Pioneer SC-1525-K инструкция обслуживания

Operating Instructions audio/video multi-channel receiv er SC-1525_UXJCB.bo ok 1 ページ ２０１０年４ 月２０日　火 曜日　午後７ 時３２分[...]

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “d[...]

VENTILA TION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 20 cm at top, 10 cm at rear , and 20 cm at each side). W ARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. T[...]

This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_A1_En The Safety of Y our Ears is in Y our Hands Get the most out of your e[...]

5 En Contents 01 Before you start Ou r p hiloso p hy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Featu r es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Checking what’s in the box . . . . . . . . . . . . . . . . . . . . 10 Installing the r eceive r . . . . . . . . . . . . . . . . . . . . . . . . 1 0 [...]

6 En Bluetooth ADAPTER fo r Wi r eless Enjoyment of Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Wi r eless music p lay . . . . . . . . . . . . . . . . . . . . . . . . . 51 Pai r ing the Blu etooth ADAP TER and Bluetoo th wi r eless technology device . . . . . . . . . . . . . . . . . . . . 51 Listening to music[...]

7 En 11 The System Setup and Other S etup menus Making r eceive r settings f r om the System Setu p menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Manual s p eake r setu p . . . . . . . . . . . . . . . . . . . . . . . . 84 S p eake r system setting . . . . . . . . . . . . . . . . . . . . . . 85 S p eake r Setting[...]

8 En Flow of settings on the receiver The unit is a full-fledged AV rece iver eq uipped with an ab undance of func tions and termina ls. It can be use d easily after following the procedure belo w to make the connect ions and settings. The colors of the steps indicate the following: Required settin g item Setting to be made as necessary 1 Before yo[...]

Before you start 01 9 En Chapter 1: Before you start Our philosophy Pionee r is dedicated to making you r home theate r listening ex p e r ience as close as p ossible to the vision of the moviemake r s and maste r in g enginee r when th ey c r eated the o r iginal soundt r ack. We do this by foc using on th r ee im p o r tant ste p s: 1 Achieving t[...]

Before you start 01 10 En Checking what’s in the box Please check that you’ve r eceived the follow ing su pp lied accesso r ies: •S e t u p mic r o p hone (cable: 5 m (16.4 ft.)) • Remote cont r ol unit • AAA size IEC R03 d r y cell batte r ies (to confi r m system o p e r ation) x2 •A M l o o p antenna •F M w i r e antenna • iPod c[...]

Controls and displays 02 11 En Chapter 2: Controls and displays Remote control This sectio n ex p lains how to o p e r ate the r emote cont r ol fo r the r eceive r . The remote has been conveniently color-coded accord ing to compo nent con trol using the foll owing s ystem: • White – Receive r cont r ol, TV cont r ol • Blue – Othe r cont r[...]

Controls and displays 02 12 En STANDARD – P r ess fo r Standa r d decoding and to switch va r ious modes ( 2 P r o Logic, Neo :6, etc.) ( p age 53). ADV SURR – Use to switch bet ween the va r io us su rr ound modes ( p age 54). THX – P r ess to select a Home THX listening mode ( p age 54). PHASE CTRL – P r ess to switch on/off Phas e Cont r[...]

Controls and displays 02 13 En PCM – Lights du r ing p layback of PCM signals. MSTR – Lights du r ing p layback of DTS-HD Maste r Audio signals. 4 MULTI-ZONE Lights when the MULTI-ZONE featu r e is a ctive ( p age 63). 5 SOUND Lights when any of the Midnight, Loudness o r tone cont r ols featu r es is selected ( p age 60). Lights when Dialog En[...]

Controls and displays 02 14 En Front panel 1  STANDBY/ON Switches the r eceive r between on and standby. 2 INPUT SELECTOR dial Use to select an in p ut func tion. 3 Indicators ADVANCED MCACC – Lights when EQ is set to ON in the AUDIO PARAMETER menu ( p age 60) . PQLS – Lights when the PQLS featu r e is active ( p age 59). HDMI – Blinks whe[...]

Controls and displays 02 15 En 11 TUNER EDIT Use with /// / ENTER to mem o r ize and name stations fo r r eca ll ( p age 46). 12 BAND Switches between AM and FM r adio bands ( p a ge 46). 13 Listening mode button s AUTO SURR / ALC / STREAM DIRECT – Switches between Auto Su rr ound ( p age 53) , Auto Level Cont r ol mode and St r eam D[...]

Connecting your equipment 03 16 En Chapter 3: Connecting your equipment This r eceive r pr ovides you with many c onnection p ossibilities, but it doesn’t ha ve to be diffic ult. This c ha p te r ex p lain s the kinds of com p onents you can connect to m ake u p you r home thea te r system. Rear panel Note •T h e i n p ut functions below a r e [...]

Connecting your equipment 03 17 En Determining the speakers’ application This unit p ermits you t o bu ild various surround systems, in accordance with the number o f speakers you have. • Be sure to connect speakers to the front left and right channels ( L an d R ). • It is also possi ble to only connect one of the surround back speakers ( SB[...]

