New Leader Battery Industry L2020G4 инструкция обслуживания

IMPORTANT: READ THE SAFETY GUIDELINES AND ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING HIGHWAY EQUIPMENT COMPANY – NEW LEADER DIVISION 1330 76TH AVE SW, CEDAR RAPIDS, IOWA 52404-7052 PH. (319) 363-8281 www.highwayequipment.com FAX (319) 632-3081 HIGHWAY EQUIPMENT COMPANY GENERAL MANUAL FOR MODEL L2020 G4 SAFETY GUIDELINES INSTALLATION OPERATION MA[...]

[...]

MODEL L2020G4 UNIT SERIAL NUMBER__________________ MANUAL NUMBER: 97373 - A EFFECTIVE 6 /2006 HIGHWAY EQUIPMENT COMPANY 1330 76 TH AVE SW CEDAR RAPIDS, IOWA 52404 - 7052 PHONE (319) 363 - 8281 FAX (319) 632 - 3081 www .highwayequipment.com BUILDING THE BEST SINCE 1939 Copyright 2003 Highway Equipment Company, Inc.[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 2 97373-A Page Rev. A TABLE OF CONTENTS Warranty ................................................................................................... 4 Preface ...................................................................................................... 5 Safety[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 3 97373-A Page Rev. A TABLE OF CONTENTS CONTINUED Instructions for Ordering Parts .................................................................... 52 Legend for Parts List Symbols .................................................................... 52 Parts List Mou[...]

INSERT NEW LE A DER (NL) WA RR A NTY[...]

TA B SA F ETY[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 5 97373-A Page Rev. A PREFACE PLEASE ! ALWAYS THINK SAFETY FIRST !! The purpose of this manual is to familiarize the person (or persons) using this unit with the information necessary to properly install, operate, and maintain this system. These instructions cannot repl[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 6 97373-A Page Rev. A SAFETY In this manual and on the safety signs placed on the unit, the words “DANGER,” “WARNING,” “CAUTION,” and “IMPORTANT” are used to indicate the following: DANGER Indicates an imminently hazardous situation that, if not avoided,[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 7 97373-A Page Rev. A SAFETY AVOID ACCIDENTS Most accidents, whether they occur in industry, on the farm, at home, or on the highway, are caused by the failure of some individual to follow simple and fundamental safety rules or precautions. For this reason, most acciden[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 8 97373-A Page Rev. A SAFETY DECALS MAINTENANCE INSTRUCTIONS 1. Keep safety decals and signs clean and legible at all times. 2. Replace safety decals and signs that are missing or have become illegible. 3. Replaced parts that displayed a safety sign should also display [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 9 97373-A Page Rev. A SAFETY DECALS CONTINUED[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 10 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 1. Before attempting to operate this unit, read and be sure you understand the operation and maintenance manual. Locate all controls and determine the use of each. Know what you are doing! 2. When leaving the[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 11 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 8. Be careful in getting on and off this unit, especially in wet, icy, snowy or muddy conditions. Clean mud, snow or ice from steps and footwear. 9. Do not allow anyone to ride on any part of unit for any rea[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 12 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 14. Starting fluids and sprays are extremely flammable. Don’t smoke. Stay away from flame or heat! 15. All vehicles should be equipped with a serviceable fire extinguisher of 5 BC rating or larger. 16. Hydr[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 13 97373-A Page Rev. A GENERAL SAFETY RULES Operation Section 21. When using metering device, shut off spinner before placing box on hook or when removing it. Handle box with care to avoid injury. 22. Read and understand the precautionary decals on the spreader. Replace[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 14 97373-A Page Rev. A GENERAL SAFETY RULES Maintenance Section 1. Maintenance includes all lubrication, inspection, adjustments (other than operational control adjustments such as feedgate openings, conveyor speed, etc.) part replacement, repairs and such upkeep tasks [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 15 97373-A Page Rev. A GENERAL SAFETY RULES Maintenance Section 8. If repairs require use of a torch or electric welder, be sure that all flammable and combustible materials are removed. Fuel or oil reservoirs must be emptied, steam cleaned and filled with water before [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 16 97373-A Page Rev. A GENERAL SAFETY RULES Installation Section 1. The selection of the vehicle on which a spreader body is to be mounted has important safety aspects. To avoid overloading: a. Do not mount spreader on a chassis which, when fully loaded with material to[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 17 97373-A Page Rev. A GENERAL SAFETY RULES Installation Section 5. Do not weld on vehicle frame as such welding can lead to fatigue cracking and must be avoided. When drilling holes in frame member, drill only through the vertical web portions − do not put holes in t[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 18 97373-A Page Rev. A NOTES:[...]

