Russound CAM6.6X-S1/S2 инструкция обслуживания

CAM6.6X-S1/S2 System 6-Zone, 6-Source XM Receiver and UNO Smar t Keypads INSTRUCTION MANUAL[...]

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a[...]

T ABLE OF CONTENTS 3 USER SECTION Pr oduct Introduction ............................................................................................................6 Component Guide CAM6.6 Controller.............................................................................................................. .7 UNO-S1 Keypad .......................[...]

4 T ABLE OF CONTENTS Making Connections UNO Keypad Port Connections ...........................................................................................36 Source Audio Input Connections .........................................................................................37 Source IR Input Connections .....................................[...]

5 USER SECTION Component Guides Explains front panel featur es of the CAM6.6 contr oller , UNO-S1 keypad, UNO-S2 keypad and UNO-LRC1 remote contr ol. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available thr ough the User Menu. IN P U T M UTE LA ST SLEEP IN F O MENU IN PU T EN TER 1 2 3 4[...]

6 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6X-S1/S2 System to enhance your home with distrib- uted audio. It combines the CAM6.6 Controller Amplifier and UNO keypads into a state-of-the-art home audio system that blends seamlessly with your unique lifestyle and prefer ences. Besides distributing and controlling six audio sou[...]

7 USER COMPONENT GUIDE CAM6.6 Contr oller-Fr ont Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICA TORS - Indicates when a room is on (gr een) or off (red) 1 2 2 1 Main Power and Zone Status The power switch for the CAM6.6 controller is "on" in the up position. Any active room is indicated on the fr ont of the [...]

8 USER COMPONENT GUIDE UNO-S1 Keypad-Fr ont Panel LCD P ANEL - 5-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the [...]

9 CD PLAYER 1 LCD P ANEL - 12-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room IR RECEIVER - R[...]

10 USER COMPONENT GUIDE UNO-LRC1 Remote Contr ol LOCAL DEVICE BUTTONS - Select local source to be contr olled by UNO-LRC1. SETUP - Use for programming UNO-LRC1 using the built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNO Keypad for control by UNO-LRC1. ROOM ON/OFF - T urns room on and off while in the UNO mode. NUMBER BUTTONS[...]

11 USER OPERA TION UNO-S1 Keypad Zone On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad. This will also p[...]

12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. T o enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes while using the User Menu: Press and hold to adjust featur[...]

USER OPERA TION UNO-S2 Keypad 13 Zone On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad. This will also p[...]

14 The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. The following keys are used to navigate and make changes while using the User Menu: T o enter the User Menu, press and hold during normal operation. T o exit the User Menu, press and r elease . Adjust feature setting (incr ement). Adjust f[...]

15 XM Radio Activation XM Radio is over 100 channels of radio broadcasts with the signal deliver ed by satellite and (depend- ing on location) transferred by terr estrial antennas. The radio is a subscription-based service with a monthly provider fee and an activation char ge. XM radio broadcasts several channels for pr eview but will not broadcast[...]

16 XM Radio Modes There ar e four user “modes” for selecting music on the XM T uner: Preset (default or normal) Category Search Now Playing Display Prefer ences . These modes are accessed thr ough certain button and key presses fr om the tuner panel, remote controls and keypads. When choosing modes, if no choice is made after 20 seconds, the tu[...]

17 Preset (default) Mode This is the normal operating mode of the XM tuner for channel up and down, bank selection and memory presets. Next Preset This button press accesses the next saved pr eset (6 pr esets for each bank) in the chosen bank. Previous Pr eset This button press accesses the pr evious saved pr eset in the chosen bank Next Bank This [...]

18 Category Search Mode ( 1 1 . . C C A A T T S S E E A A R R C C H H ) XM Radio is or ganized by Channel Category (e.g., Rock, Country, News ). W ithin each category is a series of channels (e.g., T op T racks, Bluegrass Junction, XM Classics). Channel selection in this mode is refined to scr olling only those channels in the selected category . N[...]