Connecting your equipment 03 18 En [E] 5.1 ch annel surro und system & ZONE 2 connection (Multi Zone) • Speaker System setting: ZONE 2 With these connections you can simultan eously enjoy 5.1-channel su rr ound sound in the main zone with ste r eo p laybac k on anothe r com p onent in ZONE 2. (The selection of in p ut devices is limited.) Imp[...]

Connecting your equipment 03 19 En • Place the ce nte r s p eake r above o r below the TV so that the sound of the cente r channel i s localized a t the TV sc r een. Also, make su r e the cent e r s p eake r does not c r oss the line fo r med by the leading edge of the f r ont left and r ight s p eake r s. • It is best to angle the s p eake r s[...]

Connecting your equipment 03 20 En Installing your speaker syste m At the ve r y least, f r ont left and r ight s p eake r s only a r e necessa r y. Note that you r main s u rr ound s p eake r s should always be connected as a p ai r , but you can connect just one su rr ound back s p ea ke r if you like (it must be connected to the left su rr ound [...]

Connecting your equipment 03 21 En Bi-amping your spe akers Bi-am p ing is when you connect the high f r equency d r ive r and low f r equency d r ive r of you r s p eake r s to diffe r ent am p lifie r s fo r bette r c r ossove r p e r fo r mance. You r s p eake r s must be bi-am p able to do this (having se p a r ate te r minals fo r high and low[...]

Connecting your equipment 03 22 En Selecting the Speaker sy stem The f r ont height te r minals can be used fo r f r ont wide an d S p eake r B connec tions, in a ddition to fo r the f r ont height s p eake r s. Also, the su rr ound back te r minals ca n be used fo r bi-am p ing and ZONE 2 co nnections, in addition to fo r the su rr ound back s p e[...]

Connecting your equipment 03 23 En If seve r al video com p onents a r e assigned to the sam e in p ut function (see The Input Setup menu on p age 40), the conve r te r gives pr io r ity to HDMI, com p onent, then com p osite (in that o r de r ). •F o r o p timal vid eo p e r fo r mance, THX r ecommends switching Digital Vi deo Conve r sion (in S[...]

Connecting your equipment 03 24 En Connecting your TV and playback components Connecting using HDMI If you have an HDMI o r DVI (with HDCP) equi pp ed com p onent (Blu- r ay disc p laye r (BD), etc.), you can connect it to this r eceive r using a comme r cially available HDMI ca ble. If the TV and p layback c om p onents su pp o r t the Control wit[...]

Connecting your equipment 03 25 En Connecting your D VD player wi th no HDMI ou tput This diag r am shows connections of a TV (wi th HDM I in p ut) and DVD p lay e r (o r othe r p layback com p onent with no HDMI out p ut) to the r eceive r . • If you want to listen to the sou nd of the TV ove r the r eceive r , connect the r eceive r and TV with[...]

Connecting your equipment 03 26 En Connecting your TV with no HDMI input This diag r am shows connections of a TV (with no HDMI in p ut) and DVD p laye r (o r othe r p layback c om p onent) to the r eceive r . • With these connections, the p ictu r e is not out p ut to the TV even if the DVD p laye r i s c o n n e c t e d w i t h a n H D M I c a [...]

Connecting your equipment 03 27 En Connecting an HDD/DVD recorder, BD recorder and other video sources This r eceive r has two sets of audi o/video in p uts and out p uts suitable fo r connecting analog o r digital video devices, including HDD/DVD r eco r de r s and BD r eco r de r s. When you set u p the r eceive r you’ll need to tell the r ecei[...]

Connecting your equipment 03 28 En Connecting a satelli te/cable receiver or other se t-top box Satellite an d cable r eceive r s, and te rr est r ial digi tal TV tu ne r s a r e all exam p les of so-called ‘set-to p boxes’. When you set u p the r eceive r you’ll need to tell the r eceive r which in p ut you connected the set-to p box to (see[...]

Connecting your equipment 03 29 En Connecting the multichannel analog inputs Fo r DVD Audio and SACD p layback, you r DVD p laye r may have 5.1, 6.1 o r 7.1 channel analog out p uts (de p ending on whethe r you r p laye r su pp o r ts su rr o u n d b a c k c h a n n e l s ) . M a k e s u r e that the p laye r is s et to out p ut multichan nel analo[...]

Connecting your equipment 03 30 En Connecting other audio components This r eceive r has both digital and analog in p uts, allowing you to connect audi o com p onents f o r p layback. When you set u p the r eceive r you’ll n eed to tell the r eceive r which in p ut you connected the com p onent to (see also The Input Setup menu on p age 40). •I[...]

Connecting your equipment 03 31 En Connecting additional amplifiers This r eceive r has mo r e than enough p owe r fo r any home use, but it’s p ossible to add additional am p lifie r s to eve r y channel of you r system using the pr e-outs . Make the connections shown below to ad d am p lifie r s to p owe r you r s p eake r s. • You can use th[...]

