REVO REHVD0309-1 инструкция обслуживания

INSTRUCTION MANUAL REHVD0309-1 REVO ELITE HD V P D O M E NETWORK CAMERA www .hitron.co.kr Please read this manua l thoroughly before use, and keep it handy for future reference.[...]

WA R N I N G TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT T O RAIN OR MOISTURE. DO NOT INSE RT ANY ME T ALLIC OBJECT THROUGH THE VENTILA TION GRILLS OR OTHER OPENIN GS ON THE EQUIPMENT . CAUTION EXPLANATION OF GR APHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to ale[...]

FCC COMPLIANCE ST A TEMENT INFORMA TION TO THE USER : THIS EQUIPMENT HAS BEEN TESTED AND FOUND T O COMPL Y WITH THE LIMITS FOR A CLASS A DIGIT AL DEVICE, PURSUANT TO P ART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROV IDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPER A TED IN A COMMERCIAL ENVIRONMENT . THIS [...]

IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Inst a ll in accordance with the manufacturer’s instructions. 8. Do not inst all near any heat so[...]

Contents 1. Description ------------------------------------------------------------------6 1.1 Comp onents - ------------------------------------------------------------------------------------------ 6 1.2 K ey Fe atur es - ------------------------------------------------------------------------------------------ 7 2. Installation ----------------[...]

1. Description This manual applies to the REHVD0309-1 network ca mera. The network Camer a provides a network service fo r a progressive-sc an image sensor that can be monit ored on a rea l-time scre en regardl ess of dis t ance or location. By using its dedicated prog ram, many users ar e able to access the Network Camer a at once, or a single use[...]

1.2 Key Features • Brilliant video quality The Network Camera of fers the highly eff icien t H.264 video compression, which dr astically reduces bandwidth and stor age requirements with out compromising image quality . Motion JPEG is also supported f or increased flexibility . • Dual or Triple streams The Network Camer a can deliver dual or tri[...]

2. Installation For the oper ation of the Network Camera, it is n ecessary to connect a network cable for data transmi ssion, power connection f rom supplied power adapter . Depe nding on operation method s, it is possible to connect an additional alarm c able. For its f ixation on dif ferent loc ations, please consult with an installer . 2.1 Over [...]

Base Installation 1. Make mounting holes and cable hole in the place (c eiling) to which this dome camera i s installed using the supplied template sheet. Warning : The total mass of the main unit is appr ox 1.3kg. Check whether the ceiling to which the Dome Camer a is installed is strong enough to hold the unit mass . If not, the Dome Camera could[...]

• Cable through the electrical bo x with the dome base The housing can also be mounted on a 4s or 2s electrical b ox. • Using the conduit knockout punched with the dome base Remove the conduit knock out punched for the cable entry . Heater Kit Installation 1. Place the heater element is slot “ A ” . Please en sure that the cables are f acin[...]

Micro SD memory slot and Switches on the Board • Micro SD Slot Card Slot for Micro SD memory: Sock et “D” • Switches on the board SW1: F actory Default switch SW2: Video Output(BNC) On/Off switch 2.2 Connection • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network camer a. Generally a cross-over cable[...]

2. Start SmartManager utility (Start>All Prog r ams>SmartManager>SmartManager), the main window will be displayed, after a short while an y network devices connected to the network will be displayed in the list. 3. Select the camer a on the list and click right button of the mouse. Y ou can see the pop-up menu below . 4 . Select Assign IP [...]

3. Operation The Network Camer a can be used with Windows oper ating system and browser s. The recommended browsers are Internet Explorer, S afari, Fire fox, Opera and Google Chrome for Windows. Note: T o view streaming video in Microsoft Internet Explor er , set your browser to allow ActiveX controls. 3.1 Access from a browser 1. Start a br owser [...]

3.2. Access from the internet Once connected the Network Camera on your loca l network (LAN) will be accessible via internet. To access the network c amer a from the Internet yo u must configure your broadband router to allow incoming data traffic to the network camer a. To do this, enable the NAT-tr aversal feature, which will attempt to automatic[...]