19 Now Playing Mode ( 2 2 . . N N O O W W P P L L A A Y Y N N G G ) This mode displays information about the current XM selection. Appr opriate button pr esses access the next or previous information item. N N A A M M E E : : Displays the artist’s name, featur e name or program name (news, talk, sports). T T I I T T L L E E : : Displays the song [...]

20 UNO-S1 Keypad Contr ol of T uner Selecting the tuner On the UNO-S2 keypad, press to select the XM T uner by choosing the tuner’ s preassigned source number (1). Selecting the desired channel Press and hold and to activate manual channel selection. Once active, press or to scroll thr ough channels. The channel will scroll twice on the keypad th[...]

21 USER INTERNAL SOURCE - XM TUNER UNO-S2 Keypad Contr ol UNO-S2 Keypad Contr ol of T uner Selecting the tuner On the UNO-S2 keypad, press to select the XM T uner by choosing the tuner’ s preassigned source number (1). Selecting a Mode Push to toggle between XM modes. Exiting a Mode Press to exit XM mode selection menu. Selecting the desired chan[...]

22 XM Classics TUNER SELECTION - Select source number assigned to XM TUNER (1) TUNE UP/DOWN - Used for manual channel selection SELECT - XM operating mode toggle SEEK - (press) Exit curr ent XM mode SCAN - (press and hold) XM Signal Str ength mode toggle MUTE - Mutes/unmutes tuner audio output BANK SELECT - Used for bank selection (press and hold) [...]

23 USER INTERNAL SOURCE - XM TUNER UNO-LRC1 Remote Contr ol UNO-LRC1 Remote Contr ol of T uner Selecting the tuner T o select the XM tuner , push and choose the source number pr eassigned to the XM T uner (1), or use the UNO numeric source inputs at the bottom of the UNO-LRC1. Selecting a Mode Push , or to toggle between XM operating modes. Exiting[...]

24 POWER - Power managed by CAM6.6 NUMERIC INPUT - Number buttons for direct input of channel, preset, bank (pr ess). Memory preset save (pr ess and hold) TUNE UP/DOWN - Incrementally scr olls through channels EXIT - Exit XM operating mode TUNE UP/DOWN - Incrementally scr olls through channels SELECT - XM Operating mode toggle MENU - XM Operating m[...]

25 INST ALLER SECTION Getting Star ted Includes an installation overview , including tools needed and wiring instructions. Component Guides Reviews front and back panel featur es of the CAM6.6 contr oller and the UNO-S1 and UNO-S2 keypads. Keypad Installation Explains UNO-S1 and UNO-S2 keypad installation and wiring. Making Connections Details fron[...]

26 INST ALLER GETTING ST ARTED Unpacking the System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visible signs of damage. If you encounter any concealed damage, consult your Russound dealer before pr oceeding to install the unit. • Retain the sales receipt as it establishes the du[...]

INST ALLER WIRING INSTRUCTIONS RJ-45 Connections The CA T-5 T568A wiring standar d shown on the right is used for the RJ-45 terminations. Keypad Wiring For the UNO-S2 and UNO-S1 keypad, the follow- ing connections are used to terminate the CA T-5 wire to the 110 punchdown on the keypad: CA T -5 WIRE COLOR TYPE Br own . . . . . . . . . . . . . . . .[...]

28 17 16 14 12 13 15 19 18 20 CAM6.6 A NTENNA RNET LINK IN AND LINK OUT - Links multiple CAM6.6’ s, also links future Russound components that are RNET compatible RS-232 INTERF ACE - The RS-232 Inter face allows the zones to be controlled by PC or other devices that have an RS-232 Interface. The RS-232 Inter face also allows for firmware updates [...]

29 INST ALLER COMPONENT GUIDE CAM6.6 Contr oller-Rear Panel OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, XM radio module AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and 240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cor d connection for the CAM6.6 FUSE HOLDER - Holds a replaceabl[...]

