 3 Immunity E[...]

Removable P ow er Supply and Fan 20 EC Declaration of Conformity We : ALLIED TELESIS LABS LIMITED 27 NAZARETH A VENUE CHRISTCHURCH 802 4 NEW ZEALAND Declare unde r our sole legal responsibil ity that these pro ducts: A T -PWR01, A T -PWR01-80, A T -PWR02, and A T -PWR05 Po w er Supply Units Are in conformity w ith the essential r equir ements o f d[...]