Precor Cardio Theater Integrated Bracket Assembly Instructions EFX LCD инструкция обслуживания

Cardio Theater Integr ated Brac k et Assemb ly Instructions EFX ® Integrated LCD Scr een Option[...]

[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 3 T able of Contents T able of Contents Before Y ou Begin ............................................................................................. 4 Obta ining Servi ce .............................................................................................................. ...[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 4 IMPOR T ANT SAFETY INSTRUCTIONS 1 Before Y ou Begin Thank you f or adding the Precor Cardio Theater Integrated LCD Screen Option to y our EFX ® . This option will add a new dimension to your workout. For proper installation, please read this guide thoroughly and follow the assembly in[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 5 Preparations 2 Important: T o attach the Cardio Theater Integ rated Bracket, ask another adult for help. Do not attempt the assembly by yourself. Remember to read and follow the instructions in this guide. If you do not assemb le the Cardio Theater Integrated Bracket according to these[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 6 Preparing the Unit 3 The illustration shows ho w the Cardio Theater Integrated Bracket will look after you install it on the EFX. This section contains preparation instructions for both the EFX546i and the EFX556i. EFX556i EFX546i Preparing the Unit[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 7 Preparing the EFX546i Preparing the EFX546i 1. Loosen the two screws on the handrail clamp using a ⁵⁄₃₂ -inch hex k ey . Important: Leave the handrails in the clamp. Do not remove the handrail clamp screws! 2. Remov e the front cov er . Loosen and remove the two screws securing[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 8 5. Remove the four fasteners securing the upright suppor t. Use a ¼-inch hex and ½-inch box end wrench to remov e the fasteners . Keep the f asteners together and within easy reach. Important: Ask someone for help before completing the next step . 6. Separate the display console from[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 9 8. Attach the power extension cable to the power connector on the coaxial/power cable. Locate the coaxial/power cable provided with the LCD Screen. One end of the coaxial/power cable has three connectors; the other end has two connectors. Attach the power extension cable to the power c[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 10 11 . Secure the display console. Replace two of the screws at the base of the console bracket. Do not fully tighten the screws. Leave space between the screw head and the display console br ack et. The brack et assembly slides in between the tw o . Note: Once the display is secure, yo[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 11 14 . Continue to feed the cable with its connectors through the lower support. Star t with the coaxial and pow er e xtension connectors. Feed them into the lo wer support. Continue to slide the cable and its connectors so no excess remains at the gap between the upper and lower suppor[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 12 19 . Secure the upright suppor t by replacing the f our fasteners set aside in step 5. 20 . Retighten the two handrail clamp screws. Important: Look underneath the handrail clamp at the gap between the handrails . The area between the ends of the handrails should be no larger than a ?[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 13 22 . Reinstall the front cover and secure it with the two screws remo ved in step 2. Before tightening the front co ver , be sure to fit the lip of the front cover into the tabs along the inside surface of the grommet. T o complete the installation, refer to the instructions on page 1[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 14 Preparing the EFX556i 1. Pry the rubber end cap off the base using a flat head screwdriver . Set the end cap aside. 2. Remov e the front cov er . Loosen and remove the two screws securing the front cov er . Set the front co ver and f asteners aside. 3. Move rubber grommet. Slide the r[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 15 Important: Ask someone for help before completing the next step. 5. Remove the four fasteners securing the upright suppor t. Ask your assistant to hold the upper support while you use a ¼-inch he x and ½-inch bo x end wrench to remov e the four f asteners that secure the upright sup[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 16 10 . Attach the power extension cable to the power connector on the coaxial/power cable. Locate the coaxial/power cable provided with the LCD Screen. One end of the coaxial/power cable has three connectors; the other end has two connectors. Attach the power extension cable to the powe[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 17 13 . Secure the display console. Replace two of the screws at the base of the display console bracket. Do not fully tighten the screws! Leave space between the screw heads and the display console br ack et. The brack et assembly slides in between the tw o . 14 . Reconnect the data cab[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 18 16 . Pull the cable and its two connectors out of the low er suppor t and base tube. Note: Remember to leave about 3 feet (1 meter) of cable hanging out of the hole in the display console bracket. 17 . Secure the upright suppor t by replacing the f our fasteners set aside in step 5. C[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 19 Front cover Upright support 21 . Replace the back cover and rubber grommet. Replace the back cover onto the upright sup- por t. Fit the lip of the back cov er into the tabs along the inside surface of the grommet. Apply pressure to the top of the back cover while you tighten the screw[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 20 4 Install the Bracket Assembly 1. Remov e the brack et cov er . Loosen the bolts on the pivot tube using a ⁷⁄₃₂ -inch hex k e y . Pull the brack et cover aw a y from the assembly . Set it aside. 2. Feed the coaxial/power cable with its three connectors through the brack et ass[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 21 Install the Bracket Assembly 3. Fit the bracket assembly on to the display console bracket. Ask your assistant to lift the bracket assembly and position it along the back of the display console bracket. Make sure the bracket assem- bly slides into place so that the cutouts at the base[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 22 5 Attach the LCD Screen Important: The screen spacer is used only for the Cardio Theater PVS4/5/15 LCD Screen. 1. T o protect the LCD Screen f or the next f ew steps, place it screen side down on a clean work surface. Important: Use proper materials to protect the LCD Screen while you[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 23 6. Fully tighten the bottom two screws. Use a Phillips-head screwdriver to fully tighten the bottom two screws. Leave the top two screws finger tight. 7. Connect the coaxial/power cable connectors to the LCD Screen. Attach the connectors—coaxial, power , and D VD—to the back of th[...]

Cardio Theater Integrated Brac ket Assembly Instructions page 24 6 Reinstall the Bracket Cover 1. Prepare the fasteners for reinstalling the bracket cov er . Push the washers and bearings toward the bolt heads so there is room for the bracket cover to slide in flush against the pivot tube. Important: Keep the brac ket cov er flanges flush with the [...]

Cardio Theater Integrated Brac ket Assembly Instructions page 25 Connect the Controller and the Cables 7 Note: Retrieve the rubber adapter mounts from the bracket assembly package. Retrieve the controller from the LCD Screen package. 1. Connect the controller cable to the controller . A definite click is heard when the connector snaps into place in[...]

[...]

[...]

Cardio Theater Bracket Assembly Lit Kit # CX47836-102 EFX546i and EFX556i 20 June 2005 Precor and Cardio-Theater are registered trademarks of Precor Incor porated. Specifications subject to change without notice. Copyright 2005 Precor Incorporated. Precor web site: www .precor.com Precor Incorporated 20031 142nd Av enue NE P .O. Box 7202 Woodin vil[...]