Rowe CD-100K инструкция обслуживания

CD -1 00K LA SER ST A R ® ST ARGLO FIELD SERVICE MANUAL & PAR TS CA T ALOG V OL UME 1 of 2 INST ALLA TION, PR OGRAMMING, ROUTINE SERVICE Part No. 21822666 Rev. C R[...]

Rowe International, Inc. 1500 Union SE • Grand Rapids, MI 49507-1884 (616) 243-3633 Printed in USA CD -1 00K LASERST AR ® ST ARGLO FIELD SER VICE MANU AL & P AR TS CA T ALOG VOLUME 1[...]

ii 21822666 This page intentionally left blank.[...]

21822666 iii Preface To make installation easier, this manual describes a typical installation. This “typical” installation only includes loading t he title rack and discs, setting up the sound system, and in some situations, modifying the pricing. If you wish to make further programming changes, make them using the information that follows the[...]

Table of Contents iv 21822666 SECTION 1 — INSTALLATION AND SYSTEM DESCRIPTION Introduction ......................................................................................................................................................... 1 - 1 Features ........................................................................................[...]

Table of Contents 21822666 v SECTION 2 — INSTALLATION & PROGRAMMING (Continued) Procedures for Loading the Title Page Holder ................................................................................... ............. 2 - 4 Procedures for Loading Discs ......................................................................................[...]

Table of Contents vi 21822666 SECTION 2 — INSTALLATION & PROGRAMMING (Continued) Options Menu ................................................................................................................... ............................... 2-39 More Options 1 Menu .............................................................................[...]

Table of Contents 21822666 vii SECTION 3 — ROUTINE SERVICE Introduction ......................................................................................................................................................... 3 - 1 Doing an Audit .....................................................................................................[...]

viii 21822666 Figure 1-1. CD-100K Major Components Digital Display Shows the Selection Playing, Selection Being Made, Selections Remaining, the Message Center, and Service Mode Display Selector Keyboard Enters Numbers Contains the POPULAR, RESET, MY SONG FIRST, and Page Turning Keys[...]

[...]

1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with a dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions. 8) Do not install near any heat sources such as radiators, heat [...]

W ARNING Do not plug the phonograph in until you verify it is configured for the proper mains voltage. BLACK WHITE WHITE BLACK 1 2 3 4 120~ MAINS SUPPL Y VOL T AGE SELECTOR BLUE BLUE 1 2 3 4 240~ MAINS SUPPL Y VOL T AGE SELECTOR[...]

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE HAZARD, AND PERSONAL INJURY ; NO OBJECTS FILLED WITH LIQUID, SUCH AS V ASES, SHALL BE PLACED ON THE APP ARA TUS. DO NOT REMOVE ANY COVERS, GUARDS, OR SHIELDS. NO USER SERVICEABLE P AR TS ARE INSIDE THIS PHONOGRAPH. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead s[...]

INTRODUCTION The CD-100K plays compact discs exclusively . The reliable CD mechanism holds up to 100 compact discs. These discs are played through a 1000 watt stereo amplifier . Before you begin to unpack and use this phonograph, please pay special attention to the following: READ THIS CAREFULLY BEFORE PLACING YOUR NEW PHONOGRAPH INTO SERVICE: Mech[...]

CD-100K Phonograph 1-2 21822666 FEA TURES The major CD-100K features are: General Features: • All lighting done with LED’s. No fluorescent or incandescent lamps used. • LED lighting controllable by IR remote • Sturdy construction and reliable design • Conveniently located customer, operator, and service controls • Message Center Display[...]

Section 1: Installation & System Description 221822666 1-3 UNP ACKING INSTRUCTIONS This section contains information for unpacking the phonograph and installing it on location. The phonograph is shipped with all major components in place. Save all tie-down hardware in case the CD-100K must be moved to another location. Exterior 1. Remove the sh[...]

CD-100K Phonograph 1-4 21822666 Title Page Assembly in the “UP” Position Figure 1-2. Title Page Title Page Assembly 1. Remove the shipping screws from both ends of the lower title page assembly support bracket. 2. Remove the shipping band from the front of the title page assembly. 3. Check to see if the title page assembly is plugged in (see Fi[...]

Section 1: Installation & System Description 221822666 1-5 Save all shipping hardware that you remove in the following six steps: Mechanism CD UNPACKING 1. Remove the CD changer mechanism shipping bolt from the back of the phonograph cabinet (see Figure 1-3). Figure 1-3. Shipping Bolt Removal 2. Remove the shipping tape from the front ends of t[...]

CD-100K Phonograph 1-6 21822666 Do not proceed with unpacking until you read and understand the following caution: 4. Remove the rubber band on the hold-down plate. 5. Remove the rubber band, wire hook, and warning tag that hold the sprag lever out of the sprag wheel. 6. Remove all tape from the magazine belt and magazine pulley. 7. Check to see th[...]

Section 1: Installation & System Description 221822666 1-7 CD Selection System CD selections are made by entering the four-digit selection number on the selector keyboard (see Figure 1-5). NOTE: On a new phonograph, a phonograph that has had its CCC replaced, or a phonograph that has had the POPULARITY cleared, the POPULAR key will not select a[...]

CD-100K Phonograph 1-8 21822666 Autoplay When no selections have been made for a predetermined time, the Autoplay feature will play selections from a programmed list or make random selections. The choice of which selections are chosen, the selection sequence, and the selection interval can be programmed by the owner or service person. PRINCIPLES OF[...]

Section 1: Installation & System Description 221822666 1-9 Two-Wire Volume Control A Rowe innovation, the two-wire volume control simplifies complex installations and reduces cost. A special preamplifier design permits volume control wiring using any unshielded two-wire cable. OUTPUT TRANSFORMERS The output transformers (Figure 1-7) “step up?[...]

CD-100K Phonograph 1-10 21822666 CD Changer Mechanism The CD changer mechanism, also referred to as the “mechanism” or “mech”, is located in the center of the cabinet’s interior. It is the primary mechanical component of the phonograph. The mechanism holds 100 CD’s and plays selections on command from the selection system. (Refer to Fig[...]

Section 1: Installation & System Description 221822666 1-11 CAM SWITCH AND MOTOR ASSEMBLY The cam switch and motor assembly (see Figure 1-9) consists of the transfer motor, cam, and two cam switches. SPRAG ASSEMBLY This assembly locks the CD magazine in position. CD MODULES The CD player plays the CD’s after they are positioned on the turntab[...]

