Gravely 911411 WAW 34 инструкция обслуживания

Owner/Operat or Manual Manuel du Propriétai re/Utilisateur Models 91 141 1 – W A W 34 Wide Area W alk Mo wer 01326300 12/09 Printed in USA ENGLIS H FRENCH[...]

GB - 2 Safet y . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Assembly . . . . . . . . . . . . . . . . . . . . . . . . 9 Controls a nd Fe a t ure s . . . . . . . . . . . . . 1 1 Operati on . . . . . . . . . . . . . . . . . . . . . . . 1 2 Maintena n ce . . . . . . . . . . . . . . . . . . . . . 16 Service a nd Adju stment s . . . . . . . . [...]

GB - 3 • Record Unit Model and Serial numbers here: • Record Engine Model & Serial numbers here: PRODUCT REGISTRA TION The Gravely dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All c laims meeting requirement[...]

GB - 4 SAFETY ALERTS Look for these symbols to point out important safety precautions. They mean: Attention! Personal Safety Is Invo lved! Become Al ert! Obey T he Mes sage! The safety alert symbols above an d signal words below are used on decals and in this manual. Read and understand all safety messages. NOT A TIONS NOTE: General reference inf o[...]

GB - 5 SAFETY DECALS AND LOCA TIONS AL WA YS replace missing or damage d safety decals. Refer to Figure 2 for safety decal locations. 1. DANGER! TO A VOID SE RIOUS INJUR Y OR DEA TH 05365400A + 1 Figure 2 1 2 3 4 5 Read the operator ’s manual. Keep children and others away from unit while operating. Never direct discharge toward other people. Thr[...]

GB - 6 2. W ARNING! 3. DANGER! ROT A TING P ARTS 4. DANGER! KEEP HANDS AND FEET A W A Y Do not opera te mower unless guard s are in operating position or bagger is att ac hed. 5. W ARNING! SAFETY RULES If unit is to be used by someone other than original purchaser; loaned, rented or sold, AL WA YS pro vide this manual and any needed safety training[...]

GB - 7 Keep children out of the work area a nd under the watchful care of a responsible adult . AL WA YS operate unit when there is good visibility and light. DO NOT mow wet grass. AL WA YS be sure of your footing. Keep a firm hold on handlebar . W a lk, NEVER run. Engine/blade control feature on mower stops engine and blade within 5 secon ds whene[...]

GB - 8 On self-propelled models, releasing wheel drive control m ust stop mower ’s forward movement. If this feature fails to operate, disconnect spark plug wire an d repair before using unit. On self-propelled models, wheel drive must be disengaged when starting engine. DO NOT operate on steep slopes. NEVER leave unit unattended on a slope. Choc[...]

GB - 9 An extension spring, when extended, stores energy and can be dangerous. Always use tools specifically designed for instal ling or removing an extension spring. Always compress or extend springs slowly . Before tipping unit, remove fuel. Use extra care when loading or unloading unit onto trailer or t ruck. Ensure all wheel blocks, jack stands[...]

GB - 10 ASSEMBL Y 1. Remove all packing materials and straps from unit. 2. Remove one pair of nuts and bolt s from the handlebars. 3. Rot ate the handlebar int o the operating position and c onnect the two braces to the handlebars. 4. Replace the nut s removed in step 1 and then tighten all f our nuts. 5. Check engine crankcase oil level. See engin[...]

GB - 11 1. PT O Clutch Lever 2. Parking Brake Release Lever 3. Forward Drive Control 4. Reverse Drive Control 5. Handlebars 6. Fuel T ank and Cap 7. Height Adjustment S pacers 8. Muffler 9. Oil Fill/Dip s tick 10. Air Filter 1 1. F uel Filter 12. Belt Cover 13. Ignition Key 14. Safety St art Switch 15. Throttle/Choke Control CONTROLS AND FEA TURES [...]

GB - 12 CONTROLS AND FEA TURES See Figure 6 for locations. Park ing Br ake Le ver ( Right H and Lever) Hold the parking brake l ever against the handlebar to release the wheel lock pin and operate the unit. Release the parking brake lever to engage wheel lock pin and pr event the unit from rolling forward or backward. IMPORT ANT : The wheel lock pi[...]

GB - 13 Align the open ends of the spacers with the flats on the caster s pindle and remove the spacers one at a time until enough are left at the bottom for the desired cutting height. Remove the lock pin while supporting the caster arm. Lower the arm on top of the remaining spacers. Put the spacers that were removed in the caster spindle above th[...]

GB - 14 Forward Drive Control (Lower Right Hand Control) NOTE: Engine must be running for wheel drive to propel unit. T o drive forward: Hold the parking brake l ever against the handlebar and slowly sq ueeze and hold the forward drive contro l. Hold the forward drive control against the handlebar for f astest speed. T o stop: Release forward dr iv[...]

GB - 15 IMPORT ANT : Excessively oxygenated or reformulated fuels (fuels blended with alcohols or ethers ) can damage the fuel system or caus e performance problem s. If any undesirable operating problems occur , use a gasoline with a l ower percent age of alcohol or ether . Fuel S tabiliz er Gasoline left in the fuel sy stem for extended periods w[...]

