Longshine LCS-WR5-2214-A инструкция обслуживания

802.1 1g W ireless Broadband Router User ’ s Manual[...]

FCC Certifications Federal Communication Commission Interference St atement This equipment has been tested an d found to comply with the limit s for a Class B digit al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection against harmful interference in a residential inst allation. This equipment [...]

CE Mark W arning This equipment complies with the requirements relating to electromagnetic compatibility , EN 55022 class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member S tat es relating to electromagnetic compatibility . Company has an on-going policy of upgrading it s[...]

T able of Contents Unpacking Information ············································································· 1 Introduction T o Wireless Router ···························································?[...]

Firewall Confi guratio n ····································································· 31 Port Filtering ··············································································· 31 IP fil[...]

1 Unpacking Information Thank you for purchasi ng the product. Before you start, pl ease check all the cont ents of this package. The product packa ge should include the fol lowing: 1. One Wireless Router 2. One power adapter 3. One User Manual (CD) 4. One detachable antenna[...]

2 Introduction T o Wireless Router General Desc ription The Wireless Router built-i n with 4-port 10/100Mbps F ast Ethernet Switch is the latest generation of Wireless router p roduct for Home/Of fice and SOHO users. This full-feature and self-c ontained compact Wireless Router w ill be fully for broadband ac cess in both of L AN and Wirele ss envi[...]

3 Key Features The switch provides the fol lowing key features:  Complies with IEEE 802. 1 1b/g wireles s standards  Provides one 8 02.1 1b/g wireless Rev erse SMA detachable antenna  High speed tra nsfer data rate up to 54Mbps  Supports turbo mode fo r 72Mbps data tran sfer  Supports wireless data encryption with 64/128-bit WEP , WP[...]

4 The Front Panel LED definition System LEDs System LED indicators l ocate on the front panel for show ing the operating status of the whole device.  PWR (Power) LED This indicator lights gre en when the Wireless Ro uter is receiving power; otherwise, it is off.  Status LED The LED will be dark for a few seconds when the system is started. Af[...]

5 Port LEDs (W AN) Port LED (WAN) indicators locate on the front panel for s howing the operating stat us of W AN port.  Act/Link LED The LED stay s light (green) means the p ort has good linkage to its associat ed devices. The LED will blink green when there is traffic transverse the port. Port LEDs (LAN) Port LEDs (LAN) indic ators locate on t[...]

6 3. Do the same with the second part. 4. Place the Router Wall-mount option Before attach this router on the wall, you have to finish the desktop option steps first. 1. Select a location with access for cables and a power outlet. 2. Unplug the unit. Place it upside down on a flat surface and mark the two holes for anchors. 3. Installing the Wall m[...]

7 Installing And Using W ireless Router This Chapter provides a step-by-step gui de to the installation and configuration of the Wireless Router . We suggest you go over t he whole chapter and then do more advanced operation. Network configuration setup S teps to build up the network:  Connect the ADSL or Cable modem to the Ethernet W AN port on[...]

8 Computer configuration setup In order to communic ate with this Wireless Rout er , you hav e to configure the IP addresses of your c omputer to be compatibl e with the device. The router supports DHCP server and it is enabled as defa ult. Users that configure your IP address as “Obtain an IP address automatically” may skip the following IP co[...]

9 3. C hoose Internet Proto col (TCP/IP) and click Properties. 4. Y ou may choo se “Obtain an IP address automatically ”(recommend) to get IP address automatically or choose “Use the followi ng IP address” to specify IP addresses manuall y . Please click the OK button after yo ur configuration.[...]

10 Management Wireless Router configuration setup In order to make the whol e network operate succ essfully , it is necessary to configure the Wireless Router through your computer has a WEB br owser installed. Pleas e follow up the steps listed below . 1. Double click the Internet WEB browser icon on yo ur desktop screen (Netscape Commu nicator 4.[...]

11 4. The Graphic User Interface After the passwor d authorization, the Setup Wizar d shows up as the home pag e of the Graphic User int erface. Y ou may click on eac h folder on left column of each page to get access to each conf iguration page.[...]

12 Setup Wizard If you are using the r outer for the first time, you may follo w the procedur es of the setup wizard to do a step-by-step config uration. Note: The following instruction d oes an overall intr oduction to the Setup W izard. For detail information to eac h item, please refer to instr uction of each page. 1. T o start the Setup Wizard,[...]

13 3. Mark the check box to ena ble synchronizing time by NTP server . Select the reli gion you live and a NTP server by click ing the drop list then click “Next”. 4. Specify an IP address and subn et mask for connecting to the r outer in LAN.[...]