1) General controls L i v e V i e w P a g e S e a r c h & P l a y b a c k P a g e S e t u p P a g e H e l p P a g e The video drop-down list allows you to select a customiz ed or pre-progr ammed video stream on the liv e view page. Stream pr of iles are conf igured under Setup > Basic Conf iguration > Video & Image. F or more informat[...]

3.5 Network Camera Setup This section describe s how to conf igure the network camer a, and is intended for pr oduct Administrators, who h ave unrestrict ed access to all the Setup tools; and Oper ators, who have acce ss to the setting s for Basic, Liv e View , Video & Image, Audio , Event, an d System Conf iguration . Y ou can conf igure the n[...]

1) Users User access control is enabled by def ault. An admi nistrator can set up other users, by giving these user names and password s. It is also possible to allow anonymou s viewer login, which means that anybody may access the Liv e View page, as described below: The user list display s the authorized users and u ser groups (level s): User Gro[...]

• Obtain IP address via DHCP - Dynamic Host Configuration Pro tocol (DHCP) is a protocol that lets network administrator s centrally manage and autom ate the assignment of IP addresses on a network. DHCP is enabled by default. Although a DHCP server is mostly used to set an IP address dynamically, it is also p ossible to use it to set a static, k[...]

3) Video & Image • Stream1 Setting - Codec: The codec settings are separated into MPEG4 and H.2 64. H.264 is a lso known as MPEG-4 Part 10. This is the ne w generation compression standard f or digital video. This function offers higher video resolution th an Motion JPEG or MPEG-4 at the same bit rate and bandwidth, or the same quality video [...]

* MPEG4 ASP(Advanced Simple Profile): Its notable technical featur es relative to the Si mple Prof ile, which is roughly similar to H.263, including "MPEG"-style quantization , interlaced video, B pictures (also known as B Fr ames), Quarter Pixel motion c ompensation (Qpel), Global motion c ompensation (GMC). - Resolution: It enables user[...]

- JPEG frame rate: Same as the Stream1 Setti ng. - JPEG quality: Select the picture quality . If users want to have a high quality of f ast image one by one, please decrease the v alue. For the purpose of gener al monitoring, please do not change a basic v alue. Such act may cause a problem to the system perf ormance. • Stream3 Setting Same as th[...]

- Sample rate: Select the required Sample rate (number of times p er second the sound is sampled). Th e higher the sample rate, th e better the audio quality and the gr eater the bandwidth required. - Sound bitrate: Depending on the selected encoding, set the de sir ed audio quality (bitr ate). The settings affect the av ailable bandwidth and the r[...]

5) Date & Time • Current Server Time It displays the current date and time (24h clock) . The time can be displayed in 12h clock format in the overlay (see below). • New Server Time Select your time zone from the drop-down list. If you want the ser ver clock to automatically adjust for daylight savings time, select the “Automatically adjus[...]

3.5.2 V ideo & Image  Basic R efer to “3.5.1 Basic Con f iguration > Video & Image” for more details. 24[...]

 Appearance • Image Appearance This page provides access to the adv anced image settings for the network camer a. - Brightness: The image brightness can be adjusted in the range 1-10, where a higher value produces a brighter image. - Color level: Select an appropriate level by entering a value in the range 1-10. Lower values mean less contrast[...]

 AE & AWB This page provides access to set the exposure and white balance of the network camera. • Exposure Control Configure the exposure settings to suit the im age quality requirements in relation to lighting consideration. - Mode: Supports exposure modes to control the am ount of light d etected by the camera sensor based on settings f[...]

• White Balance Control This adjusts the r elative amount of red , green and blue primary colors in the image so that the neutral colors are reproduc ed correctly . The camer a can be set to automatically adjust for the type of light and compensate for its color . Alte rnatively , the type of light source can be set manually . From the dr op-down[...]

 Privacy Masking - Basic The privacy masking function allows yo u to mask pa rts of the video image to be transmi tted. You can set up to eight privacy masks and the color of privacy mask s is black. The priv acy masks are c onf igured by Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize or delet[...]

