Casablanca Fan Company 54007 инструкция обслуживания

www .CasablancaF anC o.com 1.888.227.2178 Congratulations on purchasing your new Casablanca® ceiling fan! It will provide comfort and per formance in y our home or ofce for man y years. This installation and operation manual contains complete instructions for installing and operating your fan. W e are proud of our work and appreciate the opport[...]

www .CasablancaF anC o.com 1.888.227.2178 M6004-01 • 08/13/12 • © Casablanca F an Company www .CasablancaF anC o.com 1.888.227.2178 1.888.227.2178 What t o Expec t with Y our Installation Know your wiring If you are unfamiliar with wiring, use a qualied electrician. Y ou may need a friend to help you. Check box to see fan weight Assess loca[...]

www .CasablancaF anC o.com 1.888.227.2178 T ools Needed Ladder Po wer Drill (optional) 9/64” Drill Bit (optional) Screwdrivers Pliers Wire Strippers If mounting to a support structure, you will also need these tools . 3 M6004-01 • 08/13/12 • © Casablanca F an Company[...]

www .CasablancaF anC o.com 1.888.227.2178 If you ha ve an angled ceiling: 1. Y ou will need a longer downrod (sold separately) . 2. If your ceiling angle is greater than 34°, y ou will also need an Angled Mounting Kit (sold separately) . Guide T ouches BOTH Ceiling & Wa ll S I T U A T I O N 1 Guide T ouches W all but NOT Ceiling S I T U A T I [...]

1.888.227.2178 www .CasablancaF anC o.com C eiling Bracket Installa tion OFF Make sure all four (4) bumpers are still attached . F or angled ceilings, point opening toward peak. Refer to warning w .1 on pg. 2 T o av oid possible elec trical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box[...]

www .CasablancaF anC o.com 1.888.227.2178 C eiling Bracket Installa tion (continued) Prepar ation D I S C A R D K E E P ! Remove the shipping blocks fr om the motor . Sav e the ve scre ws. The y will be needed for blade iron installation. 1.888.227.2178 www .CasablancaF anC o.com Time Sav er Tip: Get a helper to insert grommets, found in the har[...]

1.888.227.2178 Downrod Slid e Slid e 1 2 3 4 5 6 7 8 9 10 Sold Separately Included Longer Downrod for angled ceilings or ceilings 10’ or higher Shorter Downrod for fans installed close to ceiling Standard Downrod for ceilings 8-10’ high Option 1 Option 2 Option 3 skip to next page If you need a diff erent downrod length follo w these steps: Ste[...]

KEEP! 8” 3/8” C U T & S T R I P (not to scale) Remove the pr e-installed setscrew so that the downrod can be inserted. Hand tighten the downrod (at least 4-5 full turns) until it stops. The wires can be cut, but leave at least 8” extending from the top of the downr od. Downrod (c ontinued) 8” 3/8” Tighten the setscrew with pliers. DO [...]

www .CasablancaF anC o.com 1.888.227.2178 9 M6004-01 • 08/13/12 • © Casablanca F an Company Downrod (c ontinued) Put the wires and do wnrod through the canopy . Let the canop y sit loosely on top of the fan. DO NO T PICK THE F AN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket.[...]

www .CasablancaF anC o.com 1.888.227.2178 Wiring F R O M F A N F R O M C E I L I N G B R A C K E T F R O M F A N Using an orange wire connector from the hardware bag , connect the 3 grounding wires (green, green/ yellow stripe , or bare copper) coming from the ceiling , downrod, and hanging bracket. (Grounding) Green/Y ellow Stripe Green/Y ellow St[...]

www .CasablancaF anC o.com 1.888.227.2178 11 M6004-01 • 08/13/12 • © Casablanca F an Company Canop y Lift the canopy into place so that the screw holes are aligned . Position the canop y so that, when lifted into place , the canopy ts into the hanging bracket as shown. Screw Holes Insert the two canopy screws found in the hardwar e bag. No [...]

www .CasablancaF anC o.com 1.888.227.2178 M6004-01 • 08/13/12 • © Casablanca F an Company Blades Insert grommets found in the hardware bag into the holes in the blades, then secure each blade to a blade iron with screws found in the hardw are bag. Lightly attach the blade irons to the motor with screws found in the hardware bag , then securely[...]

www .CasablancaF anC o.com 1.888.227.2178 S witch Housing F eed the wire plug through the center hole of the upper switch housing , then wrap keyhole slots around the screws and twist counterclockwise. Screw two (2) housing assembly screws from the hardware bag halfwa y into the motor housing . I t does not matter which two screw holes you choose .[...]

www .CasablancaF anC o.com 1.888.227.2178 Connect the plugs from the upper and lower switch housings . Mak e sure to line up the colored markings on the connectors. Lift the lower switch housing up until the holes line up with the screw holes in the upper switch housing . Light Kit Remove the socket rings from the sockets. Install the shades onto t[...]

www .CasablancaF anC o.com 1.888.227.2178 Light Kit (c ontinued) C ONGRA TULA TIONS! Y OU’RE DONE! Insert three (3) switch housing screws found in the hardware bag . Install the CFL bulbs into the sockets. When necessary , replace with bulbs of same wattage. No te: Glass shade styl e and number of lights may vary. See next page for fan opera tion[...]

www .CasablancaF anC o.com 1.888.227.2178 M6004-01 • 08/13/12 • © Casablanca F an Company 16 Maintenanc e & Cleaning The pull chain controls the fan: high, medium, low , extra low , and off . The light pull chain controls the power to the light xture: on and off . T o switch the direc tion of air ow , mov e the reverse switch to the [...]

www .CasablancaF anC o.com 1.888.227.2178 17 M6004-01 • 08/13/12 • © Casablanca F an Company T roubleshooting Exc essive wobbling • Tighten all of the blade and blade iron screws until they are snug . • T urn the power off , support the fan carefully , and check that the hanger ball is properly seated . • Use the provided balancing kit a[...]