TA B OP & M A INT[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 19 97373-A Page Rev. A GENERAL DESCRIPTION The Model L2020G4 is a hopper-type spreader intended for spreading free-flowing granular agricultural materials, such as chemical fertilizers, agricultural limestone and gypsum. It is intended for truck chassis or flotation veh[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 20 97373-A Page Rev. A DIMENSIONS & CAPACITIES Dimensions Body Length Overall A Inside B Frame C Cab to Axle or Cab to Tandem CA/CT 10’ (3.05m) 148” (376cm) 120” (305cm) 111” (282cm) 84” (213cm) CA 11’ (3.35m) 160” (406cm) 132” (335cm) 123” (312cm)[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 21 97373-A Page Rev. A INSTALLATION INSTRUCTIONS Recommended sequence of installation is: 1. Mounting of PTO and pump drive. 2. Installation of radar (if applicable) 3. Mounting of spreader. 4. Installation of controller and encoder (if applicable) 5. Installation of hy[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 22 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED 2. Pump PTO Selection: The following chart shows pumps available through Highway Equipment Company ( HECO): HECO Pump Part No. Pump CID Theoretical Pump GPM (100% efficiency) Pump RPM 86664 3.87 30 1800 86665 4.[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 23 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED HYDRAULIC PUMP INSTALLATION A mounting bracket for the hydraulic pump is shipped with the spreader. It may be necessary to modify this bracket to fit your truck since many variable factors such as PTO make and m[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 24 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED MOUNTING OF SPREADER BODY Truck Frame Length The length from the rear of the cab to the rear end of the frame should be approximately as shown on “Dimensions and Capacities” chart under “C”. Shorten truc[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 25 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Positioning Body Using a suitable lifting device, lift empty spreader onto truck frame. Position body centrally with respect to truck frame rails and approximately 4" from rear of cab. Check position of spr[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 26 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Figure 3 - Mounting Angle Installation Installing Rear Mounting Angles Position rear mounting angles with the slotted faces against the side of the truck frame and centered on rear cross sill. Mark slot location[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 27 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Securing Spreader Body to Frame Install mounting angles and tighten mounting bolts to recommended torque. Weld mounting angles to spreader cross tubes by welding on front, outer and rear sides (Figure 4). Make s[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 28 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED FENDER INSTALLATION Figure 5 - Fender Angle Installation Attach fender angles to spreader body as shown in Figure 5. Use upper set of holes for full or super floatation fenders and lower set of holes for semi-fl[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 29 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED HYDRAULIC HOSE INSTALLATION Determine the pressure port of the pump. Install the pressure hose into this port as shown in Figure 8. Connect the suction hose to the opposite port and to the tank outlet on the res[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 30 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Reusable Non-Skive Type Ends Step 1 Cut hose to length required using a fine tooth hacksaw or cut-off machine. Clean hose bore. Step 2 Liberally lubricate hose cover with hose assembly lube. Place socket in vise[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 31 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED Installation Guide 1. Use elbows and adapters in the installation to relieve strain on the assembly, and to provide easier and neater installations that are accessible for inspection and maintenance. Remember th[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 32 97373-A Page Rev. A INSTALLATION INSTRUCTIONS CONTINUED ELECTRICAL CONNECTIONS Connect all electrical control circuits. The supply conductor should be connected to the accessory terminal of the truck ignition switch through the fifteen amp. circuit breaker provided i[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 33 97373-A Page Rev. A INITIAL START-UP NOTE: Do not load spreader with material. 1. Check over entire unit to be sure all fasteners are in place and properly tightened per “Fastener Torque Chart” in this manual. 2. Make sure no other persons are in vicinity of truc[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 34 97373-A Page Rev. A FIELD TESTING The following procedure is a guide: 1. Field test over any suitable course which allows vehicle to be driven at speeds to be used while spreading. 2. Make sure unit has been properly serviced, that oil reservoir is full and gate valv[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 35 97373-A Page Rev. A GENERAL OPERATING PROCEDURES 1. Make sure unit has been properly serviced and is in good operating condition. Field test unit prior to first use, prior to each spreading season's use, and following overhaul or repair work, to verify that all [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 36 97373-A Page Rev. A LUBRICATION & MAINTENANCE PREVENTATIVE MAINTENANCE PAYS! The handling and spreading of commercial fertilizers is a most severe operation with respect to metal corrosion. Unless a frequent, periodic preventative maintenance program is establish[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 37 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED HYDRAULIC HOSE Hose assemblies in operation should be inspected frequently for leakage, kinking, abrasion, corrosion or any other signs of wear or damage. Worn or damaged hose assemblies should be replaced i[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 38 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED CONVEYOR CHAIN Hose down unit and remove any material build - up on sprockets and under chain. IMPORTANT! The conveyor will move away from the bottom panel if material accumulates under the conveyor or on [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 39 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED #4 CONVEYOR BELT Standard belt for the #4 chain has a nylon fabric that is impervious to moisture, weathering or normal action except oil. • Inspect belt fastener occasionally for we ar or "raveling[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 40 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED Adjustment 1. TENSION Belt tension should be just tight enoug h to prevent slippage — no tighter. If the “flats” on the conveyor drive pulley are visible through the belt, tension is high enough. 2. [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 41 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED PROBLEM 2: (Figure 12) Belt contacts one side at front and contacts other side at rear. SOLUTION: If adjusting as in Problem 1 does not remedy the situation, adjustment of the drive pulley is nece ssary. M[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 42 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CONTINUED If, after continued adjustment, the belt does not track properly, check the following: 1. Check for twisted spreader body. Shims must be placed between spreader cross tubes and the mounting surface to elim[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 43 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED Removal & Replacement Tools and Equipment Required: 1. 1 1/2” Hex Wrench 2. 25 to 30 Feet of 1/4” to 3/8” Rope. 3. 3 or 4 Pieces of 2 x 4 Lumber about 3 Feet Long. 4. 10 Feet of 14 or 16 Gauge Soft[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 44 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED 13. Insert a plastic tube in each splice and across the full width of the belt and pull the two ends together at the center of the rear face of the drive pulley. 14. Insert the splice pin (flexible, plastic [...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 45 97373-A Page Rev. A LUBRICATION & MAINTENANCE CONTINUED LUBRICATION OF BEARINGS Grease in a bearing acts to prevent excessive wear of parts, protects ball races and balls from corrosion and aids in preventing excessive heat within the bearing. It is very importan[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 46 97373-A Page Rev. A LUBRICANT & HYDRAULIC OIL SPECIFICATIONS HYDRAULIC SYSTEM Use premium quality lubricants with 100-200 SUS or 20-43 cSt viscosity at operating temperatures. The hydraulic fluid’s specifications in the table below are for normal operating cond[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 47 97373 - A Page Rev. B LUBRICATION & MAINTENANCE CHART The spread er should be regularly lubricated with the lubricants recommended in this manual in accordance with the following chart: LOCATION PLACES METHOD FREQUENCY Transmission PTO Slip Yoke 1 Grease Gun Week[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 48 97373-A Page Rev. A TROUBLESHOOTING Symptom : Spinner motors do not turn when spinner control valve is in running position or conveyor does not run in manual mode. See reasons 1, 2, 3, 4, 5, 7, 8 & 9. Symptom : Spinners turn but conveyor does not run in manual mo[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 49 97373-A Page Rev. A TROUBLESHOOTING CONTINUED Reason : Correction : 1. Hydraulic oil level low. Add hydraulic oil to reservoir up to “Full” mark. 2. Shut -Off valve on oil reservoir not open. Open valve fully by turning counter -clockwise until it stops. 3. Hydra[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 50 97373-A Page Rev. A TROUBLESHOOTING CONTINUED Reason : Correction : 14. Defective spinner control valve. Replace valve metering spool spring. If no improvement, replace spinner control valve. 15. Cab control is for conveyor only— spinners run anytime vehicle engine[...]