 Webcasting The network camera can stream live video to a we bsite. Copies the HTML code generated on the screen and paste it in page code of th e website you want to display live video. Note: To use webcasting service, the Enable Anonymous viewer login option mu st be checked. Refer to “3.5.1 Basic Configuration > Users” for more detail [...]

3.5.3 Audio R efer to “3.5.1 Basic Con f iguration > Audio” for mor e details. 30[...]

3.5.4 Event 1) Event-In  On Boot This i s used to trigger the event ev ery time the Network Camer a is started. Select “Enabl e” to activate the motion event. 31[...]

 Alarm In Select “Enabl e” to activate the alarm event. The network camera supports 1 alarm input port. - Type: Choose the type of alarm you wish to use from the drop-down list. - Dwell Time: Set the dwell time of an event lasts f o r t he specif ied dwell time from the point of detection of an alarm input. 32[...]

 Manual Trigger This option makes use of t he manual trigger button pr ovided on the live view page, which is used to start or stop the ev ent type manually . Alternatively the event can be trigger ed via the product's API (Application Progr amming Interface). 33[...]

 Motion Moti on detection is used to generate an alarm wh enever movemen t occurs (or stops) in the video image. A total of 8 Motion and/or Mask windows can be cr eated and conf igured. Motion is detected in def ined Motion windows, which are placed in the video image to target specif ic areas. Mov ement in the areas outside the motion wi ndows [...]

• Motion Detection Setting The behavior f or each window is def ined by adjusting the Threshold and Sensitivity , as described below . A motion index is a set of par ameters describing Window Name, T ype, Threshold, Sensitivit y , and Dwell Time. Window T ypes is one of Motion and Mask windows. - Threshold: Sets up the threshold f o r the motion [...]

2) Event-Out  SMTP(E-Mail) The Net work Camera c an be conf igured to send event and error email message s via SMTP (Simple Mail T ran sfer Protoc ol). • SMTP(E-Mail) Setting Select “Enable” to activate the SMTP oper ation. - Mail Server/Port: Enter the host names (or IP addresses) and port numbers f or your mail server in the f ields prov[...]

- Login Method: Set the Weakest method allowed to the highest/safest meth od supported by the mail server. The most secure method is listed in the drop-down list: L o g i n / P l a i n • SMTP(E-Mail) Receiver - Receiver: Enter an email address. Y ou can also regi ster th e e-mail address of r ecipients up to 8. • SMTP(E-Mail) Test - Receiver: E[...]

- Remote directory: Specify the path to the directory where the uploaded imag es will be stored. If this directory does not already exist on the FTP server , there will be an error message when uploading. - User name/Password: Provide your log-in information. • JPEG Setting - Pre-event: A pre-event buf fer contains images f rom the time immediate[...]

• HTTP Server Setting - Name: The name of the HTTP event server. Use a de scriptive name. - URL: The network address to the server and th e script that will handle the request. For example: http://192.168.12.244/cgi-bin/upload.cgi - User name/Password: Provide your log-in information. • HTTP Server Test When the setup is complete, the connectio[...]

▼ Audio Alert When th e network camer a detects an ev ent, it can ou tput a predef ined audio data f ile to an external speaker . Check the box to enable the service. • Audio Alert Setting To use the audio alert wi th the Network camera, an audio data file made by user must be uploaded from your PC. Provide the path to the f ile directly , or u[...]

Audio Recorder T o use the Audio Recor der tool to make an audio f ile for Au dio Alert function, y ou must install the Revo Remote Pro HD progr am on the installation CD at f irst. T o run the Audio Recor der program go to (Start>All Pr ograms> Revo Remote Pr o HD >Tools>ARecorder) in your PC, the ARec or der window will be displayed a[...]

When th e network camer a detects an ev ent, it can re cord the video st ream to t he Micro S D card (not supplied) or NAS (Network Attached Device) as a st or age device. Check the bo x to enable the service. • Record Setting - Overwrite: Click checkbox to overwrite the storage device. - Stream Type: You can select Stream1, Stream2, or Stream3. [...]

Note2: Network File System (NFS) is a network file system protocol, all owing a user on a client computer to access files over a network in a manner similar to how local storage is accessed. NF S, like many other protocols, builds on the Open Network Computing Remote Procedure Cal l (ONC RPC) system. * Address: Enter IP address f or NAS device. * R[...]