30 INST ALLER COMPONENT GUIDE UNO-S1 Keypad-Update Port OS Update/Run Jumper -The pins are jumper ed when performing an OS update on the key- pad, and removed during normal operation. (T ypically needed only on a keypad that has never been updated) Setup Button - Activates information and update menus for the keypad. OS Update Port - Used to update[...]

31 INST ALLER COMPONENT GUIDE UNO-S1 Keypad-CA T -5 Connection 110 PUNCHDOWN CONNECTOR - T ermination for CA T-5 connection between the UNO-S1 Keypad and the CAM6.6 controller . 1 1 N EWMARKET , NH U.S.A. DESIGNED IN USA MADE IN KOREA BR GR OR +12V BR/W +12V GND GR/W GND OR/W COM A BL/W COM B BL IR OUT UNO-S1 System Control Keypad ST A TUS IN CA T [...]

32 INST ALLER COMPONENT GUIDE UNO-S2 Keypad-Update Port SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad OS UPDA TE PORT - The OS Update Por t is used to update the UNO-S2 Keypad oper- ating system software in the futur e. If an update is r eleased, it will be available online through the Document Center on www .russound.com. Loo[...]

33 KOREA EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver . OS UPDA TE JUMPER - Selects “Run” or “OS Update” mode. RESET BUTTON - Reset whenever changing from RUN to OS update 110 PUNCHDOWN CONNECTOR - T ermination for CA T-5 connection between the UNO-S2 Keypad and the CAM6.6 controller . 1 2 3 4 2 3 1 4 INST ALLE[...]

34 INST ALLER UNO-S1 KEYP AD-INST ALLA TION Keypad Location The best infrared r emote performance is achieved with the keypad away from any dir ect sunlight, plasma TV , and low voltage lighting controls. Also consider convenience when choosing a location. Choose a place that is easily seen from the posi- tion where a person is most likely to be lo[...]

35 INST ALLER UNO-S2 KEYP AD-INST ALLA TION Keypad Location Plastic Double-Gang Electrical Box UNO-S2 Back Plate Scr ew Screw Screwless Cover Plate Keypad Installation T o install a double-gang keypad, you will need to use a UL/CSA approved plastic double-gang electrical box. Route C AT-5 w i re to the junction box from the CAM6.6. Use the supplied[...]

36 CAM6.6 A NTENNA CA T-5 Cable CA T-5 Cable PM Mod 3D with RJ-45 CA T-5 Cable SA-ZX3 1201A/1A Pow er Supply CAM6.6X The UNO System Keypad Ports are located on the back of the CAM6.6 in the top left of center . Connections made at the UNO Keypad Ports are made using CA T-5 T568A RJ-45 wir e configura- tion. CA T-5 is color-coded for ease of install[...]

37 Source Audio Connections The CAM6.6 supports up to six audio sources. The Source Inputs ar e located at the back panel. The Source 1 input serves a dual purpose. If the CAM6.6 optional internal source is used, the Source 1 inputs ar e not available, and the switch next to it is set to “Internal Source Output.” If the Optional Internal Source[...]

38 INST ALLER MAKING CONNECTIONS Common IR Connection Common IR Connections The Common IR jack on the rear of the CAM6.6 allows control of any sour ce equipment without that source being selected on the keypad. The connection for the COM IR jack is made using an IR emitter with a 1/8’’ plug. The Russound 845.1 single IR emitter is recommended, [...]

39 The speakers are connected to the CAM6.6 using modular snap connectors. Each of these color-coded connectors is designated for the speaker set of a particular amplified zone. T o avoid confusion, connect one zone speaker set at a time starting with Zone 1, taking care to keep zone and speaker wire identities straight. Note: An 8 Ohm minimum spea[...]

40 The CAM6.6 has two Zone Audio outputs, on Zone 1 and Zone 2. Each of these zone audio output connections features a ster eo line out RCA connection plus a switch to allow for either a fixed or a variable line level output. When set to V ariable, the keypad volume level af fects this output. In the Fixed position, keypad volume level will not cha[...]