Please Give Part No., Description and Unit Serial No. HIGHWAY EQUIPMENT COMPANY 51 97373-A Page Rev. A STANDARD TORQUES NATIONAL COARSE (NC) CAP SCREWS CAP SCREW GRADE IDENTIFICATION - MARKINGS ON HEAD SAE GRADE 2 NO MARKINGS SAE GRADE 5 THR EE MARKS - 120 DEGREES APART SAE GRADE 8 SIX MARKS - 60 DEGREES APART USE GRADE 2 TORQUES FOR STAINLESS STEE[...]

Please Give Part No., Description and Unit Serial No. 52 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A INSTRUCTIONS FOR ORDERING PARTS Order from the AUTHORIZED DEALER in your area. 1. Always give the pertinent model and serial number of the spreader. 2. Give part name, part number and the quantity required. 3. Give the correc t street address to w[...]

Please Give Part No., Description and Unit Serial No. 53 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MOUNTING ANGLE ITEM PART NO. DESCRIPTION QTY 1 31856 Angle – Mounting 4 2 20131 Cap Screw - 1/2 x 2 12 3 20695 Washer – Flat 1/2 12 4 20680 Washer – Flat 1/2 12 5 81847 Angle – Mounting 2 6 81000 Spring 4 7 81848 Mounting – Bar 2 8 41762[...]

Please Give Part No., Description and Unit Serial No. 54 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FEEDGATE AND JACK 1 2 3 4,5 6 7 8,9 10,11 12,13,14 JACK[...]