CD-100K Phonograph 1-12 21822666 Mechanism Control Unit This solid-state switching unit controls the scan and transfer. Main Power Supply The main power supply (Figure 1-10) distributes unregulated +24 VDC, +12 VDC, and regulated +9 VDC to the phonograph. The mains voltage (120 VAC or 240 VAC) to the main power supply is controlled by the power swi[...]

Section 2: Installation & Programming 21822666 2-1 Section 2: Inst allation & Programming INTRODUCTION This section describes the installation and programming process. This information begins with a summary of what happens when the phonograph is powered up and continues with detailed instructions on how to load the titles and discs, modify [...]

CD-100K Phonograph 2-2 21822666 The following steps are a summary of the detailed Power On Process that is described in Section 5 of Volume 2. Step 1. Power switch on rear of phonograph is turned on, main power supply +9 VDC, +12 VDC, and +24 VDC LED’s light, and all modules and components receive power. The 120~ relay closes, supplying 120~ to t[...]

Section 2: Installation & Programming 21822666 2-3 Loading the Title Holder All of the titles on the title strip sheet can be used for either right- or left-hand titles. If your title strips have not been preprinted, you may want to type the titles before you tear the individual title strips off the title strip sheet. Refer to the sample in Fig[...]

CD-100K Phonograph 2-4 21822666 PROCEDURES FOR LOADING THE TITLE P AGE HOLDER 1. Tear each title strip from the title sheet so the perforated column appears on the side of the title strip. (The shaded portion of the title strip in Figure 2-1 represents a title strip that has been removed from the title sheet). 2. Fold the title strip along the perf[...]

Section 2: Installation & Programming 21822666 2-5 PROCEDURES FOR LOADING DISCS Load discs as follows: 1. Unlock and open the top door. 2. Pull the SERVICE button out to the SERVICE position (refer to Figure 2-4) . The SERVICE switch is located in the upper right-hand corner of the cabinet. 3. Press the CANCEL/SCAN button (located on the CD cha[...]

CD-100K Phonograph 2-6 21822666 5. Check title strips and disc sequence to ensure that the titles and discs correspond. 6. After all titles and discs are in the proper places, perform a disc initialization. Initialization is performed in the following manner: NOTE: When loading discs, be sure to keep the magazine disc load approximately balanced. I[...]

Section 2: Installation & Programming 21822666 2-7 SETTING TITLE P AGE LIMITS FOR THE FIRST TIME This procedure gives you specific instructions on how to set the page limits only. The phonograph is shipped with all pages accessible. Pages 1 through 9 can be “flipped” and viewed. When you install discs, you may not need all 9 pages. If you d[...]

CD-100K Phonograph 2-8 21822666 To Set Disc Prices: The Handy Case has a Price Card (see Figure 2-6A) that may be substituted for the Standard Price Card. The Handy Case also contains a Price Sheet with printed prices (see Figure 2-6B) which can be peeled off and placed at the appropriate location on the Price Card. Using the phonograph keyboard, t[...]

Section 2: Installation & Programming 21822666 2-9 Use the prices in the example that follows to help yourself better understand the phonograph’s pricing. Example CD Prices 4 for $1.00 9 for $2.00 25 for $5.00 NOTE: This example will not give the correct dollar amounts for U.S. money unless PRICING OPTION 3 is set to 5. (This is the factory s[...]

CD-100K Phonograph 2-10 21822666 11. Move down to the next play option (LEVEL 2 PLAYS) by pressing and holding RESET and then pressing 1 (enter 009 and press POPULAR). 12. Move down to the next play option (LEVEL 3 PLAYS) by pressing and holding RESET and then pressing 1 (enter 025 and press POPULAR). 13. Move down to the next play option (LEVEL 4 [...]

Section 2: Installation & Programming 21822666 2-11 70-Volt Speakers To avoid prohibitive cable losses on long speaker lines (over 100 feet), use 70 V speakers. The power level in the 70 V speakers is set at each speaker. 250 watts of the 1000 watts is provided for 70 V speakers by A1, A2 connections on the audio output transformer assembly. NO[...]

CD-100K Phonograph 2-12 21822666 Table 2-1 Extension Speaker Worksheet Sheet 1 SELECTING SPEAKER POWER General Instructions This section will lead you through the power and speaker selection process. This process consists of four major steps and several smaller steps. The major steps are: 1. Identifying the extension speakers and computing the exte[...]

Section 2: Installation & Programming 21822666 2-13 Table 2-1. Extension Speaker Worksheet Sheet 2 4-OHM SPEAKERS CONNECTED TO TRANSFORMER TAPS Place the quantity of speakers in the blank under QTY and multiply the quantity times the power consumption (show stereo speakers as 2 speakers). Place your results in the blank under TOTAL. 4-Ohm Stere[...]

CD-100K Phonograph 2-14 21822666 Table 2-1. Extension Speaker Worksheet Sheet 3 8-OHM SPEAKERS CONNECTED TO TRANSFORMER TAPS Place the quantity of speakers in the blank under QTY and multiply the quantity times the power consumption (show stereo speakers as 2 speakers). Place your results in the blank under TOTAL. 8-Ohm Stereo Speakers connected to[...]

Section 2: Installation & Programming 21822666 2-15 Table 2-1. Extension Speaker Worksheet Sheet 4 Combine consumptions of all speakers: Stereo Mono Connected to E1 - E7 ______ ______ Tapped 4-Ohm: ______ ______ Tapped 8-Ohm ______ ______ 70-Volt A1, A2 ______ ______ 70-Volt E7 to E7 ______ Stereo Mono Grand Total Totals: __________ +__________[...]

CD-100K Phonograph 2-16 21822666 Table 2-1 Extension Speaker Worksheet Sheet 4 (Continued) 3. The phonograph wires to change are the Violet (channel 1) and the Pink (channel 2) on the output transformer assembly (see Table 3-2A) . Use Table 3-2A as a guide to select the power used by the phonograph. This power should roughly match the amount indica[...]

Section 2: Installation & Programming 21822666 2-17 This page intentionally left blank.[...]

CD-100K Phonograph 2-18 21822666 CHANNEL 2 E1 E2 E3 E4 E5 E6 E7 E7 E6 E5 E4 E3 E2 E1 CHANNEL 1 70V MONO 70V 70V A1 A2 A1 A2 PINK VIOLET BLACK W/G W/O KEY O/B W/BL W/R O/B 1 2 3 4 5 6 7 P2 1 8 4 2 3 5 6 7 KEY GREEN BLACK SLATE P1 PHONO SPEAKER CROSSOVER WOOFER WOOFER RT LT + - + - AUDIO OUTPUT TRANSFORMER ASSEMBLY 500 WATTS PER CH 500 WATTS PER CH J[...]