41 CAM6.6 A NTENNA 12VDC Home Theater T rigger In This 12VDC T rigger input is used to control Power Management of the audio sources possibly being shared with a home theater system. When the last zone on the CAM6.6 is turned off, 12VDC presence to the trigger input will pr event the sources that ar e on fr om being turned of f. The connections for[...]

42 12VDC Mute T rigger In When 12VDC is applied to the Mute T rigger In, the system will fully mute any source connected to the Source Audio Input. The connections for the trigger are made using a two-conductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is negative (-). This allows for the connection of an external o[...]

43 The RNET Link In and Link Out is used to con- nect two or more CAM6.6 or CA V6.6 con- trollers. The connection is made using a CA T-5 patch cable from the Link Out of the master CAM6.6 and into the Link In of the next con- troller . Along with RNET data signals, the RNET Link In and Link Out jack passes the six source IR signals. These are only [...]

44 The CAM6.6 supports RS-232 communication with various third party automation systems or PC for programming of the contr oller . The RS- 232 com port is located on the back of the CAM6.6 and uses a DB-9 cable connection. For RS-232 protocol and the backup PC application, see the Document Center at www .russound.com. Look for the T echnical Docume[...]

45 INST ALLER MAKING CONNECTIONS Optional Internal Source - XM T uner Antennas CAM6.6 XM Antenna Connect the included XM antenna for XM recep- tion to the back panel of the XM module. The antenna comes with 20 feet of cable. If this length is not sufficient, there ar e aftermarket antenna kits available for custom lengths. Position the antenna near[...]

46 Before pr oceeding to the system pr ogramming section, it’s important to conduct an initial test to determine that the hardwar e components ar e working properly . 1. Connect the speaker wires fr om Zone #3 to the CAM6.6 Zone #3 speaker output connectors. 2. Connect an UNO-S1 or UNO-S2 keypad to Keypad Port #3 on the rear of the CAM6.6. 3. Con[...]

This manual includes items that are designed to assist in the pr ogramming pr ocess. Forms (Pages 49-51) Three blank r epr oducible forms are included as planning tools when determining sour ces, settings and zone prefer ences. The Sour ce and Zone Information forms and the Macro Editor form should be completed before pr ogramming, and r eferred to[...]

48 3. Basic Setup (SOURCE SETUP) (Pages 55-56) This procedur e is mandatory to set up each sour ce for keypad source contr ol and is the cornerstone of the programming pr ocess. 4. Peripheral Setup (Pages 53-55) (FOR OPTIONAL INTERNAL SOURCE) This procedur e pr ovides setup and naming procedur es for the XM tuner . It includes assigning a cus- tom [...]

49 <XM> Russound N/A Peripher al N/A N N/A N N/A N/A INST ALLER SETUP FORMS[...]

50 Mute INST ALLER SETUP FORMS[...]

51 INST ALLER SETUP FORMS[...]

52 INST ALLER INST ALLA TION MENU OVERVIEW There ar e thr ee item types in the installation menu: Menu Item (m) – Acts as a folder that holds procedur es and/or featur e parameters. Pr ocedure (p) – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key . Once you begin a procedure, the system will pr omp[...]

53 The following items make up the Installation Menu: PERIPH SETUP (PerSu) SOURCE SETUP (Sr cSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Peripheral Setup allows the CAM6.6’ s optional internal source to be configur ed. The following items can be found [...]

INST ALLER INST ALLA TION MENU 2. BANK NAME – Use the up/down keys to select a character and left/right keys (BnkNm) to change a character position. A blinking cursor indicates the placement of the character being entered. Names can be fr om 1 to 12 characters in length. CONTROLLR ID (CtlId) This procedur e is used to identify the contr oller(s) [...]

55 1. BUILD TIME Displays the firmware Build Time of the tuner . (BTime) 2. BUILD DA TE Displays the firmware Build Date of the tuner . (BDate) 3. VERSION Displays the firmware version of the tuner . (V er) SOURCE SETUP (Sr cSu) Source Setup allows the system’ s sources to be configur ed. The following items can be found in the SOURCE SETUP menu:[...]