Connecting your equipment 03 32 En Connecting ex ternal antenna s To im pr ove FM r ece p tion, connect an exte r nal FM antenna to FM UNBAL 75 Ω . To im pr ove AM r ece p tion, connect a 5 m to 6 m (16 ft. to 20 ft.) length of vinyl-coated wi r e to the AM LOOP te r minals without disconnecting the su pp lied AM loo p antenn a. Fo r the best p os[...]

Connecting your equipment 03 33 En MULTI-ZONE setup using speaker terminals (ZONE 2) You must select ZONE 2 in Speaker sy stem setting on p age 85 to use this setu p . • Connect a TV monitor to the VIDEO ZONE 2 OUT jacks on this receiver. 1 You should have a p ai r of s p eake r s attached to the su rr ound back s p eake r te r minals as shown be[...]

Connecting your equipment 03 34 En Connecting Optional Bluetooth ® ADAPTER When the Blueto oth ADAPTER (Pion ee r Model No. AS- BT100) 1 is connected to this r eceive r , a pr oduct equi pp ed with Bluetooth wi r eless technology ( p o r t able cell p hone, digital music p laye r , etc .) can be used to listen to music wi r elessly. 2 • Switch t[...]

Connecting your equipment 03 35 En Connecting an iPod This r eceive r has a dedicated iPod te r minal that will allow you to cont r ol p layback of audio content f r om you r iPod using the cont r ols o f this r eceive r . • Switch the receiver into standby then use the supplied iPod cable to connect your iPod to th e iPod/ iPhone/USB terminal on[...]

Connecting your equipment 03 36 En Connecting an IR receiver If you kee p you r ste r eo com p onents in a cl osed cabinet o r shelving unit, o r you wish to use the sub zone r emote cont r ol i n anothe r zone, you can use an o p tiona l IR r eceive r (such as a Niles o r Xante ch unit) to cont r ol you r system instead of the r emote senso r on t[...]

Connecting your equipment 03 37 En Switching components on and o ff using the 12 volt trigger You can connect com p onents in you r system (such as a sc r een o r pr ojecto r ) to this r eceive r so t hat they switch on o r off using 12 volt t r igge r s when you select an in p ut function. Howeve r , you must s p ecify which in p ut functions swit[...]

Basic Setup 04 38 En Chapter 4: Basic Setup Changing the OSD display language (OSD Language) The language used on the G r a p hical Use r Inte r face sc r een can be changed. •T h e e x p lanations in these o p e r ating inst r uctions a r e fo r when English is selected fo r the GUI sc r een. 1 Switch on the receiver and your TV. Make su r e tha[...]

Basic Setup 04 39 En Make su r e the r e a r e no obstacles between the s p eake r s and the mic r o p hone. If you have a t r i p od, use it to p lace the mic r o p hone so that it’s about ea r level at you r no r mal lis tening p osition. If you do not have a t r i p od, use some othe r object to install the mic r o p hone. 1 The Full Auto MCAC[...]

Basic Setup 04 40 En • If you see an ERR message (o r the s p eake r configu r ation dis p layed isn’t co rr ect), the r e may be a pr oblem with the s p eake r connection. If selecting RETRY doesn’t wo r k, tu r n o ff the p owe r and check the s p eake r connections. If the r e doesn’t seem to be a pr oblem, you can sim p ly use / t[...]

Basic Setup 04 41 En 6 When yo u’re finishe d, proceed to t he settings fo r other inputs. The r e a r e o p tion al settin gs in ad dition to the assi gnment of the in p ut jacks: • Input Name – You can choose to r ename the in p ut function fo r ea sie r identifica tion. Select Rename to do so, o r Defaul t to r etu r n to the system defaul[...]

Basic playback 05 42 En Chapter 5: Basic playback Playing a source He r e a r e the basic inst r uctions fo r p laying a sou r ce (such as a DVD disc) with you r home theate r system. 1 Switch on your system components and receiver. Make su r e that the TV’s video in p ut is s et to this r eceive r . 2 Press on the remote control. 3 Select the in[...]

Basic playback 05 43 En Playing an iPod This r eceive r has the iPod/iPhone/USB te r minal that will allow you to cont r ol p l ayback of audio con tent f r om you r iPod using the cont r ols of this r eceive r . 1 1 Switch on the receiver and your TV. See Connecting an iP od on p age 35. •I t i s a l s o p ossible to o p e r ate the iPod on the [...]

Basic playback 05 44 En Playing a USB device It is p ossible to p lay files 1 using the USB inte r fac e on the f r ont of this r eceive r . 1 Switch on the receiver and your TV. See Connecting a USB device on p age 3 5. 2 2 Press iPod USB on the rem ote control to switch the receiver to the iPod/USB . 3 Loading a pp ea r s in the GUI sc r een as t[...]

Basic playback 05 45 En Slideshow Setup Make the va r ious settings fo r p laying sl ideshows of p hoto files he r e. 1U s e / to select ‘ Slideshow Setup ’ from th e USB Top menu. 2 Select the setting you want. • Theme – Add va r ious effects to the sli deshow. • Interval – Set the inte r val fo r switching the p hotos. This may [...]

