Plinius 8100 инструкция обслуживания

Class AB Integrated Amplifier[...]

2[...]

3 CONGRATULATIONS CONGRATULATIONS CONGRATULATIONS CONGRATULATIONS on your decision to become the proud owner of this Plinius 8100 Integrated Amplifier. This manual has been prepared to help you understand the operation of your amplifier, and to provide information about its design and the variety of ways it may be used. We have designed and manufac[...]

4 Introduction .................................................................................................................. ................. Page 3 Precautions ................................................................................................................... ................ Page 5 Amplifier Features – Front Panel ........[...]

5 Please take special note of the following precautions before operating your new amplifier: • The Plinius 8100 Integrated Amplifier can deliver in excess of 100 watts into 8 ohms. This amplifier is also capable of a very large peak current delivery. • The Plinius 8100 Integrated Amplifier operates in Class AB. It is capable of generating heat [...]

6 PLINIU S RECOR D SOURCE VOLUM E xx x TUNER V CR T APE 1 TA P E 2 AUX CD 81 0 0 The front of the Plinius 8100 Integrated Amplifier incorporates all the facilities you will require on a daily basis. F RONT P ANEL L AYOUT S HOWING V OLUME K NOB , R ECORD A ND S OURCE S ELECTORS , D ISPLAY LED’ S A ND M AINS S WITCH MAINS SWITCH The heavy-duty rock[...]

7 RECORD SELECTOR This rotary switch allows recording of any of the six different inputs available on the back panel. Note that when recording, the source that is being listened to will not be interfered with. For example, it is possible to be listening to the CD input whilst recording from the TUNER input. Two tape decks can be connected and dubbi[...]

8 This panel incorporates all the terminals for connecting the input signals from your CD player, tuner, etc, and the outputs to the loudspeakers and mains supply. Please remember that your Plinius 8100 Integrated Amplifier is a high quality electronic instrument capable of an exceptional level of performance. Be sure that you understand your syste[...]

9 TAPE OUTPUTS These RCA outputs are situated next to the tape RCA inputs, and are provided to interface to a pair of line level recording devices. The position of the record selector on the front panel determines from which device a recording is being made. As these tape outputs are always ‘live’, both can be used to record the chosen signal a[...]

10 PLACEMENT AND VENTILATION Your Plinius 8100 operates at a moderately high temperature, especially when being driven hard. The ideal location is upon a rigid stand, or floor mounted away from direct contact with any temperature sensitive materials or deep pile carpets. Ventilation through and around the amplifier should also be kept unimpeded, so[...]

11 It is important that you connect your loudspeakers (outputs) and source components (inputs) to the Plinius 8100 Integrated Amplifier correctly to ensure the amplifier is not damaged, and sounds its best with your system. Now that you have read and familiarised yourself with the connections on the back of the amplifier, as covered in the previous[...]

12 BI-WIRING Bi-wiring uses two pairs of loudspeaker cables for each channel loudspeaker. You will notice that the rear panel of your Plinius 8100 has two pairs of output terminals for this purpose. When using bi-wires, always connect positive (+) to positive (+) and the same for the negative (-) terminals. PHASING (OR POLARITY) It is important to [...]

13 REMOTE CONTROL Provided with your Plinius 8100 is a three function remote control. The two buttons at the top of the remote adjust the volume level, and the button below switches the amplifier in and out of mute. Two AAA batteries power the remote, and these are replaced by removing the two posi-drive screws holding the bottom plate in place. Th[...]

14 MAINS/LINE FUSE A Mains/Line fuse is fitted within the IEC socket on the rear of the amplifier. A small drawer at the bottom of this socket may be removed (after the IEC plug is removed) by levering it out with a flat blade screwdriver. The fuse fitted should be rated at no greater than 5 amps slow blow. IMPORTANT: DO NOT FIT A FUSE WITH A HIGHE[...]

15 Your Plinius 8100 Integrated Amplifier is designed for use with high fidelity loudspeakers. It should not be used to operate with any other type of appliance or equipment. Choice of loudspeakers is one of personal taste, providing the chosen loudspeakers are suitable for use with your amplifier. Be certain that your loudspeakers can handle most [...]

16 100-WATTS RMS PER CHANNEL INTO 8 OHMS. 140-WATTS RMS PER CHANNEL INTO 4 OHMS. BOTH CHANNELS DRIVEN FROM 20Hz TO 20kHz AT LESS THAN 0.1% TOTAL HARMONIC DISTORTION. S D D D D YNAMIC YNAMIC YNAMIC YNAMIC H H H H EADROOM EADROOM EADROOM EADROOM : :: : 1dB or greater at 8 Ω with music. S F F F F REQUENCY REQUENCY REQUENCY REQUENCY R R R R ESPONSE E[...]

17 Bi-wiring ...................................................................................................................... ................ Page 12 Date of Manufacture ............................................................................................................ ...........Page 3 Front Panel Layout............................[...]

18 All operational, technical and descriptive material published here is subject to change at any time without notice. For further product information or queries, please contact us at the address below. PLINIUS PLINIUS PLINIUS PLINIUS products are designed and manufactured by: Audible Technologies Ltd. Audible Technologies Ltd. Audible Technologies[...]