Anetsberger Brothers 14GS 14GU инструкция обслуживания

1 Anetsber ger Br others, Inc. 180 North Anets Drive • Northbrook, Illinois 60062 • 847-272-0770 • Fax 847-272-1943 For ANETS Factory W arranty Service • 800-837-2638 Installation, User Operation, & Maintenance Manual Keep this Manual in a Convenient Location for Reference W ARNING After installation of this equipment, immediately conta[...]

2 CONTENTS Shipping Container Inspection ........................................................ 3 Fryer Gas Supply Specifications ..................................................... 4 Fryer Electrical Specifications ....................................................... 4 Figure 1 - Fryer Model 14GS W iring Diagram ....................... 4 Co[...]

3 1 . Carefully examine the shipping carton for external damage. When damage is noted, notify the delivery carrier immediately . Save all packing materials for damage claim examination. 2. If no external damage is noted, remove the shipping carton from the fryer and examine the SHIPPING CONT AINER INSPECTION fryer carefully for damage. Place the fr[...]

4 Figur e 1. Fr yer Model 14GS W iring Dia gram Figure 1 is a wiring diagram of an ANETS 14GS Fryer . Some fryers may have other options that do not appear in this basic wiring diagram. A model-specific wiring diagram included with each fryer shows all the actual parts and their associated wiring connections. In addition, a fryer equipped with a bu[...]

5 IMPOR T ANT : Read the Code Requir ements and ALL installation instructions car efully , befor e starting the installation. Contact the factory if any pr oblems or questions arise. The fryer installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 (latest edition); the Natural Gas [...]

6 Install the fryer in accordance with the preceding Code Requirements, as well as the following Installation Requirements. 1. DO NOT install this fryer in a mobile home, trailer , or recreational vehicle. 2. Install this fryer in a location that allows it to be moved away from other adjacent appliances for cleaning and maintenance. NOTE: If the fr[...]

7 Figure 3. Typical Leg Installation INST ALLA TION INSTR UCTIONS 7 . T ighten the four locking nuts evenly and securely to hold the leg mounting plate against the fryer mounting bracket. LEG INST ALLA TION INSTRUCTIONS (Continued) LEG LEVELING INSTRUCTIONS 1. Move the fryer to its desired location. WARNING The fryer MUST NOT tip, rock or wob- ble,[...]

8 CASTER LEVELING INSTRUC- TIONS 1. Move the fryer to its desired location. 2. Determine whether the fryer tends to wobble or rock when in its desired location. If it does not, perform step 10, then proceed to the Fryer Operating Instructions. If it does, perform steps 3 through 9. WARNING The fryer MUST NOT tip, rock or wob- ble, to avoid splashin[...]

9 CASTER LEVELING INSTRUC- TIONS (Continued) 5 . Completely unscrew the bolts holding the caster mounting plate that requires leveling adjustment. Retain the locking nuts for later reassembly . 6 . Reinsert each bolt through its flatwasher and the fryer mounting bracket; next, place a spacer of the required thickness on the bolt before inserting th[...]

10 GAS CONNECTION INSTRUCTIONS Installing your ANETS Fryer requires the fol- lowing procedure, after its legs or casters are pro- perly attached and it is in its desired location. 1. Ensure that the gas control valve knob in the fryer has its OFF position next to the valve mark. 2 . Ensure that the gas supply inlet line valve is closed (cross-wise [...]

11 FR YER OPERA TING INSR UCTIONS D ANGER A void moving the fryer while it contains HOT shortening. Drain the shortening from the fryer before moving it for service, clean- ing or maintenance to avoid spilling or splashing. Burns from hot shortening can cause serious injury or death. A. An ANETS Fryer is designed for opera- tion with a kettle fille[...]

12 FR YER PREP ARA TION FOR USE “BOIL OUT” INSTRUCTIONS New ANETS Fryers are leak-tested and cleaned at the factory before shipping. Before using a newly installed fryer for food preparation, clean the kettle again, as follows: 1. Thoroughly wipe the interior of the kettle with clean cloths. Open the front door on the lower portion of the fryer[...]