Basic playback 05 46 En Listening to the radi o The following ste p s show you how to tune in to FM and AM r adio b r oadcasts using t he automatic (sea r ch) and manual (ste p ) tuning functions. If you al r eady know the f r equency of the station you want, see Tuning directly to a station below. Once you a r e tuned to a statio n you can memo r [...]

Basic playback 05 47 En 2P r e s s T.EDIT ( TUNER EDIT ). The dis p lay shows PRESET NAME , then a blinkin g cu r so r at the fi r st cha r acte r p osition. 3 Input the name you want. Use / t o s e l e c t a c h a r acte r , / to set the p osition, and ENTER to confi r m you r selectio n. Tip •T o e r ase a station name, sim p ly r e[...]

Basic playback 05 48 En Saving channel preset s This r eceive r can memo r ize u p to 63 channels, sto r ed in seven banks, o r classes (A to G) of 9 channels each. 1 1 Select the channel you want to memorize. See Selecting channels and browsing by genre on p age 47. 2 Press T.EDIT . The dis p lay shows a blinking memo r y class. 3 Press CLASS to s[...]

Basic playback 05 49 En •T h e c u rr entl y selected cha nnel is automa tically chosen (without pr essing ENTER ) afte r five seconds. Saving channel presets This r eceive r can mem o r ize u p to 63 channels, sto r ed in seven banks, o r classes (A to G) o f nine channels each. 1 1 Select the channel you want to memorize. See Selecting ch annel[...]

Basic playback 05 50 En 2U s e / to select the Internet radio station to play back, and then pr ess ENTER . P r ess / to sc r oll u p and down the list and sele ct the desi r ed item . When you pr ess ENTER , p layback sta r ts with th e p layback sc r een being dis p layed fo r the selected item. De p ending on the Inte r net line cond[...]

Basic playback 05 51 En Bluetooth ADAPTER for Wireless Enjoyment of Music Wireless music play When the Bluetooth ADAPTER (Pionee r Mode l No. AS- BT100) 1 is connected to this unit, a pr oduct equi pp ed with Bluetooth wi r eless technology ( p o r table cell p hone, digital mu sic p laye r , etc.) can be used to listen to music wi r elessly. Also,[...]

Basic playback 05 52 En 9 From the Bluetooth wireless technology device list, select Bluetooth ADAPTER and enter the Passcode selected in step 5. 1 Listening to music contents of a Bluetooth wireless technology devi ce with your system 1 Press ADAPTER on the remote control to switch the receiver to ADAPTER PORT input. 2 2F r o m t h e Bluetooth wir[...]

Listening to your system 06 53 En Chapter 6: Listening to your system Important • The listening modes and many featu r es desc r ib ed in this section may not be available de p ending on the cu rr ent sou r ce, settings a nd status of the r eceive r . Auto playback The r e a r e many ways to listen back to so u r ces using this r eceive r , but t[...]

Listening to y our system 06 54 En • Neural Surround – U p to 7.1 channel sound (su rr ound back), es p ecially suited to music sou r ces 1 • XM HD Surround – U p to 7.1 channel sound, es p ecially suit ed to music sou r ces 2 With multichannel sources, if you have connected surround back, front height or front wide speakers , yo u can sele[...]

Listening to your system 06 55 En • SCI-FI – Designed fo r science fiction with lots of s p ecial effects • MONO FILM – C r eates su rr ound sound f r om mon o soundt r acks • ENT.SHOW – Suitable fo r musical sou r ces • EXPANDED – C r eates an ext r a wide ste r eo field • TV SURROUND – P r ovides su rr ound sound fo r both mon[...]

Listening to y our system 06 56 En • PURE DIRECT – Plays back unmodifi ed sound f r om sou r ce with only minimal digital t r eatment. No sound is out p ut f r om the S p eake r B in this mode. Selecting MCACC presets •D e f a u l t s e t t i n g : MEMORY 1 If you have calib r ated you r system fo r diffe r ent listening p ositions, you can s[...]

Control with HDMI function 07 57 En Chapter 7: Control with HDMI function Synch r onized o p e r ations b elow with a Control with HDMI-com p atible Pionee r TV o r Blu- r ay di sc p laye r o r with a com p onent of anothe r make that su pp o r ts the Control with HDMI functions a r e p ossible when the com p onent is connected to the r eceive r us[...]

Control with HDMI function 07 58 En • OFF – The Control with HDMI is disabled. Synch r onized o p e r ations cannot be used. When th is unit’s p owe r is tu r ned off, audio and video of sou r ces connected via HDMI a r e not out p ut. 6 Select the ‘ Control Mod e ’ setting you want. Choose whethe r you want to enable HDM I fo r all link [...]

Control with HDMI function 07 59 En The o p e r ations below can also be used o n Pionee r Control with HDMI-com p atib le TVs. •W h e n t h e r eceive r ’s volume is adjusted o r the sound is muted, the volume status is dis p la yed on the TV’s sc r een. • When the OSD language is switched on the TV, th e r eceive r ’s language setting a[...]