56 INST ALLER INST ALLA TION MENU a. Selected: Learned IR Choose Learned IR if the pre-pr ogrammed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assigned to the sour ce (LnSrc) component. (See Learning IR procedur e for instructions on how to learn IR codes.) ii. TEMPLA TE TYP[...]

57 KEY CONFIG (KeyCf) Key Configuration defines zone-specific key functions for each source. See Key Config. - Flow Chart page 70 1. ZONE NUM – Select the zone the key will be configured for . Changes are made (Zone#) for that zone only; default setting is “All Zones.” 2. SOURCE NUM – Select the source the key will be configur ed for . (Src[...]

58 INST ALLER INST ALLA TION MENU 9. SAVE CHANGES? – Select “yes” to save changes. Procedur e advances to ZONE NUM (Save?) (step 1) SOURCE NAMES (Sr cNm) This procedur e allows the installer to customize the sour ce names for the sources attached to the CAM6.6. See Source Names/V ol T rim - Flow Char t page 71 1. SOURCE NUM – Select the sou[...]

59 4. NUMERIC TEXT – Select Numeric descriptive text. (NmTxt) 5. PREFIX CMD – T ells the system whether a command will be issued prior to the (Prefx) selection of the numerical value (e.g., Disc 1,2). If “no,” procedur e advances to SUFFIX CMD (step 9) 6. COMMAND TYPE – Select the type of command (e.g., CD, TV , etc.). (CmdTp) a. Selected[...]

INST ALLER INST ALLA TION MENU i. LEARNED SRC – Select the learned source bank to be assigned to the sour ce (LnSrc) component. Procedur e advances to KEY FUNCTION (step 12) b. Selected: Unassigned The numeric IR Suffix command is cleared. Pr ocedure advances (Unasg) to SOURCE NUM (step 1) c. Selected: Default Default selects the same device type[...]

61 c. Selected: Default Default selects the same device type and device code previously (Deflt) setup in BASIC SETUP . Pr ocedure advances to KEY FUNCTION (step 4) d. Selected: Macr o: (T o build macr os, see Macro Editor page 65) i. MACRO - Macr o loads a series of commands which are pr ocessed when (Macro) activated. ii. MACRO ID – Enter the ma[...]

62 INST ALLER INST ALLA TION MENU disabled zone. If enabled, an All On command activated from another zone will turn on the enabled zone. 3. P ARTY ENABLE - This feature is either disabled or enabled. If disabled, Party Mode (PtyEn) activation from another zone will not affect the disabled zone. If enabled (default), the zone will participate with [...]

63 All sources that have power management enabled ar e initialized by a “POWER ON” command/ macr o. Power management is initialized when the first keypad is turned on or when the home theater trigger input has 12VDC present. The 12VDC trigger output is turned on when the first zone is turned on. All sources that have power management enabled ar[...]

INST ALLER INST ALLA TION MENU 6. POWER OFF CMD – T e l ls the controller to turn off the selected sour ce equipment (by (OfCmd) SOURCE NUMBER) when the last of the UNO System Keypads is turned off. If “no,” procedur e advances to SAVE CHANGES (step 10) 7. COMMAND TYPE – Select the type of source command (e.g., CD, TV , etc.). (CmdTp) a. Se[...]

65 2. KEY FUNCTION – Select the function to be learned or deleted. (KeyFn) 3. LEARN/DELETE – Select Learn IR Now or Delete IR. If Learn IR Now , a “USE (Ln/Dl) REMOTE” prompt appears. Point the learning r emote at the controller’ s IR window. If Delete IR, pr ocedure r eturns to LEARNED SRC (step 1) 4. TEST IR? – If “yes,” sends the[...]

66 b. Selected: Unassigned Selected command and subsequent commands are clear ed. (Unasg) Procedur e advances to COMMAND NUM (step 3) c. Selected: Default Default selects the same device type and device code previously (Deflt) setup in BASIC SETUP . Pr ocedure advances to KEY FUNCTION (step 6) d. Selected: Macr o: i. MACRO - A macr o can “call”[...]