3) Event Map The e vent map allows y ou to change the set tings and establish a schedule f or each event trigger from the Network Camer a. Y ou can register t he event map up to max. 1 5. Click Add button to make a new ev ent map and the f ollowing popup window will be displayed. 44[...]

• General Enter the name for a new event map . • Event In Select an event type in the drop down list. • Event Out - E-mail: Select email addresses you want to send via email that an event has oc curred. - FTP: Select checkbox beside FTP to record and sav es images to an FTP server when an event has occurred. - HTTP Server: Sends notif ication[...]

2) Security  Users User acce ss control is enabled by def ault, when the administrator sets the r oot password on f irst access. New users ar e authorized with user names an d passwor ds, or the administr ator can choose to allow anonymous viewer login to the Li ve View page, as described below: • User Setting Check the box to en able anonymou[...]

 HTTPS For greater security, th e Network Camera can be configured to use HT TPS (Hypertext Transfer Protocol over SSL (Secure Socket L ayer)). That is, all communication that would otherwise go via HTTP will instead go via an encrypted HTTPS connection. • HTTPS Connection Policy Choose the form of connection you wi sh to use from the drop-dow[...]

 IP Filtering Checking the Enab le IP address filtering box enables the IP address filtering function . Up to 256 IP address entries may be specified (a sin gle entry can contain multiple IP addresses). Click th e Add button to add new filtered addresses. When the IP address filter is enabled, addr esses added to the list are set as allowed or d[...]

3) Date & Time • Current Server Time It displays the current date and time (24h clock) . The time can be displayed in 12h clock format in the overlay (see below). • New Server Time Select your time zone from the drop-down list. If you want the ser ver clock to automatically adjust for daylight savings time, select “Automat ically adjust f[...]

4) Network Network setting par ameters can be set here. Settings for IP , DNS, Host Name, Port, and ARP /Ping can be established, along with setting f or DDN S, UPnP , QoS, Z eroconf ig, and Bonjour . 50[...]

 Basic • IP Address Configuration: - Obtain IP address via DHCP: Dynamic Host Config uration Protocol (DHCP) is a protocol that lets network administrators centrally manage an d automate the assignment of IP addresses on a network. DHCP is enable d by default. Although a DHCP serv er is mostly used to set an IP address dynamically, it is also [...]

 DDNS • Internet DDNS(Dynamic Domain Name Service) When using the high-speed I nternet with the telephone or cable network , users can operate the Network Camer a even on the floating IP envir onment in which IPs are changed at every access. Users should receive an account and pa sswor d by visiting a DDNS service like http://www .dyndns.com/ [...]

 RTP Hav e a setting for sending and r eceiving an audio or video on a real -time basis. These settings are the IP address, port number, and Ti me-To-Live value to u se for the media stream(s) in multicast H.264 format. Only certain IP addresses and port number s should be used for multicast streams. For more information, please see the online h[...]

 UPnP The Network Camera includes support for UPnP™ . UPnP™ is enabled by default, and the Network Camera then is automatically detected b y operating systems and clients th at support this pr otocol. Note: UPnP™ must be installed on your workstati o n if running Windows XP. To do this, open the Control Panel from the Start Menu and select[...]

 QoS Quality of Service (QoS) provides the m eans to guarantee a certain level of a specified resource to selected traffic on a network. Quality can be defined as a maintained level of bandwidth, low latency , and no packet losses. The main benefits of a QoS -aware network are: - The ability to prioritize traffic and thus allow crit ical flows t[...]

• Auto Traffic Control Set a limitation on user network resource s by designating the maxi mum bandwidth. - Maximum bandwidth - In case of sharing other net work progr ams or equipment, it is possible to set a limitation on the maxim u m bandwidth in the unit of Mbit/s or kbit/s. - Auto fr ame rate - Selected if not influenc ed by a network -rela[...]

• NAT traversal Settings - Enabl e - when enabled, the netw ork camera at tempt to configure port mapping in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the Network Camera (see System>Network >UPnP). * automatic setting: The Network Camera au tomatically search for NAT routers on your n e t w o r k . * [...]