Section 2: Installation & Programming 21822666 2-19 CHANNEL 2 4 OHM SPEAKER (4 WA TTS) CHANNEL 2 8 OHM SPEAKER (8 WA TTS) + - + - + - + - + - + - + - + - + - CHANNEL 2 70 V SPEAKER (24 WA TTS) CHANNEL 1 70 V SPEAKER (24 WA TTS) MONAURAL 70 V SPEAKER (24 WA TTS) MONAURAL 4 OHM SPEAKER (4 WA TTS) MONAURAL 8 OHM SPEAKER (8 WA TTS) CHANNEL 1 4 OHM [...]

CD-100K Phonograph 2-20 21822666 2 1 E1 E6 E7 E5 E4 E3 E2 B BR Y G BR/W G/W BL/W E7 E2 E1 E3 E4 E5 E6 Y BL/W B G/W BR/W G BR A1 A2 A1 A2 B/W B/W S S 2 1 BR B/W B G CHANNEL 1 OR 3 CHANNEL 2 OR 4 40832108 TRANSFORMER WIRING DIAGRAM[...]

Section 2: Installation & Programming 21822666 2-21 This page intentionally left blank.[...]

CD-100K Phonograph 2-22 21822666 SPEAKER SYNOPSIS 1000 WATTS OF RMS POWER PER AMPLIFIER OR 500 WATTS PER CHANNEL. The generic speaker wiring diagrams cover 4 to 32 speakers. Diagram 1 has a 4 speaker layout. If you only want the four speaker layout, then the maximum output of each speaker would have to be rated 4 ohms and capable of 300 watts. Ques[...]

Section 2: Installation & Programming 21822666 2-23 1000 watts Amplifier E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel F our 4 ohm speak ers each rated at a minimum of 300 watts each. (Note: Left channel is out of phase , plus + and minus -, in hookup with respect to right channel)  EA CH SPEAKER OUTPUT IS 250 W [...]

CD-100K Phonograph 2-24 21822666 1000 watts Amplifier E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel Series/P arall Hookup Sixteen 4 ohm speakers each r ated at a minimum of 75 w atts each (Note: Left channel is out of phase, plus + and min us -, in hookup with respect to right channel). EA CH SPEAKER OUTPUT IS 62.5 W A TTS DI[...]

Section 2: Installation & Programming 21822666 2-25 1000 watts Amplifier E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel Series/P arall Hookup Thir ty two 8 ohm speak ers each rated at a minimum of 50 w atts each (Note: Left channel is out of phase, plus + and min us -, in hookup with respect to right channel). EA CH SPEAKE[...]

CD-100K Phonograph 2-26 21822666 1000 watts Second Amplifier Exter nal Only E1 E7 E1 E7 Speakers Left Channel Speakers Right Channel 1000 watts Amplifier E1 E6 Speakers Left Channel Speakers Right Channel Violet Black E6 Pink Pink and Violet connect to E6 as shown Black connects to E1 Juk ebo x Inter nal Speakers[...]

Section 2: Installation & Programming 21822666 2-27 This page intentionally left blank.[...]

CD-100K Phonograph 2-28 21822666 Figure 2-8A. Remote Volume Control Diagrams Dual Remote Volume & Cancel Control 30632209 Dual Remote Volume & Cancel Contro 30632201[...]

Section 2: Installation & Programming 21822666 2-29 IR VOLUME CONTROL 2CH PREAMP Volume can be controlled by a 21958307 IR transmitter and a single- or dual-wired remote control. When the wired volume control is moved, the volume will quickly fade up or down to match its position. When moving a wired remote control, it is best to quickly turn t[...]

CD-100K Phonograph 2-30 21822666 IMPORT ANT : + Before setting these controls, do Steps 1-5 in Table 2-2B to ensure that the amplifier is not overloaded. + Each of these controls can limit the maximum volume for its range by as much as 85%. + This means that if a control is set to minimum, that the maximum power available for that range is only abo[...]

Section 2: Installation & Programming 21822666 2-31 If the Room or Speaker System Requires a Trade-Off The equalizer limits the volume of all of the audio frequencies. Therefore, to achieve the best sound for a specific room or set of speakers, you may find that most of the graphic equalizer controls need to be turned down. In this situation, t[...]

CD-100K Phonograph 2-32 21822666 Average or Moderately Absorbent Rooms These are the factory settings. 1 . Turn all seven right channel and seven left channel graphic equalizer controls fully counterclockwise. 2. The graphic equalizer’s controls should now be set as shown to the right. 3 . Play a selection and turn the controls slightly (no more [...]

Section 2: Installation & Programming 21822666 2-33 Paging Paging circuitry is part of the Preamplifier. The Microphone cable plugs directly into the preamplifier. CHANGING THE NUMBER OF CREDITS REMAINING Use these steps to increase or decrease the number of CREDITS REMAINING on the phonograph. 1. Enter the SERVICE mode by pulling the SERVICE b[...]

CD-100K Phonograph 2-34 21822666 If You “Get Lost” in the Menus Since the menu mode of pricing and programming does not require you to use any reference material, you may (occasionally) find that you have ventured down the wrong menu and that you don’t know what option is next. To correct this situation, perform the following steps: 1. Press [...]

Section 2: Installation & Programming 21822666 2-35 This page intentionally left blank.[...]

CD-100K Phonograph 2-36 21822666 *SECURITY* ENTER CODE ---- SECURITY LEVEL - LVL 2 CODE ---- LVL 3 CODE ---- PHONO ID ---- VOID SRVC SW --- SECURITY IS --- MODEM ----------> 0 1 2 3 4 5 6 7 8 9 0- *MODEM* MODEM PW ------ ANSWER ON --:-- ANSWER OFF --:-- # OF RINGS - MODEM RECV --- CONNECT DELAY MODEM XMT INIT MODEM RCV INIT RESTORE FACT INIT MOD[...]

Section 2: Installation & Programming 21822666 2-37 NOTE: Shaded menu items are used only with the 4-channel AV Control and the Volume Control Unit (Studio Sound Package.) *MORE OPTIONS 2* TIM LOCK -- ---- LOCK SCH SMTWTFS FREE ALBUM --- THANK YOU --- POPULAR KEY --- PREMIUM RATIO -- AUTOLOD DFLT --- RAM TEST CODE - SEL ---- --:-- PAIRS SEL ---[...]

CD-100K Phonograph 2-38 21822666 Service Mode Menu The SERVICE MODE menu (referred to as the “MAIN menu”) is the starting point for all service, pricing, and programming functions. This menu contains the general title for each submenu. Some of the submenus contain commands only. Other submenus contain both commands and further submenu names. Re[...]