13 NOTE: The gas line of a new fryer installation may contain a considerable amount of air that will hinder immediate lighting. Y ou may have to press in the gas safety valve control knob as long as several minutes before the pilot flame burns steadily . 1. Ensure that the fryer ’ s thermostat knob is set to OFF . 2. Open the gas supply line inle[...]

14 NOTE: Shutdown is recommended at the end of a workday or whenever no frying is required for a period of several hours. The fryer should be shutdown during any power outage or interruption of gas service. The fryer MUST also be shutdown before draining the kettle, or whenever there is no shortening in the kettle to prevent damage. 1. T urn the th[...]

15 FR YER OPERA TING INSTR UCTIONS (Contin ued) Load the fryer basket with the food pr oduct while the basket is not in the hot liquid shortening. DO NOT overload the fryer basket. Load only a pr emeasur e d quantity of food pr oduct ( 1½ lb, typically; less, if smaller portions ar e desir ed). Place the loaded fryer basket into the hot liquid sho[...]

16 DAIL Y CLEANING PROCEDURE NOTE: Cleaning is recommended at the end of a workday , to prepare the fryer for proper operation the next time it is to be used. D ANGER DO NOT move the fryer while it contains HOT shortening. Allow it to cool and drain the shortening from the fryer be- fore moving it for service, cleaning, or maintenance to avoid spil[...]

17 NOTE: Regular maintenance is recommended to keep the fryer operating properly . Once each month, before beginning fryer opera- tion, check the flue (behind the backsplash panel) to ensure that it is clear , enabling exhaust combus- tion gases to flow freely toward the ventilation hood area. DO NOT allow the flue to become excessively dirty . NEV[...]

18 FR YER TROUBLESHOO TING GUIDE PROBLEM CA USE REMED Y All service (repairs or part replacement) must be performed by a qualified Service Agency . Pilot flame does not stay lighted. 1. Dirty/sooty pilot burner . 2. Low gas supply pressure [less than 6 ” W .C. for natural gas; (1 1 ” W .C. for pro- pane) when all other gas-powered equip- ment i[...]

19 FR YER TR OUBLESHOO TING GUIDE (Continued) PROBLEM CA USE REMED Y Pilot flame goes out repeatedly . 1. Low gas supply pressure [less than 6 ” W .C. for natural gas; (1 1 ” W .C. for pro- pane) when all other gas-powered kitchen equipment is operating]. 2. Loose thermocouple or high-limit thermo- stat connection(s) on gas control valve. 3. Pi[...]

20 FR YER TR OUBLESHOO TING GUIDE (Continued) PROBLEM CA USE REMED Y Main burners do not ignite. 1. Gas control valve knob set to OFF or PILOT . 2. Low gas supply pressure [less than 6 ” W .C. for natural gas; (1 1 ” W .C. for pro- pane) when all other gas-powered kitchen equipment is operating]. 3. Pilot burner problem. 4. Thermostat control s[...]

21 FR YER TR OUBLESHOO TING GUIDE (Continued) PROBLEM CA USE REMED Y Main burners do not stop burning. 1. Thermostat has failed. 2. Gas control valve has failed. 1. T urn the thermostat control knob to OFF . If the burners do not quit burning, the ther- mostat has failed and must be replaced. 2. T urn the gas control valve knob to OFF . If the burn[...]

22 FR YER TR OUBLESHOO TING GUIDE (Continued) PROBLEM CA USE REMED Y Liquid shortening does not reach the desired temperature for frying. (Continued) 3. (Continued) the shortening temperature has stabilized. Measure the temperature of the shortening by inserting an accurate thermometer about 4 inches into the shortening to measure its temperature. [...]

23 LIMITED W ARRANTY ANETSBERGER BROTHERS, INC., Northbrook, Illinois, USA, certifies that all equipment of its manufacture is, to the best of its knowledge, free from defective material and workmanship. ANETSBERGER BROTHERS, INC., agrees to replace any integral part of its equipment that proves defective within 15 months of date of original shipme[...]

24 Anetsber ger Br others, Inc. 180 North Anets Drive • Northbrook, Illinois 60062 • 847-272-0770 • Fax 847-272-1943 T oll-fr ee Customer & W arranty Service: 800/ 837-2638 www .anetsberger .com Keep this Manual in a Convenient Location for Reference Form I-102; Rev . 10/01 Price $20.00 US[...]