GB - 16 Gravely Dealers will provi de any service, parts or adjustments which may be required to keep your unit operating at peak eff iciency . Should engine require se rvice, contact a Gravely Dealer or an authorized engine manufacturer's service center . MAINTENANCE SCHE DULE NOTE: Some work ing conditions (heavy loads, high ambient t e mper[...]

GB - 17 T o inst all blade: 1. Install mower blades on mow er deck with mounting hardwa re. 2. T orque 5/8-inch nut t o 92 to 130 lbf-ft (125 to 176 N•m ). 3. Connect spark plug wire. Sharpen the Mowe r Blades 1. Remove mower blade from unit. Discard mower blade if: • More than 1/2 in. (1.27 cm) of metal is removed. • Air lift s become eroded[...]

GB - 18 CHECK DRIVE BEL T S Check drive belts and replace if worn or damaged. See Wheel Drive Belts on page 20. CHECK F ASTENERS Check all fasteners for proper tightness. Pay special attention to blade hardware and all guards, shields and safety devices. CHECK AIR CLEANER See engine manual f or specific informa tion. CHANGE ENGINE OIL IMPORT ANT : [...]

GB - 19 PTO CLUTCH 1. T est the PTO clutch adjustme nt. With the clutch disengaged, the blade brake pad should touch the upper pulley . With the clutch engaged, the blade brake pad should not touch the upper pulley and the deck belt should be under tension. 2. Loosen the lock nut on the cable adjuster under the dash panel. 3. Turn the adjuster body[...]

GB - 20 BELT REPLACEMENT Wheel Drive Belt s 1. S top engine, remove key , wait for all moving parts to stop and hot p arts to cool. 2. Raise and support the rear of the unit . 3. Remove the rear cover and disconnect the neutral return springs from the spring anchors. 4. Remove the idler arm from the transmission plate. S ee Figure 15. 5. Remove the[...]

GB - 21 PTO Belt 1. S top engine, remove key , wait for all moving parts to stop and hot p arts to cool. 2. Remove the two drive belts from engine pulley . See Wheel Drive Belts on page 20. 3. Remove the belt cover from the deck. 4. Disconnect the two idler springs from the spring anchors. NOTE: Do not remov e the bolt holding the engine pulley to [...]

GB - 22 SERVICI NG TH E BA TT E RY NOTE: Unit comes equipped with a maintenance-free battery that requires no regular maintenance except cleaning the terminals. Battery Remov al and Inst allation Remove (Fi gure 18) 1. Remove the battery cover. 2. Disconnect negative (–) cable first, then positive (+) cable. 3. Remove battery from unit. Inst all [...]

GB - 23 4. Connect positive (+) c able first, then negative (–) cable. 5. Apply petroleum jelly or dielectric grease to battery cable ends and terminals. 6. Replace belt cover. Charging the B attery Follow First Aid directions for contact wit h battery fluid. • External Contact: Flush with water . • Eyes: Flush with wa ter for at least 1 5 mi[...]

GB - 24 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Engine will not st art 1. Safety switch not held down. 2. Ignition switch is faulty . 3. Wiring har ness fuse is blown. 4. Loos e or corroded battery cables. 5. Discharged battery . 6. Faulty starter . 7. Fuel tank empty . 1. Hold down safety switch while turning the igni tion key . 2. Repla[...]

GB - 25 SER VICE P ARTS Always use genuine Gravely parts t o keep your mow er running like new . Part Number Description 03746500 Blade 03797300 Mulching Blade 07200529 Forward Traction Belt 07200506 Reverse Traction Belt 07243300 PTO Belt 07234300 Deck Belt 21534100 S park Plug ACCESSORIES See your authorized Gravely Dealer to add these optional a[...]

GB - 26 SPECIFICA TIONS Model Number 91 141 1 Descript ion WAW 3 4 Length - in. ( cm) 68.5 (174) Height - in. (cm) 38 (96.5) Width - in. (cm) 36 (91.4) Actual Weight - l bs (kg) 276 (125.2) Cutting Width- in. (c m) 34 (86.3) Cutting Height - in. (cm) 1.75 – 3.5 (4.4 – 8. 9) Engine, 4 cycle Briggs & Stratton Model I/C Governed RPM (May be di[...]

ARIENS COMP ANY GRA VEL Y ® | STENS ® | LOCKE ® | NA TIONAL ® | BYNOR M ® | EVE RRIDE ® | GREA T DANE ® Con_L&G_2010 27 T wo-Y ear Limi ted Lawn and Garden W a rranty This warranty statement applies only to 21-Inch Walk Behind Lawn Mowe rs, Wide Area Walks, AMP Wide Area Walks, Til lers, S t ring T rimmers, Log Splitters, Edgers and Powe[...]

ARIENS COMP ANY GRA VEL Y ® | STENS ® | LOCKE ® | NA TIONAL ® | BYNOR M ® | EVE RRIDE ® | GREA T DANE ® Con_L&G_2010 28 T o find an Ariens or Gravely authorized service repr esentative, con tact Ariens a t: 655 W. Ryan Street Brillion, WI 541 10 (920) 7 56 - 2141 www .a riens.com www .gr avely . com Exceptions and Limitations • Batteri[...]

[...]

GRA VEL Y 655 West Ryan S treet Brillion, WI 541 10-1072 920-756-2141 Fax 920-756-2407 www .gravely . com[...]