Please Give Part No., Description and Unit Serial No. 55 HIGHWAY EQUIPMENT COMPANY 97373 - A Pa ge Rev. A FEEDGATE AND JACK CONTINUED ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 1 2885 36384 36384 Slide - Feedgate RH 1 2884 36384 36384 Slide - Feedgate LH 1 2 NA 36385 36385 Guide - Feedgate 2 3 98508 98509 98510 Feedgate Weldment 1 4 85002 85002[...]

Please Give Part No., Description and Unit Serial No. 56 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A #5 BOTTOM ITEM PART NO. DESCRIPTION QTY CS SS 53982 53982 #5 Belt Assembly – 10’ Unit 53983 53983 #5 Belt Assembly – 11’ Unit 53984 53984 #5 Belt Assembly – 12’ Unit 55454 55454 #5 Belt Assembly – 12’6” Unit 53985 53985 #5 Belt A[...]

Please Give Part No., Description and Unit Serial No. 57 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A #5 BOTTOM CONTINUED ITEM PART NO. DESCRIPTION QTY CS SS 10 20319 36409 Bolt – Carriage 3/8 x 1 1/4 12 11 20712 36420 Washer – Lock 3/8 12 12 20644 36414 Nut – Hex 3/8 12 36507 36507 Take-up Assembly, Includes Items 13–18 2 13 7895 7895 Bra[...]

Please Give Part No., Description and Unit Serial No. 58 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR IDLER 8 1 11 3 5 2 4 7,10 6 9 12,13,14 12,13,14 ITEM PART NO. DESCRIPTION QTY CS SS 1 36508 36508 Chain Tightener Weldment 2 2 7895 7895 Take-up Weldment 2 3 39110 39110 Nut Weldment 2 4 20925 20925 Pin – Roll 1/4 x 1 1/2 2 5 30725 3072[...]

Please Give Part No., Description and Unit Serial No. 59 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR DRIVE 11,12 6 1 7,8,9 10 13,14 3,4,5 2 15,16 6 2 3,4,5 7,8,9 1 ITEM PART NO. DESCRIPTION QTY CS SS 1 77899 77899 Shaft – Drive Single Pinion 1 98090 98090 Shaft – Drive Dual Pinion 1 2 6465 6465 Bearing 2 3 88276 88276 Sprocket 2 4 20[...]

Please Give Part No., Description and Unit Serial No. 60 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A ENCODER 1 2 3 ITEM PART NO. DESCRIPTION QTY 1 88247 Bracket – Rear Shaft 1 2 56263 Sleeve – Rate Sensor 1 3 86772 Encoder – 180 with Hardware 1 86772-X1 Encoder – 360 with Hardware 1 NOTE: #2, #3 and #4 Conveyors only.[...]

Please Give Part No., Description and Unit Serial No. 61 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR CHAIN OILER 9 1 10 11,12,13 14 3 2 5 8 5 6 14 14 7 4 14 ITEM PART NO. DESCRIPTION QTY 98052 Oiler – Assembly 1 98051 Tank – Weldment Oiler 1 2 82917 Valve – Shut-off 1 3 21990 Elbow – Street 45 ° 1 4 97802 Connector – Male 2 5 [...]

Please Give Part No., Description and Unit Serial No. 62 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A PINTLE CHAIN CONVEYOR 2 4 5 4 5 3 1 2 4 5 4 5 1 #2 – Cross bars every other link #3 – Cross bars every link ITEM PART NO. DESCRIPTION QTY #2 #3 Chain – Assembly 1 81869 81884 10’ Unit 1 81870 81885 11’ Unit 1 81871 81886 12’ Unit 1 818[...]

Please Give Part No., Description and Unit Serial No. 63 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR CHAIN ITEM PART NO. DESCRIPTION QTY 1 #4 BOC Chain – Conveyor Assembly 97067 10’ Unit 1 97068 11’ Unit 1 97069 12’ Unit 1 97070 12’6” Unit 1 97071 13’ Unit 1 97072 14’ Unit 1 97073 15’ Unit 1 97074 16’ Unit 1 2 81403 C[...]

Please Give Part No., Description and Unit Serial No. 64 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CHAIN SHIELDS C B A ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS Chain Shield – RH #2 & #3 Chain 1 97713-AC 97730-AC 97747-AC 10’ Unit 1 97713-AD 97730-AD 97747-AD 11’ Unit 1 97715-AA 97732-AA 97749-AA 12’ Unit 1 97714 97716 97720 12[...]

Please Give Part No., Description and Unit Serial No. 65 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CHAIN SHIELDS CONTINUED ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 2 Chain Shield – RH #4 BOC 97815 97833 97851 10’ Unit 1 97816 97834 97852 11’ Unit 1 97817 97835 97853 12’ Unit 1 97873 97874 97875 12’6” Unit 1 97818 97836 97854 1[...]