14 5. Select a WAN access type for the router to connect to Inte rnet. Fill in the parameters that required in eac h blank, and then click the “Next ” button. Y ou may get those parameters from your ISP . 6. Select the wireless par ameters that are used for ass ociating with this router an d click “Next”[...]

15 7. Click the drop list to select the encryption type for your wireless netw ork. Fill in the parameters for the e ncryption type you select and click finish to complet e configuration.[...]

16 Operation Mode T o select an operatio n mode for this router , click on the mode that you wa nt to perform and click the button to execute.[...]

17 Wireless Wireless Access Point builds a wireless LA N and can let all PCs equi pped with IEEE802.1 1b/g wireless network adaptor co nnect to your Intranet. It supports WEP en cryption and MAC addre ss filter to enhance the security of your wireless network. Basic Settings Y ou can set up the configuration of your Wireless and monitor the Wireles[...]

18 Channel Number The channel used by the wireless LAN. All devices i n the same wireless LA N should use the same chan nel. Associated Clients Click "Show Active Clients" button, then an "A ctive Wireless Client T able" will pop up. Y ou can see the status of all active wireless st ations that are connecting to the access point[...]

19 from this active wireless station. Rx Packet The number of receiv ed packets that are rece ived by this active wireless station. TX Rate The transmission rate Power Saving Shows if the wireless client is in Power Saving mode Expired Time This is the time in seco nd before dissociat ion. If the wireless keeps idl e longer than the expir ed time, [...]

20 Advanced Settings Y ou can set advanced wireless LAN parameters of this ro uter . The parameters inclu de Authentic ation T ype, Fragment Threshold, RTS Threshold, Beacon Interv al, Data Rate, Preamble T ype, Broadc ast SSID, IAPP and 802.1 1g Protection. We recommend not changing thes e parameters unl ess you know what change s will be there on[...]

21 RTS Threshold If the packet size is smalle r the RTS threshold, the wireless router will n ot send this packet by using the RTS/CTS mechanism. Beacon Interval The period of time how l ong a beacon is broadcasted. Data Rate The "Data Rate" is the d ata packets limitation this wireless router can tr ansmit. The wireless router wil l use [...]

22 Security At the page, you can set up the WE P , WP A Encryption to ensure the security of your Wireless. Configuration Encryption T o enable WEP , WP A, WP A2 and WP A2 Mixed encryption modes, select the option in the drop list. If you select none, any data will be transmitted without Encry ption and any station can access the ro uter . Use 802.[...]

23 WP A2 Cipher Suite Select the WP A2 Cipher Suite to be TKIP or AES Pre-Shared key Format T o decide the format, s elect what you need in the drop list. Pre-shared Key Enter the Pre-shar ed Key according to the pre-shared key format you s elect. Enable Pre-Authenticatio n Y ou can ma rk this checkbox to enable Pre-authentic ation after selecting [...]

24 Access Control T o restrict the Number of Access authenticat ion of Stations, Set up the control list in this page. Configuration Wireless Access Control Mode Click on the drop l ist to choose the access control mode. Y ou may select “Allow listed” to allow those a llowed MAC addres ses or select “Deny Listed” to ban those M AC addresses[...]

25 WDS Setting Wireless Distribution Syste m allows the router to communi cate with other APs wirelessly . T o make it work, you must e nsure that these APs and the Router are in th e same Channel and add these APs MAC Address and Comment values into the WDS list. Do n’t Forget to Enable the WD S by click the check box of “En able WDS” and pr[...]

26 TCP/IP Setting LAN Interface Setup T o set up the configuratio n of LAN interface, Privat e IP of you router LAN Port and Subnet mask for yo ur LAN segment. Configuration IP address The IP of your Router LAN port (Default 19 2.168.1.1) Subnet Mask Subnet Mask of you LAN ( Default 255.255.255. 0) DHCP Server T o give your LAN Client an IP , you h[...]

27 W AN Interface Setup This page allows us ers to configure those parameters for connecting to Internet. Y ou may select the WAN Acc ess T ype from the drop list and configure parameters for eac h mode. Static IP Mode IP Address, Subnet Mask and Default Gateway Fill in the IP address, Subn et Mask and Default Gateway that provided b y your ISP. DN[...]

28 PPPoE Mode User Name, password and service nam e Fill in the User Name, password and service name that provided by your ISP . Connection T ype “Continuous” is for Always keep connection “Connect on demand” is for bill by connection time. Y ou can set up the Idle time for the value specifi es the number of time that ela pses before the sy[...]

