Mitsumi electronic DX-TL4716U инструкция обслуживания

1 DIGIT AL RECORDER USER ʼ S MANUAL MODEL DX-TL4716U THIS INSTRUCTION MANUAL IS IMPORT ANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGIT AL RECORDER.[...]

W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSER TED T O PREVENT BLADE EXPOSURE. W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER[...]

Beginning A VERTISSEMENT DANGER D’ÉLECTROCUTION NE P AS OUVRIR A VERTISSEMENT : POUR ÉLIMINER T OUT RISQUE D’ÉLECTRO- CUTION, NE P AS OUVRIR LE COUVERCLE (OU LA P ARTIE ARRIÈRE). AUCUNE PIECE RÉP ARABLE P AR L ’UTILISA TEUR NE SE TROUVE À L ’INTÉRIEUR. POUR T OUTE INTERVENTION D’ENTRETIEN OU DE RÉP ARA TION SE CONFIER AUX TECH- NI[...]

Important safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR RECORDER AND RET AIN FOR FUTURE REFERENCE. FOLLOW ALL W ARNINGS AND INSTRUCTIONS MARKED ON THE RECORDER. 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety and operating instructions s[...]

Beginning 16. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to quali fi ed service personnel. 17. Damage requiring Service Unplug this product from the wall outlet and refer servicing to quali fi ed service personnel under the follo[...]

2 Caution and care HEA VY OBJECTS SHOULD NEVER BE PLACED ON THE UNIT (E.G., MONITOR) NEVER REMOVE THE TOP COVER AND T OUCH OR INSERT ANY OBJECT INSIDE THE UNIT T ouching the inside of the cabinet or inserting foreign objects of any kind through the disc loading slot or ventilation holes not only creates a safety hazard but can also cause extensive [...]

3 Beginning Notice about construction of the surveillance system using this unit • This unit can be controlled by the external devices via RS-232C terminal or LAN terminal. This unit can also be used to control external devices via external terminal, RS-422/485 terminal, or RS-232C terminal. Owning to these functions, this unit fl exibly applies[...]

4 INST ALLA TION LOCA TION AND HANDLING • Place this unit horizontally and in a stable place. If this unit is not placed correctly and used in an unstable place, the u nit may be damaged such as removal of the DVD/CD disc. • Do not place this unit close to other electronic or magnetic equipment. This will avoid video and audio distortion. • W[...]

5 Beginning Contents How to read this manual Viewing displays (Refer to this information when operating): Reference information concerning operation (Caution required): Cautionary items concerning operation Finding desired information There is a “ Contents ” at the beginning of this manual. T roubleshooting Read T roubleshooting (pages 34, 35) [...]

6 Note Thank you for purchasing Mitsubishi digital recorder DX-TL4716U (hereinafter referred to as “ Product ” ). Before using this Product, please be sure to read the following Software License Agreement with regard to the software contained in this Product (hereinafter referred to as “ Licensed Software ” ). By using this Product, you are[...]

7 Beginning This Software License Agreement (“Agreement”) is an agreement between you (“User”) and Mitsubishi Electric Corporation (“Licensor”) with regard to the license to use Licensed Software. Article 1 (Grant of license) Licensor hereby grants to User a nonexclusive, nontransferable license to use Licensed Software. Article 2 (Lice[...]

8 How to set the menus Setting the menus The operations of this unit can be set via a menu displayed on OUTPUT A monitor . Y ou can select and set the menu by using the buttons on the front panel or using a USB mouse connected to the unit. When using the front panel buttons, the numbers 1-16 (camera number buttons) and letters A to E (SPLIT screen [...]

9 How to set the menus Displaying a menu screen step 1. Press the SET UP button or click the left button on the mouse to display a menu. • The <User Menu> appears. • T o open other menu, press the D button or left- click on “Next .” When you use a mouse, click the following area to operate. Closing a menu screen step 1. Press the E bu[...]

10 How to set the menus (continued) Inputting numbers Using the front buttons of the unit: step 1. Press the camera number buttons (0 to 9) to input and use that number . • The number displayed in red can be changed. step 2. T o move to the next input area, press the 16 button. T o go back to the previous area, press the 14 button. Using a mouse:[...]