Using other functions 08 60 En Chapter 8: Using other functions Setting the Audi o options The r e a r e a numbe r of additional so und settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, a r e listed in bold. Important • Note that if a setting d oesn’t a pp ea r in the AUDIO PARAMETER menu, it is unavailable due [...]

Using other functions 08 61 En LFE (LFE Attenuate) Some audio sou r ces include ult r a-low bass tones. Set the LFE attenuato r as necessa r y to pr event the u lt r a-low bass tones f r om disto r tin g the sound f r om the s p eake r s. The LFE is not l imited when set to 0 dB, which is the r ecommende d value. When set to –5 dB, –10 dB, –1[...]

Using other functions 08 62 En Setting the Video options The r e a r e a numbe r of additional p ic tu r e settings you can make using the VIDEO PARAMETER menu. The defaults, if not stated, a r e listed in bold. Important • Note that if an o p tion cannot be selected on the VIDEO PARAMETER menu, it is unavaila ble due to the cu rr ent sou r ce, s[...]

Using other functions 08 63 En Switching the speaker terminal s If you selected Speaker B at Speaker system setting on p age 85, yo u can switch betwe en s p eake r s using the SPEAKERS button. If you selected Normal(SB/FH) , Normal(SB/FW) , Front Bi-Amp o r ZONE 2 , the button will sim p ly switch you r main s p eake r te r minals on o r off. The [...]

Using other functions 08 64 En • When the r eceive r is on, 1 make s u r e that any o p e r ations fo r the sub zone a r e done while ZONE and you r selected sub zone(s) show in the dis p lay. If this is not showing, the f r ont p anel con t r ols affect the main zone on ly. 3U s e t h e INPUT SELECTOR dial to select the source for the zone you h[...]

Using other functions 08 65 En Using the sleep timer The slee p time r switches the r eceive r into standby af te r a s p ecified amount o f time so you ca n fall asle e p without wo rr ying about th e r eceive r being left on all night. Use the r emote cont r ol to set the slee p time r . • Press on the remote control, then press SLEEP repeatedl[...]

Using other functions 08 66 En Resetting the system Use this pr ocedu r e to r eset all the r eceive r ’s settings to the facto r y default. Use the f r ont p anel cont r o ls to do this. Set MULTI-ZONE to OFF . • Disconnect the iP od and USB mem o r y device f r om the r eceive r befo r ehand. 1 Switch the receiver into st andby. 2 While holdi[...]

Controlling the rest of your system 09 67 En Chapter 9: Controlling the rest of your system About the Remote Setup men u The Remote Setu p mode is set by pr essing the numbe r button whi le pr essing R.SETUP . The diffe r ent item s on the Remote Setu p menu a r e desc r ibed b elow. Fo r thei r setting pr ocedu r es, r efe r to the ex p lanations [...]

Controlling the rest of your system 09 68 En Setting the remo te to control other components Most com p onents can be assigned to one of the in p ut function buttons (suc h as DVD o r CD ) using the com p onent’s manufactu r e r pr eset code sto r ed in the r emote. Howeve r , the r e a r e cases whe r e only ce r tain functions may be cont r oll[...]

Controlling the rest of your system 09 69 En 3 Point the two remote controls towards each other, then press the button that will be doing the learning on this r eceiver’s remote co ntrol. The LED blinks once and flash es continuously. •T h e r emote cont r ols should be 3 cm (1 inch) a p a r t. 4 Press the corresp onding button on the other rem[...]

Controlling the rest of your system 09 70 En Setting the backlight mode •D e f a u l t s e t t i n g : 1 (normal mode) The backlight lighting p atte r n can be selected f r om among fou r mo d e s , i n c o n s i d e r ation of convenience and batte r y se r vice life. 1 Press and hold R.SETUP , then press “6” for three seconds. The LED flash[...]

Controlling the rest of your system 09 71 En Programming a Multi operation or a shutdown sequence 1 Press and hold R.SETUP , then press “3” for three seconds. The LED flashes con tinuously. • To cancel the pr eset setu p mode pr ess R.SETUP . 2 Press the input f unction button (or  SOURCE button). For Multi o perations, pr ess the i n p ut[...]

Controlling the rest of your system 09 72 En Resetting the remote control set tings Use this pr ocedu r e to r eset all the r emote cont r ol’s settings to the facto r y default. 1 1 Press and hold R.SETUP , then press “0” for three seconds. The LED flashes continuously. 2 Press and hold the ENTER button for t hree seconds. If the LED lights [...]

Controlling the rest of your system 09 73 En a. Cont r ols fo r BD. Button(s) TV TV (Monitor) BD/DVD HDD/DVR VCR SAT /CATV  SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF Numbe r buttons numerics numerics nume rics numerics numerics numerics • (dot) • (dot) KURO LINK CLEAR + -  ENTER (CLASS) ENTER CH [...]