Section 2: Installation & Programming 21822666 2-39 To enter this menu from the MAIN menu: Type 3. Autoplay Autoplay is the function that plays CD’s when no customers have made selections. Autoplay can be used to stimulate play or provide background music. This feature can be scheduled and customized from the Autoplay menu. To enter this menu[...]

CD-100K Phonograph 2-40 21822666 More Options 1 Menu This menu is a collection of options that allows you to: • Select FIFO or random playback of selections • Automatically lockout defective discs (Lockout Count) • Cancel Autoplay when a paid selection is made • Use certain discs for Autoplay only (locked out from the keyboard) • Automati[...]

Section 2: Installation & Programming 21822666 2-41 HOW TO MAKE PROGRAMMING CHANGES The CD-100K allows you to perform programming activities in two ways. The primary or MENU mode uses menus to move through the choices until you find the desired function. This method of selecting the function you want is more time consuming than the Command mode[...]

CD-100K Phonograph 2-42 21822666 Security Levels The CD-100K uses security levels to protect audit and programmable information. • Level 1 allows you to view all of the phonograph information, except the security codes, but does not allow you to change any of the information. • Level 2 allows you to review all of the information, except the sec[...]

Section 2: Installation & Programming 21822666 2-43 Table 2-5A. Menu & Command Descriptions Code Description * SERVICE MODE * - Is the title of the MAIN menu. This menu is the beginning menu for all the other menus. All of the options in this menu are names for other menus. The table that follows contains descriptions of all of the menu opt[...]

CD-100K Phonograph 2-44 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 06 Security On/Off - If set to OFF, Security Level 3 is automatically established when entering the SERVICE MODE. When security is set to ON, Level 1 is established when SERVICE MODE is entered and the proper four-digit security code must be ente[...]

Section 2: Installation & Programming 21822666 2-45 Table 2-5A. Menu & Command Descriptions Continued Code Description 08 9 MODEM SPECIAL - Modem Special is a continuation of the MODEM menu. 0890 Modem Post Reports to a PC - If set to ON, the modem will call the office and send reports on the days that are active in menu item 0891. If set t[...]

CD-100K Phonograph 2-46 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 1 AUDITS - Are the functions and menus that allow you to display and reset the various accumulated figures for money, popularity, number of plays, and credits. 10 CASH AUDITS - Is the menu that allows you to display, but not change, cash totals, [...]

Section 2: Installation & Programming[...]

CD-100K Phonograph 2-48 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 1041 Current Number of Type 2 Coins - Displays the total number of Type 2 coins (10¢) collected since the last time the CLEAR CASH command (Selection 4 in the AUDITS menu) was used. 1042 Current Number of Type 3 Coins - Displays the total number[...]

Section 2: Installation & Programming 21822666 2-49 Table 2-5A. Menu & Command Descriptions Continued Code Description 1 17 Overplay Counter - Displays the number of overplays selected since the last time the CLEAR PLAYS command (Selection 5 in the AUDITS menu) was used. The overplay counter is part of the CCC’s memory, which keeps track [...]

CD-100K Phonograph 2-50 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 21 Page Mode - Displays and toggles the automatic page selection mode. Hold RESET while pushing 9 to toggle OFF, CHANGE, or AD. Press POPULAR to save the change. If OFF, the automatic page change selection is disabled. If CHANGE, a page will flip[...]

Section 2: Installation & Programming 21822666 2-51 Table 2-5A. Menu & Command Descriptions Continued Code Description 27 3 Scroll Message - Message editor for the 2nd scrolling line of a 2 line display. See Programming the Rowe Message Center . (Not used in this model phonograph.) 27 4 4-Hour Clear - Displays and toggles the 4-Hour Clear o[...]

CD-100K Phonograph 2-52 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 33 Cancel Initialization - Cancels initializations that have been started with either of the previous options (30 or 31). Press POPULAR to perform this function. The display will blink when the command is executed. 34 Initialized - Displays the n[...]

Section 2: Installation & Programming 21822666 2-53 Table 2-5A. Menu & Command Descriptions Continued Code Description 4 1 Delay Time - Displays and sets the time between Autoplay selections or displays and sets the time between giving a Credit. Type the number in minutes then press POPULAR. This command is used only in STANDARD and CREDIT [...]

CD-100K Phonograph 2-54 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 48 XX Cat - Assigns categories to discs in Enhanced Autoplay. 4 9 Schedule SMTWTFS - The active days, time(s), categories, and delay(s) between Autoplay selections in Enhanced Autoplay. 5 PRICING - This menu allows the operator to change CD prici[...]

Section 2: Installation & Programming 21822666 2-55 Table 2-5A. Menu & Command Descriptions Continued Code Description 50 2 Coin SW2 = XX - Displays and sets the #2 COIN SWITCH VALUE. Type the new value and then press POPULAR. 50 3 Coin SW3 = XX - Displays and sets the #3 COIN SWITCH VALUE. Type the new value and then press POPULAR. 50 4 Co[...]

CD-100K Phonograph 2-56 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 52 PLAYS @ LEVEL : - Displays and edits # of plays or alternate plays at a given level, and sets alternate price times. 52 0 Not Used 5 2 1 Level 1 Plays = XX - Displays and sets the number of plays given for this credit level. Type the new value[...]

Section 2: Installation & Programming 21822666 2-57 Table 2-5A. Menu & Command Descriptions Continued Code Description 6 2 Premiums - Displays and sets premium selections. These selections (100 maximum) will be priced at 2 to 99 times the regular price (see Programming Autoplay, Premiums, Priorities, Lockouts, Pairs, and Menu Code 6995 ). 6[...]

CD-100K Phonograph 2-58 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 693 Lockout Count - Adds the selection to the LOCKOUT LIST (60) when the DISC CONDITIONS NUMBER OF SKIP OCCURRENCES reaches the programmed value. To change the LOCKOUT COUNT, type the new number and then press POPULAR. 6 9 4 Play Limit - Sets a m[...]

Section 2: Installation & Programming 21822666 2-59 Table 2-5A. Menu & Command Descriptions Continued Code Description 6992 Free Album - Allows entire albums to be selected if FREE PLAY (55) and ALBUM BUY (65) are ON. Hold RESET and press 9 to toggle this command ON and OFF. Press POPULAR to save your choice. 6993 Thank You On/Off - If set [...]