Please Give Part No., Description and Unit Serial No. 66 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FRONT WIPER 1 2 3 4 ITEM PART NO. DESCRIPTION QTY CS 409 304 1 39426 39426 39426 Belt – Front Wiper 1 2 39408 43605 54230 Retainer – Front Wiper Belt 1 3 20583 32466 32446 Screw – Truss 1/4 x 3/4 5 4 20642 36412 36412 Nut – Hex 1/4 5[...]

Please Give Part No., Description and Unit Serial No. 67 HIGHWAY EQUIPMENT COMPANY 97373 - A Page Rev. B REAR WIPER - #2 & #3 CONVEYORS 3 2 1 4,5 BOTTOM VIEW DETAIL 1 6,7,8 3 9 11,12,13 5,10 ITEM PART NO. DESCRIPTI ON QTY CS SS 98083 98084 Rear Lip Group 96741 96741 Rear Wiper Group 1 98049 98050 Lip – Weldment Rear 1 2 98000 98000 Sealer –[...]

Please Give Part No., Description and Unit Serial No. 68 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS & MUDFLAPS – TRUCK & SEMI-FLOAT TIRES ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS Fender – Truck Tires for: 1 81416 81441 81464 10’ Unit 2 81417 81442 81465 11’ Unit 2 81418 81443 81466 12’ Unit 2 81419 81444 81467 13?[...]

Please Give Part No., Description and Unit Serial No. 69 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS & MUDFLAPS – TRUCK & SEMI-FLOAT TIRES CONTINUED ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 2 83124 83124 83124 Material - Non-skid Inches AR 3 46445 46445 46445 Angle – Mounting AR 81428 81428 81428 Angle – Mounting Long [...]

Please Give Part No., Description and Unit Serial No. 70 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS – FULL & SUPER FLOATATION TIRES 1 2 4 3 8 9 10 11 6 7 5 3 3 ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 1 Fender - RH, Full for: 81554 81582 81606 10’ Unit 1 81555 81583 81607 11’ Unit 1 81556 81584 81608 12’ Unit 1 81557 81[...]

Please Give Part No., Description and Unit Serial No. 71 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A FENDERS – FULL & SUPER FLOATATION TIRES CONTINUED ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 2 Fender - LH, Full for: 81697 81720 81742 10’ Unit 1 81698 81721 81743 11’ Unit 1 81699 81722 81744 12’ Unit 1 81700 81723 81745 13’ Un[...]

Please Give Part No., Description and Unit Serial No. 72 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A INVERTED “V” ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 1 82625 82626 82626 Bar - Adjusting. Weldment AR 2 20692 36424 36424 Washer - Flat, 5/16 AR 3 20677 42221 42221 Nut - Hex, 5/16 Lock AR 4 20291 42639 42639 Bolt - Carriage, 5/16 x 1 A[...]

Please Give Part No., Description and Unit Serial No. 73 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CAB SHIELD ITEM PART NO. DESCRIPTION QTY CS 409 SS 304 SS 81910 81912 81911 Cab Shield Assembly - 57” Height 1 81913 81915 81914 Cab Shield Assembly - 63” Height 1 81916 81918 81917 Cab Shield Assembly - 69” Height 1 1 81901 81903 81902 Pane[...]

Please Give Part No., Description and Unit Serial No. 74 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A LADDER ITEM PART NO. DESCRIPTION QTY 46458 Group - Ladder 46460 Group - Ladder for Units with Raised Fenders 53955 Group - Ladder for 96” Wide Units 53951 Group - Ladder for 96” Wide Units with Raised Fenders 1 72795 Ladder - Upper 1 2 72777 L[...]

Please Give Part No., Description and Unit Serial No. 75 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A HILLSIDE FLOW DIVIDER ITEM PART NO. DESCRIPTION QTY 1 36413 Nut – Hex 5/16 SS 4 2 36419 Washer – Lock 5/16 SS 4 3 36424 Washer – Flat 5/16 SS 8 4 34580 Cap Screw - 5/16 x 1 SS 6 5 56879 Bracket – Clamp SS 1 6 56880 Angle – Clamp SS 1 7 5[...]

Please Give Part No., Description and Unit Serial No. 76 HIGHWAY EQUIPMENT COMPANY 97373 - A Page Rev. A MATERIAL DIVIDER 2 1 5 4 3 6 8 10 11 7 9 10 ITEM PART NO. DESCRIPTION QTY CS SS 87107 87107 Divider – Material Assembly , Includes Items 1 & 2 1 87037 87037 Divider – Weldment 1 2 87045 87045 Deflector – Rear Weldment 1 3 36425 36425 W[...]