Controlling the rest of your system 09 74 En a. Cont r ols fo r SACD. b. Co nt r ols fo r MD. Button(s) LD CD/CD- R/SACD MD/DAT TAPE  SOURCE POWER ON/OF F POWER ON /OFF P OWER ON/O FF POWE R ON/OFF Numbe r butto ns numerics numerics numerics - • (dot) +10 >10/CLEAR CLEAR b CLEAR ENTER (CLASS) ENTER DISC/ENTER OPEN/CLOSE b ENTER T O P M E N [...]

The Advanced MCACC menu 10 75 En Chapter 10: The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu The Advanced MCACC (Mul ti Channel ACoust ic Calib r ation) system was develo p ed in Pionee r ’s labo r ato r ies with the aim of making it p ossible fo r home use r s to p e r fo r m adjustments of the same level as in a st[...]

The Advanced MCACC menu 10 76 En 2 Select the parameters you want to set. Use / to select the item, then use / to set. • Auto MCAC C – The default is ALL ( r ecommended), but you can limit the system calib r ation to only one setting (to save time) if you want. 1 • EQ Type (only availab le when the Auto MCACC Menu above is EQ Pro [...]

The Advanced MCACC menu 10 77 En If no o p e r ations a r e p e r fo r med fo r 10 seconds while the s p eake r configu r at ion check sc r een is being dis p layed, the Auto MCACC Setu p w ill r esume autom atically. In this case, you don’t need to select ‘ OK ’ and pr ess ENTER in ste p 8. • If you see an ERR me ssage (o r the s p eake r [...]

The Advanced MCACC menu 10 78 En • Standing Wave – Cont r ol ove r ly r esonant low f r equencies in you r listening r oom (see Standing Wave on p age 78). The last two settings a r e s p ecifica lly fo r cust omizing the p a r amete r s ex p lained in Acoustic Calib ration EQ Ad just on p age 79: • EQ Adjust – Manually adjust th e f r eque[...]

The Advanced MCACC menu 10 79 En it r esults in an ove r ly r esonant (‘boo my’) sound. The Standing Wave Cont r ol uses filte r s to r educe the effect of ove r ly r esonant sounds in you r listening a r ea. Du r ing p layback of a sou r ce, you can customize the filte r s used fo r Standing Wave Cont r ol fo r each of you r MCACC pr esets. 1 [...]

The Advanced MCACC menu 10 80 En Using Acoustic Calibration EQ Profess ional 1 Select ‘ EQ Professional ’, then press ENTER . 2 Select an option and press ENTER . • Reverb Measurement – Use this to measu r e the r eve r b cha r acte r istics befo r e and afte r calib r ation. • Reverb View – You can check the r eve r b measu r ements ma[...]

The Advanced MCACC menu 10 81 En Checking MCACC Data At the pr ocedu r e of Automatically cond uc ting optimum sound tuning (Full Auto MCACC) on p age 38, the pr ocedu r e of Automatic MCACC (Expert) on p age 75 o r afte r fine-adjusting at Manual MCACC setup on p age 77, you can check you r calib r ated settings using the GUI sc r een. The data ca[...]

The Advanced MCACC menu 10 82 En 3 Press  to highlight ‘ MCACC ’, then use / to select the MCACC preset you want to check. Output MCACC data Befo r e continuing, make su r e you have com p leted ste p 2 in Checking MCACC Data on p age 81. The data measu r ed with the Advanced MC ACC function is t r ansmitted to the USB device. 1 The 3D[...]

The Advanced MCACC menu 10 83 En Copying MCACC preset data If you want to man ually adjust the Acoustic Calib r ation EQ (see Manual MCACC setup on p age 77), we r ecommend co p ying you r cu rr ent settings 1 to an unused MCACC pr eset. Instead of just a fla t EQ cu r ve, this will give you a r efe r ence p oi nt f r om which to sta r t. 1 Select [...]

The System Setup and Other Setup menus 11 84 En Chapter 11: The System Setup and Other Setup menus Making receiver settings from the System Setup menu The following section desc r ibes how to change the s p eake r - r elated settings manually and make va r io us othe r settings ( in p ut selec tion, OSD lan guage select ion, etc.). 1 Switch on the [...]

The System Setup and Other Setup menus 11 85 En Speaker system setting • Default setting: Normal(SB/FH ) The r e a r e seve r al ways yo u can use the s p eake r te r minals with this r eceive r . In addition to a no r mal home the ate r setu p whe r e they a r e used fo r the f r ont height s p ea ke r s o r f r ont wide s p eake r s, they can b[...]

The System Setup and Other Setup menus 11 86 En • Surr – Select LARGE if you r su rr ound s p eake r s r e pr oduce bas s f r equencies effectively. Select SMALL to send bass f r equencies to the othe r s p eake r s o r subwoofe r . If you didn’t conn ect su rr ound s p eake r s choose NO (the sound of the su rr ound chann els is sent t o the[...]