CD-100K Phonograph 2-60 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 74 All Audit Report - Starts all 4 audit reports. 75 Setup Report - Starts the phonograph Setup Report. 76 Error History Report - Starts the Accumulated Phonograph Errors Report. 77 Disc Condition Report - Starts the Disc Condition Report. 78 Bau[...]

Section 2: Installation & Programming 21822666 2-61 Table 2-5A. Menu & Command Descriptions Continued Code Description 89 ON/OFF Cycles - Displays and changes the number of ON/OFF cycles. 9 DEVICE SETUP - The DEVICE SETUP menu activates and defines the AMPLIFIER, VOLUME CONTROL, and IR REMOTE options. 90 AMPLIFIER - The AMPLIFIER menu activ[...]

CD-100K Phonograph 2-62 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 3 means CH3 volume up/down switch controls AMP CH3 volume. Any of CH1, CH2, or CH4 switches will adjust AMP CH1, CH2, and CH4 volumes (those 3-amp volumes are locked together). 4 means CH2 volume up/down switch controls AMP CH2 volume. Any of CH1[...]

Section 2: Installation & Programming 21822666 2-63 Table 2-5A. Menu & Command Descriptions Continued Code Description 904 Mic 1 Routing - Sets MIC 1 to route to any or all of the 6 different PREAMP output channels (left to right: AUX R, AUX L, CH1, CH2, CH3, CH4). If 0 on the display for the channel, the MIC will not route to that channel.[...]

CD-100K Phonograph 2-64 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 9096 Equalizer Ch 1,2 - Sets the Ch 1&2 5-band Equalizers. The range is 0 - 9 (left to right: CH1 - 59hz, 205hz, 790hz, 2.95khz, 12khz; CH2 - 59hz, 205hz, 790hz, 2.95khz, 12khz) 0 = maximum attenuation for particular frequency. 9 = minimum at[...]

Section 2: Installation & Programming 21822666 2-65 Table 2-5A. Menu & Command Descriptions Continued Code Description 90996 Playing Audio Muting - Sets the muting to the amp when playing an audio selection. Set any or all of the 8 different amp mute devices (left to right: AUDIO/VIDEO CONTROLLER OUT CH3&4, AUDIO/VIDEO CONTROLLER OUT CH[...]

CD-100K Phonograph 2-66 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 909993 Playing Audio Output Select Ch 1,2 - Sets the output select for channel pairs 1&2 of the amp when playing audio. Set for one of following: (mono/mono = 1 , aux/aux = 2 , mono/aux = 3 , aux /mono = 4 , stereo/stereo = 5 ). Type in 1, 2,[...]

Section 2: Installation & Programming[...]

CD-100K Phonograph 2-68 21822666 Table 2-5A. Menu & Command Descriptions Continued Code Description 9 11 Remote Selections - Displays and sets remote selections to ON, OFF, ICD, or XCD. If this command is set to ON, you can always use the IR remote control to make a selection or give a credit. If this command is set to OFF, remote control selec[...]

Section 2: Installation & Programming 21822666 2-69 Table 2-5B. CD-100K Command Index Function Menu Command Album free - on/off OPTIONS 6992 maximum tracks in a row OPTIONS 67 Select - on/off OPTIONS 65 Amplifier (4-channel preamp only) autoplay/bgm volume DEVICE SETUP 96 bgm delay time DEVICE SETUP 93 bgm volume maximum AMPLIFIER 9 08 equalize[...]

CD-100K Phonograph 2-70 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Autoplay autoplay/bgm volume DEVICE SETUP 96 autoplay days of the week enable AUTOPLAY 4 4 autoplay only discs OPTIONS 696 autoplay start time AUTOPLAY 4 2 autoplay status on/off AUTOPLAY 4 7 autoplay stop time AUTOPLAY 4 3 cancel autoplay select earl[...]

Section 2: Installation & Programming 21822666 2-71 Table 2-5B. CD-100K Command Index Continued Function Menu Command Credit autoplay AUTOPLAY 40-44, 47 clear credits STATUS 8 2 display or change credits STATUS 8 4 free play - on/off PRICING 55 keep credit after power failure on/off OPTIONS 63 levels PRICING 511-515 multiplier PRICING 53 “my [...]

CD-100K Phonograph 2-72 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Factory loads factory load all - automatic OPTIONS 6996 factory load amplifier settings DEVICE SETUP 95 factory load pricing PRICING 5 9 factory load test code OPTIONS 6997 Free play album OPTIONS 6992 on days PRICING 58 start time PRICING 58 status o[...]

Section 2: Installation & Programming 21822666 2-73 Table 2-5B. CD-100K Command Index Continued Function Menu Command Modem answer off time MODEM 08 2 answer on time MODEM 0 81 connect delay MODEM 08 5 # of post/page retries MODEM 0895 # of rings to answer on MODEM 0 83 page (send errors to a pager) on/off MODEM 0896 page to post (send errors t[...]

CD-100K Phonograph 2-74 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Popularity clear disc pop AUDITS 1 3 clear sel pop AUDITS 1 6 disk AUDITS 17,18 least popular discs AUDITS 1 8 most popular discs AUDITS 1 7 most popular selections AUDITS 1 9 report REPORTS 7 2 Pricing bill values PRICING 506-509 buy an album - on/of[...]

Section 2: Installation & Programming 21822666 2-75 Table 2-5B. CD-100K Command Index Continued Function Menu Command Reports all audit REPORTS 7 4 baud rate REPORTS 78 cancel REPORTS 7 9 carriage return delay REPORTS 7 8 cash REPORTS 7 0 disc conditions REPORTS 77 eliminate/retain spaces in report REPORTS 78 error history REPORTS 7 6 non reset[...]

CD-100K Phonograph 2-76 21822666 Table 2-5B. CD-100K Command Index Continued Function Menu Command Software level STATUS 8 8 “Thank You” message on/off OPTIONS 6993 Time and date change INITIALIZE 3 8 and 39 Tracks in a row OPTIONS 67 Versions STATUS 8 8 PROGRAMMING AUTOPLA Y , PREMIUMS, PRIORITIES, LOCKOUTS, AND P AIRS Each of these seven opti[...]

Section 2: Installation & Programming 21822666 2-77 For Priorities Programming Type Display Shows 6 *OPTIONS* 1 PRIORITY 00 ---- For Premiums Programming Type Display Shows 6 *OPTIONS* 2 PREMIUMS 00 ---- For Pairs Programming Type Display Shows 699 *MORE OPTIONS 2* 9 PAIRS SEL 00 ---- If a selection is not programmed for the displayed sequence [...]