Please Give Part No., Description and Unit Serial No. 77 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER GUARD & SHIELDS 14 15 13 4 5 6 8 4 6 8 1 2 3 4 5 7 9 10 11 12 4,5,6,8 ITEM PART NO. DESCRIPTION QTY CS SS 1 87026 87026-X1 Guard – Center Section Weldment 1 2 87027 87027-X1 Guard – RH Weldment 1 3 87031 87031-X1 Guard – LH Weldm[...]

Please Give Part No., Description and Unit Serial No. 78 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A 24” HYDRAULIC FANS 1 2 3 4 5 6 7 8 9 10 10 11,13 11,12,14 16,17,18,19 22 21 23 33 31 31 32 37 39,40 34 13 15 11,12,14 24 30 36 35 25 19 28,29 26,27 20 38 ITEM PART NO. DESCRIPTION QTY CS SS 87094 87093 24” Hydraulic Fan Assembly NOTE: Assembly[...]

Please Give Part No., Description and Unit Serial No. 79 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A 24” HYDRAULIC FANS CONTINUED ITEM PART NO. DESCRIPTION QTY CS SS 7 87170 87170 Jack – Coated Assy 1 8 87053 87053 Angle – Valve Mount 1 9 43510 43510 Valve – Flow Divider 1 10 23800 23800 Motor – Hydraulic 2 11 20128 36402 Cap Screw - 1/[...]

Please Give Part No., Description and Unit Serial No. 80 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER SENSOR GUARD REMOVED FOR CLARITY 3 4,6,7,8 1 2 5,7,8 ITEM PART NO. DESCRIPTION QTY 97310 Sensor – Kit Spinner 1 89011 Sensor – Assembly 1 2 89009 Cable – Sensor Extension 1 3 86672 Bracket 1 4 42448 Cap Screw – 1/4 x 1-1/2 SS 2 5 3[...]

Please Give Part No., Description and Unit Serial No. 81 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A RESERVOIR 1 2 3 4 7 6 8 9 7 8 5 9 ITEM PART NO. DESCRIPTION QTY CS SS 86484 86484 Reservoir Assembly, Includes Items 1, 2, 4 & 10 1 86464 86464 Tank – Weldment 1 2 96747 96747 Cap – Filler 1 3 38575 38575 Gauge – Sight & Temperature [...]

Please Give Part No., Description and Unit Serial No. 82 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. B RESERVOIR/PUMP HYDRAULICS ITEM PART NO. DESCRIPTION QTY 1 98520 Tube Assembly for: 10’ Unit 1 98521 11’ Unit 1 98522 12’& 12’6” Units 1 98523 13’ Unit 1 98524 14’ Unit 1 98525 15’ Unit 1 98525 16’ Unit 1 2 98111 Tube Assembly[...]

Please Give Part No., Description and Unit Serial No. 83 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. B RESERVOIR/PUMP HYDRAULICS CONTINUED ITEM PART NO. DESCRIPTION QTY 3 29803 Adapter - O-ring 1 4 98109 Valve – Relief 3100 PSI 1 5 29840 Adapter - 90 ° Elbow 1 6 81336 Hose - 1” Dia. x 17 7/8” 1 7 34761 Fitting - Socketless 1 8 29807 Adapter [...]

Please Give Part No., Description and Unit Serial No. 84 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A TWIN SPINNER HYDRAULICS 1 1 6 2 4 3 9 10 11 9 6 8 9 12 10 9 5 7 PRESSURE FROM CONTROL VALVE RETURN TO TANK 14 13 15 16 ITEM PART NO. DESCRIPTION QTY 1 23800 Motor - Spinner 2 2 43510 Valve - Flow Divider 1 3 29788 Adapter 1 4 29847 Adapter - 90 °[...]

Please Give Part No., Description and Unit Serial No. 85 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL HYDRAULICS – SINGLE PINION ITEM PART NO. DESCRIPTION QTY 1 32485 Valve – Control 1 2 29803 Adapter – Connector 1 3 29781 Adapter – Tee 1 4 20011 Cap Screw – 1/4 x 2 1/2 2 5 20676 Nut – Lock, 1/4 2 6 81340 Hose – R[...]

Please Give Part No., Description and Unit Serial No. 86 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL HYDRAULICS – DUAL PINION ITEM PART NO. DESCRIPTION QTY 1 32485 Valve - Control 1 2 29803 Adapter - Connector 1 3 29781 Adapter - Tee 1 4 20011 Cap Screw - 1/4 x 2 1/2 2 5 20676 Nut - Lock, 1/4 2 6 42996 Hose - Return Assembly[...]

Please Give Part No., Description and Unit Serial No. 87 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL HYDRAULICS – DUAL PINION CONTINUED ITEM PART NO. DESCRIPTION QTY 10 79759 Adapter - 90 ° Tapped 1 11 29847 Adapter - 90 ° Elbow 1 12 29838 Adapter - 90 ° Elbow 1 13 29753 Adapter - Connector 1 14 56107 Hose Assembly 1 15 2[...]