The System Setup and Other Setup menus 11 87 En X-Curve Most so undt r acks mixed fo r cinema sound too b r ight when p layed back in la r ge r ooms. The X-Cu r ve sett ing acts as a kind of r e-equalization fo r home theate r listening, and r esto r es pr o p e r tonal balance of movie so undt r acks. 1 1 Select ‘ X-Curve ’ from the Manual SP [...]

The System Setup and Other Setup menus 11 88 En IP address/Proxy setting In case the r oute r connected to the LAN te r minal on this r eceive r is a b r oadband r oute r (with a built-in DHCP se r ve r function), sim p ly tu r n on th e DHCP se r ve r function, and you will not need to set u p the netwo r k manually. You must set u p the netwo r k[...]

The System Setup and Other Setup menus 11 89 En The Other Setup menu The Other Setu p menu is whe r e you can make customized set tings to r eflect h ow you a r e using th e r eceive r . 1 Press on the remote control, then press HOME MENU . A G r a p hical Use r Inte r face (GUI) sc r een a pp ea r s on you r TV. Use ///  and ENTE R to [...]

The System Setup and Other Setup menus 11 90 En Flicker Reduction Setup •D e f a u l t s e t t i n g : OFF The GUI sc r een’s r esolution can be inc r eased. If you feel the GUI sc r een is ha r d to see, t r y changing this setting. Note that the r esolution in this s etting only affects the GUI sc r een; it has no influence on the video out p[...]

Additional in formation 12 91 En Chapter 12: Additional information Speaker Setting Guide In o r de r to achieve an even bette r su rr ound effect, it is im p o r tant to accu r ately p osition the s p eake r s and make thei r volume an d tone cha r acte r istics unifo r m so as to finely focus t he multi-channe l sound. The th r ee majo r elements[...]

Additional information 12 92 En Positional relationship betw een speakers and monitor Position of front speakers and monitor The f r ont s p eake r s should be as equidistant as p ossible to the monito r . Position of center speaker and m onitor Since mostly dialogs a r e out p ut f r om the cente r s p eake r , kee p ing the cente r s p eake r as [...]

Additional in formation 12 93 En No sound AMP ERR blinks in the dis p lay, then the p owe r automa tically switches off. The ADVANCED MCACC blinks and the p owe r does not tu r n on. • The r eceive r may have a se r ious pr oble m. Do not t r y switching the r ecei ve r on. Un p lug the r eceive r f r om the wall an d call a Pionee r autho r ized[...]

Additional information 12 94 En Other audio problems No sound f r om one s p eake r .• C h e c k t h e s p eake r connection (see Connecting the speakers on p age 1 9). • Check the s p eake r level settings (see Channel Level on p age 86) . • Check that th e s p eake r hasn’t been set to NO (see Speaker Setting on p age 85). • The channel[...]

Additional in formation 12 95 En ADAPTER PORT Video Can’t select som e In p ut functions by the INPUT SELECTOR on th e f r ont p anel o r the INPUT SELE CT button on the r emote c ont r ol. • Check the Input Skip settings in the Input Se tup men u. • Check the HDMI In p ut assignment in the I n p ut Setu p menu then t r y OFF. The r e seems t[...]

Additional information 12 96 En Settings Professional Calibration EQ graphical output Noisy, inte r mittent, o r disto r ted p ictu r e. • Sometim es a video deck m ay out p ut a noisy video signal (du r ing scanning, fo r exam p le), o r the video quality may just be p oo r (with some video ga me units, fo r exam p le). The p ictu r e quality ma[...]

Additional in formation 12 97 En Displa y Remote control EQ adjustments made using the Manual MCACC setup on p age 77 do no t a pp ea r to change the g r a p hical ou t p ut. • Des p ite level adjustments being made, the filte r s used fo r analys is may not dis p lay these adjustments in the g r a p hical out p ut. Howev e r , these adjustm ents[...]

Additional information 12 98 En Web Control HDMI Sympt oms Causes Remedies To p Menu sc r een is not dis p layed on b r owse r . This r eceive r ’s IP add r ess has not been ente r ed into the b r owse r co rr ectly. Check the r ec eive r ’s IP add r ess and ent e r it co rr ectly in the b r owse r ( p age 8 7). Receive r cannot be o p e r ated[...]

Additional in formation 12 99 En Important information rega rding the HDMI connection The r e a r e cases whe r e you may no t be able to r oute HDMI signals th r ough this r eceive r (this de p ends on the HDMI- equi pp ed com p onent you a r e connecting–check with th e manufactu r e r fo r HDMI com p atibility info r mat ion). If you a r en’[...]

Additional information 12 100 En Internet radio A USB memo r y devic e is not r ecognized. The USB memo r y device does not su pp o r t the mass sto r age class s p ecific ations. T r y using a USB memo r y device com p atible with the mass sto r age class s p ecifications. Note that the r e a r e cases whe r e even the a udio files sto r ed on a U[...]