11 How to set the menus Symbols in the menus Some symbols appear in the menu screens. The meanings are as follows. (Help) When you press the HELP button or click this symbol, the detailed information on the menu appears. (Left) When you press the 14 button or click this symbol, the item to be set shifts to left. (Right) When you press the 16 button[...]

12 Setting the time and date Time/Date Setting This function is used to set the present date, time, and auto daylight saving. Auto daylight saving function is used to auto- matically gain an hour for the speci fi ed time period. Start/end time of the auto daylight savings can be checked and if needed, changed. Before you start recording, accuratel[...]

13 Basic operations Basic multiplexer functions This function is used to activate multiplexer functions using the buttons on the front panel. Camera number buttons DIGIT AL ZOOM button SPLIT screen buttons Move buttons SEQUENCE button OUTPUT A/B button Multiplexer buttons 1. Camera number buttons (1 to 16) Displays the picture supplied from the cam[...]

14 Controlling the camera This function is used to control the cameras connected via RS-232C or RS-422/485 terminal. PTZ control using the menu 1 2 PTZ Control 6 step 2 step 1 step 3 step 4 Go to PTZ Control Zoom, iris, focus adjustment, AutoPan Preset Select PTZ Camera User Menu step 1. Pan or tilt the PTZ camera connected. • Click the gray area[...]

15 Basic operations Basic manual recording This function is to setup the recording parameters of recording setting pattern A to start recording manually . Ensure all the cameras are connected and time and date has been set correctly . Before you start recording, check the repeat recording settings in the <Data Management Setting for Main Memory&[...]

16 Basic playback This function is used to playback recorded data. This unit allows recorded data to be played back using various methods. The basic playback described below is the most common method for playback. step 1. Press the PLA Y button inside of the front door . • Playback starts. • After turning the power on, the oldest recording data[...]

17 Basic operations Basic search This function is used to search the start point of needed picture. This unit is equipped with 5 search functions (Search by T ime and Date, Search by Alarm List, Find data storage location, Search by Book Mark, and Search by Motion). In this section, the common search methods, search by time and date and search by a[...]

18 Search by Alarm List This unit stores the start time of alarm recording and emergency recording in the alarm list when such recording begins. This item is used to search the desired picture using the list of alarm recording (emergency recording). The search result displays in still frame playback of the single screen display . 3 D Search 1 steps[...]

19 Basic operations Copying the recorded data This item is used to copy the data to a copy device. Copy Data to Copy 1 Drive/Set Copy 1 Drive This item is used to copy the data to Copy 1 device by speci- fying the start and end points. The points are specified by the date and time or the bookmark. This function is useful for copying the data of the[...]

20 Copy Data to Copy 2 Drive/Set Copy 2 Drive Copy 2 is a backup or archive feature. This item is used to copy the data to Copy 2 device by specifying only the start point. The point is speci fi ed by the date and time or the book- mark. The copy continues until the end point of the recording data reaches or the media to be copied becomes full unl[...]

21 Basic operations Copying the data of this unit to a video cassette This function is used to copy the data of this unit to a video cassette using an analogue video cassette recorder . Data can be copied even when the unit is in recording. For the recording operation, see the instruction manual for the ana- logue video cassette recorder used. step[...]

22 Copying the recorded data (continued) Field Reverse Click to display a still picture one fi eld before. Stop Click to stop playback. Audio, if recorded, is played back after the stop when [Not Synchro.] is selected and the audio command has been enabled. Field Advance Click to display a still picture one fi eld after. Playback Click to playbac[...]

23 Basic operations In synchronized audio playback, the frequency of picture refreshing is reduced depending on the processing power of PC. When you want to playback giving priority to picture, select [Not Synchro.]. The settings on this panel remain intact for the next start- up. Audio playback channel and picture display channel are not related. [...]

24 Login Start up the Microsoft Internet Explorer and log in. step 1. Start up the Microsoft Internet Explorer and enter the IP address of the recorder . • Enter the IP address which is set in <LAN (Communication) Setting> (System Menu COM/LAN). When shipped from the factory , the IP address is set to “192.168.000.100.” • The “[Logi[...]