 Zeroconfig Z eroconf ig allows the network camera to create and assign IP addr ess for network camer as and connect to a network automatically . Zero configur ation networking (zeroconf), is a set of techniques that automatically creates a usable Internet Protocol (IP) network without manual operator intervention or sp ecial configuration serve[...]

 Bonjour The network camera includes support for Bonj our. When enabled , the network camera is automatically detected by operating systems and clients that support this protocol. Note: Bo njour - Also known as zer o-configuratio n networking, Bonjour enables devices to automatically discover eac h other on a network, without having to enter IP [...]

6) Maintenance • Maintenance Server - Restart: The unit is restarted without changing any of the settings. Use this method if the unit is not functioning properly. - Reset: The unit is restarted and most current se ttings are rese t to factory default values. The settings that ar e not affected are: * the boot protocol (DHCP or static) * the stat[...]

• Restore Import and apply previously stor ed user-def ined settings from a u ser PC. Note: Backup and R estore can only be used on the same unit running the same f irmware. This feature is n ot intended for multi-conf igurations or f or f irmware upgrades. 7) Support The support page provides valuable informati on on troubleshooting and contact [...]

3.6 Playback The Playback window contains a list of recordin gs mad e to the memory card. It shows each recording's start time, leng th, the event type used to start the recording, calendar and time slice bar indicates if the recording is existed or not. The descripti on of playback window follows. (1) Video Screen Y ou can see the video scr e[...]

Go to the last: go to the end of the video clip . Clip copy: copy the video clip. Z oom In: zoom in the video clip Full Screen: display full scr een of the video. (3) Time Chart Display an hour-based se arch screen f o r the chosen d ate. If recorded data is pr esent, a blue section will be displayed on a 24-hour basis. (4) Speaker Control Bar Use [...]

3.7 Help The Help information window will be pr ovided as a popup window so that u sers can open and read it without a need for log-in. I t will offer a description on set tings and Help page by which user s can manipulate the Network Ca mera without a reference t o the manual. 64[...]

3.8 Resetting to the f actory default settings To reset the Network Cam era to the original factory setting s, go to the Setup>System> Main tenance web page (described in “3.5.5 System > Maintenance”) or use the Control Button on the network camera, as d escribed below: • Using the Reset Button Follow the instructions below to reset [...]

4. Appendix 4.1 Troubleshooting T roubleshooting: If problems occur , verify the insta llation of th e Network Camer a with the instructions in this manual and with other oper ating equipment. Isolate the problem to the specif ic piece of equipment in the system and ref er to the equipment manual f or further inf ormation. Problems/Symptoms Possibl[...]

4.2 Alarm Connection The following connection d iagram gives an ex ample of how to conn ect a network camera. 4.3 Preventive Maintenance Preventiv e maintenance allows detection and correcti on of minor fa ults before they become serious and cause equipment f ailure. Every three month s, perform the f ollowing maintenance steps: 1. In spect all con[...]

4.4 Product Specification Main Item Specif ication Image sensor 1/2.7” Pr ogressiv e scan RGB CMOS Active Arr ay 1920(H) x 1080(V) Lens V arifocal 3.0mm ~ 9.0mm, F1.2, DC IRIS Angle of View 3.0mm – 93 ° (H) / 9.0mm – 31. 7 ° (H) Camera Angle Adjustment Pan: 360 ° Tilt: 180 ° Rotation: 360 ° Min. illumination Color: 2.5Lux, B/W : 0.2Lux ([...]

System Requirement for Web Browser Operating S ystem: Microsoft Windows 98 , Microsof t Windows ME, Micr osoft Windows 2000, Micr osoft Windows XP , Microsoft Windows Vis ta or Microsoft Windows 7 CPU: Intel Core 2 Duo 2Ghz or higher , 1GB RAM or more, 10GB free disk or high er VGA: AGP , Video RAM 32MB or higher (1024x768, 24bpp or higher) 69[...]

REVO ELITE HD VP DOME NETWORK CAMERA[...]