Renesas H8SX/1638 инструкция обслуживания

H8SX/1638 Group E6 000H PLQP012 0LA-A User System Interface Board HS1638ECN61H User’s Manual Renesas M icrocomput er Developm ent Environm ent System H8SX Family / H8SX/ 1600 Ser ies HS1638EC N61HE REJ10J1870-0300 Revision Date: S ep. 08, 2008 Rev.3.00[...]

Rev. 3.00 Sep. 08, 2008 Page ii of iv REJ10J1870-0300[...]

Rev. 3.00 Sep. 08, 2008 Page iii of vi REJ10J1870-0300 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor g rant[...]

Rev. 3.00 Sep. 08, 2008 Page iv of iv REJ10J1870-0300[...]

Rev. 3.00 Sep. 08, 2008 Page I of VI REJ10J1870-0300 IMPORTANT INFORMATION READ FIRST • READ this user's ma nual befo re using this user system interface board. • KEEP the user's manual handy for future reference. Do not attempt to u se the user s ystem in terface board until y ou fully understand it s mechanism. User Syst em Interf a[...]

Rev. 3.00 Sep. 08, 2008 Page II of VI REJ10J1870-0300 LIMITED WA RRANTY Renesas warrants its user syst em interfa ce boards to be manufactu red in accordance with published specific ations and free from defects in material and/or workmanship. Renesas will repair or replace a ny user system interfac e boards determined to be defective in material an[...]

Rev. 3.00 Sep. 08, 2008 Page III of VI REJ10J1870-0300 State Law : Some states do not allo w the exclusion or limitation of implied warran ties or liability for incidental or c onsequential damages, s o the above limi tation or excl usion may not apply t o you. This warrant y gives you s pecifi c legal rights , and yo u may have ot her rights which[...]

Rev. 3.00 Sep. 08, 2008 Page IV of VI REJ10J1870-0300 SAFETY PAGE READ FIRST • READ this user's ma nual befo re using this user system interface board. • KEEP the user's manual handy for future reference. Do not attempt to use the user sys tem in terface boa rd until you fully understand its mechanism. DEFINITION OF SI GNAL WORDS This[...]

Rev. 3.00 Sep. 08, 2008 Page V of VI REJ10J1870-0300 W ARNING Observe the pr ecautions list ed below. Fai lure to do so will result in a FIRE H AZARD and will damage the us er system and the emul ator product or will r esult in PERSONAL INJURY. The USER PROGRA M will be LOST. 1. Do not repair or remodel the emul ator product by yourself for e lectr[...]

Rev. 3.00 Sep. 08, 2008 Page VI of VI REJ10J1870-0300[...]

Preface The HS1638ECN61H is a us er system interface boa rd that connects a user s ystem for the H8SX/1638 P LQP0120LA-A (former code: F P-120B) package t o the H8SX/1650 E6000H emulator (HS1650EP H60H). Emulati on of the H8SX/1638 group i s only poss ible when thi s user system interface board is c onnected to the HS1650EPH 60H.[...]

Contents Preface ...................................................................................................................... i Section 1 Configuration ........................................................................................... 1 Section 2 Connection Procedures ..............................................................[...]

Secti on 1 Configuration Rev. 3.00 S ep. 08, 2008 Page 1 of 30 REJ10J 1870-0300 Section 1 Configuration Figure 1 and table 1 s how the external appearance and components , respectively, of t he user system interface board for the PL QP0120LA-A package. P lease make sure you have all of these components after you have unpacked t he box. Evaluation-c[...]