Communications by Web Browser 25 step 3 -1 . (If you make an error in entering the user ID or password • • • ) • The “[Caution]” screen appears. step 3 -2 . Select “Login” and either left-click or press ENTER. • The “[Login]” screen appears. step 3 -3 . Follow step 2-1 and enter the correct “User ID” and “Password.” st[...]

26 Live Monitoring Displays live video on the PC screen. step 1. Select “Live Monitoring” and left-click. • The “[Live]” screen appears. When video retrieval via web browser is tried for the fi rst time, a message as shown below may be displayed. If it is displayed, click “Y es.” When the unit is recording at the full rate (240 pps),[...]

Communications by Web Browser 27 Playback Retrieves, plays back and searches for pictures that have been recorded by the recorder . step 1. Select “Playback” and left-click. • The “[Playback]” screen appears. step 2. Press the button. • Playback starts. <Function description> : Press to start playback. : Press to start speed searc[...]

28 Alarm List Search Click “Alarm List” and the “Alarm List Search” screen appears in the sub-screen. step 1. Set the desired date/time and number of alarm list items to be acquired, and then click “Refresh” to acquire the alarm list. • The alarm list cannot be acquired without clicking “Refresh.” • Enter the needed number of al[...]

Communications by Web Browser 29 User Registration This is the screen for changing the settings for registered user authorization, and for deleting a registration. It can also be used for registering new users. step 1. Select “User Registration” and left-click. • The “[User Registration]” screen appears. step 2 -1 . (T o change registered[...]

30 Recorder Title & Camera T itles This is the screen for setting or changing the recorder and the camera titles. step 1. Select “Recorder T itle & Camera T itles” and left- click. • The “[Recorder T itle & Camera Titles]” screen appears. step 2. Enter the desired recorder or camera title to “New T ext.” • The recorder a[...]

Communications by Web Browser 31 T o view the attached picture: In the PC with supplied application software installed, click or double click the fi le. In the PC without supplied application software installed, drag the fi le and drop it into the “MPicViewer .exe” which is stored in the supplied CD. The displayed picture can be printed or ca[...]

32 Clock Setup This is the screen for setting the clock of the recorder via PC. step 1. Select “Clock Setup” and left-click. • The “[Clock Setup]” screen appears. step 2 -1 . Set “Month,” “Date,” “Y ear ,” “Hour ,” “Min.,” “Sec.,” “T ime Zone” to the desired time. step 2 -2 . Select “set” and left-click. st[...]

Communications by Web Browser 33 Logout In this screen, assign “Logout” settings to end the job. step 1. Select “Logout” and left-click. • The “[Logout]” screen appears. step 2. Close the Web Browser . If the browser is closed incorrectly (not logging out cor- rectly), the user ’s session ID is saved for 5 minutes. If the Log in is [...]

34 If problems with the unit persist even after you’ve followed the suggestions below , disconnect the power cord and contact the retailer from whom you purchased the unit. INST ALLA TION RECORDING Consult the following Description of problem • Is the power cord properly plugged in? • Is the LOCK indicator light on? • Is the TIMER indicator[...]

T roubleshooting 35 OTHERS PERIPHERAL RECORDING DEVICE Consult the following Description of problem The unit does not perform playback. The copy device dose not respond. The camera cannot be controlled via this unit. The unit does not perform the motion detection function. The unit cannot be controlled via the personal computer . There is a camera [...]

36 W arnings and their appropriate countermeasures #1 Options in the CALL OUT output column: • Selectable: Selects to output CALL OUT signal or not on the menu screen. • Fixed: Outputs CALL OUT signal from the CALL OUT terminal regardless of the menu setting. • None: Does not output CALL OUT signal, but displays a warning on the screen. The w[...]

W arnings and CALL OUT output 37 W arning Display CALL OUT output #1 Cancelling the warning Log number Countermeasure # # # LOG54 #7 LOG13 #8 LOG33 #8 LOG43 #8 LOG73 #8 LOG23 #8 LOG14 #8 LOG74 #8 LOG24 #8 LOG34 #8 LOG44 #8 LOG55 #7 LOG6200 LOG5100 LOG5200 LOG5201 LOG5300 LOG3500#5 LOG7500#6 LOG3600#5 LOG7600#6 LOG5101 LOG5102 LOG5103 Fixed None Fix[...]

[...]

[...]

PRINTED IN MALA YSIA[...]