Additional in formation 12 101 En XM radio messages The Inte r ne t r adio settings sc r een cannot be dis p layed on the com p ut e r Inte r net b r owse r . This r eceive r ’s IP add r ess has not be en ente r ed into the b r owse r co rr ectly. Check the r eceive r ’s IP add r ess and ente r it co rr ectly o n the b r owse r ( p age 87). Jav[...]

Additional information 12 102 En SIRIUS radio messages If the pr oblem is not solved afte r the t r oubleshooting above, if the sc r een f r ee zes unex p ectedly o r if the buttons on the r emote cont r ol o r f r on t p anel sto p wo r king com p let ely, do the fo llowing: •P r ess  STANDBY/ON on the f r ont p anel to tu r n off th e p owe [...]

Additional in formation 12 103 En Surround sound formats Below is a b r ief desc r i p tion of the main su rr ound sound fo r mats you’ll find on BD s, DVDs, satellite, ca ble and te rr est r ial b r oadcasts, and video cassettes. Dolby The Dolby technologies a r e ex p lained below. See www.dolby.com fo r mo r e detailed info r mation. Manufactu[...]

Additional information 12 104 En • THX Surround EX THX Su rr ound EX - Dolby Digital Su rr ound EX is a joint develo p ment of Dolby Labo r ato r ies and the THX Ltd. In a movie theate r , film soundt r acks that have been encoded with Dolby Digital Su rr ound EX technology a r e able to r e pr oduce an ext r a channel which has been added du r i[...]

Additional in formation 12 105 En About SIRI US and X M SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries . All other marks and logos are the property of their respective owners. All rights reserved. SIRIUS and XM subscriptions sold separately. Taxes and a one-time activation fe e may apply. XM t[...]

Additional information 12 106 En Auto Surround, ALC and Stream Direct with diff erent input signal formats The following cha r ts show what you will hea r with diffe r ent i n p ut signal fo r mats, de p ending on the St r eam Di r ect mode (see Using Str eam Dire ct on p age 55) you h ave selected. Stereo (2 cha nnel) signal formats Multichannel s[...]

Additional in formation 12 107 En Preset code list You should have no pr oblem cont r olling a com p onent if you find the manufactu r e r in this list, bu t p lease note that the r e a r e cases whe r e codes fo r the manufactu r e r in the list will not wo r k fo r the mode l that you a r e using. Th e r e a r e also cases wh e r e only ce r tain[...]

Additional information 12 108 En Samsung 0004, 00 05, 00 06, 000 7, 0022, 0032, 0076, 00 77, 0083, 0100, 0110 Sansui 0025 Sanyo 0004, 0050 Sceptre 0072 Scotch 0006 Scott 0004, 00 06, 00 07, 000 8, 0009 , 0090, 0104 Sears 0000, 00 04, 00 06, 000 9, 0101 , 0102, 0103 Sharp 0004, 0006, 00 07, 0014, 0033 Sheng Chia 0014 Shogun 0004 Signature 0001 Sony [...]

Additional in formation 12 109 En VCR Pioneer 1035 ABS 1017 Adventura 1005 Aiwa 1005 Alienware 1017 American High 1004 Asha 1002 Audio Dynamics 1000 Audiovox 1003 Bang & Ol ufsen 1032 Beaumar k 1002 Bell & Howell 1001 Calix 1003 Candle 1002, 1003 Canon 1004 Citizen 1002, 1003 Colort yme 1000 Craig 1002, 1003 Curtis Mathes 1000, 10 02, 100 4[...]

Additional information 12 110 En Satellite Set Top Box (SAT/PVR C ombination) Pioneer 0126, 0128 Bell ExpressVu 6002, 6003 DirecTV 6070, 6110, 6062 , 6113, 6060, 605 9, 6114 , 6115 , 6116 Dish Network System 6002, 6089 Dishpro 6002, 6089 Echostar 6002, 6089, 6003 Expressvu 6002 Hughes Network Systems 6113, 6114, 611 5, 6116 JVC 6003 Motorola 6032 P[...]

Additional in formation 12 111 En Specifications Amplifier Section Continuous averag e power output of 140 watts* per channel, min., at 8 oh ms, from 20 Hz to 20 000 Hz with no more than 0. 08 %** total harmonic distortion. Multi channel simultaneou s p owe r out p ut (1 kHz, 1 %, 8 Ω ) 7 ch total . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Additional information 12 112 En SC-1525_UXJCB.bo ok 112 ページ ２０１０年４ 月２０日　火 曜日　午後７ 時３２分[...]

Additional in formation 12 113 En SC-1525_UXJCB.bo ok 113 ページ ２０１０年４ 月２０日　火 曜日　午後７ 時３２分[...]

Additional information 12 114 En SC-1525_UXJCB.bo ok 114 ページ ２０１０年４ 月２０日　火 曜日　午後７ 時３２分[...]

Additional in formation 12 115 En LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSA in the U.S.A., and by POC in Canada that fail to function properly under normal use due to a manufacturing defe[...]

Printed in <ARB7447-B> T o register your product, find the nearest authorized ser vice location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : P our enregistrer votre produit, trouver le ser vice après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes[...]