Secti on 1 Configuration Rev. 3.00 S ep. 08, 2008 Page 2 of 30 REJ10J 1870-0300 CAUTION Use an NQPACK120SE-ND socket and an HQPACK120SE cover (manufactured by Tokyo Elet ech Corporation) fo r the PLQP0120LA-A-packaged IC so cket on the user syst em. Table 1 HS1638ECN61H C omponen ts No. Component Quantity Remarks 1 User system interface board 1 2 I[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 3 of 30 REJ10J 1870-0300 Section 2 Connection Procedures 2.1 Connectin g the User System Interface Board to the User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected or removed. Before connecting t he two, m[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 4 of 30 REJ10J 1870-0300 To connect the b oard to the u ser system, follow the in structions below. 2.1.1 Installing t he IC Socket After checking the locat ion of pin 1 on the IC s ocket fasten it to the user s ystem before soldering. CAUTION After confirming the locat ion of pin 1 on[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 5 of 30 REJ10J 1870-0300 2.1.2 Soldering the IC Socket After fasteni ng, solder the IC socket for a PLQP0120LA-A package to the us er system. CAUTION Be sure to completely solder the leads so t hat the solder gently covers the leads and forms solder fillets. (Use slightly more solder t[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 6 of 30 REJ10J 1870-0300 2.1.4 Fastening the IC Socket Connector CAUTION 1. Use the screwdriver provided fo r tightening screws. 2. The tightening torque must be 0.054 N•m or less. If the applied torque ca nnot be accurately measured, stop tightening when th e force required to tu rn[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 7 of 30 REJ10J 1870-0300 User system interface board User system Pin 1 Screws (M2 × 10 mm) (for fastenin g the board) IC socket (NQPACK120SE-ND manufactured by Tokyo Eletech Corporation) Figure 3 Connecting the User System In terface B oard to the User System[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 8 of 30 REJ10J 1870-0300 2.2 Exchangi ng the Sp acers of the Evaluati on-Chip B oard After connecting the user system in terface board to the us er system, be careful not to apply load to the user system. Exchange the spacers (2.6MP × 10 mm) of the evaluation-chip board with the space[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 9 of 30 REJ10J 1870-0300 2.3 Connectin g the User System Interface Board to the Evalua tion-Chip Board W ARNING Observe the precautions listed below. Failure t o do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJUR[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 10 of 30 REJ10J 1870-0300 Connector No. UCN1 UCN1 UCN2 UCN2 User system interface board Evaluation-Chip Board Connector No. Board Connector No. Evaluation-chip board Figure 5 Connecting the Us er System In terface Board to the Evaluati on-Chip Board[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 11 of 30 REJ10J 1870-0300 2.4 Recom mended Dim ensions for t he User System Mo unting Pad (Footprint) Figure 6 shows the recommended dimensi ons for the mounting pad (foot print) for the us er system with the IC s ocket for a PLQP0120LA-A package (NQPACK 120SE-ND: manufactured by Tokyo[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 12 of 30 REJ10J 1870-0300 0.40 ± 0.05 = 0.2 0.40 x 29 = 11.6 0.40 x 29 = 11.6 3.0 - φ 1.0 5.8 5.8 0.40 13.0 (max.) 17.0 (min.) Unit: mm Dimension and tolerance Tolerance ±0.05 ±0.10 ±0.15 ±0.20 ±0.30 Dimension Up to 1.2 1.3 to 2.0 2.1 to 5.0 5.1 to 10.0 10.1 or above Figure 6 Re[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 13 of 30 REJ10J 1870-0300 2.5 Dimensions of t he Evaluation-Chip Boar d and the Use r System Interface Board The dimensions of the evaluati on-chip board and the user s yst em interface board are shown in figure 7. Unit: mm Tolerance: ± 0.5 mm 140.0 Evaluation-chip board User system i[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 14 of 30 REJ10J 1870-0300 2.6 Dimension s after Connectin g the User System Interface B oard The dimensions of the ass embly after the user system interface board has been connected to the user syst em are shown in figure 8. Unit: mm Tolerance: ±1.0 mm 32.9 13.3 54.9 User system Evalu[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 15 of 30 REJ10J 1870-0300 2.7 Using the Emulator withou t Connecti ng User System W ARNING Always switch OFF the user syst em and the emulator product before the USER SYSTEM INTERFACE BOARD is connected to or removed from any part . Before connecting, make sure that pin 1 on bot h side[...]

Secti on 2 Connection Proc edures Rev. 3.00 S ep. 08, 2008 Page 16 of 30 REJ10J 1870-0300 1 3 SW1 USER OFF USER ON Figure 9 SW1 Jumper Socket Spacer (2.6MQ x 13 mm) Figure 10 Attaching Spacers[...]

Secti on 3 Instal ling the MCU on t he User Sys tem Rev. 3.00 S ep. 08, 2008 Page 17 of 30 REJ10J 1870-0300 Section 3 Installing the MCU on the User Sys tem CAUTION 1. Check the locat ion of pin 1 before inserting th e MCU. 2. Use a screwdriver whose head matches the screw head. 3. The tightening torque must be 0.054 N•m or less. If the applied t[...]

Secti on 3 Instal ling the MCU on t he User Sys tem Rev. 3.00 S ep. 08, 2008 Page 18 of 30 REJ10J 1870-0300 MCU Pin 1 IC socket (NQPACK120SE-ND manufactured by Tokyo Eletech Corporation) User system Screws (M2.0 x 6 mm) Socket cover (HQPACK120SE manufactured by Tokyo Eletech Corporation) Figure 11 Insta lling the MCU on the User System[...]

Secti on 4 User Sys tem Int erface Circ uits Rev. 3.00 S ep. 08, 2008 Page 19 of 30 REJ10J 1870-0300 Section 4 User System Interface Circuits The following user system interface circuits are required to use the emulator with the user syst em interface board. MCU User system Sub-MCU SN74CB3Q3306A PJ2, PJ3 PK2-PK7 PO16-PO23 PO24-PO31 PD0-PD7 PE0-PE7 [...]