29 PPTP Mode IP Address, Subnet Mask, Server IP Address, User Name and Password Fill in the IP address, Subnet Mask, Server IP Address, User Name and passw ord that provided by y our ISP . MTU Size T o Enable the Maximum T ransmission Unit of Rout er setup. Any packet over this number will be ch opped up into suitable size before sending. L arger n[...]

30 Common configurations for W AN interface There are some settings are able to be confi gured on each WAN access types: Enable We b Server Access on W AN from port T o Enable the user to acc ess this Router through I nternet, Enter the specific IP and the port number Enable IPsec pass through on VPN connection Mark the check box to en able IPsec p[...]

31 Firewall Configuration Port Filtering The firewall could n ot only obstruct outside intruders from i ntruding your system, but also restricting th e LAN users. Port Filtering T o restrict certain type of data packets from your LAN t o Internet through the Ro uter , add th em on the Current Filtering T able. Configuration 1. Click the check box o[...]

32 IP filtering The Wireless Router c ould filter the outgoin g packets for security or management consid eration. Y ou can set up the fi lter against the IP addresses to block sp ecific internal users from acc essing the Internet. Configuration 1. Click the check box of “Enable IP Filtering” to enable the function. 2. Enter the specific L ocal[...]

33 MAC filtering The Wireless Router c ould filter the outgoin g packets for security or management cons ideration. Y ou can set u p the filter against the MAC addresses to block sp ecific internal users from acc essing the Internet. Configuration 1. Click the check box of “Enable MAC Filt ering” to enable the fun ction. 2. Enter t he specific [...]

34 Port forwarding The Port Forwarding allows you to r e-direct a particular range of service port numbers (from the Internet/W AN Ports) to a particular LAN IP address. It helps you to host some servers behind t he router NA T firewall. Configuration 1. Click the check box of “Enable port forw arding” to enable the fun ction. 2. Enter the spec[...]

35 URL Filtering The URL Filter allows us ers to prevent certain URL from accessing by users in LAN. This filter will block those URLs that conta in certain keywords. Configuration 1. Click the check box of “Enable URL Filtering” to enable the fun ction. 2. Enter the URL that is going to be banned. STEPS 3. T o Del ete the URL on the tab le, Cl[...]

36 Virtual DMZ The virtual DMZ is use d to enable protocols, which need to open ports on the router . The router will for ward all unspecif ied incoming traffic to the host specified in this page. T o configure it, enter the Host IP (private IP address) and Click “Apply changes” to enact the se tting.[...]

37 Management Status In the home page of the Wireless Router , the left navigation bar s hows the options to configure the system. In the right navigati on screen is the summary of system status for view ing the configurations.  System Uptime The period that you power the device on. Firmware V ersion The version of the firm ware applied on this [...]

38 Channel Number The channel used by the wireless LAN. All devices in the same wireless LAN sh ould user the same ch annel Encryption The security encryption status of this wireless network BSSID The Basi c Service Set Identi ty of this router .(This parameter is th e same as the MAC addres s of LAN port) Associated Clients The number of ass ociat[...]

39 Statistics On this page, you can m onitor the sent & received packets counters of wireless, Ethernet LAN, an d Ethernet WAN. T o see th e latest report, click refresh button. DDNS This page allows us ers to connect to DDNS. T o enable DDNS, Ma rk the “Enable DDN S” checkbox. Select the serv ice provider from t he drop list. Fill in domai[...]

40 Time Zone Setting This page allows us ers to configure the tim e of the router . T o specify manually , fill i n the blanks in “Current Time” and click the “Apply Ch ange” button. T o sync hronize time from a timeserver, please mark the “Enable NTP client update” chec kbox, select a NTP server from the drop list or manu ally enter a [...]

41 the “clear” button to clean the log table. Upgrade Firmware T o Upgrade Firmware, 1. Click “browse… ” button to select the firmw are you want to upgrade. STEPS 2. Click Upload to start the u pgrade process. Pleas e don’t close the WEB-br owser and wait for proce ss to complete. When Upgr ade is completed, y ou can start to use the ro[...]

42 Save and Reload Settings T o save setting to file, click “Save...” button. T o load setting from file, 1. Click “Browse…” on the to select the file 2. Click upload to start the proc ess and wait for it to complete T o reset setting to Default, click rese t to start the process and it will b e completed till the status LED start blinkin[...]

43 61LS-0440A+207C Product Specifications Standard IEEE802.3, 10BASE-T IEEE802.3u, 100BASE-TX IEEE802.3x full duplex operation and flow control IEEE802.1 1b wireless LAN infrastructure IEEE802.1 1g wireless LAN infrastructure Interface 1 * W AN port 4 * 10/100 RJ-45 Fast Ethernet switching ports Antenna: 802.1 1b/g wireless reverse SMA detachable W[...]