CD-100K Phonograph 2-78 21822666 LOCKOUT AND TIMED LOCKOUT MODES To lockout a disc, enter the two-digit disc number followed by two zeros. To lockout a selection, enter the four- digit selection number. If you are at Security Level 3 and have one of the four programming options on the display, you will notice the 1’s digit of the sequence number [...]

Section 2: Installation & Programming 21822666 2-79 1 . Turn Timed Freeplay On Example: The example shown in Figure 2-11 shows the Multiple Freeplay On/Off Times sheet filled out for Sunday and Monday. To make keying the schedule in easier, use this form to make your plans, then key in the schedule (Photocopy the original of this form, which is[...]

CD-100K Phonograph 2-80 21822666 2 . Plan the Schedule Scheduling Freeplay is simple, just remember these rules: SCHEDULING RULES The schedule must have one ON time and a corresponding OFF time for each scheduled time. These times must follow these simple restrictions: Examples: Monday O N O F F Wrong - The OFF time is set before the ON time. 1 10:[...]

Section 2: Installation & Programming 21822666 2-81 4 . Copy the Schedule Now to program the phonograph for the rest of the week. You can copy the schedule you just made into any/all of the remaining days of the week. To make the schedule for Tuesday through Friday the same as Monday: A . Move the cursor until the M for Monday is blinking. B . [...]

CD-100K Phonograph 2-82 21822666 Character Map Note #1. A A . Inserting or Changing Messages: Push 2 (see Note #1) When the desired item is flashing, push POPULAR to execute. Hold RESET and repeatedly push 3 to select item. 1. The display screen reads MSG 1 EDT DEL VU. • MSG 1- Selects a message (from number 1-8) to edit. • EDT- Allows you to e[...]

Section 2: Installation & Programming 21822666 2-83 Example for programming a new message When this example is complete, the display will read HELLO TOM as message number three. A . Follow step AA to obtain MSG 1 EDT DEL VU. B . Push key 3 to edit message three. Push POPULAR. C . Push POPULAR to go to the edit screen. D . Display should be blan[...]

CD-100K Phonograph 2-84 21822666 Example for correcting or editing an existing message When the example is complete, the display will read TOPS IN MUSICLAND for message 6. Previously, this message displayed TOYS FOR TOTS. Note - all editing keys will be used to show their effect on the message. A . Follow step AA to obtain the display MSG 1 EDT DEL[...]

Section 2: Installation & Programming 21822666 2-85 12 345678 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 AM S G 1D E LE D T V U BM S G 6 ED T D E L VU CO Y S F O R DT O P SF O R T O T ET O P S I OR T O T S FT O P S I N RT O T S GO P S I N _ _T O T S HP S IN M TO T S IS I N M U OT S J1 S I N M U __ O T S J2 I N M U S OT S KI N M U S I T S L1 I N M U S I S L2[...]

CD-100K Phonograph 2-86 21822666 BB. Setting the daily message display time(s): Push 0 (see NOTE #1 on Page 2-56) When you initially program a message, you must activate the daily message display timer for that message. This section discusses how to program messages to play at any given time of day for the week. There are three available ON/OFF tim[...]

Section 2: Installation & Programming 21822666 2-87 Example for setting up the message daily timer When this example is completed, message 4 will display every day from 12:00 (00:00) midnight until 11:59 (23:59) PM (see Table 2-8 for Display Example) . A . Follow step BB to obtain display MSG SCH SMTWTFS. B . Hold RESET, push 3 once. The M is n[...]

CD-100K Phonograph 2-88 21822666 Setting the Master ON/OFF Date: Push 1 (see Note #1 on Page 2-56) Messages 1-8 can play every day unless they are changed in the MASTER ON/OFF DATE menu. By scheduling messages to play on specific dates, you may tailor messages (such as “HAPPY BIRTHDAY JOE”) to play on special dates. The display screen reads 1 O[...]

Section 2: Installation & Programming 21822666 2-89 SETTING UP ENHANCED AUTOPLA Y 1. Set COMMAND 40, AUTOPLAY IS, to: ENH (COMMAND 41, DELAY, is not used in Enhanced Autoplay). 2. Set COMMAND 42, START TIME, to: 00:00 (this is the factory setting). 3. Set COMMAND 43, STOP TIME, to: 23:59 (this is the factory setting). 4. Set COMMAND 44, ON DAYS[...]

CD-100K Phonograph 2-90 21822666 Setting Up Enhanced Autoplay Schedules (Commands 48 and 49) Enhanced Autoplay provides up to 20 events each day of the week for a total of 140 events per week. Before you begin entering specifics for these events, some preliminary work must be done. If you take the time to do this work now, you will find that planni[...]

Section 2: Installation & Programming 21822666 2-91 2. Make the Category Entries KEY FUNCTIONS Some key combinations have slightly different meanings in the Autoplay menus. Table 2-9 shows what these key combinations do in the Schedule (display shows: SCHEDULE SMTWTFS) and in the Set Time (SU 01 TIME) modes. Use the DISC mode to enter a disc nu[...]

CD-100K Phonograph 2-92 21822666 USING RESET + 9 IN THE CATEGORY MENU RESET + 9 toggles between DISC mode and CATEGORY mode. DISC MODE DISC mode (the = sign is ahead of the disc number) only allows you to change the disc number that is displayed. Use this mode to change the disc number easily. This mode is particularly useful if you are changing or[...]

Section 2: Installation & Programming 21822666 2-93 3 . Plan the Schedule The schedule determines on which day and at what time of day that Autoplay categories are allowed to play (this is called an event). If the phonograph has the optional volume control module installed, the schedule can adjust the phonograph’s volume at the beginning of e[...]

CD-100K Phonograph 2-94 21822666 Working Example of Enhanced Autoplay P AUL ’S AUTOPLA Y SCHEDULE Paul wants his Rowe Jukebox to automatically play music at certain times of the day. Paul wants to have the music played every day in the following format: • Easy Listening, at a reduced volume level, for breakfast from 6:30 to 7:30 AM with a one-m[...]

Section 2: Installation & Programming 21822666 2-95 DISC CATEGORY LIST Date ____ 9-13-02 _____ Location ________ Paul’s __________ Name each of the eight categories and then assign the discs to each category. Category # Category Name Category # Category Name 1 ___ All Discs ______________________ 5 ___ Urban _________________________ 2 ___ Po[...]

CD-100K Phonograph 2-96 21822666 3. Paul then enters the information shown in Figure 2-12 in the following sequence: A . Paul enters the SERVICE mode. The list that follows shows what keys he presses and displays what he sees after he presses the keys. B . The Steps: Paul repeats Steps 8, 9, 10, and 11 to assign all discs according to the Disc Cate[...]