67 INST ALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK # BANK NAME SA VE CHANGES? Selects character Selects character position Repeat for each character in name BANK # MEMORY # MEMORY NAME Selects character Selects character position Repeat for each character in name SA VE CHANGES? BANK NAME Procedure [...]

68 PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK NAME Procedure P eripheral Setup: C ontroller ID , Diagnostics , F actor y Init, S ystem Info DIAGNOSTICS Procedure F ACTORY INIT Procedure SYSTEM INFO Procedure Peripheral Menu This Procedure returns the Tun e r to its Factory settings Are you sure YES NO Please wait Cycle Power A[...]

69 INST ALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu Peripheral[...]

70 INST ALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu[...]

71 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS[...]

72 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS[...]

73 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS[...]

74 INST ALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu MUTE[...]

75 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS[...]

76 INST ALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu[...]

77 PERIPH SETUP Menu LED on rear CAM Panel blinks fast INST ALLER SETUP MENU FLOW CHARTS[...]

78 INST ALLER SETUP MENU FLOW CHARTS PERIPH SETUP Menu[...]

79 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS[...]

80 INST ALLER IR CODES Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 [...]

81 INST ALLER IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126 Sharp 1010 Sony 0850 Device Codes for SA T/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869 HTS 0775 Hitachi 0819 Hughes Net. Sys. 0749, 1142, 1749 JVC 07[...]

82 INST ALLER IR CODES Realistic 0203 Sony 0201, 0193 T echnics 0204 Device Codes for DVD Players: Aiwa 0641 Apex Digital 0672, 0755, 0794, 0795, 0796, 0797, 0830 Blue Parade 0571 Broksonic 0695 Daewoo 0784 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522 Go Video 0715, 0783 Gradiente 0651 Harman/Kardon 0582, 0702 Hitachi 0573, 066[...]

83 INST ALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Power Power Power On/Off Enter [...]

84 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up Disk[...]

85 INST ALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Power Power Power On/Off Enter Enter Ch[...]

86 KEY FUNCTION UNO-S1 CABLE Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up DiskU Le[...]

87 INST ALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Power Power Power On/Off Enter [...]

88 KEY FUNCTION UNO-S1 VIDEO ACC Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up Dis[...]

89 INST ALLER KEY CODES SA T/DSS KEY FUNCTION UNO-S1 SA T/DSS 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Power Power Power On/Off Enter En[...]

90 KEY FUNCTION UNO-S1 SA T/DSS Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up DiskU[...]

91 INST ALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Down Power Power Power On/Off Enter Enter Chann[...]

92 KEY FUNCTION UNO-S1 VCR Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up DiskU Lear[...]

93 INST ALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Learned Only Channel Dn Ch Dn Learned Only Power Power Power On/Of f[...]

94 KEY FUNCTION UNO-S1 LASER DISC Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up Di[...]

95 INST ALLER KEY CODES DVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, T raack 1 2 2 Digit 2, T rack 2 3 3 Digit 3, T rack 3 4 4 Digit 4, T rack 4 5 5 Digit 5, T rack 5 6 6 Digit 6, T rack 6 7 7 Digit 7, T rack 7 8 8 Digit 8,T rack 8 9 9 Digit 9, T rack 9 0 0 Digit 0, T rack 10 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute [...]

96 KEY FUNCTION UNO-S1 DVD Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up DiskU Lea[...]

97 INST ALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Preset Down Power Power Power On/Off Enter Ente[...]

98 KEY FUNCTION UNO-S1 RECEIVER Off Off Of f, Power On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up DiskU[...]

99 INST ALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Preset Down Power Power Power On/Of[...]

100 KEY FUNCTION UNO-S1 AMP/MISC AUDIO Off Off Off, Power On/Of f 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk[...]

