Keys Fitness HT402t инструкция обслуживания

Owner’ s Manual HEAL TH TRAINER 402t TREADMILL Customer Ser vice (888) 340-0482 K eys Fitness Pr oducts 4009 Distribution Drive Suite 250 Garland, TX 75041 www .keysfitness.com Model Name : HT402t Serial Number : Purchase Date : Write down for future reference Serial Number Decal Location HT402T 415-00014 09/05 Rev . B[...]

T a ble of Contents Important Safety Information 3 Before Y ou S tart 4 Assembly 5-7 W arm Up Exercises 8 Moving Instructions 9 Power Requirements 10 Console Panel Functions 1 1-12 Program and Operation 13 Belt Adjustment 14 Maintenance Instructions 15 T roubleshooting Guide 16 Error Messages 17 Parts List 18 Exploded V iew 19 W arranty Information[...]

Impor tant Safety Inf or ma tion W ARNING! Before using this treadmill or starting any exercise program, consult your physician. This is espe- cially important for persons over the age of 35 and/or persons with pre-existing health problems. The man- ufacturer or distributor assumes no responsibility for personal injury or property damage sustained [...]

Bef or e Y ou Star t Thank you for purchasing the HEAL TH TRAINER 402t T r eadmill! This quality product you have chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner's Manual and become familiar with the operation of your new treadmill. Remember to take the time to perform the str etching[...]

Assembl y The HEAL TH TRAINER 402t treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill. Do not throw away any packing materials until the unit is working pr operly . Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet. Loca[...]

Assembl y Assembly requires the included allen wrench and your own phillips screwdriver . Do not plug in the power cord until all assembly step are completed. 1. W ith the treadmill deck in the down position, leave the unit on the original packing material to assemble all parts.Refer to Figure 1. 6 Figure 1: Deck in down position Figure 2: Left and[...]

Assembl y 7 Figure 4: T op Rail Assembly 4. Attach the top rail to the left and right uprights using 2 Allen Bolts M5*15 and 2 Arc W ashers. Y ou may now firmly tighten all hardware. Refer to Figure 4. Note: Be car eful not to pinch the wir e harness. 5. Remove the four M5*20mm screws from the back of the console. Set aside. Connect Console W ire H[...]

W ar m Up Exercises T OE TOUCH STRETCH Stand bending your knees slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. This will stretch your ham- strings, back of knees, and back. HAMSTRING STRETCH Sit with one leg extended. Brin[...]

Mo ving Instr uctions CAUTION! T O A VOID THE RISK OF INJUR Y , NEVER A TTEMPT TO MOVE THE TREADMILL WHILE IT IS IN THE UNFOLDED OPERA TING POSITION. T O REDUCE THE POSSIBILITY OF INJUR Y WHILE LIFTING , BEND YOUR LEGS AND KEEP YOUR BACK STRAIGHT . AS YOU RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR BACK. IN ORDER T O RAISE OR LOWER THE TREA[...]

P ow er Requirements I MPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESUL T IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SER VICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERL Y GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT IF IT WILL NOT FIT THE OUTLET HA VE A PROPER OUTLET INST A[...]

Console Ov er view CONSOLE FUNCTIONS: There is one display windows on the control panel to provide feedback information. This window will display information on the following functions: TIME Indicates elapsed time after pressing start in minutes and seconds (0-99 minutes, 0-59 seconds). SPEED Indicates MPH (miles per hour) in .1 increments. DIST AN[...]

Console Ov er view CONSOLE BUTT ONS: There are 8 Console button. POWER: Used to turn unit of f and on. ST AR T : Used to Start unit. ST OP: Used to Stop unit. RESET : Used to Reset values in display window . PROGRAM: Used to toggle thru five preset programs. MODE: Used to toggle thru dif ferent modes. SPEED +/-: Used to increase and decrease Speed.[...]

Pr ogr am and Oper a tion MODE OVER VIEW : This treadmill had 5 different exercise modes. Following as a brief overview and instruction for each mode. MANUAL MODE: Allows user to manually adjust Speed with + or - buttons. T ime, Calories and Distance count up from 0. T o use Manual Mode, Attach safety key . Press Start button. Y ou are in now in Ma[...]

Belt Adjustment W ARNING! Do not over -tighten rollers! This will cause prema- ture r oller bearing failure! Belt adjustment and tension performs two functions: adjustment for tension and centering. Y our new treadmill comes pre-adjusted from the factory for tension and centering. Please follow the procedures below if the belt shifts to the left or[...]

Maintenance Instr uctions W ARNING! Before performing any maintenance to your treadmill, always unplug the power cord from the surge protector . CLEANING Routine cleaning of your HT402t Fitness treadmill will extend the life of your treadmill. W ARNING! T o pre- vent electrical shock, be sure the power to the treadmill is OFF and the unit unplugged[...]

T roubleshooting Guide T readmill will not start . 1. Is the Safety Key inserted into the treadmill Console? 2. Make sure the power cord is plugged into a surge protector , the sur ge protector is plugged into a properly grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements” on page 1 1). 3. Check the circuit brea[...]

Er r or Messages T readmill Err or Messages . Y our treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error codes will be displayed in the console display windows. Err or Messages Er01 - The console and controller are disconnected. Check cable connections. Er02 - The mot[...]

P ar ts List REF # PART # DESCRIPTION QTY REF # PART # DESCRIPTION QTY 1 423-00027 TOP RAIL, HT402T 1 31 402-00130 CHAMBER BOLT, M6X30 6 2 423-00028 LEFT UPRIGHT, HT402T 1 32 402-00015 PHILIP SCREW ST4.2*16 12 3 423-00029 RIGHT UPRIGHT, HT402T 1 33 402-00031 PHILIP SCREW ST4.2*13 4 4 423-00030 BASE FRAME, HT402T 1 34 402-00019 PHILIP SCREW ST4.2*13[...]

Exploded V iew 19 1 2 3 4 5 6 7 10 9 8 11 11 12 13 14 15 16 17 18 19 19 20 21 22 27 27 48 50 51 52 53 54 55 56 57 58 59 23 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49[...]

W ar r anty Inf or ma tion HT402t T readmill designed and distributed by KEYS FITNESS PRODUCTS, LP – LIMITED W ARRANTY PLEASE CONSUL T YOUR PHYSICIAN BEFORE USING THIS PRODUCT . This Limited W arranty applies in the United S tates and Canada to products manufactur ed or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand na[...]

Customer Ser vice (888) 340-0482 K eys Fitness Pr oducts 4009 Distribution Drive Suite 250 Garland, TX 75041 www .keysfitness.com[...]