Secti on 4 User Sys tem Int erface Circ uits Rev. 3.00 S ep. 08, 2008 Page 20 of 30 REJ10J 1870-0300 MCU User system Sub-MCU P30 P31 P34 P35 P36 P37 P20 P21 47 k Ω Vcc P30 P31 P34 P35 P36 P37 P20 P21 TIOCA0 TIOCB0 TIOCA1 TIOCB1 TIOCA2 TIOCB2 TIOCA3 TIOCB3 Figure 13 User System Interface Circuit (2)[...]

Secti on 4 User Sys tem Int erface Circ uits Rev. 3.00 S ep. 08, 2008 Page 21 of 30 REJ10J 1870-0300 47 k Ω Vcc PF7 MCU User system SN74CB3Q3306A PF7 CS5#-D CS4#-C/CS5#-C/ CS6#-C/CS7#-C PF5 SN74CB3Q3306A PF6 PF6 PF5 CS6#-D Sub-MCU SCK5 RxD5 TxD5 SW4 3 1 SW3 3 1 SW2 3 1 Figure 14 User System Interface Circuit (3)[...]

Secti on 4 User Sys tem Int erface Circ uits Rev. 3.00 S ep. 08, 2008 Page 22 of 30 REJ10J 1870-0300 47 k Ω Vcc MCU SN74CB3Q3306A P65 SN74CB3Q3306A P64 P63 SCK6 RxD6 TxD6 Sub-MCU P65 P64 P63 User system Figure 15 User System Interface Circuit (4)[...]

Secti on 4 User Sys tem Int erface Circ uits Rev. 3.00 S ep. 08, 2008 Page 23 of 30 REJ10J 1870-0300 47 k Ω Vcc MCU EPM3256A TC ADTRGH0 P13 P13 Sub-MCU User system Figure 16 User System Interface Circuit (5)[...]

Secti on 4 User Sys tem Int erface Circ uits Rev. 3.00 S ep. 08, 2008 Page 24 of 30 REJ10J 1870-0300[...]

Secti on 5 Verifyi ng Operation Rev. 3.00 S ep. 08, 2008 Page 25 of 30 REJ10J 1870-0300 Section 5 Verifying Operation 1. Turn on the emulator according to the pr ocedures described in the H8SX/1650 E6000H Emulator User's Manual (HS1650EPH 60HE). 2. Verify the user system interface cable c onnections by checking the pin s tates with the EXMONIT[...]

Secti on 5 Verifyi ng Operation Rev. 3.00 S ep. 08, 2008 Page 26 of 30 REJ10J 1870-0300 ⎯ To use the crysta l resonator mounted on the eval uation-chip board Install the cry stal resonator in to the crystal reson ator termin als on the evaluatio n-chip board. Evaluation-chip board Crystal resonator terminals Crystal resonator Enlar g ed view X1 X[...]

Secti on 6 Points for Caution Rev. 3.00 S ep. 08, 2008 Page 27 of 30 REJ10J 1870-0300 Section 6 Points for Caution 1. Before connecting any parts or cabl es, make sure that the pins at t he pin 1 posit ion on both sides are correctly aligned. 2. Do not apply excessive force to the user sy st em interface board while it is connected to the user sy s[...]

Secti on 6 Points for Caution Rev. 3.00 S ep. 08, 2008 Page 28 of 30 REJ10J 1870-0300[...]

Secti on 7 Restric tions Rev. 3.00 S ep. 08, 2008 Page 29 of 30 REJ10J 1870-0300 Section 7 Restrictions 1. Deep-software standby mode This emulator does not support deep-s oftware standby mode. Note that the emulator switches to the software st andby mode ev en if the register setting to select the deep-s oftware standby mode is made. 2. Sleep-inst[...]

Secti on 7 Restric tions Rev. 3.00 S ep. 08, 2008 Page 30 of 30 REJ10J 1870-0300 PF7 MCU User system PF7 CS5#-D CS4#-C/CS5#-C/ CS6#-C/CS7#-C PF5 PF6 PF6 PF5 CS6#-D SW4 3 2 1 SW3 3 2 1 SW2 3 2 1 Figure 20 Switches for CS Selection 8. A/D converter In the emulator, the evaluation ch ip and the slave chip are used to implement fun ctions of Unit 0 and[...]

H8SX/1638 Group E6000H PLQP0120LA-A User System Interface Board HS1638ECN61H User's Manual Publication Date: Rev.3.00, September 8, 2008 Published by: Sales Strategic Planning Div. Renesas Technology Corp. Edited by: Customer Suppor t Depar tment Global Strategic Communication Div . Renesas Solutions Cor p . © 2008. Renesas Technology Corp., [...]

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan http://www.renesas.com Refer to " http://www.renesas.com/en/network " for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) [...]

[...]

H8SX/1638 Gr oup E6000H PLQP0120LA-A User System Interface Board HS1638ECN6 1H User’s Manual[...]