101 INST ALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 11 Digit 1, T rack 1,Dsc1 22 Digit 2, T rack 2,Dsc2 33 Digit 3, T rack 3,Dsc3 44 Digit 4, T rack 4,Dsc4 55 Digit 5, T rack 5,Dsc5 66 Digit 6, T rack 6,Dsc6 77 Digit 7, T rack 7,Dsc7 88 Digit 8,T rack 8,Dsc8 99 Digit 9, T rack 9,Dsc9 00 Digit 0, T rck10,Dsc10 V olume Up V olUp V olume Up V olume Dow[...]

102 KEY FUNCTION UNO-S1 CD Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up DiskU Lea[...]

103 INST ALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Down V olDn V olume Down Mute Mute Mute Channel Up Ch Up Bright,Raise Up Channel Dn Ch Dn Dim,Lower Down Power Power Power[...]

104 KEY FUNCTION UNO-S1 HOME CONTROL Off Off Off, Power On/Off 1 1 1 1 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Learned Only Dim Dim Learned Only Close Close Learned Only Open Open Learned Only Halt Halt Learned Only AM/FM AM/FM Learned Only Cue Cue Learned Only Disk Up[...]

105 INST ALLER SOURCE NAMES UNO-S1 UNO-S2 Aux AUX Aux 1 AUX 1 Aux 2 AUX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Player CD 1 CD Player 1 CD 2 CD Player 2 CD 3 CD Player 3 Class Classical Compr Computer Cntry Country CustomName1 CustomName2 UNO-[...]

106 UNO-S1 UNO-S2 RepTV Replay TV Rock Rock Sat Satellite Sat 1 Satellite 1 Sat 2 Satellite 2 Sat 3 Satellite 3 SatRd Sat Radio Src 1 Source 1 Src 2 Source 2 Src 3 Source 3 Src 4 Source 4 Src 5 Source 5 Src 6 Source 6 Src 7 Source 7 Src 8 Source 8 Spcl Special T ape T ape T ape1 T ape 1 T ape2 T ape 2 Ti Vo TIVO T uner T uner UNO-S1 UNO-S2 T un 1 T[...]

107 CAM6.6 CAM6.6 Back Panel (C ontroller ID 2) CAM6.6 Back Panel (C ontroller ID 1) CAM6.6 Blues Blues RCA Cables Blues Blues UNO-S1 UNO-S1 Bluesville UNO-S2 A NTENNA Blues UNO-S1 Sharing a single CAM6.6X (internal tuner) with multiple controllers This arrangement can support up to six CAM6.6 units for up to 36 zones/6 sources. Each additional CAM[...]

CAM6.6 CAM6.6 Back Panel (C ontroller ID 2) CAM6.6 Back Panel (C ontroller ID 1) CAM6.6 UNO-S1 UNO-S1 A NTENNA A NTENNA CNBC CNBC CNBC UNO-S2 UNO-S2 Sunny Sunny Sunny SAMPLE CONFIGURA TIONS MUL TIPLE CONTROLLERS WITH TWO TUNERS System with two CAM6.6X (internal tuner) controllers The configuration below is suitable for 7-12 zones that will have acc[...]

109 RS-232 INTERFACE IR LR A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR LR A UDIO O UTPUT ST2-XM Tuner Back P anel A NTENNA CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 102.5 UNO-S1 RCA “Y” C[...]

110 RS-232 INTERFACE IR LR A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR LR A UDIO O UTPUT ST2-XM Tuner Back P anel A NTENNA CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 102.5 102.5 UNO-S1 Keypads[...]

111 TECHNICAL SPECIFICA TIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS into 8 Ohms THD+N: <0.05% Signal to Noise R[...]

112 WARRANTY & REP AIR The Russound CAM6.6 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will r eplace any defective par ts and correct any defect in workmanship without char ge for either parts or labor . For this warranty to apply , the unit must[...]

113 NOTES[...]

114 NOTES[...]

115 NOTES[...]

Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com Copyright © 2004 Russound ® . All rights reserved. 28-0112 10/07/04[...]