Heat & Glo LifeStyle TWILIGHT-II инструкция обслуживания

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 1 Model: T wilight-II* Owner ’ s Manual Installation and Operation * Does not ship with interior or exterior door , or TL-Trim kit. These items must be purchased separately. • Do not store or use gasoline or other flamma- ble vapors and liquids in the vicinity [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 2 Congratulations Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: _________________ Serial Number: _________________________________________ Location on appliance: ____________________ Dealership [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 3 - T able of Contents - Section 8: Finishing A . Mantel Projections ................................... 1 8 B . Facing Material ........................................ 1 8 Section 9: Appliance Setup A . Remove Shipping Materials .................... 2 1 B. Clean [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 4 B. Glass Specifications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous locations such as bathtub enclosures as defined by the Consumer Product Safety Commission (CPSC). The tempered glass has been tested [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 5 A. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is required[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 6 3 Framing and Clearances NOTE: • Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONL Y. • I llustrations/diagrams are not drawn to scale. • Actual installation may vary due to individual design preference. W ARNING Fire Risk Provide [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 7 B. Clearances Figure 3.3 Clearances to Combustibles Fire Risk. • Locate and install appliance to all clearance specifications in manual W ARNING Fire Risk. Odor Risk. • Install appliance on hard met al or wood surfaces extending full width and depth of applia[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 8 C. Mantel Projections - Interior only Figure 3.4 Indoor Clearances to Mantels or other Combustibles above Appliance Figure 3.5 Indoor clearances to Mantel Legs or Wall Projections (Acceptable on both sides of opening.) 12 11 10 9 8 7 6 13 - 5 /8 12 - 5 /8 11 - 5 [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 9 T ermination Locations 4 ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ FP = APPLI[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 10 The diagram shows how to properly position, level, and se- cure the appliance (see Figure 5. 2). Nailing tabs are provid- ed to secure the appliance to the framing members. • Place the appliance into position. • Level the appliance from side to side and fron[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 11 • See Figure 5.3 for placement of combustible housewrap or building paper and non-combustible sheathing for the outside wall. • Once the appliance is in place use enough silicone caulk to make a water tight seal between outdoor surround and exterior sheathin[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 12 NOTE: Have the gas supply line installed in accordance with local building codes, if any . If not, follow ANSI 223.1. Installation should be done by a qualified installer approved and/or licensed as required by the locality . (In the Commonwealth of Massachusett[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 13 W ARNING Fire hazard. Do NOT change the valve settings. • This valve has been preset at the factory . • Changing valve settings may result in fire hazard or bodily injury . HIGH AL TITUDE INST ALLA TIONS U.L. Listed gas appliances are tested and approved wit[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 14 A. Recommendation for Wire This appliance requires 1 10-120 V AC be wired to the junction box for proper operation of the appliance. Electrical Information 7 NOTE: This appliance must be electrically wired and grounded in accordance with local codes or , in the [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 15 Wall Switch Position the wall switch in the desired position on a wall. Run a maximum of 25 feet (7.8 m) or less length of 18 A.W .G . minimum wire and connect it to the appliance ON/ OFF switch pigtails. Fan Installation T o provide best airflow, we recommend p[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 16 Figure 7.3 Intellifire Pilot Ignition (IPI) Wiring Diagram * NOTE: 1. Ignition module, valve, pilot, and wall switch operate on 3 volts. Uninterrupted 120 V AC is required at junction box unless equipped with battery back-up. D. Intellifire Ignition System Wirin[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 17 E. Junction Box Installation F . W all Switch Inst allation for Fan (Optional) If the box is being wired from the OUTSIDE of the appliance: • Install the Romex ™ connector (not included with appliance) in the side wrap. • Loosen two screws on the Romex con[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 18 A. Mantel Projections Figure 8.1 shows the minimum vertical and corresponding maximum horizontal dimensions of appliance mantels or other combustible projections above the top front edge of the appliance. Finishing 8 Figure 8.2 Clearances to Combustible Mantel L[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 19 Outside Facing Material Fire Risk. Finish all edges and fronts to clearances and specifications listed in manual. W ARNING • Black metal columns may be covered with non- combustible material only . • Do NOT overlap combustible materials onto appliance front.