Kenwood KRC-21SG инструкция обслуживания

KRC-21SA KRC-21SG Изделие изг отовлено в Индонезии © B64-2381-00/00 (EN) CASSETTE RECEIVER INSTRUCTION MANUAL KA CCETHЫЙ P AДИOПPИEMHИK ИHCTPУKCИЯ ПO ЭKCПЛУA T AЦИИ RADIOODTW ARZA CZ PODRĘCZNIK OBSŁUGI B64-2381-00 02.9.25 2:44 PM Page 1[...]

— 2 — English Contents Safety precautions ...............................................3 About Cassette tape ............................................4 General features ...................................................5 Power Selecting the Source V olume Attenuator Loudness dB (Sound Coordinate) Audio Control Switching Clock Display Adju[...]

— 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (A WG18) [...]

— 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer . • Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C). •[...]

Press the [SRC] button. Source required Display T uner "TUnE" T ape "T APE" Standby (Illumination only mode) "OFF" Selecting the Source Tu rning ON the Power Press the [SRC] button. Tu rning OFF the Power Press the [PWR OFF] button for at least 1 second. Power General features — 5 — SRC/ PWR OFF ¢ 4 CLK FM AM AUD/[...]

1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [A.ADJ] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below . 4 Adjust the Audio item Press the [ 4 ] or [ ¢ ] button. A[...]

The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while [...]

Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUnE" display . 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 T une up or down band Press the [ 4 ] or [ ¢ ] button. During reception of stereo stations the "STER[...]

T emporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Press the [CRSC] button for at least 1 second. Each time the button is pressed CRSC turns ON or OFF . When it's ON, the " "(CRSC) indicator is ON. CRSC (Clean Reception System Circuit) 2 Call up the station Press the [...]

Switching to the radio automatically during Fast Forwarding and Rewinding. Press the [T .CALL] button. Each time the button is pressed the T uner Call turns ON or OFF . When it's ON, the "T .CALL" indicator is ON. When you turn ON the T uner Call function, the motorized antenna will extend automatically . T uner Call Fast Forwarding [...]

— 11 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. ..........................................1 ..........................................1 1 3 External view Number of items 1. T o prevent short circuits, remove the key from [...]

English — 12 — 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 ANT CONT TEL MUTE Connector Function Guide Pin Numbers for ISO Connectors Cable Color Functions External Power Connector A–4 A–5 A–7 A–8 Speaker Connector B–1 B–2 B–3 B–4 B–5 B–6 B–7 B–8 Y ellow Blue/White Red Black Purple Purple/Black Gray Gray/Black White White/Black Green[...]

— 13 — — 13 — Connecting the ISO Connector (see p.12) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below . If the ISO connector pins are set as described in 2 or 3 , [...]

English — 14 — — 14 — ■ Removing the hard rubber frame 2 When the lower level is removed, remove the upper two locations. The frame can be removed from the top side in the same manner . Catch Lock 1 Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the fi[...]

— 15 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the[...]

English — 16 — FM tuner section Frequency range (50 kHz Space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 30dB) ....................9.3dBf ( 0,8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ...............15.2dBf ( 1.6 µV/75 Ω ) Frequency response ( ± 3.0 dB) ..............................30 Hz – 15 kHz Signal to Noi[...]