Section 2: Installation & Programming 21822666 2-97 AUTOPLAY SCHEDULE Location: Paul’s Restaurant Date: 6-8-95 Fill in the Autoplay event times, delay times, categories, and volume changes before you make the actual scheduling changes. Day: SMTWTFS Event Time Categories Delay Vol 1 Vol 2 1 6 : 30 _____ 3_____ __ 1__ __ -3__ __ -3__ 2 7 : 3 0 [...]

CD-100K Phonograph 2-98 21822666 Step # Keystroke 14 Press Keys 0, 7, POPULAR, 3, 0, POPULAR 15 Press RESET + 9 16 Press RESET + 9 17 Press RESET + 9 18 Press RESET + 9 19 Press RESET + 9 20 Press RESET + 3 21 Press Keys 1, 4, POPULAR, POPULAR 22 Press RESET + 9 Display SU 02 TIME 7:30 SU 02 [--------] SU 02 DELAY 00 SU 02 VOL CH1 0 SU 02 VOL CH2 0[...]

Section 2: Installation & Programming 21822666 2-99 This completes the entries for the 6 events on Sunday’s schedule. Copying the Schedule The last step is to program the phonograph for the rest of the week. Paul decides to save some time by copying the schedule into the remaining days of the week. To make the schedule for Monday through Satu[...]

CD-100K Phonograph 2-100 21822666 This page intentionally left blank.[...]

Worksheet Masters - - - - - - - - On the following pages you will find blank worksheet masters for Multiple Free Play On/Off Times, the Disc Category List, and the Autoplay Schedule. Carefully remove these masters from this manual and copy them freely for your use. Note that extra room has been left on the left-hand margin of each sheet so that it [...]

[...]

WM-2 DISC CATEGORY LIST Date _______________ Location ____________________ Name each of the eight categories and then assign the discs to each category. Category # Category Name Category # Category Name 1 _________________________________ 5 _________________________________ 2 _________________________________ 6 _________________________________ 3 _[...]

[...]

MULTIPLE FREE PLAY ON/OFF TIMES Fill in the START times, STOP times, and the COMMENTS before you make the actual scheduling changes. Sunday O n O f f Comment 1 ___:___ ___:___ ___________________ 2 ___:___ ___:___ ___________________ 3 ___:___ ___:___ ___________________ Monday O n O f f Comment 1 ___:___ ___:___ ___________________ 2 ___:___ ___:_[...]

[...]

AUTOPLAY EVENT SCHEDULE Day: _______________ Location _______________ Fill in the Autoplay event times, delay times, categories, and volume changes before you make the actual scheduling changes. Day: _______________ Event Time Categories Delay Vol 1 Vol 2 1 _____:_____ ________________ _______ _______ _______ 2 _____:_____ ________________ _______ [...]

[...]

SERIAL # ________________ LOCATION___________________ ROWE CD PHONO OPERATOR’S SETUP SHEET SUGGESTION: Record any changes on this log and keep for future reference. INSTRUCTIONS 1. Items in parentheses do not appear on the digital display. 2. Customer fills in blanks where program differs from factory settings. MENU MENU FACTORY OPERATOR COMMAND [...]

[...]

WM-6 * INITIALIZE * 3 5 CONDITION LOG 0 5 ___________________________ 3 6 SKIP CANCEL 9 9 ___________________________ 37 TI ME C AN CE L 99 ___________________________ 3 8 TIME 1 EASTERN STD. ______:______:______________ 39 DATE 2 ___________________________ * AUTO PLAY * 3 4 0 AUTO PLAY IS (STD/ENH/CDT/OFF) S T D ___________________________ 4 1 DE[...]

[...]

* OPTIONS * 6 0 LOCKOUTS (50 MAX) 5 00______ 00_________________________ 01_________________________ 02_________________________ 03_________________________ 6 1 PRIORITY (100 MAX) 5 00______ 00_________________________ 01_________________________ 02_________________________ 03_________________________ 6 2 PREMIUMS (100 MAX) 5 00______ 00___________[...]

[...]

* REPORTS * 7 8 BAUD RATE 9600 ___________________________ (600/1200/2400/4800/9600) CR MS DELAY 0 ___________________________ SPEC REPORT 0 ___________________________ * DEVICE SETUP * 9 2 MAIN DISP LINE 2 ___________________________ 9 3 BGM DELAY TIME 1 0 ___________________________ 9 4 LEAD SINGER (LEFT/RIGHT) RIGHT ___________________________ 9[...]

[...]

* MORE AMP 3 * 909990 SBY MUT 00000000 ___________________________ 909991 BGM MUT 00000000 ___________________________ 909992 MIC MUT 11111111 ___________________________ 909993 PLY AU MOD 1/2 5 ___________________________ 909994 PLY AU MOD 3/4 5 ___________________________ 909995 PLY KA MOD 1/2 5 ___________________________ 909996 PLY KA MOD 3/4 5[...]

[...]

Section 2: Installation & Programming 21822666 2-101 OPTIONAL STUDIO SOUND SYSTEM Introduction The Studio Sound system can use one or two digital power amplifiers. Each 2-channel digital power amplifier is rated 1000 (500 x2) watts RMS @ 2 ohm load. The 4-channel Audio/Video Controller replaces the 2-channel preamplifier; and has 3 microphone j[...]

CD-100K Phonograph 2-102 21822666 Audio/Video Controller Description The extremely versatile 4 channel Audio/Video Controller transforms audio signals from the CD player, microphones, background music equipment (tuner, tape, etc.), and other sound processors/equipment/ systems, into signals for the Power Amplifier. Also, it has video and audio rela[...]

Section 2: Installation & Programming 21822666 2-103 Amplifier Factory Load The AUDIO/VIDEO CONTROLLER has many programming options. For your convenience, service mode menu item 95 restores the amplifier programming to factory settings. Other Configurations All the programming options and RCA jacks are covered in the audio block diagram, audio [...]

CD-100K Phonograph 2-104 21822666 • RCA jacks for surround sound • Jacks marked: • CH1 - CH2 SIGNAL OUTPUT, CH1 + CH2 SIGNAL OUTPUT • CH3 - CH4 SIGNAL OUTPUT, CH3 + CH4 SIGNAL OUTPUT • RCA jacks for back end signal outputs • Jacks marked: • CH1 SIGNAL OUTPUT, CH2 SIGNAL OUTPUT • CH3 SIGNAL OUTPUT, CH4 SIGNAL OUTPUT • CH1 and CH3 a[...]

Section 2: Installation & Programming 21822666 2-105 This page intentionally left blank.[...]