Please Give Part No., Description and Unit Serial No. 88 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A RAVEN CONTROL HYDRAULICS – SINGLE PINION Refer to “Reservoir/Pump Hydraulics” for tube assemblies.[...]

Please Give Part No., Description and Unit Serial No. 89 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A RAVEN CONTROL HYDRAULICS – SINGLE PINION CONTINUED ITEM PART NO. DESCRIPTION QTY 1 86771-X1 Valve – Servo Raven 25 GPM 1 96694 O-Ring – Kit 1 96695 Cover – Motor Drive 1 2 32485 Valve – Control 1 3 34501 Cap Screw – 1/4 x 2-1/2 2 4 420[...]

Please Give Part No., Description and Unit Serial No. 90 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – SINGLE PINION Refer to “Reservoir/Pump Hydraulics” for tube assemblies.[...]

Please Give Part No., Description and Unit Serial No. 91 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – SINGLE PINION CONTINUED ITEM PART NO. DESCRIPTION QTY 1 29773 Adapter – Elbow 90 ° 1 2 29850 Adapter – Tee 2 3 29807 Adapter – Elbow 90 ° 1 4 29840 Adapter – Elbow 90 ° 1 5 78948 Valve – Dump with Relief 1 6[...]

Please Give Part No., Description and Unit Serial No. 92 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – DUAL PINION Refer to “Reservoir/Pump Hydraulics” for tube assemblies.[...]

Please Give Part No., Description and Unit Serial No. 93 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MANUAL DUAL HYDRAULICS – DUAL PINION CONTINUED ITEM PART NO. DESCRIPTION QTY 1 29773 Adapter – Elbow 90 ° 1 2 29850 Adapter – Tee 2 3 29807 Adapter – Elbow 90 ° 1 4 29840 Adapter – Elbow 90 ° 1 5 78948 Valve – Dump with Relief 1 6 2[...]

Please Give Part No., Description and Unit Serial No. 94 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SINGLE PINION GEAR CASE ITEM PART NO. DESCRIPTION QTY 43501 Gear Case – Assembly Mark series (shown) 1 2564 Cap - Breather 1 2 6031 Plug - Pipe 2 3 20040 Cap Screw - 5/16 x 2 9 4 20711 Washer - Lock, 5/16 9 5 27465 Bushing - Pipe, 1/8” x 7/8X [...]

Please Give Part No., Description and Unit Serial No. 94B HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A GEAR CASE – SINGLE PINION ITEM PART NO. DESCRIPTION QTY 36671 Gear Case – Assembly Single Pinion Style I Style II 304269-AA 304269-AB Parts – Service, Includes 1–17 1 37001 304559 Housing – Outboard 1 2 37002 304560 Housing – Inboard [...]

Please Give Part No., Description and Unit Serial No. 95 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A DUAL PINION GEAR CASE ITEM PART NO. DESCRIPTION QTY 55971 Gear Case – Assembly Mark series (shown) 1 2564 Cap - Breather 1 2 6031 Plug - Pipe 2 3 20040 Cap Screw - 5/16 x 2 10 4 20711 Washer - Lock, 5/16 10 5 27465 Bushing - Pipe, 1/8” x 7/8X [...]

Please Give Part No., Description and Unit Serial No. 95B HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A GEAR CASE – DUAL PINION ITEM PART NO. DESCRIPTION QTY 37985 Gear Case – Assembly Dual Pinion Style I Style II 304268-AA 304268-AB Parts – Service, Includes 1–17 1 38983 304557 Housing – Outboard 1 2 38982 304558 Housing – Inboard 1 3 [...]

Please Give Part No., Description and Unit Serial No. 96 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER MOTOR ITEM PART NO. DESCRIPTION QTY 23800 Motor Assembly 1 33777 Ring - Retainer 1 2 28485 Shaft 1 3 33809 Seal - Excluder 1 4 71980 Seal 1 23940 Tool Seal Installation (Required to Install Item 4) 5 28494 “O” Ring 1 6 41014 Cone - Bea[...]

Please Give Part No., Description and Unit Serial No. 97 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER MOTOR CONTINUED ITEM PART NO. DESCRIPTION QTY 10 6089 Ring - Snap 1 11 28490 Plate - Shaft End 1 12 58797 Plug 2 13 28495 Bushing 1 14 23806 Bearing 4 15 23819 Seals - Pocket (Makes 12 Seals) 1 16 23818 Plate 2 17 23820 Gasket 2 18 28498 H[...]