[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 20 Figure 8.5 Exterior View APPLIANCE HOOD TOP OF APPLI ANCE SOFF I T SIDING HOUSE W R AP (BUILD ING P A PE R) A ND SH EA TH IN G 31 I N CH MI NIMU M CL EARA NCE TO N ON-V I NYL 36 INCH CLEARAN C E TO VINY L SOFFIT , OVERHAN G OR CE ILING 12 I N CH MI NIMU M CL EAR[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 21 Appliance Setup 9 A. Remove Shipping Materials Remove shipping materials from inside or underneath the firebox. B. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity . C. Accessories Inst[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 22 E. Positioning the Logs Log Set Assembly: LOGS-TWI 1 2 2005-937D CAUTION: Logs are fragile! Carefully remove the logs from the packaging. Remove the metal supports which held the log box in place during shipping. STEP 2. LOG #1 (SRV2005-701): Use the indents on [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 23 STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on the peak of the burner . Do not cover any port holes. STEP 5. LOG #4 (SRV2005-703): Locate the sharp notch on log #4 against the grate tine as shown[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 24 STEP 8. LOG #7 (SRV703-703): Place log #7 on the grate tine between log #2 and log #5. Rest one end on the burner making sure not to cover any port holes. STEP 7. LOG #6 (SRV2077-701): Set log #6 onto the grate bar as shown. Lay the “Y” end of log #6 onto lo[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 25 A. Before Lighting Appliance Operating Instructions 10 CAUTION If installing Intellifire ignition battery backup: • Do not install batteries if the backup mode may not be used for extended time. • Batteries may leak. • Install batteries only when needed fo[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 26 B. Lighting Appliance Intellifire Ignition Final Inspection by _________________________________ 1. Turn off all electric power to the appli- ance. 2. This appliance is equipped with an ig- nition device which automatically lights the burner . Do not try to ligh[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 27 C. Af ter Appliance is Lit D. Frequently Asked Questions Initial Break-in Procedure When you light the appliance, you may notice that it pro- duces heat which does have an associated odor or smell. If you feel this odor is excessive it may require the initial th[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 28 T roubleshooting 11 With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualified service person in the diagnosis of a proble[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 29 Intellifire Ignition System - (continued) Sym pt om P ossibl e C auses Correct i ve Act i on s 3. C on t i n u ed d. Damaged pilot assem bl y or dirt y sen sor r od. V erify t h at ceram i c i n su l at or ar ou n d t h e sen sor rod is n ot cr acked, dam aged, [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 30 Maint aining and Servicing Appliance 12 Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a qualified service technician should perform an appliance check-up at the beginning of each heating season. W [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 31 I nspect Mai nt en ance T asks Doors, Su r rou n ds an d Fr on t s 1. Assess c on di t i on of scr een an d r epl ace as n ecess ary . R ecom mend addi t i on of scr een i f on e i s not present . 2. I n spec t f or scrat ch es, d en t s or oth er dam age an d r[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 32 Reference Materials 13 Locati on In ch e s Millime te r Locati on In ch e s Millime te r A 4-3/ 4 121 J 36-1/ 4 919 B 3/ 4 20 K 41- 7/8 106 2 C 1/ 2 13 L 21- 1/ 2 547 D 4 3 1091 M 40- 3/ 4 1036 E 1/ 2 13 N 42- 1/8 107 0 F 40-3/ 4 1035 O 23- 1/2 597 G 3-3 /8 86 P[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 33 Part number list on following page. (NG , LP) Exploded Parts Diagram B. Service Part s Twilight-II Beginning Manufacturing Date: 6-05 Ending Manufacturing Date: ___ 10 Log Set Assembly 4 7 5 9 2 1 6 3 8 11 12 13 14 15 16 17[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 34 B. Service Parts List See following page for additional IPI service part numbers. Twilight-II IT E M DESCRI PT I ON SERI A L # PA R T # 1B u r n e r A s s e m b l y 2087- 004 2G r a t e A s s e m b l y 2005- 012 3 R ef ra cto ry , Si de SR V2005-730 4 O u t door[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 35 14 (NG , LP) Exploded Parts Diagram Service Parts TWILIGHT -II Beginning Manufacturing Date: 6-05 Ending Manufacturing Date: ______ IT E M DESCRI PTI O N SE RIA L # PAR T N U M B E R 1 B ur ne r N e c k G a s k e t 438- 407 2V a l v e N G 593- 500 2 V al v e LP [...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 36 © 2005 Hearth & Home T echnologies Inc. C. Limited Lifetime W arranty LIMITED LIFETIME W ARRANTY HEA T & GLO GAS APPLIANCE PRODUCTS BASIC ONE-YEAR W ARRANTY . HEA T & GLO, a brand of HEARTH & HOME TECHNOLOGIES INC., located at 20802 Kensington B[...]

Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 37 Heat & Glo LifeS tyle Collection, a brand of Hearth & Home T echnologies Inc. 20802 Kensington Boulevard, Lakeville, MN 55044 www .fireplaces.com - NOTES - _______________________________________________________________________________ __________________[...]