CD-100K Phonograph 2-106 21822666 CD/STEREO MECHANISM INPUT L (J41) CD/STEREO MECHANISM INPUT R (J42) STEREO A (BGM) INPUT L (J40) STEREO A (BGM) INPUT R (J43) STEREO B INPUT L (J39) STEREO B INPUT R (J44) MONO C (BGM) INPUT (P2) (J30) FRONT END PROGRAM SELECTOR and MUTING AUTOMA TIC VOLUME CONTROL (A VC) and MUTING L CHAN R CHAN L CHAN. AUX. OUT W[...]

Section 2: Installation & Programming 21822666 2-107 RESET RESET ROWELINK COM. CONTROL COM. CONTROL ROWELINK ISOLA TED INTERF ACE FROM/TO CCC Modular Jack (J29) STUDIO SOUND AUDIO BLOCK DIAGRAM Extremely Cool Audio/Video Controller Extremely Cool Audio Digital Power Amplifier POWER SUPPL Y Input 50 V AC CT Input 20 V AC + 60V - 60V + 12 V (P1) [...]

CD-100K Phonograph 2-108 21822666 BGM Mode go to BGM after delay Playing Karaoke Mode CD (J41, J42), Stereo A (BGM) (J40, J43), Stereo B (J39, J44), Mono C (BGM) (J38) 90993 Front-end Program Selected in Standby Mode 90994 Front-end Program Selected in BGM Mode 90991 Front-end Program Selected in Playing Karaoke Mode mono(CH1+CH2) / mono(CH1+CH2) a[...]

Section 2: Installation & Programming 21822666 2-109 Factory setting sets all mic's to paging, and phonograph type to CD. Factory setting is RIGHT volume is 63 (maximum) and equalizers have factory settings. CD (J41, J42), Stereo A (BGM) (J40, J43), Stereo B (J39, J44), Mono C (BGM) (J38) 904 -906 Mic Routing Range of each band is 0 to 9 F[...]

CD-100K Phonograph 2-110 21822666 V olume Control Unit Blue Y ellow Green Red Black White 6 5 4 3 2 1 +9 COM +9 VDC ROWELINK A ROWELINK B MUTE NOT SYSTEM RESET 1 2 3 4 5 6 6 5 4 3 2 1 6-Conductor Modular W all Jack (Mount by VCU) 9 VDC @ 100 ma W all Plug-in Power Supply - + 6-wire Modular Cable Rowelink A Rowelink B Existing 3-wire Cable How to re[...]

INTRODUCTION Routine and preventive maintenance are to be performed on your normal periodic service call. This section discusses how to change compact discs and titles, how to collect money, audit statistics, and preventive maintenance procedures. DOING AN AUDIT The following pages describe how to: 1. Access the phonograph’s audit menus and extra[...]

CD-100K Phonograph 3-2 21822666 Cash Audits 1. Type 100. This displays the CURRENT CASH value. Record the CURRENT CASH figure in your usual way and go to the next step. 2. Press and hold RESET, and then press 1. This will move you down to the next display. Record the CASH VALUE in the usual way. 3. Repeat Step 2 until you do the last CASH audit, wh[...]

Section 3: Routine Service 221822666 3-3 3. Press and hold RESET while you press POPULAR twice. This returns you to the main menu. Most Popular Selection 1. Type 19. The most popular selection number will be displayed. 2. To display the next most popular selection, press and hold RESET, and then press 3. Press and hold RESET, and then press 3 to di[...]

CD-100K Phonograph 3-4 21822666 CHANGING CD’S AND TITLES The procedure for loading CD’s and titles into an empty phonograph is different from the procedure to change CD’s and titles. Please be sure you are following the procedure that describes your situation. Preparing Titles for the Title Holder - See Pages 2-2 thru 2-5 Changing Discs You c[...]

Section 3: Routine Service 221822666 3-5 5. Repeat Step 4 until all discs have been changed. 6. Release the two catches holding the keyboard/display. 7. Place the SERVICE switch in the SERVICE mode and check that * SERVICE MODE * is on the keyboard display. 8. Type 31 and the display will show PROGRAM INIT - -. Enter the CD numbers that you have ch[...]

CD-100K Phonograph 3-6 21822666 COMPLETE AUDIT COMMAND LIST Table 3-1 is a complete list of the Audit commands with an explanation of what each command does. Table 3-1. Audit Commands Command Description 1 AUDITS - Are the functions and menus that allow you to display and reset the various accumulated figures for money, popularity, number of plays,[...]

Section 3: Routine Service 221822666 3-7 Table 3-1. Audit Commands Continued Command Description 19 Display the Most Popular Selection - Displays the most popular selection number (Disc 00-99 followed by Selection 00-99, a total of four digits) followed by the number of plays (9999 maximum) that selection had. To display the next Most Popular selec[...]

CD-100K Phonograph 3-8 21822666 Table 3-1. Audit Commands Continued Command Description 1 1 PLAY AUDITS - Allows you to display, but not change, credits, autoplays, mechanism plays, and album plays. 1 1 0 Free Credits - Displays the number of free credits given since the last time the CLEAR PLAYS command (Selection 5 in the AUDITS menu) was used. 1[...]

Section 3: Routine Service 221822666 3-9 Table 3-1. Audit Commands Continued Command Description 122 Coin - Displays total coin cash received by the coin acceptor. 12 3 Wallbox - Displays total cash received by all Wallboxes. 12 4 Free - Displays total free credits. 12 5 Paid - Displays total paid for credits. 1 26 Most Popular - Displays the total[...]

CD-100K Phonograph 3-10 21822666 COLLECTING MONEY 1. Open the top door and unlock the bill acceptor bill box by reaching in behind the bill acceptor. 2. Remove the currency, then close and lock the bill box. 3. Close the top door. PREVENTIVE MAINTENANCE Preventive maintenance should be performed at the regular intervals specified, while adjustments[...]

Section 3: Routine Service 221822666 3-11 CD Player Laser Lens The CD player laser lens can collect dust, dirt, and smoke. These deposits can cause various intermittent problems that may, in time, become more severe. To avoid these problems, we recommend that you clean the laser lens occasionally. This interval can be as often as every other month,[...]

CD-100K Phonograph 3-12 21822666 COIN ACCEPTORS (O ptional) COIN MECH (Optional) The phonograph is equipped to physically mount a 3.5 inch wide (80mm) coin acceptor, mechanical or electronic version, with an accepted coin diameter from .7 (18mm) to 1.2818 (31mm). Mechanical A valid coin is determined by the actuation of the microswitch (Figure 3-4)[...]