Please Give Part No., Description and Unit Serial No. 98 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR MOTOR ITEM PART NO. DESCRIPTION QTY 55970 Motor - Hydraulic, 1” 55972 Motor - Hydraulic, 1” Modified 82459 Motor - Hydraulic, 1 1/4” 82462 Motor - Hydraulic, 1 1/4” Modified 38897 Motor - Hydraulic, 1 1/2” 46395 Motor - Hydrauli[...]

Please Give Part No., Description and Unit Serial No. 99 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A CONVEYOR MOTOR CONTINUED ITEM PART NO. DESCRIPTION QTY 6 37385 Race - Bearing 1 7 37401 Bearing - Thrust Needle 1 8 3065 Key 1 9 37386 Shaft - Output Keyed 1 10 73480 Seal - “O” Ring 3 11 47062 Drive (Used on 1” Motors) 1 83014 Drive (Used o[...]

Please Give Part No., Description and Unit Serial No. 100 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A SPINNER CONTROL VALVE ITEM PART NO. DESCRIPTION QTY 32485 Valve - Hydraulic 1 N.S. Body - Adjustable Divider 1 2 20735 Screw - Set, 1/4 x 1/4 1 3 24555 Plug 2 4 24556 Spring 1 5 24557 Spool - Rotary 1 28474 Kit - Seal (Includes Items 6 & 7) 1[...]

Please Give Part No., Description and Unit Serial No. 101 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A LIGHTS ITEM PART NO. DESCRIPTION QTY 1 6114 Cluster - Light, Red 1 2 20572 Screw - Machine 3/16 x 3/4 33 3 20709 Washer - Lock 3/16 33 4 20641 Nut - Hex 3/16 33 5 21986 Grommet - Rubber AR 6 6198 Clamp - Wire AR 7 38611 Bracket - Front Light, Amb[...]

Please Give Part No., Description and Unit Serial No. 102 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A DECALS 3 2 4 8 NEW LEADER 10 9 11 12 17 19 13 14 16 - ON RIGHTHAND SIDE ONLY 7 5 6 1 NEW LEADER L2020G 4 18 21 17 21 19 20 15[...]

Please Give Part No., Description and Unit Serial No. 103 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A DECALS CONTINUED ITEM PART NO. DESCRIPTION QTY 1 368 Decal - Flying Material 1 2 364 Decal - Warning, Stay Out of Box 2 3 150034 Decal - Caution, Improper Operation 1 4 321 Decal - Caution, Material to be Spread 1 5 6541 Decal - Oil Lube Chart 1 [...]

Please Give Part No., Description and Unit Serial No. 104 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY - CONTROL VALVE/GEAR CASE ITEM PART NO. DESCRIPTION QTY 1 88378 Control Valve/Dual Gear Case, 1 1/4 Motors Assy 1 * 88376 Control Valve/Single Gear Case, 1 1/2 Motor Assy 1 2 89758 Valve Assembly 1 3 55971 Gear Case [...]

Please Give Part No., Description and Unit Serial No. 105 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY - VALVE[...]

Please Give Part No., Description and Unit Serial No. 106 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY – VALVE CONTINUED ITEM PART NO. DESCRIPTION QTY 1 89758 Valve Assembly 1 2 84934 Reed Switch Board 1 3 84935 Bolt 2 4 84936 Housing 1 5 44483 Screw – Machine 4 6 83645 Screw – Machine 1 7 20724 Washer – Seal [...]

Please Give Part No., Description and Unit Serial No. 107 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL VALVE ASSEMBLY – VALVE ADAPTER ITEM PART NO. DESCRIPTION QTY 1 84940 Valve Adapter Kit 1 2 44440 Pulley – Drive 1 3 44439 Belt – Timing 1 4 84941 Pulley – Timing 1 5 84942 Adapter 1 6 44445 Seal 1[...]

Please Give Part No., Description and Unit Serial No. 108 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK SERIES CONTROL VALVE ASSEMBLY - IDLER ITEM PART NO. DESCRIPTION QTY 1 83640 Idler Assembly 1 2 44431 Spacer 1 3 44433 Bushing 2 4 44434 Gear – Resolve 1 5 44428 Gear Assembly 1 6 44461 Pin – Roll 1 7 44432 Gear 1 8 44429 Idler Arm Assemb[...]

Please Give Part No., Description and Unit Serial No. 109 HIGHWAY EQUIPMENT COMPANY 97373-A Page Rev. A MARK V CONTROL VALVE ASSEMBLY - VALVE BLOCK ITEM PART NO. DESCRIPTION QTY 1 89759 Block – Valve Assembly 1 2 83627 Plug 1 3 83623 Valve – Relief Assembly 1 4 83624 O-Ring 1 5 83632 Ring – Back-up 1 6 83625 O-Ring 1 7 44464 Ring – Snap 1 8[...]

TA B G 4 Spread P attern[...]